Compaq nx6110 the mouse start all program by it self

compaq nx6110  ican not cotrol the mouse its starting all the programs in the screen by it selef and peeping. thanks

Hi binmous,
Very strange issue you've posted here, let's try a few things to get the mouse to work... I will post a few questions to start out:
1. Which version of windows do you have?
2. Has anything changed that may have caused this? An update or other newly installed software?
3. Is it a wireless or usb wired mouse?
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Similar Messages

  • I can not find mozilla firefox folder in Start All Programs how can i open firefox in safe mode i am using win7 and firefox 4.ob10 ?

    i can not find mozilla firefox folder in Start>All Programs> how can i open firefox in safe mode i am using win7 and firefox 4.ob10 ?

    A quick workaround - Go to Start > Run, and paste this in the box: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode

  • Flash Player doesn't appear on "Start all programs" even after installation completed.

    Hello,
    I downloaded FlashPlayer 11(latest) and installed.
    Installation progress bar reached end that seemed to complete.
    But FlashPlayer doesn't appear on windows "Start > all programs".
    There is no "FlashPlayer" folder under "Program files  > Adobe" as well.
    Would anybody help?
    What is missing or wrong on my installation?
    Thanks,
    togayan

    But FlashPlayer doesn't appear on windows "Start > all programs".
    There is no "FlashPlayer" folder under "Program files  > Adobe" as well.
    Right.... becuase it ISN'T a program... it's a PLUGIN for your browser.  You'll find it in:
    Internet Explorer - Tools (the little "gear" icon)>Manage Add-ons
    Firefox - Tools>Add-ons - under the Plugins Tab

  • I synced about 50 books to my new ipad air 2.  When I click any other books, the sync starts all over again for all books (it shows 51 books syncing).  If I abort the sync, all of a sudden, all books are gone from my ipad.  I don't know why.

    I synced about 50 books to my new ipad air 2.  When I click any other books, the sync starts all over again for all books (it shows 51 books syncing).  If I abort the sync, all of a sudden, all books are gone from my ipad.  I don't know why.  I did not have this problem on my old ipad...or before I upgraded to the latest version of iTunes.  Any help would be greatly appreciated.

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • Every time I turn my computer on it starts freaking out. The mouse starts moving on its own along with windows coming up and moving off the screen. Also the windows get bigger on their own and the screen slides around like some one else is doing it.

    I have checked for viruses, restarted it and nothing works. It doesn't do it all the time just most of the time now.

    Try resetting your PRAM by restarting, then holding <CMD>+<OPTION>+p+r until you hear the start up chime twice, then release the keys and allow to boot up.
    If that doesn't work try resetting the SMC:
    http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US
    If those two items don't help take your machine  to your nearest Apple store and see if they can assist.

  • HT201442 iOS: Restore error 3194 or 'This device isn't eligible for the requested build', all program downloaded but till showing same problem, kindly suggest me

    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • I would like to adjust the items in the "all programs" menu and group some together.

    From "start" "all programs" the menu that comes up is too crowded and some like microsoft office have another menu of the programs grouped under microsoft office. I would like to know how to group programs under a heading. There is probably a simple solution. But I haven't run across it yet.

    Sorry, that isn't a Firefox support issue.
    http://lounge.windowssecrets.com/index.php

  • Will not start all the way

    How do you fix an ipod that will begin to start, but never does?
    It will begin to start, with the apple logo, but then you hear the hard drive click off then the screen goes blank. It has been repeating this for about an hour now.
    Ive tried resetting and restoring, but I cant get it to do anything but cycle through the apple logo screen.

