Compare repositories

I am looking for a method to compare / synchronize repositories in order to be sure that repositories in different stages (test, acceptance, production) are the same. Historically there have been too many changes. Mainly the difference between the Acceptance repository in comparision to the one in Production is an issue because we do not want to replace it blindly.

That could be a way to go but it takes too much time and effort. I would have to deploy both repositories first and then do a compare. Another way would be to query the repositories directly but I would not know where to start let alone the meaning of the tables in the repository.

Similar Messages

How to compare 2 different repositories in Designer 2000?

How to compare 2 different repositories in Designer 2000?
Is it possible to compare repositories?
If yes, how can i do that? Is there a tool for this?
Situation:
I've 2 different designer repositories. I've compared in the database schema DES2_MANAGER the table SDD_ELEMENTS with the second database.
I've compared the modules, where the last_update_date was different.
Result was 10 screens. So now i want to compare these modules(SCREEN) in designer with an other designer Repositorie.
Thanks anyway

If yo will click on the name/title of the document (there'll be a small arrow on the right of it), you will get this menu:
You can choose to browse all versions....

How to compare OID repositories

Greetings,
I have just installed and configured OID 12g. I have two servers each hosting a repository with peer to peer replication in place. I have manually verified that changes to the repository are being propagated. Now I am looking for a means whereby I can easily compare the contents of each repository to verify that there are in fact no differences. I have looked at LDAPCOMPARE but that does not appear to be the answer and I am unable to find an LDAPDIFF command. The LDAPSEARCH command does not appear to have an option to compare the contents of two repositories either.
Is there a means whereby I can do this? If so can someone point me at the appropriate documentation please.
Thank you.
Bill Wagman

Hi Gary,
I had a similar desire to compare environments (3 here, development-acceptance-production), unfortunately DB-links were not allowed between the different environments.
My hands-on but not very professional solution was to write a relatively simple query on the repository, run that for all 3 environments, and paste the result in Excel, nicely aligned so comparison was relatively easy.
For detailed comparison I would export the object (i.e. create mdl-file) on all environments and then use some comparison tool the check it on line level.
I guess one could do something similar using OMBPlus, but I don't see many options combining the lot when the environments are separate...
There are probably more people around interested in any proper solution, I'll 'anxiously' await any more constructive approach than what I've been fiddling with so far.

Advantages of BW Query in SAP Portal when compared to WEB BEx Analyzer

Hi
What are the advantages of having a BW Query in SAP Portal when compared to WEB BEx Analyzer
I had to presention to higher managers of having a SAPPortal for BW report that WEB BEx Analyzer
can any one please update me with few points (10-20) that will be useful for my presentation
screen to geethikakrishna->gmail
Thanks in advance

Hi Krishna ,
I think you should highlight the portal role in presentation
Now a days all organizations using sap portal as their user interface. We can login portal once and we can get all the information from bw,crm...sap systems and non sap systems.
so no need to login each and every system individually.
The portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
For all information on portals refer to help.sap.com->documentation->netweaver->Netweaver2004->English
IN people integration you will find information on portals
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm
check below threads for some information
easiest way to publish
Easiest way to post existing BW queries onto portal
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9d/24ff4009b8f223e10000000a155106/frameset.htm
Execution of BW Reports Through Enterprise Portal
Best Practices for BI Report publishing on Portal - BI 7
Use of BI's Enterprise Portal
The web application designer offers rich functionality for creating dashboards. In SAP NetWeaver BI 2004s (aka 7.0), when you publish a template it is automatically created as an iView for the portal.
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 1
Koti Reddy

