Compare a value with list

Hi.,
I am using jdeveloper 11.1.1.5
I had used this code in my AMImpl method
    public void updateFinYrs (){
        System.out.println("*************");
        getDBTransaction().setLockingMode(DBTransaction.LOCK_NONE);
        ViewObject vofy = this.getFinYears1();
        Row vofyr = vofy.getCurrentRow();
        List schclasslist = new ArrayList();
        RowSet glacclrs = findViewObject ("FinYears1").getRowSet();
        for (Row vofyr1 = glacclrs.first();vofyr1!=null;vofyr1 = glacclrs.next()){
            if (vofyr1.getAttribute("FyStatus").equals("U")){
                schclasslist.add(vofyr1.getAttribute("FyYear"));
        System.out.println (schclasslist.toString());
        if (schclasslist.equals(null)){   //In this i need to check whether the list s null
            vofyr.setAttribute("FyStatus","U");
        this.getDBTransaction().commit();
    }For me if schclasslist is not equal to null then also it staisfies the condition

Thank you suresh,jhon and jabr
I dont know wer i am goin wrong This is the scenario i am trying to do
I am trying to update a table when schclasslist is empty so that i used this code in my AMIMpl Method
public void updateFinYrs (){
        System.out.println("*************");
        getDBTransaction().setLockingMode(DBTransaction.LOCK_NONE);
        ViewObject vofy = this.getFinYears1();
        Row vofyr = vofy.getCurrentRow();
        List schclasslist = new ArrayList();
        RowSet glacclrs = findViewObject ("FinYears1").getRowSet();
        for (Row vofyr1 = glacclrs.first();vofyr1!=null;vofyr1 = glacclrs.next()){
            if (vofyr1.getAttribute("FyStatus").equals("U")){
                schclasslist.add(vofyr1.getAttribute("FyYear"));
        System.out.println (schclasslist.toString());   //In this line i am getting values as 200809
        if (schclasslist .isempty()){   //It means that the condition is not satisfied
            vofyr.setAttribute("FyStatus","U"); //This line must not get executed
        this.getDBTransaction().commit();
    }But in my output that lines get executed and updated in the DB
Could any body pls help me

Similar Messages

How can I compare single value with multiple value...

Hello,
I want to compare one value with multiple values, how can it possible ?
Here in attachment I tried to design same logic but I got problem that when I entered value in y that is compared with only minimum value of x, I don't want that I want to compare y value with all the x value and then if y is less then x while loop should be stop.
I want to do so because in my program some time I didn't get result what I want, for example x values is 4,5,6,7,8 and y value is suppose 6 then while loop should be stop but here it consider only minimum number and its 4 here so while loop is not stop even y is less then 7 and 8. So I want to compare y value with all the entered values of x and if y is less then any of x values then while loop should be stop and led should be ON.
Please guide me how can I do so.....
Solved!
Go to Solution.
Attachments:
COMPARISON.vi ‏8 KB

AnkitRamani wrote:
Thank you very mach for your help..
may be i have solved this ....i have made one change in my vi that instead of min. i select max and max. value is compare with the value of y and then if y is less then the max. while loop will be stop other wise its run continuously.
this is working fine...
any ways thanks again for your help and time...
I have to agree with Lewis - his way is more efficient.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Function to compare particular value with LOV Additional Description column

Hi,
Is there an existing function that compares a value with the "Additional Description" of a particular LOV ?
Can the comparison be done by "Adminstration - Personalization"?

Sorry & thanks sathish,
Now i got the result.
SQL> select DECISIONED_STAGE_ID,DECISIONED_STAGE_USER_ID from naap10_application where APP_DECISION_DATE BETWEEN TO_DATE ('31.01.2007 00:00:00', 'DD.MM.YYYY HH24:MI:SS') AND TO_DATE ('31.01.2007 23:59:59', 'DD.MM.YYYY HH24:MI:SS')
2 and application_id=2007010028552;
DECISIONED_STAGE_ID DECISIONED_STAG
2006060113 SYSTEM
================================
But one doubt,
When i created the column with the date datatype how it gets the time value,
And in one environment db i got the result but in another environment i dont get,
Shall i want to change any session status of date?

How to compare single value with multiple values

In my query I have something like this:
A.SOR_CD=B.SOR_CODE where A and B are 2 different tables. This condition is in the where clause. The column in table A has single values but some values in table B have multiple comma separated values (822, 869, 811, ..). I want to match this single
value on the left side with each of the comma separated values. Please let me know how will I be able to do it. The number of comma separated values on the right side may vary.