    How do you fix an ipod that will begin to start, but
    never does?
    It will begin to start, with the apple logo, but then
    you hear the hard drive click off then the screen
    goes blank. It has been repeating this for about an
    hour now.
    Ive tried resetting and restoring, but I cant get it
    to do anything but cycle through the apple logo
    screen.
    I think i am having the same problem the logo will apple logo will pop up and after 15 mins a language choice pops up when I chose that i get to the normal menu but when i plug it into my computer it isnt recognized. In disk mode i can only get it recognized in "my computer" and soon after freezes and the fun starts all over again
    Sony Vaio   Windows XP   5th Gen 30GB iPod

  • Bluetooth keyboard K810 and mouse T630 at the same time, repeating keys and mouse starts to stutter

    I use a Lenovo Thinkpad Tablet 2, Windows 8.1(core edition), x86 (32bit).
    If I pair a Bluetooth keyboard K810 and mouse T630 at the same time, with Wifi On, the keyboard starts repeating the keys and the mouse starts to stutter. Especially if WiFi is under load (when downloading something).
    This doesn’t happens if I pair only the keyboard, or if I pair mouse and keyboard with Wifi OFF.
    If I pair a Bluetooth keyboard and use a USB mouse with Wifi ON, everything works fine.
    If I pair a Bluetooth mouse and use a USB keyboard with Wifi ON, everything works fine.
    I think it is an issue with two Bluetooth devices paired at the same time with Wifi ON.
    So here is a summary:
    BT mouse and BT keyboard / Wifi ON ----> repeating chars and the mouse starts to stutter (bug)
    BT mouse and BT keyboard / Wifi OFF ----> works fine
    Only BT keyboard / Wifi ON ----> works fine
    Only BT mouse / Wifi ON ----> works fine
    USB mouse and BT keyboard / Wifi ON ----> works fine
    USB keyboard and BT mouse / Wifi ON ----> works fine
    Where is the problem? Is there any solution?
    Solved!
    Go to Solution.

    I have solved the problem. In the Wlan-Drives-Settings there is the "Bluetooth Collaboration" option. I put the value to "Disable" and now works everything like charm.
    Best regards, jC
    Broadcom manual:
    Bluetooth Collaboration
    Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.

  • Macbook 10.6.8 the mouse keeps jumping around and also gets stuck and won't move at all, HELP

    I have a macbook 10.6.8 and the mouse is malfunctioning. It is jumping around without me touching the trackpad, and then at times I can't move the mouse at all. Has this happenned to anyone and what do I do?

    An irratic trackpad can be a symptom resulting from a swollen battery as these can expand then press upward toward the trackpad area and affect its function. If it is tight and ill-fitting, that may be the problem. These can open and leak stuff, too; so to see if an Apple Store genius or other expert can help determine that is the issue, and to get a replacement if it is, would be important.
    Unplug AC before removing, be sure MacBook is shut down. If bad, leave it out.
    Check the computer w/o battery to see if the trackpad issue changes.
    Have you tried the computer with a USB mouse (if the battery looks OK when removed & inspected to see if the sides are flat when set against a table top) to see if the same kinds of odd behavior continue, even if you go into the Trackpad preference panel and have the input ignored in the settings?
    I use a wired USB mouse with my MacBook but do not have the trackpad settings on ignore input. Mine does not have the original battery, and I do remove these on occasion and look in the compartment to check it.
    And then there's this. Worth mentioning, but doesn't seem likely...
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation:
    http://support.apple.com/kb/ts1449
    Hopefully something simple is behind this.
    Good luck & happy computing!