Improvement Suggestion: Add Animation to Movie Clips in Repositories

Hi there,
I have been trying to post this improvement suggestion by filling-in the corresponding form but it didn't allow me enough characters to describe it correctly. So I am posting it here now and going to reference it in the Improvement Suggestion form...
Currently it's hard to perform a good edit because Adobe Premiere Pro doesn't provide a clip basket showing all available clips running, allowing the user to preview and choose from different takes of the same scene.
I'd like to suggest to animate all movie clips in all repositories, like Media Browser and Project panels, in order to create kind of an animated lightbox.
These clips should be run without audio, in low resolution and, optionally, at a lower framerate, depending on the machine's capabilities and user's preferences.
Clicking (and thereby activating) one of those movie clips should ...
magnify that clip,
enable audio for that clip,
display a timeline,
and display an in-point and an out-point marker.
Using these markers, the user shall be able to limit the preview loop of the clip in that particular repository (e.g. to repetitively monitor only a small scene of the movie clip).
Here's a link to a small movie clip demonstrating the improvement suggestion as a virtual live demonstration:
(While recording I was suffering from a tonsillitis, so the text might be hard to understand from time to time.)

After carrying this thought with me around for a while I'd like to add an update to my original suggestion:
When comparing different takes (= clips) of the same recorded live scenes, the usual editing process while working with Premiere Pro would be to drill down on the take that's supposed to be inserted into the sequence. So if there were 8 takes of the same scene, first there would be 8 clips to compare, then 7, 6, 5, 4... until the final clip is found.
In the course of the comparison process it would be very helpful to be able to "switch off" those takes that have been decided not to be used. So I'd like to update my suggestion to provide the following additional features:
Each preview clip should provide a play/pause feature. So playback shall be switched on and off individually for each of the preview clips.
As mentioned in my original suggestion, when activated (zoomed), the preview should provide buttons for manipulating that clip preview's playback. Originally I suggested a Play Audio button (with a speaker symbol).
I now, additionally, suggest to add a Play/Pause button to an activated (zoomed) clip preview. If playback is active, that button should display a Pause icon. If playback is paused, the same button should display a Play icon.
Given that, an active preview would be displayed something like this:
After a clip has been selected for an insert, the next editing step would be to search a clip from the repository for the next insertion into the sequence. So all tracks would be back in the game.
So there should be a new menu item, resuming playback of all preview clips in the repository: "Edit > Preview > Play all clips".
If the user wants to concentrate on the Program Montitor video, he/she should be able to pause all preview clips. So I suggest the should be a new menu item complementing the previous one: "Edit > Preview > Pause all clips".
Some people might prefer not to see any animation in the repositories at all. For them there should be a new option available in Premiere Preferences to pause all preview clips by default (this setting would equal to the current behaviour).
The user might want to concentrate on a single preview clip and just want to have this single clip being played back when activated (zoomed).
So I suggest there should also be a Solo option available.
By holding the [CTRL] key down while clicking the Play/Pause button suggested in provision #1, all preview clips should be paused and the currently active (zoomed) preview clip should be played back alone.
In my suggestion I have been focussing on using Premiere Pro with the mouse. But there should be keyboard shortcuts available for all these actions, too.

Compare WebCenterContent (UCM) and WebCenterContent: records(URM)

Hi Experts,
We are planning to implement a Records management application.
We would like to understands the following:
benefits of using URM with UCM and leveraging the URM Content adapter to manage content in UCM vs storing content in URM directtly
Is there a document with describes/compares the feature set of these two products. Which feature available in UCM will not be available in URM?Like DIS, sitestudio, using IBR
Please clarify and provide with any reference document that I can use.
Thanks,
Manjunath

Since 11g a "URM-only" server is the same as a "UCM" server, so it will have all its features. The question is, however, whether it make sense to use them.
Benefits of using URM and UCM with the URM Content adapter are mainly "federated records policy" - the URM can serve as a master server for several repositories (UCMs, but also filesystem, or 3rd party repositories such as MS SharePoint or EMC Documentum). If you don't need that, you should probably opt for UCM with URM configured (make sure you have WebCenter Content, and not just WebCenter Content: UCM license!), unless you have some reasons (e.g. performance) for doing otherwise.

