Comparing EP 6.0 and EP 7.0
hi,
We were having EP 6.0 and now we have upgraded to EP 7.0.
Need to know what are all the new features /advantages that are available in EP 7.0 when compared to EP6.0.
Thanks and regards,
Kris
Gopi,
Check these links to start off. Do a search on SDN and you will find lots of thread on this topic.
[Differences between EP 6.0 and 7.0|http://sapprofessionals.org/node/813]
The specified item was not found.
Chintan
Similar Messages
-
How to Compare 2 CSV file and store the result to 3rd csv file using PowerShell script?
I want to do the below task using powershell script only.
I have 2 csv files and I want to compare those two files and I want to store the comparision result to 3rd csv file. Please look at the follwingsnap:
This image is csv file only.
Could you please any one help me.
Thanks in advance.
By
A Path finder
JoSwa
If a post answers your question, please click "Mark As Answer" on that post and "Mark as Helpful"
Best Online JournalNot certain this is what you're after, but this :
#import the contents of both csv files
$dbexcel=import-csv c:\dbexcel.csv
$liveexcel=import-csv C:\liveexcel.csv
#prepare the output csv and create the headers
$outputexcel="c:\outputexcel.csv"
$outputline="Name,Connection Status,Version,DbExcel,LiveExcel"
$outputline | out-file $outputexcel
#Loop through each record based on the number of records (assuming equal number in both files)
for ($i=0; $i -le $dbexcel.Length-1;$i++)
# Assign the yes / null values to equal the word equivalent
if ($dbexcel.isavail[$i] -eq "yes") {$dbavail="Available"} else {$dbavail="Unavailable"}
if ($liveexcel.isavail[$i] -eq "yes") {$liveavail="Available"} else {$liveavail="Unavailable"}
#create the live of csv content from the two input csv files
$outputline=$dbexcel.name[$i] + "," + $liveexcel.'connection status'[$i] + "," + $dbexcel.version[$i] + "," + $dbavail + "," + $liveavail
#output that line to the csv file
$outputline | out-file $outputexcel -Append
should do what you're looking for, or give you enough to edit it to your exact need.
I've assumed that the dbexcel.csv and liveexcel.csv files live in the root of c:\ for this, that they include the header information, and that the outputexcel.csv file will be saved to the same place (including headers). -
Comparing columns in table and triggers
hi masters,
i have oracle 10g in Linux and us PL/SQL developer to access database, ia m not a developer, but am assigned task to compare columns in table and associated trigger.
let me explain, we have 800 tables, and each table essentially have a trigger created on it. the condition is that each trigger on table should include each column in table, that is columns in table and trigger should be same.
now i don't understand how to compare them, rather can you suggest any query for the same?? and comparing 800 tables manually will be tedious job...
i am unable to compare trigger columns with that of tables..
how can we achieve this???
any suggestions??
thanks and regards
VDHi,
A good starting point could be consult user_triggers view. Example:
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
Connected as hr
SQL> desc user_triggers
Name Type Nullable Default Comments
TRIGGER_NAME VARCHAR2(30) Y Name of the trigger
TRIGGER_TYPE VARCHAR2(16) Y Type of the trigger (when it fires) - BEFORE/AFTER and STATEMENT/ROW
TRIGGERING_EVENT VARCHAR2(227) Y Statement that will fire the trigger - INSERT, UPDATE and/or DELETE
TABLE_OWNER VARCHAR2(30) Y Owner of the table that this trigger is associated with
BASE_OBJECT_TYPE VARCHAR2(16) Y
TABLE_NAME VARCHAR2(30) Y Name of the table that this trigger is associated with
COLUMN_NAME VARCHAR2(4000) Y The name of the column on which the trigger is defined over
REFERENCING_NAMES VARCHAR2(128) Y Names used for referencing to OLD, NEW and PARENT values within the trigger
WHEN_CLAUSE VARCHAR2(4000) Y WHEN clause must evaluate to true in order for triggering body to execute
STATUS VARCHAR2(8) Y If DISABLED then trigger will not fire
DESCRIPTION VARCHAR2(4000) Y Trigger description, useful for re-creating trigger creation statement
ACTION_TYPE VARCHAR2(11) Y
TRIGGER_BODY LONG Y Action taken by this trigger when it fires
SQL> select * from user_triggers;
