Como puedo liberar memorya de forma eficiente en un mac book air?, como puedo liberar memorya de forma eficiente en un mac book air?
Hola, podríais ayudarme en descifrar como puedo liberar memorya de forma eficiente en un mac book air?
Hola, podríais ayudarme en descifrar como puedo liberar memorya de forma eficiente en un mac book air?
Similar Messages
-
necesito ayuda , el Itunes me dice que no tengo espacio para sincronizar mi Iphone 5s , y se que en memoria del Iphone tengo disponible almenos 1.5 gb , Que puedo hacer
En este articulo se tratan los pasos más habituales para solucionar diversos problemas con los que te podrías encontrar al crear o utilizar tu cuenta de iCloud:
iCloud: Account troubleshooting -
How can I make my mac book pro read a SDHC memory card
Can someone tell me how to make my mac book pro read an SDHC memory card?
http://support.apple.com/kb/HT3553
-
When I try to load a second book it says out of memory. How many books can be read at one time?
Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds. -
My 2008 Mac Pro is no longer recognizing memory in the B card. Is it simply a defective card or should I look elsewhere for an answer? It was working unntil sometime early this year. Thank you for any enlightenment you can provide.
I'm not sure I understand. You swapped the A and B modules. The B module does not show up in the A modules slot? That would indicate the module is bad. If the A module doesn't show up in the B module's slot, then the slot is bad.
-
I encountered this problem on our SQL2012 and I have tried different scenarios (see below) to no avail. I have decided to give up and check if someone here has encountered this and resolved it.
One thing I know, it's not a memory issue. Both servers we're using has lots of memory to spare and we monitor the memory as the replication goes through it's steps.
I hope someone can help me on this. Thanks!
The Error:
The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.
Our Scenario
We're using SQL Server 2012 SP1. All subscriptions are pull based.
We're using direct Merge Replication (not FTP or web sync)
We already have 10 active replications with larger databases. Only 1 has this issue.
Database size is less than 5 GB
Rebuilding the publisher is not an option.
What have I tried?
There is no memory problem --- we have lots to spare
I have tried re-initialization of the database. Same problem.
I tried deleting the database and reinitializing it. Same problem
New snapshot. Same problem.
I tried changing the subscriber server but still same issue.
MCP, MCSD, MCDBA (ANXA)Here is the result for the sp_configure on our subscriber. We're doing a pull on the server with the issue.
name
minimum
maximum
config_value
run_value
max server memory (MB)
128
2147483647
2147483647
2147483647
In addition, I made a comparison between the working servers and the one with the issue -- there seems to be a difference in the service pack. Publisher has none but the subscriber is operating on SP1. But still strange as only 1 database is affected.
MCP, MCSD, MCDBA (ANXA) -
I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?
Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
You need to install a third party program that will read the NTFS format.
There is various software from PARAGON, Tuxera and NTFS-3G
When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and... -
HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS
No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton -
I have been creating forms in InDesign and pulling into Acrobat XI Pro to do form fields. My client would like to fill in the PDF form using Reader, save under a different name locally on their device, and redistribute. The problem I have is that, sometimes, they want to redistribute the form as Read Only. I know how to flatten the form on a mobile device, but uncertain how they can do that with a PC or Mac using Adobe Reader. I looked at FormsCentral thinking there might be a solution going that route, but don't believe there is. Any advice?
FormsCentral won't help with flattening a form. You could set up the form in Acrobat so that the fields are set to read-only, using JavaScript. Not quite the same as flattening but it's the best Reader can do.
Note that when Reader is used to e-sign a document, it gets flattened, but this won't be possible if you need to Reader-enable the form and under certain other conditions. -
With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?
I have developed a form with fields hidden by default, that become visible based on box ticked or radio button selections.
My problem is that, when I close the form and re-open it, it comes back to it's default presentation, regardless of the information already recorded in the form (including in the now hidden fields.
How to correct that
Thanks in advance for any hint you can provide.I've had the same problem. This solved it...