ABSChecker:Check if ABS has newer version available than repositories

Because I have plenty of time to possibly reinvent things I have created a little piece of python script that compares packages in current pacman repositories against PKGBUILDs in local ABS database and reports (in theory) all out-of-date packages / packages with lesser version number than their ABS PKGBUILDs.
It was greated for PlugBox project (Arch Linux for plug computers) and I though I could share it with you all and change knowledge! I was about to jump of a roof when I noticed that some PKGBUILDs are used to create several packages at once. Oh the horror. In those cases the script dies horribly... in possible functionality.
I don't know if this is the right forums section, but admins always do their job well in these matters!
http://www.ihku.biz/abschecker/
Laugh at me! It is your great change to provide a link to a similar utility done better!
Have fun!

wehowardjr wrote:
Go to http://www.linksys.com Below the Linksys logo on the upper left of the page should show your location, like United States. Click on the [ Change ] link and pick United Kingdom. Dont click on the Remember this choice box.
Then go to Support / Downloads. Find WRT54GL v1.0 in the dropdown list. Then click on the "Downloads for this product" button. Click on the Firmware link and the rest is obvious. There you will find 4.30.7 and you should be good to go.
Message Edited by wehowardjr on 12-09-200606:50 AM
But someone above said the UK and US versions have different firmwares.
Can anyone confirm if the UK firmware can be used on a US router?
I am also hesitate to upgrade to a third-party firmware before I am sure I can revert back to the stock firmware.

Get the values from a table comparing fields of different data types

Hi Experts,
I want to fetch AFVC-AUFPL and AFVC- APLZL by passing WBS element from a ztable.
select aufpl aplzl
from afvc
into TABLE gt_afvc
FOR ALL ENTRIES IN gt_boq
where projn = gt_boq-posid.
AFVC-PROJN - NUMC 8 (WBC ELEMENT)
ZTABLE-POSID - CHAR24 (WBC ELEMENT)
How to get aufpl and aplzl by comparing those 2?
Regards
Mani

WBS element does have an conversion routine at the domain level. So sometimes you work with one format (8 digits) and sometimes with 24 digits.
You use FMs
CONVERSION_EXIT_ABPSP_INPUT
CONVERSION_EXIT_ABPSP_OUTPUT
to convert between values. Do your conversion before your select and do not forget to use a large enough data element for the field, which gets the 24-digits long value of the field.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

How to compare delivery date in schedule lines and PGI in outbound delivery

Hi,
I want to create a report to monitor and compare different dates in sales and delivery process.
One of my key figure is the comparison between date confirmed to the customer, that I can find in the schedule line of the sales order, and the actual goods issue date from the outbound delivery.
But I can't succeed in making the link between delivery and schedule lines, means between LIKP and VBEP.
Would you have any idea?
Thank you.

It seems there's no exact (table) connection / link between delivery item and schedule line item.
Those who were searching for this thing (link / connection between delivery item and schedule line) were recommended to use FM "RV_SCHEDULE_CHECK_DELIVERIES".
This FM calculates the delivered quantity for each schedule line, so it makes link between the delivery item and schedule lines - however if you check the code it's quite sophisticated...
(if you put a breakpoint in the FM and display a SO in VA03, you can check how the parameters have to be populated with data).
Schedule Line and Delivery Link
Edited by: Csaba Szommer on Aug 5, 2011 12:03 AM

What is new in ECC 5.0 compared to R/3 4.7 version

Hi
what is new in ECC 5.0 compared to R/3 4.7 version
Thanks in Advance
Deepa

Hi
see these links
Refer this link for ECC 5.0 & 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Reward points if useful
Regards
Anji

SSRS Matrix report. Variance expression by Month. Need to compare month from prior year to current month of current year VS2010