Hi MadRad123,
According to your description, you want to compare single value with multiple values in your query. Right?
In this scenario, the table B has comma separated values, however those comma separated values are concatenated into a string. So we can use charindex() function to return the index of the table A value. And use this index as condition in
your where clause. See the sample below:
CREATE TABLE #temp1(
ID nvarchar(50),
Name nvarchar(50))
INSERT INTO #temp1 VALUES
('1','A'),
('2','A'),
('3','A'),
('4','A'),
('5','A')
CREATE TABLE #temp2(
ID nvarchar(50),
Name nvarchar(50))
INSERT INTO #temp2 VALUES
('1','a,A'),
('2','A,B'),
('3','c'),
('4','A,C'),
('5','d')
select * from #temp1 a inner join #temp2 b on a.ID=b.ID
where CHARINDEX(a.Name,b.Name)>0
The result looks like below:
Reference:
CHARINDEX (Transact-SQL)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Comparing a value with NULL

Hi,
A funny thing is happening to me. Is it only in oracle 9i or in every version.
I am working on a state project on Data Warehousing and faced a small BUG. Here is the sample code.
DECLARE
v_Var varchar2(10) := 'a';
v_Null varchar2(10) := null;
BEGIN
     IF v_Var != v_Null THEN
          DBMS_OUTPUT.PUT_LINE('First: Not equal');
     ELSE
          DBMS_OUTPUT.PUT_LINE('First: Equal');
     END IF;
     IF v_Var = v_Null THEN
          DBMS_OUTPUT.PUT_LINE('Second: Equal');
     ELSE
          DBMS_OUTPUT.PUT_LINE('Second: Not equal');
     END IF;
END;
This anonymous block should return Not Equal for both the statements, but unfortunately it returns Equal for the First and Not equal for the Second.
Is this a BUG?
Is this happening only in version 9i (I use version 9.2.0.1.0)?
Any help/suggestion is appreciated.
Thanks! :)
Kamal Vala

Thanks Justin! :)
I got a clear answer from U.
Appreciated.
In this case I can go with the second statement as any way it returns Not equal
Here is the modified actual statement which I am using in my procedure and now it works.
I have modified the Inner IF by adding ELSE part, comparing with = (Earlier !=) and passing the variable assign to the ELSE part.
-- compare old values with new values after checking the NULL values for Approver.
IF (vc_Approver IS NULL) AND (v_Approver IS NULL) THEN
-- Not passing value to keep the same value for v_RecInsert as the value is not changed.
NULL;
ELSE
IF vc_Approver = v_Approver THEN
-- Not passing value to keep the same value for v_RecInsert as the value is not changed.
NULL;
ELSE
v_RecInsert := TRUE;
END IF;
END IF;
Here if v_RecInsert is TRUE then I have insert the record.
Hi Garcia,
I can't use NVL function here as I have to pass a value for NULL and If that value really comes in the field.....than it will problem again.
Thanks! to Justin and Garcia for taking ur time.
Kamal Vala :)

Compare current value with previous value

Hello,
I would like to compare the current value with the previous value of the current value.
How can I solve this problem?
Maurits

Hi,
after going through the basics course you surely can understand that example:
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Comparing database table with one value

hi,
i need to compare a value with table record.
how can i compare?
please help me.
Thank you

I guess your question doesn't fully present your
doubt.. JDBC is the obvious answer for accessing the
database and taking the result set.. Post back if
this is not what you wanted..It's too obvious and like many others the OP might not ever visit this thread.

How to compare dropdown pre value with post value in sharepoint designer list workflow

How to compare dropdown pre value with post value in sharepoint designer list workflow

Hi,
Can you provide more details about your requirement? It would make others easier to find a solution for you.
By default, a workflow will be triggered after submitting data in the NewForm or EditForm.
If you want to monitor the value changed in a drop down menu which is supposed to be in NewForm or EditForm, it would be more appropriate to apply custom JavaScript in the NewForm
or EditForm page.
About how to detect the value changed using JavaScript, the demos in this thread would be helpful:
http://stackoverflow.com/questions/12080098/dropdown-using-javascript-onchange
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How I can stop the combo box with list of values from fireing validations

Hi I'm using Jdeveloper 11.1.2.3.0
Using Hr Schema employees table
I Display employees data in af:table
and I make List Of values on Department_id filed to easy change the employee department
and another one on Job_id filed
and Imake them UI Hints as ( combo box with list of values ) in the employeesVO
the problem is when I Select a value from department or jobs ( combo box with list of values )
fires the entire filed validations for mandatory atributes
Note : the af:table Property ( contedelivery) is set to (immediate )
How I can stop the combo box with list of values from fireing validations

check it out.,
http://andrejusb.blogspot.in/2012/09/what-to-do-when-adf-editable-table.html

How to use List of values with bind variables on item?

