COMMUNICATION PROBLEM WITH SCANNER TO COMPUTER OF DESKJET 3050 j610

WHEN i TRY TO SCAN USING MY DESKJET 3050 j610 A MESSAGE SHOWS 'COMMUNICATION PROBLEM NOT CONNECTED THEREFORE i AM NOT ABLE TO SCAN.
i HAVE BEEN TRYING TO RESOLVE THIS PROBLEM OVER 8 HOURS AND I' M GETTING SICK. I'VE TRIED EVERYTHING AVAILABLE ON THE SUPPORT PROGRAMS INCLUDING 'PAINT' AND NOTHING WORKS.
I NEED A ANSWER OR I;LL THROW THIS THING OUT

I have the same problem here, i have two PC's both running Windows 7 but only one works printing and scanning wirelessly.
On the PC running Windows 7 32bit wireless printing and scanning works great.
On the PC running windows 7 64bit only wireless printing works. Havent found a solution, but just a work around. Here it is......
1. Got to you printer and hit the Wireless button to find the IP address your router gave it.
2. Open up your Internet browser and input the IP address.
and...BAM!!! if it worked it should take you to the Deskjet 3050 All-in-One J610a Embedded Web Server page and from there you can scan with what looks like all the original options if the thing was working to begin with and save to your PC.

Similar Messages

Communication problem with printer when using Parallels

OK, apologies if this has been asked elsewhere but I've been trawling the forum for an hour and have yet to find the exact problem that I'm having!
First of all, I'm a recent convert to Mac (hurrah I hear you all cry), secondly, I've set up Parallels to deal with some PC left-overs, thirdly, I've tried to use my old Dell printer and realised Dell doesn't support Macs (or not my AIO 922 anyway).
So, I thought I'd get round this by installing the drivers for the printer on the Windows partition, which all went well until I actually tried to print something... although the printer is visible and 'on-line', I get the box informing me there's a communation problem with the printer and computer.
It's beginning to wind me up so any info/advice would be greatly appreciated

This is either a Windows or a Parallels problem. For Parallels go to http://forum.parallels.com. For Windows go to the support forums at Microsoft.
There is no support for either product at these Discussions.

Communication problem with proxy server

We have establish the configuration of an iPad to access the enterprise net, but when trying to access any webpage we get the next message: Safari can not open the page. Error:"There is a communication problem with proxy web server (HTTP)"
The access has no problems with other movile devices.
Ahy help?

Hi,
I am not sure whether you have already solved the problem or not....
Do the following to deploy MobileBIService.war file on tomcat
1.Stop Tomcat Web application server.
2.Copy the file, MobileBIService.war from [Install directory]\Mobile 14\Client to the Tomcat's "Webapps" directory.
In my case, I copied the MobileBIService.war from C:\Program Files (x86)\SAP BusinessObjects\Mobile14\Client to C:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps. ( I used BO 4.0 SP02)
3. Start Tomcat.
Restarting Tomcat would automatically deploy war file as a Web App
One folder u201CMobileBiServiceu201D will appear in webapps folder when MobileBIService.war is deployed successfully.
Hope it helps.
Regards,
Ankur

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

HP officejet 6500 E709n problem with scanner

Hi
I buy HP officejet 6500 E709n i have problem with scanner when printer work wireless (when work USB or cable RJ45 it's ok). When I try scanning windows give me problem "4,[2,7,80040007),(3,7,0)]", I change drivers and still not working. I have Vista and router D'link Di-524. Please help

Hi
I am having problem scaning from printer to desk top.Please help me

I Just upgraded to mountain lion os x to 10.8.1 and I have a problem with restart my computer

I Just upgraded to mountain lion os x to 10.8.1 and I have a problem with restart my computer.
Now my computer is stuk on restart and wont turn on.
Can somone help me with it?
Thanks.

If Mende 1's suggestion doesn't solve it you might find the following useful:
I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Hope this helps

I am having problems with my old computer so syncyed my ipod to my new computer. all the appliance/games synched but not my music. I have somehow manged to wipe all my music from my ipod and it will not synch with my music libary from my old computer

Hi
I am having problems with my old computer so syncyed my ipod to my new computer. all the appliance/games synched but not my music. I have somehow manged to wipe all my music from my ipod and it will not synch with my music libary from my old computer. Any suggestions.

? Anyone have any suggestions?

"The HP Deskjet 3050 J610 series was not found." Can't scan with wireless printer to desktop. Help

Our new wireless printer will not scan. I have tried to scan from the computer and get the below error message and then I have activated the scan from printer and when I push the scan button on the printer, I get the same error message.
Thanks!
Product Name: HP Deskjet 3050 J610 Printer/Scanner/Copier
Operating System: Windows 7
Error Message: The HP Deskjet 3050 J610 series was not found - when trying to scan.
No changes made to system

I had some problem. I found you must use HP 'Update IP address' program to add printer instead use window add printer. All programs -> HP ->HP Deskjet 3050 610 series -> Update IP address.

My Deskjet 3050 J610 will not connect to my Virgin WiFi router for use with Apple Mac laptop.

I live in the UK and have Broadband access via a Virgin connection and WiFi router. My Apple MacBook laptop connects to the WiFi with no difficulties. However I have an HP Deskjet 3050 J610 printer which will not connect to the router. When I try to connect, the blue light just keeps on flashing but a connection is not found. Consequently my MacBook cannot "see" the printer on the network. Any suggestions? Thanks!