Please help. I have a matrix report. In the report I have row group PO Type. One the Column groups I have a parent group by Fiscal Year, and then a child group by Month. When I run the report, I get two years of data back broken
out by month. Please see below.
Now here is where I am getting stuck. I need to take the variance between the current month of the current year, from the same month of the prior year. So I need to show the difference between Oct , 2014 from Oct, 2013. November, 2014 from November
2013... etc. etc.
In the example below, how do I create a column or row showing the variance for Contracts for October 2014. I need to take the contracts for October 2014 which is 3 and subtract that from October 2013 which is 8. Any suggestions? How do I do that
for each month? Then I need to do it for the quarter... then the year? But I'll be happy if I can just get the month working first.
Any help will be appreciated.
here is what my rdl file looks like.
Here is what my report looks like when I render it.

Hi Adrian_s2012,
According to your description, you want to compare values for the month of current year with the month of prior year and get the variance. Right?
In Reporting Services, we don't have any function to get this "Year to Year" Growth. In this scenario, if you data source is a cube, we suggest you use Analysis Services to achieve your requirement. If this data source is just from database, it will be hardly
to calculate the variance because we need to compare the values within every two different column group and matrix generate adjacent columns one by one. Even we make it by using custom, every time executing the long code when generating result
in a cell will reduce a lot of performance, we really don't suggest to do that in SSRS. Here is a thread with much easier requirement, please take a reference of that:
http://social.msdn.microsoft.com/Forums/office/en-US/842e2dcb-d949-4297-9d91-eac989692cb5/difference-between-the-grouped-column?forum=sqlreportingservices
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Getting error in XMLP while compare a Tag value to partial value

Hi All,
We are working on 'AP Check Print Report' which is XML based Report and the output is in the PDF format.
We are facing a problem when we are suppose to compare a Tag value (DocumentNumber/ReferenceNumber) to a partial value('%TDS-CM%') as below,
<?if:DocumentNumber/ReferenceNumber NOT LIKE '%TDS-CM%'?>
Can someone help me, how to achieve it as well as whether it can be done or not.
Thanks in advance
Abhishek

Have a look at these threads:
Re: Using Wild Card % in the IF condition of RTF templates
Re: Syntax for IN / NOT IN Commands
Thanks!

Compare the input filename in the selection screen

In the selection screen input field
there is an option of selecting the directory and file name and not the extension .
This is used to download the datas
Extension can be selected by using the option button
rtf
csv.
the user has to give only the filename and not the extension.
suppose if the user input is C:\temp\file1.rtf.
Either i should take only the filename
or i should display the message give only the filename and not the extension . its already been selected!!!!
I want to compare the input string contains .doc
how to do the comparison and to get the above results mentiond
Thanks in advance

Because the requirment is there are two option buttion for selecting the download file format
But unknowingly if the user gives the filename along with the extension. I need to handle that error
giving some error message or information message
By comparing the last 4 letters of the filename.. either.doc or rtf or csv or watever
so how to do that
then after comparing that i should give the user a msg doc type is already selected give only the filename
I hope u understand my req

Query - Compare Goods receipt to AP Invoice

Can anyone help wiht a query comparing the total of a goods receipt (doctotal) and the total of the AP Invoice it is linked to.
Display GR docnum, GR docdate, GR doctotal, AP docunum and AP doctotal

You may check this one first:
SELECT DISTINCT T1.DOCNUM GRPO#, T1.DOCDATE 'GR Date', T1.DocTotalSy, T3.DOCNUM Invoice#, T3.DocTotalSy
FROM PDN1 T0
INNER JOIN OPDN T1 ON T1.DOCENTRY = T0.DOCENTRY
LEFT JOIN PCH1 T2 ON T2.BASEENTRY = T0.DOCENTRY
LEFT JOIN OPCH T3 ON T2.DOCENTRY = T3.DOCENTRY
WHERE T3.DOCNUM like '[%0\]%'
Happy New Year!
Gordon

Compare repositories

Similar Messages

Maybe you are looking for