TRIGGER_NAME TRIGGER_TYPE TRIGGERING_EVENT TABLE_OWNER BASE_OBJECT_TYPE TABLE_NAME COLUMN_NAME REFERENCING_NAMES WHEN_CLAUSE STATUS DESCRIPTION ACTION_TYPE TRIGGER_BODY
TRGTEST BEFORE STATEMENT INSERT HR TABLE DEPARTMENTS REFERENCING NEW AS NEW OLD AS OLD ENABLED trgTest PL/SQL DECLARE
before insert on departments -- local variables here
BEGIN
nul;
END trgTest;
UPDATE_JOB_HISTORY AFTER EACH ROW UPDATE HR TABLE EMPLOYEES REFERENCING NEW AS NEW OLD AS OLD ENABLED update_job_history PL/SQL BEGIN
AFTER UPDATE OF job_id, department_id ON employees add_job_history(:old.employee_id, :old.hire_date, sysdate,
FOR EACH ROW
SECURE_EMPLOYEES BEFORE STATEMENT INSERT OR UPDATE OR DELETE HR TABLE EMPLOYEES REFERENCING NEW AS NEW OLD AS OLD ENABLED secure_employees PL/SQL BEGIN
BEFORE INSERT OR UPDATE OR DELETE ON employees secure_dml;
END secure_employees;
RK_ALT_BEF_TRG AFTER EVENT ALTER HR SCHEMA REFERENCING NEW AS NEW OLD AS OLD ENABLED rk_alt_bef_trg PL/SQL BEGIN
AFTER ALTER ON HR.SCHEMA dbms_output.put_line('AFTER Schema trigger fired');
dbms_output.
SQL> Regards, -
How can i compare in percentage, vowels and consonants in english and german language?
how can i compare in percentage, vowels and consonants in english and german language?
Hi,
Try comparing the Unicode value of the characters, see the code samples in these threads:
Generating unicode
for arabic character similar to Character map in c#
How
do you get the numeric unicode value of a character?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Compare two .txt files and show result
HI
Could anybody show me how to compare two text files and show the result.
i.e.
textfile1.txt
harry.denmark
karry.sweden
textfile2.txt
harry.denmark
karry.sweden
marry.usa
Compare
result=
marry.usa
The text files I want to compare are how ever much larger than this example. (up to 2-3.000 words)
anybody ??
Sincerly
PederHI & thanks for reply
I know almost nothing about java so could you or anybody please show me the code to do this? Or is it perhaps too large or difficult a code?
I know how to compile a .java file and run it in prompt :-) and thats about it (almost)
I offcourse understand if its too much to ask for :-) -
Comparing two cells together and highlighting duplicates
Hello
I have two lists of emails that are of different length. I'd like to compare these two lists and highlight any duplicates, so that I don't send any email twice to the same person.
How is this done in Numbers'09?
Thanks!jknuutila wrote:
Never mind, I got Yvan's formula to work now, thanks both for your help!
JK,
Yvan's formula and mine are functionally equivalent, but assume different table names. (Yvan posted before I finished composing my answer and I opted to let mine stand when I noticed.) Of course you must always take care to either make your table names match the equation or make the equation match your table names. And of course, the proper parameter separators must be used.
We can often avoid problems with parameter separators in our examples, and we can be careful to use simple, plain English, if we suspect that you are in a location where the semicolon replaces the comma as a separator, and where English may not be the first language. This requires that you edit your Profile Data to show your country/location. The more we know about you, the easier this becomes.
Best regards,
Jerry -
Help needed to compare two Key Figures and show out put
hello experts,
I am comparing the Sales data for two year/month. I need to compare these two KF and show the result only if one is greater than the other by 40%. Sample
Jan/2008 Jan /2007
400 600
500 300
300 700
600 400
The columns should be outputted only if Jan 2008 is greater than Jan 2007 by 40% for all customers in a business area. Thank you all in advance.
Regards,
-AkashHi Akash,
Your requirement could be met by
Creating a Calculated Key Figure say variance = ( ( Jan2008 - Jan2007 ) / Jan 2008 ) *100
Then create a new Condition on Variance so as to display rows only when Variance > 40
Hope this solves ur issue.Do revert
Vasavi -
To compare two internal tables and delete records
Hi friends,
I have to compare two internal tables and should delete the records which is not present in both the tables. Reply me as soon as possible.