See if this helps.
Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Deskjet 3050 J610 Wireless Setup Problem - Thinks I'm using MAC filtering

I just got an HP Deskjet 3050 J610 from my parents, who have never used it. The ink cartridges were still in their wrappers. Trying to set it up tonight, and everything was going well until I tried connecting it to the wireless network.
My router does not have WPS, so I'm having to do this via USB. The software is able to detect my router's SSID, encryption type, and password. However, when trying to connect the printer to the router, it fails. The Wireless Network Test Report claims that it might be because of MAC address filtering. I double checked my router settings, and I am NOT using MAC filtering at all. I have not yet tried rebooting everything (Printer, laptop, router), but I am doubtful that will resolve the issue. For security reasons, I would prefer not to say what security I'm using, but I will say that it IS supported by the printer.
I'm using Windows 7 on an Asus laptop, and my ISP is Verizon Fios.

Hi Manjunath, I spent the last hour on that site. Everything I found was about how to add the printer's MAC address to the router's filter settings. But I repeat, I am NOT using MAC filtering on my router, but the printer thinks I am.
Or rather... THOUGHT I was.
Rebooting the printer and the router helped. Of course, I did both at the same time, so I'm not sure which one was required, or both, but the long and the short of it is, it works now.

Deskjet 3050 J610 will not install on Mavericks or new Router

I have had a deskjet 3050 J610 for a couple years and it has worked fine with our MacBook Pro (with the exception of updates) . We recently restored our MacBook and added Mavericks. We also have a new netgear modem/router. We can not connect the printer to our network or to the laptop wirelessly. Here is what has happened so far after spending hours attempting everything we could find online with no sucess......
-I can print from the Mac with a USB cable connected to printer
-I've restored the printers default settings
-Printed the HP Network Configuration Page and it shows our Network
It says my HP printer cannot find the access point.
Everything passed except network name found....this failed
Network status-Offline
embedded web server-http://0.0.0.0 I can't even get to the webpage
network name (SSID)-HPJ610a.0798A0
ip address-not applicable
The blue light for wireless flashes on printer.
When I go to Wireless Menu it says wireless radio is on.
My next option is Settings, Under Settings I have Disable, WPS and Defaults.
Under WPS I get Push Button or PIN......neither worked.
Printer DOES NOT have a wireless setup wizard!
I have checked for updates on the Mac and do not have any (Original CD not compatible with Mavericks). When I go to System Preferences-Print/Scan, it shows the printer as disabled. I tryed downloading software & drivers from HP's website, but when I go to my Applications menu, there is not an HP folder/icon.
PLEASE HELP!!

Hi,
Currently a full feature software is not available for your products for Mavericks, however there are some other workarounds to connect the printer to your network.
Please follow these steps to create a temporary ad-hoc connection and then set the wireless connection through the printer's EWS page:
On the printer click on Wireless, then select Reset Wireless.
Turn the printer Off and back On.
If the wireless light is not blicking, click the wireless button and turn the Wireless Radio On.
From your Mac click the Wireless icon and then on Join Other Networks.
Click on Show network and connect to the printer SSID which includes J610 as part of its name.
Note: Allow 1-2 minutes to fully establish the temporary connection.
Open Safary, then click the Bonjour menu and select the listed Deskjet 3050.
Note: if there is no Bonjour option at the top menu, click Safary > Preferences > Advanced and check both of the Include Bonjour options at that screen. click OK and the Bonjour menu will appear.
Go to Network / Wireless and follow the Wireless Setup Wizard to connect the printer to your home network.
On your Mac click the WiFi icon and reconnect the Mac to your home network.
Now both your Mac and the printer are connected to your network, go to Printers & Scanners and add the printer by clicking the plus sign.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Windows 8.1 and Deskjet 3050 J610 Software not working

New Desktop running WIndows 8.1 and the HP Deskjet 3050 J610 printer/scanner. I can load the drivers to make the printer work but the scanner software is not present.
When I try to open the Scanner Software:
I get the following:
Would like a fix. Been fighting with this for a while.

ClasicD_72,
It appears that one of our Experts is trying to answer your inquiry on another member's Thread on this subject.
I will comment briefly here and then withdraw.
Commentary
After installing the Full Feature Software, at least in many cases involving Windows 8.1 installs of the printer software, you should see a Printer Assistant shortcut on your Desktop. You can use the Printer Assistant to access the Scan to Document or Photo software package.
Although there is a scan program within the hierarchy of many of the Printer software folders, I have not seen an recent instance where the scan program is a stand-alone executable. In other words, you must call the Scan package from a parent program, even assuming you can find a "Scan" program in Bin or another similar folder.
Example:
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

I cant find the printer code on my HP deskjet 3050 J610 all-in-one printer

I have disconnected wireless and turned off printer and turned on and re connected. I have changed DNS to 8888 and secondary to 8844. I have printed out 5 Network configuration pages and 4 Printer status reports and NOTHING has the printer code on it. How can I get one? Thanx, Anna
This question was solved.
View Solution.

Hi Anna,
I afraid the Deskjet 3050 (J610) does not support any web service as ePrint or Print Apps.
Only the Deskjet 3050A (J611) support ePrint as you may find listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=us&dlc=en&lc=en&product=5063582&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error when trying to scan from my HP DeskJet 3050 J610 (com.apple.ImageCaptureCore -9929.)

When trying to use my HP DeskJet 3050 J610 series I get an error (com.apple.ImageCaptureCore -9929.) It can't scan. Anyone know how to fix it?

The error is ICReturnScannerFailedToSelectFunctionalUnit, but I am not sure what that means. Is there an HP disgnostic available? Are the drivers current? Maybe HP has some experience with this error.

Communication Problem with the second battery

Hello,
In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
Thanks Lina

Hi, Lina
What is the machine type and model of your computer? Also, what operating system are you running?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

COMMUNICATION PROBLEM WITH SCANNER TO COMPUTER OF DESKJET 3050 j610

Similar Messages

Maybe you are looking for