  • The mouse is frozed

    hey
    i have the mouse Logitech mx500.
    i worked according the wiki (http://wiki.archlinux.org/index.php/Get … ns_Working)
    about month ago the mouse start to frozed.
    any idea?
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder3) Wed Jun 13 18:40:26 PDT 2007
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # Files section. This allows default font and rgb paths to be set
    # Server flags section.
    # Input devices
    # Core keyboard's InputDevice section
    # Core Pointer's InputDevice section
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    # Device configured by xorgconfig:
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "ServerLayout"
    # The Identifier line must be present
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    Identifier "Simple Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Evdev Mouse" "CorePointer"
    ##InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    # This loads the DBE extension module.
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # This loads the font modules
    # Load "type1"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    Load "dbe" # Double buffer extension
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    Load "freetype"
    # Load "xtt"
    EndSection
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    ### Identifier "Keyboard1"
    ### Driver "kbd"
    ### Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    ### Option "XkbRules" "xorg"
    ### Option "XkbModel" "pc101"
    ### Option "XkbLayout" "us"
    ### Option "XkbVariant" "uss"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us,il"
    Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
    EndSection
    ##Section "InputDevice"
    # Identifier and driver
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    ## Identifier "Mouse1"
    ## Driver "mouse"
    ## Option "Protocol" "Auto" # Auto detect
    # # Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    ## Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    ##EndSection
    Section "InputDevice"
    Identifier "Evdev Mouse"
    Driver "evdev"
    Option "Name" "Logitech USB-PS/2 Optical Mouse"
    Option "CorePointer"
    EndSection
    #Section "InputDevice"
    # Identifier "Mouse1"
    # Driver "mouse"
    # Option "Protocol" "Auto" # Auto detect
    # Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    #EndSection
    Section "Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier "793df"
    HorizSync 31.5 - 64.3
    VertRefresh 50.0 - 70.0
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "DELL 2007WFP"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 76.0
    EndSection
    Section "Device"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    Identifier "Standard VGA"
    Driver "vga"
    VendorName "Unknown"
    BoardName "Unknown"
    EndSection
    Section "Device"
    # unsupported card
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    Identifier "7600ga"
    Driver "nvidia"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7600 GS"
    EndSection
    Section "Screen"
    Identifier "Screen 1"
    Device "7600ga"
    Monitor "793df"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "1024x768_85 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "1680x1050_60 +0+0; 800x600 +0+0; 640x480 +0+0"
    EndSection
    dmesg
    Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
    BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
    BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
    BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    1150MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f5940
    Entering add_active_range(0, 0, 524000) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 524000
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 524000
    On node 0 totalpages: 524000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2301 pages used for memmap
    HighMem zone: 292323 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI 2.4 present.
    ACPI: RSDP 000F7620, 0024 (r2 Nvidia)
    ACPI: XSDT 7FEE30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: FACP 7FEEC480, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: DSDT 7FEE3240, 91E0 (r1 NVIDIA AWRDACPI 1000 MSFT 3000000)
    ACPI: FACS 7FEE0000, 0040
    ACPI: HPET 7FEEC680, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
    ACPI: MCFG 7FEEC700, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: APIC 7FEEC5C0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:11 APIC version 16
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 15:11 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x10de8201 base: 0xfefff000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
    swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
    Built 1 zonelists in Zone order. Total pages: 519907
    Kernel command line: root=/dev/sda2 ro vga=795
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2009.278 MHz processor.
    spurious 8259A interrupt: IRQ7.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2071656k/2096000k available (2445k kernel code, 23060k reserved, 817k data, 296k init, 1178496k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0435000 - 0xc047f000 ( 296 kB)
    .data : 0xc0363479 - 0xc042fa5c ( 817 kB)
    .text : 0xc0100000 - 0xc0363479 (2445 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    Calibrating delay using timer specific routine.. 4022.62 BogoMIPS (lpj=6701795)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 0(2) -> Core 0
    CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4020.99 BogoMIPS (lpj=6697594)
    CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 1(2) -> Core 1
    CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
    Total of 2 processors activated (8042.61 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    Brought up 2 CPUs
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    PCI: No mmconfig possible on device 00:18
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:06.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
    ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
    ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
    ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    Time: hpet clocksource has been installed.
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    pnp: 00:01: ioport range 0x1000-0x107f has been reserved
    pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
    pnp: 00:01: ioport range 0x1400-0x147f has been reserved
    pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
    pnp: 00:01: ioport range 0x1800-0x187f has been reserved
    pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
    pnp: 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
    pnp: 00:0c: iomem range 0xcde00-0xcffff has been reserved
    pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
    pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
    pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
    PCI: Bridge: 0000:00:06.0
    IO window: disabled.
    MEM window: fde00000-fdefffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0a.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0b.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0d.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0e.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0f.0
    IO window: a000-afff
    MEM window: fa000000-fcffffff
    PREFETCH window: e0000000-efffffff
    PCI: Setting latency timer of device 0000:00:06.0 to 64
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    PCI: Setting latency timer of device 0000:00:0f.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 1746k freed
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:07:00.0
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0a.0:pcie00]
    Allocate Port Service[0000:00:0a.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0b.0:pcie00]
    Allocate Port Service[0000:00:0b.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0c.0:pcie00]
    Allocate Port Service[0000:00:0c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0d.0:pcie00]
    Allocate Port Service[0000:00:0d.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0e.0:pcie00]
    Allocate Port Service[0000:00:0e.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0f.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0f.0:pcie00]
    Allocate Port Service[0000:00:0f.0:pcie03]
    vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 262144k
    vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    vesafb: protected mode interface info at c000:c300
    vesafb: pmi: set display start = c00cc336, set palette = c00cc3a0
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 296k freed
    libata version 2.21 loaded.
    pata_amd 0000:00:04.0: version 0.3.9
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    scsi0 : pata_amd
    scsi1 : pata_amd
    ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
    ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
    ata1.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66
    ata1.00: configured for UDMA/66
    ata2: port disabled. ignoring.
    scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.23 PQ: 0 ANSI: 5
    sata_nv 0000:00:05.0: version 3.5
    ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:05.0 to 64
    scsi2 : sata_nv
    scsi3 : sata_nv
    ata3: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 16
    ata4: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 16
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:05.1[b] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:05.1 to 64
    scsi4 : sata_nv
    scsi5 : sata_nv
    ata5: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001c800 irq 17
    ata6: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001c808 irq 17
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata6.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
    ata6.00: 488397168 sectors, multi 1: LBA48
    ata6.00: configured for UDMA/133
    scsi 5:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:05.2 to 64
    scsi6 : sata_nv
    scsi7 : sata_nv
    ata7: SATA max UDMA/133 cmd 0x0001c400 ctl 0x0001c002 bmdma 0x0001b400 irq 18
    ata8: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001b802 bmdma 0x0001b408 irq 18
    ata7: SATA link down (SStatus 0 SControl 300)
    ata8: SATA link down (SStatus 0 SControl 300)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.1: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.1
    ehci_hcd 0000:00:02.1: irq 19, io mem 0xfe02e000
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
    sd 5:0:0:0: [sda] Write Protect is off
    sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
    sd 5:0:0:0: [sda] Write Protect is off
    sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 <<6>usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    sda5<6>hub 1-0:1.0: 10 ports detected
    sda6 >
    sd 5:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 10 ports detected
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 1-4: new high speed USB device using ehci_hcd and address 3
    usb 1-4: configuration #1 chosen from 1 choice
    hub 1-4:1.0: USB hub found
    hub 1-4:1.0: 4 ports detected
    usb 1-6: new high speed USB device using ehci_hcd and address 4
    usb 2-1: new low speed USB device using ohci_hcd and address 2
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
    ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    forcedeth: using HIGHDMA
    usb 2-1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    eth0: forcedeth.c: subsystem: 01043:8239 bound to 0000:00:08.0
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    input: Power Button (FF) as /devices/virtual/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /devices/virtual/input/input4
    ACPI: Power Button (CM) [PWRB]
    ACPI: Fan [FAN] (on)
    ACPI: Thermal Zone [THRM] (40 C)
    PPP generic driver version 2.4.2
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sd 5:0:0:0: Attached scsi generic sg1 type 0
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
    i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
    ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:06.1[b] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:06.1 to 64
    rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k
    parport_pc 00:09: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    lp0: using parport0 (interrupt-driven).
    input: PC Speaker as /devices/platform/pcspkr/input/input5
    ppdev: user-space parallel port driver
    EXT3 FS on sda2, internal journal
    ReiserFS: sda3: found reiserfs format "3.6" with standard journal
    ReiserFS: sda3: using ordered data mode
    ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda3: checking transaction log (sda3)
    ReiserFS: sda3: Using r5 hash to sort names
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    fuse init (API version 7.8)
    Linux agpgart interface v0.102
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
    ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:07:00.0 to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
    it87: Found IT8716F chip at 0x290, revision 0
    it87: in3 is VCC (+5V)
    it87: in7 is VCCH (+5V Stand-By)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present