Hi
I made a dynamic list of values with a bind variable as a provider. I tried to run the list, and it worked fine - i filled inn the bind variable when asked for, and i got a list of values to choose from.
I would very much like to use this list of values as an attribute on a custom made item. My wish is that when creating the item you someplace write the bind variable, and the list will then turn up as wanted. (I could f.ex add the variable as an attribute on the page type)
I tried to create a custom attribute and assign the list of values to it. It created an error when I then tried to add the attribute to the item.
Does anyone have any idea on how to solve this?
Any help appreciated!
Maja R. Anjer

Hi
i am getting error as
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (SELECT meaning, lookup_code,lookup_type
FROM fnd_lookup_values
WHERE view_application_id = 200) QRSLT WHERE (lookup_type=:1 AND ( UPPER(MEANING) like :2 AND (MEANING like :3 OR MEANING like :4 OR MEANING like :5 OR MEANING like :6)))
Thanks
Mateti

Create a new column in a table that compares the value of one column with its previous value

The DDL:
DECLARE
@T TABLE
IDNO
int,
name
varchar(40),
[Date]
datetime2,
Price1
float,
Price2
float
DECLARE
@K TABLE
IDNO
int,
name
varchar(40),
[Date]
datetime2,
Price1
float,
Price2
float
INSERT
INTO @T
VALUES(22,'C_V_Harris','2014-01-02 10:23:49.0000000',
23.335,
23.347)
INSERT
INTO @T
VALUES(21,'C_V_Harris','2014-01-02 10:05:13.0000000',
23.357,
23.369)
INSERT
INTO @T
VALUES(20,'C_V_Harris','2014-01-02 09:56:15.0000000',
23.364,
23.377)
INSERT
INTO @T
VALUES(19,'C_V_Harris','2014-01-02 09:45:26.0000000',
23.351,
23.367)
INSERT
INTO @T
VALUES(18,'C_V_Harris','2014-01-02 09:43:20.0000000',
23.380,
23.396)
INSERT
INTO @T
VALUES(17,'C_V_Harris','2014-01-02 09:34:28.0000000',
23.455,
23.468)
INSERT
INTO @T
VALUES(16,'C_V_Harris','2014-01-02 09:30:37.0000000',
23.474,
23.486)
INSERT
INTO @T
VALUES(15,'C_V_Harris','2014-01-02 09:18:12.0000000',
23.419,
23.431)
INSERT
INTO @T
VALUES(14,'C_V_Harris','2014-01-02 09:16:06.0000000',
23.360,
23.374)
INSERT
INTO @K
SELECT
ROW_NUMBER()
OVER (ORDER
by IDNO)
AS RN,*
FROM
@T
SELECT
* FROM
@K
--not working:
SELECT
a.RN,a.Price2
FROM
@K a
INNER
JOIN @K
b
ON
a.RN=b.RN-1
WHERE
a.Price2>b.Price2
I need to create a view with a column (say 'Comp' below) that compares the value of each row in Price2 with the previous Price2 row, and it is greater then +1, the
same 0, and less -1.
The processed table should be:
IDNO
name
Date
Price1
Price2
Comp
22
C_V_Harris
1/2/2014 10:23:49
23.335
23.347
0
21
C_V_Harris
1/2/2014 10:05:13
23.357
23.369
1
20
C_V_Harris
1/2/2014 9:56:15
23.364
23.377
1
19
C_V_Harris
1/2/2014 9:45:26
23.351
23.367
-1
18
C_V_Harris
1/2/2014 9:43:20
23.38
23.396
1
17
C_V_Harris
1/2/2014 9:34:28
23.455
23.468
1
16
C_V_Harris
1/2/2014 9:30:37
23.474
23.486
1
15
C_V_Harris
1/2/2014 9:18:12
23.419
23.431
-1
14
C_V_Harris
1/2/2014 9:16:06
23.36
23.374
-1
How can I structure the statement to get (the most recent - order by date ) result for Comp?