Thanks.Hi Nagarajan,
1. I don't think there is any direct (one-shot statement)
way to achieve this.
one has to do by writing some logic.
2. Loop at ITAB1.
Read table ITAB2 with key Field1 = ITAB1-Field1.
If sy-subrc <> 0.
delete ITAB1.
endif.
Endloop.
Do the same again with ITAB2.
Loop at ITAB2.
Read table ITAB1 with key Field1 = ITAB2-Field1.
If sy-subrc <> 0.
delete ITAB2.
endif.
Endloop.
3. If any better way is found, i will let u know.
Hope it helps.
Regards,
Amit M. -
Compare Solaris based processor and Intel processor for EBS
We are planning to migrate our 9i database and Application(11.5.10.2) from Solaris to Linux.
Also planning for some major hardware changes.
We want to compare sparc V9 processors and Intel Processor.
Please let us know any documentation which compares both processors
- Bench marck for Solaris and Inter processors
- Any calculation like 1 Inter processor = n Solaris based processor
- Any other related topics .
Thanks
TTHi,
Please see the links referenced in the following threads.
Hardware for Oracle E-Biz R12(12.0.4)
Hardware for Oracle E-Biz R12(12.0.4)
Hardware requirements for Oracle APPS
Hardware requirements for Oracle APPS
Question Regarding R12
http://forums.tangosol.com/forums/thread.jspa?threadID=861380
Sizing..
Re: Sizing..
Regards,
Hussein -
I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No problem tones, watching videos. This problem or is it something normal?
I have this problem too, but it is intermittent. Sometimes the lock/unlock volume will drop to barely-audible, even though in settings the volume slider hasn't changed. If I then move the volume slider, it fixes the problem and the lock sounds jump back to normal, but then later on the problem will happen again.
-
Comparing load times w/ and w/o BIA
We are looking at the pros/cons of BIA for implementation. Does anyone have data to show a comparison between loads, loads with compression, vs BIA Index time?
Haven't seen numbers comparing load times. Loads to your cubes and compression continue whether you have BIA or not. Rollup time would be eliminated as you would no longer have the need to have aggregates. No aggregates should also reduce Change Run time, perhaps a lot, or only a little, depending on whether you have large aggregates with Nav Attrs in them. All of that is offset to some degree by the time to update the BIA.
Make sure you understand all the licensing costs, not just SAP's, but the hardware vendors per blade licensing costs. Talked to someone just the other day that was not expecting a per blade licensing, list price of the license per blade was $75,000 -
How to compare sale order bom and production order bom.
i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.
Hi,
Check Tcode:CS14 to SD/PP BOM's
Chidambaram -
NI Report Toolkit VI's changed or missing in 8.5 compared to 8.2 and earlier
I am trying to open an application I built in 8.2 in 8.5. At this point I have managed to get all the toolkits installed to the right directories I think, but the NI Report Toolkit is very different with the 8.5 installation than it was in the earlier versions I have used. I cannot load any of the report generation vi's I wrote in 8.2, because the new NIReport.llb does not contain many of the old vi's that my code is calling.
So far I have found these inconsistencies:
Append Image to Report (path).vi theoretically has been changed to just Append Image to Report.vi. I re-targeted to this vi but I haven't been able to fully load yet so I don't know if this is going to break wires.
RGT Does File Exists.vi is part of the older NIReport.llb but no longer exists in the new NIReport.llb.
The new NIReport.llb is much smaller than the old NIReport.llb, 2.3MB compared to 2.8MB. So a lot has apparently been removed.
What should I do to open all my old code with the new toolkit? Or should I just throw out the new toolkit and continue to use the old one?
Message Edited by billings11 on 11-15-2007 08:23 AM
-Devin
I got 99 problems but 8.6 ain't one.Nevermond. honestly I don't know why but somehow on every computer NIreport.llb is different. I don't know what is going on. I think since I have to mass compile every time I want to build an exe it is re-saving every called file in NIReport.llb. I think it saved additional instances of polymorphic vi's in there by name, and I don't know where that RGB vi came from. This is one reason why mass compiling every time I do a build is not a good workaround.
-Devin
I got 99 problems but 8.6 ain't one. -
Compare creation of Datasources and JMS Queues : SAP vs (Weblogic/Websphere
I am used to creating JDBC Datasources and JMS Queues on Weblogic/Websphere thru their Admin applications.