Go to the "Form properties..." in the File-menu. Select "Run-time" to the left and in the box "Scripting" Preserve scripting changes to form when saved: choose Automatically (Script-based state changes are saved locally in an insecure fashion. This option cannot be used for certified forms).
Hope it works for you to... -
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I am wanting to add picture and designs to my form how do I place it in a specific place on my form?
I am wanting to add picture and designs to my form how do I place it in a specific place on my form?
Currently we only support one field/item on a line. We are working on adding a feature that allows you to put multiple fields/items on a single line. We hope to have that out in a few months.
Randy -
Am signed in to Adobe and trying to edit a form. Can pull up form but it will not allow me to edit the form. What am I doing wrong?
To elaborate on what Sukrit posted, it is likely that the form is not an Acrobat forum but a Designer form or was set for distribution and is locked for editing. I suspect it was probably created in Designer and thus can only be completed in Acrobat or Reader since the PDF is really container for and XML structure and does not have the basics of a PDF document. If that is the case, you either need Designer or you can print to a new PDF and use the field recognition feature of Acrobat to recreate the form. Of course, the latter will require some editing to the form fields in most cases.
-
I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?
Currently, Adobe Reader for Android does not provide an option to disable auto-save.
In the Reader home screen (where your files are displayed), you can make a copy of the original PDF document, open the copy (instead of opening the original document), make changes to the copy. Once you email the copy, you can delete it.
For more information, please see Help > How To... > Copy, edit, delete, manage.
Although it is not the most convenient way to accomplish the task, that's the only feasible workaround that is available in Adobe Reader for Android right now. -
where did my pics go. Transferred 40-50- pic from camera memory card to Mac via slot; lost pics on memory card and unable to find anywhere in Mac. May have gone to Open Office as Data . Is that possible and if so can I get pics back or if not so ,where could they be????
First place to check is in the iPhoto library. If the images were imported there then they will be visible in the previews created.
The physical location of image files in iPhoto is quite buried in folders within folders. So, if you want to copy them then select all of the ones needed from the previews and copy from iPhoto to a new location, preferably a new folder in the Pictures folder.
The other app that might have transferred the files is Image Capture. It would download files from cards or cameras. Launch this app and look in the preferences to see the default location of transferred files. -
Address book capacity or amount of memory per entry
I am working on a project that would add a shared database of contacts to a variety of handhelds.
After searching this forum and others I can see that the address book capacity seems dependent on the onboard memory.
Can any tell me or direct me to an estimate of the amount of handheld memory required per contact?
Ideally, I would like to get the memory per contact and the memory per contact w/attached photo.
right now the database is Name, home address, DOB, notes, and User1-3. Adding a photo is kind of pie in the sky considering that I don't have the photo files yet, but it seems a natural evolution of my project so...
Post relates to: Palm TXI'd suggest you ask this question over at the Access Developer Network forum. We're mostly End-user centric here!
ACCESS Developer Network
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Maybe you are looking for
-
Audio crossfade tool doesn't work?
Hi , Maybe its a well known bug but reading in the Apple pro training book by Martin Sitter , I noticed that the fade tool in the Arrange window doesn't work. Or am I doing something wrong? (B.t.w. This tool isn't discribed in the standard manual??)
-
Hi expets I would like to have contact with someone that uses EBP-SUS and replicate vendor from EBP to SUS in a scenario two clients. My problem is when I try to replicate vendor to SUS the BP is not created in SUS. I would like to know if I need to
-
Corrupted Query Designer with strange External Restriction
Dear Experts, I have a dilemma with query, when I run the query in RSRT and debug it with OLAP, in the restriction side it appears to restrict the query with two Attributes which are not even used in my query not also their master-data. I have create
-
what's the benifit of creating logical copies of objects in database , how do we create them. Neo
-
EA2 right click to open SQL file/opening file creates new connection
EA2, win XP pro, sp2 1. Right click to open an existing SQL file missing from the context menu. 2. Even after I set my default path to look for scripts, it opens in Documents and Settings\USERID\Application Data\SQL Developer 3. When I open a new fil