    You should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
    You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package.

  • I can't upload Yosemite every time I put in password and click on "continue" the dropbox starts to vibrate ?

    everytime I try to update to Yosemite and put in my password and go to click on "continue" the dropbox starts to vibrate.
    Tried this at least 10x

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Wireless printer is setup, but the HP Installer Setup program is in a never-ending loop

    Wireless printer is setup (HP Officejet 4500), but the HP Installer Setup program is in a never-ending loop.  It says "Fatal error during installation." and keeps trying to uninstall/reinstall/ etc etc etc.  Printer is setup and runs fine, just need to get rid of this crazy loop - any guidance?
    Dee
    This question was solved.
    View Solution.

    Which OS is installed?
    I recommend that you uninstall the printer software from the HP folder in start-->All Programs -->HP --> uninstall software
    After the uninstall is completed and your system restarted install and configure the printer again.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • After installing Elements 11 the Quick Start tab is missing?

    i installed and paid for elements 11 but now i cannot access the program. the quick start tab is missing. I cant start the program but i still have the files?

    mrspecialk
    I think that the answer will end up being a complete uninstall reinstall of Premiere Elements 11 to default computer location if you have installation files or installation disc. But, please read the following first.
    Thanks for the additional information. The following is going to be based on the information supplied, that is,
    Premiere Elements 11 is definitely installed on your computer as evidenced by its presence in Control Panel/Installed Programs List
    Windows 7 32 bit computer
    You say that you cannot find a desktop icon for Premiere Elements 11 after installation.
    I will ask again just so that I do not take anything for granted...if you click on Start, All Programs, do you see "Adobe Premiere Elements 11" listed anywhere?
    You say that you cannot find the following two files on your computer. It appears that you are using the search function of the computer to look for
    Adobe Premiere Elements 11.exe
    and
    Adobe Premiere Elements.exe
    Instead of the Search for find those files, can you take the longer route and follow the path to them folder to folder. I have Premiere Elements 11 on Windows 7 64 bit, not 32 bit, but I believe this will be the path to follow folder by folder clicking
    Computer
    Local Disk (C:)
    Program Files Folder
    Adobe Folder
    Premiere Elements 11 Folder
    and, inside the Premiere Elements 11 Folder should be the two .exe files that you seek. Scroll down line list of folders and files there to find it.
    Do you find the two .exe files there?
    If not, then I would suggest that you go to the Control Panel and uninstall Premiere Elements 11.
    Then reinstall Premiere Elements 11, making sure that you let it install to the default location of the program.
    Then look for the desktop icon and those two .exe files again to confirm that the program has installed correctly.
    Please let us know the results.
    Thank you.
    ATR

  • X needs the system to be booted with the mouse unplugged

    Hi,
    Something really strange is happening since the first time I installed arch on my machine: as I start the X server, it begins running the mouse-wheel, even if I do not touch the mouse at all. It starts slowly and then it accelerates over and over. It is really annoying since I see all my desktops flashing all around the screen, cannot see web pages cause they auto-scroll upwards and neither can use any kind of menu..
    Today I stated that if I start the computer leaving my mouse unplugged, then start the X server and plug the mouse in, it works properly.. I think it is some kind of mouse detection issue into the driver but do not know how to handle it.
    I re-installed the whole thing about 5 times because of this, at first It started occurring after an upgrade, but other times the problem occurred almost randomly..
    I think this is an arch-only related issue, since I used ubuntu, gentoo, and windows with no problem at all..

    please post /var/log/Xorg.0.log

Maybe you are looking for

  • How do I transfer my music from one PC to another?

    How do I transfer iTunes music from one PC to another?

  • Invoice Date on Aging Report (system)

    The canned aging reports do not provide Document Date.  It does provide the Invoice or Credit Memo Document Number, we need it to pull the date of these documents as well.  Every customer of ours is seeking the same information on the aging reports a

  • Transport of Alert Rules across the XI landscape

    Hi, We have created around 30 alert rules in our XI development environment (in the runtime workbench) and we would like to replicate the same across all the subsequent XI environments in our landscape. We want to avoid creating the alert rules manua

  • Can't start Report Server

    Dear all, I have an envirnment that have Both of the Database (11g) and the Application Server (10gR2) are installed in the same machine. i installed only forms and reports components from the application server and the forms are working well through

  • WM stock updating without TO

    Hi friends, I have an issue regarding transfer orders. When i am returning material to a subcontractor via return delivery, a material document is posted and a TR is created for the same. When i go to the WM stocks i dont find the stock in WM, the st