Can someone compare/contrast that process to that on SAP's netweaver ( either using NWA or Visual Administrator).
ThanksHi Parag,
For the process of creating JDBC datasources and JMS resources @ SAP NetWeaver you can refer to the documents here on SDN and help.sap.com, and compare that process for yourself, thus not being influenced by others' biased or unbiased opinions.
For NetWeaver 04 and 04s these would be:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm">JDBC Connector Service</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/cf4e71c46cdb4da31153be96c5389f/frameset.htm">JMS Connector Service</a>
For the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/javaee5">Java EE 5 Edition</a>:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7bb9751d-0e01-0010-febd-c3adce2c408c">Working with Database Tables, DataSources and JMS Resources</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a> -> section "Application Resources Management" (pages 89-104)
Hope that helps!
Your feedback/findings are very welcome!
-Vladimir -
Hi Guys
I have two csv files with the following headers and I need to import both files into the script to check whether the StaffCode is present in the Creation/Renewal of Contract csv in a DisableAccount Script so I can stop any action to disable the account as
the staff has renewed the contract with the company so the account should not be disabled.
However my accounts are still being disabled. I am not sure now to construct the query so that it detects that the account is to be left alone if the staffcode is present in both files
I does recognize that the $staffcodeN in the renewal file matches the $staffcode in the termination file
but still proceeds to disable or set an expiry date to the account anyway based on the termination file.
How do I stop it from doing that?
1)In the Creation/Renewal of contract file the following headers are present
- TranCode,StaffCode,LastName,FirstName,SocialSecurityNo,DateJoin,Grade,Dept,LastUpdateDate,EffectiveDate
2)In the Disable of contract file the following headers are present
- TranCode,StaffCode,LastName,FirstName,SocialSecurityno,LastDateWorked,Grade,Dept,LastUpdateDate,
My data is not very clean , I have a-lot of special characters such as = , ' ,/ and \ characters to remove first before i can compare the data
Thanks for the help in advance.
Yours Sincrely
Vicki
The following is a short snippet of the code
$opencsv = import-csv "D:\scripts\Termination.csv"
$opencsv2 = import-csv "D:\scripts\RenewContractandNewStaff.csv"
foreach ($usertoaction in $opencsv)
$Trancode = $usertoactionTranCode
$StaffCode = $usertoaction.StaffCode.replace("=","").replace('"','')
$LastName = [string]$usertoaction.LastName.Replace("/","\/").Replace(",","\,")
$FirstName = [string]$usertoaction.FirstName.Replace("/","\/").Replace(",","\,")
$socialsecurityno = $usertoaction.SocialSecurityNo.replace("=","").replace('"','')
$DateJoin = $usertoaction.DateJoin.replace("=","").replace('"','')
$LastDateWorked = $usertoaction.LastDateWorked.replace("=","").replace('"','')
$Grade = [string]$usertoaction.Grade
$Dept = [string]$usertoaction.Dept
$LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
$AccountExpiry = [datetime]::Now.ToString($LastDateWorked)
foreach ($usertoaction2 in $opencsv2)
$TrancodeN = $usertoaction2.TranCode
$StaffCodeN = $usertoaction2.StaffCode.replace("=","").replace('"','')
$socialsecurityNoN= $usertoaction2.SocialSecurityNo.replace("=","").replace('"','')
$DateJoinN = $usertoaction2.DateJoin.replace("=","").replace('"','')
$GradeN = [string]$usertoaction2.Grade
$DeptN = $usertoaction2.Dept
$LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
$EffectiveDate = $usertoaction.EffectiveDate.replace("=","").replace('"','')
$LastName2 = [string]$usertoaction2.LastName.Replace(",", "").Replace("/","").trim()
$FirstName2 = [string]$usertoaction2.FirstName.Replace("/","").trim()