Satheesh Variath, I just had to make some corrections from your script to get the correct answer:
CREATE
VIEW vw_Comp
AS
SELECT
TOP 1 t.IDNO,t.name,t.[Date],t.Price1,t.Price2,
CASE
WHEN t.Price2
> LAG(Price2,1)
OVER (PARTITION
BY name
ORDER BY IDNO)
THEN 1
WHEN t.Price2
< LAG(Price2,1)
OVER (PARTITION
BY name
ORDER BY IDNo)
THEN -1
ELSE 0
END
AS Comp
FROM
@T t
ORDER
BY DATE
DESC
The adjustments: the selection of the most recent comparison (Top 1) and the use of the function LAG (instead of LEAD) to get the previous value of the column.

How to compare the values stored in the list

Hi,
I am having the requirement that i want to compare the values stored in the list.How to store the values in the list and compare the list values stored inside it.
Regards,
Ahamad

http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#sort(java.util.List)
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#sort(java.util.List,%20java.util.Comparator)
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Comparator.html
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Comparable.html

Comparing the current value with the previous one in Powershell

Hi,
New to scripting and i was wondering how can I compare the current value with the previous value?
I am having trouble with the loop structure, and I am not sure I am on the right track...
I am trying to compare the record to next record in the same csv file after import-csv... My code runs fine, but is not giving the right result.
$FilePath = Get-FileName -initialDirectory "C:\"
#Testing for null
If($FilePath)
$Data = Import-csv -Path $FilePath | Sort-Object BUYER, {[int] $_.PO_NBR}, {[int] $_.LINE_NBR}
Foreach($fData in $Data)
$i = $fData
Foreach($i in $fData)
if($fData.Buyer -eq $i.Buyer)
#save all the same buyer name to a new variable
Write-Host "Same as previous"
Else
Write-Host "Variable is null"
Remove-Item function:\Get-FileName

Thank you. The Foreach loop is now working properly.
Can I ask what is the purpose of "-ea 0" in the import-csv? I can't seem to find "-ea" as a parameter for import-csv in help.
-ea is short for -ErrorAction.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Creating a property with list values derived from other hierarchy

Hello Friends,
Thanks in advance for any help in this regard.
1)     Can we have a property with list values populated automatically from other hierarchy.
2)     Can we select multiple items from the list box. Does property allows multiple values.
The example is like this. There are 2 hierarchies.
Customer
     Customer 1
     Child Customer
Industry
     Hightech
     Computers
     TVs
Manufacturing
     Auto
     Steel
     Healthcare
     Pharma
     HealthInsurance
The requirement is to add Industry hierarchy as property of Customer Hierarchy and select each customer is what type of Industry they belong as a property value.
Thanks

Use property data type ListGroup for multiselect.
To select values from another hierarchy you can use Node or MultiNode, or an Asscociated Node property, of which there are several types. I'm not fond of the property editors for Node data types and will often just use a string and validate the user input by defaultin prefixes and such with a derived property that is checked by a query based validation. Make sense?

How to implement list of values with bind parameters

Hi All,
Please give me details about how to implement list of values with bind parameters.
I have implemented with below things.
1) created lov view object with query like select meaning, lookup_code from fnd_lookup_values where lookup_type=:1;
2) The above vo added to applicationa module.
3) created Controller class in the co class written code in processRequest();
String vLookupType=pageContext.getParameter("LookupType");
Serializable params={vLookupType};
am.invokemethod("Initialize",params);
4) In AM Impl Class invoke the VO
5) In VO Impl class executed the query..
But the above process working fine but when i give the value in lov text field like 'C' then press tab button the result will not showing instead of that i am getting error message, i want to implement standard lov functionality while implementing query with bind parameter.
any thing reqired to add the code to controller for search criteria..
Thanks
Mateti

Hi
i am getting error as
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (SELECT meaning, lookup_code,lookup_type
FROM fnd_lookup_values
WHERE view_application_id = 200) QRSLT WHERE (lookup_type=:1 AND ( UPPER(MEANING) like :2 AND (MEANING like :3 OR MEANING like :4 OR MEANING like :5 OR MEANING like :6)))
Thanks
Mateti

Compare a value with list

Similar Messages

Maybe you are looking for