# Use DirectorySearcher to find the DN of the user from the sAMAccountName.
$Domain = [System.DirectoryServices.ActiveDirectory.Domain]::GetCurrentDomain()
$Root = $Domain.GetDirectoryEntry()
$Searcher = [System.DirectoryServices.DirectorySearcher]$Root
$Searcher.Filter = "(sAMAccountName=$samaccountname)"
$doesuserexist1 = $Searcher.Findall()
if ($doesuserexist1 -eq $Null)
{Write-Host $samaccountname "account does not exist"}
elseif ($StaffCodeN -match $staffcode)
write-host "user has renewed the contract, no action taken"
else
if(($lastupdatedate -ne $null)-or($LastDateWorked -ne $null))
write-host "Setting Account Expiry to"$accountexpirydate
#$ChangeUser.AccountExpires = $accountexpirydate
#$Changeuser.setinfo()
if ($UserMailforwarding -ne $null)
#Set Account expiry date to Last Date Worked
# $ChangeUser.AccountExpires = $accountexpirydate
# $Changeuser.setinfo()
write-host "staff" $displayname "with staff employee no" $samaccountname "has
mailforwarding"
Write-host "Please disable the account manually via Active Directory Users & Computers and
Elseif ($accountexpirydate -lt $todaysdate)
#disable the accountHi Vicki,
This Forum has an insert-codeblock function. Using it will make your script far more readable
Your script is missing some parts, it is impossible to follow the problem.
You are performing the same string cleaning action on $opencsv2 for each element in $opencsv, when doing it once should suffice. Why not start it all by cleaning the values and storing the cleaned values in new arrays?
The Compare-Object function is great, why not take it out for a stroll on these lists, it might just safe you lots of unnecessarily complicated code ...
You are creating a new $Domain, $Root and $Searcher object each iteration, when doing it once should suffice. Probably not much of a time-saver, but every little thing contributes.
Try pinpointing the problem by doing extensive logging, not only by writing which action was taken, but writing the inidividual information (variables, mostly) before evaluation occurs. Your if/elseif/else looks sound, so if it's still not doing what you
want, the ingoing data must be different from what you think should be there.
Cheers,
Fred
There's no place like 127.0.0.1 -
Compare two Idoc's and send to te recievers as per the Condition.
Hi,
Scenario: Sender are a Idoc's and Receiver is Mail and File.
Sum the value of field1 of IDOC1 loop and compare with the field 2 of IDOC2. If the Condition satisfy send the data to file and mail reciever else send to only mail reciever.
I tried using a BPM. Steps used in BPM are as follow:
Step: 1
Fork -- with two branches.
Branch 1:loop1-- reciever1 -- container
Branch 2:reciever2
Step2:
Switch with two branches: Check the compare condition of the two Idoc
Branch 1:
Fork with two branches with send step with mail and file recievers
branch 2: Only mail reciever.
However if the condition is true or false the information is send mail to reciever.
I tried with the above steps, but failed.
Any changes required, please let me know.
Regards,
Manojsumit,
I recieve N number of IDOC1. I need Sum the value of field1 of IDOC1 loop and compare with the field 2 of IDOC2.
I tried using a BPM . Steps used in BPM are as follow:
Step: 1
Fork -- with two branches.
Branch 1:loop1-- reciever1 -- container
Branch 2:reciever2
Step2: Transfomation with Mapping program, source and Target message
Step3:
Switch with two branches: Check the compare condition of the two Idoc
Branch 1:
Fork with two branches with send step with mail and file recievers
branch 2: Only mail reciever.
When i checked with workflow i observe that that the message is not moving out of transformation step.But the message mapping is succesfully tested
Thanks,
Manoj
Maybe you are looking for
-
Crystal Reports Error, Developer Edition, XI R2
Post Author: squiggly12 CA Forum: Deployment I have a non embedded report sitting on a network server, and I have a program that when a menu link is clicked, it calls a .net dll which then popluates a .net 2.0 dataset, then crystal will load that tab
-
Where clause on one column out of two
I have a where clause filtering out data from the sum(workhour) column. I want to return another column beside it that does not filter workhour and a third column that filters workhour based on a different criteria. Is this possible? sql select activ
-
QuickVoice not sync very large file
I have a registered copy of QuickVoice installed on my iPad, running iOS 5.1.1 I also have a 300Mb conversation on it that i need to save on my PC. I'm tyring to use QuickVoice Sync, version 1.4.0.108 to import it, but no chance. It imports about 18
-
Hello Gurus, I need a small help from you regarding new portfolio creation. I am getting the following error message in Portal--> Portfolio Management --> Administration: 1. No Portfolios exist 2. Runtime error: Object type has not been instantiated
-
Using lasted Safari, it has locked up my mac, I can't close the application. It won't let me turn off the computer. If I do and turn it back on I am right back on the safari locked up screen. Any help would be appreciated.