Comparing Previous shared variable to current variable Whileprintingrecords

Hi All,
I have a report with items listed in the footer. I need to compare the shared variables of 1 record to the next but I can't use Previous(field) because I'm doing the comparisons in the footer. How can I use Shared variables to find duplicate values? In some kind of WhilePrintingRecords Array? If so, how do I limit the array to compare the present value to the previous value only?
footer row     SharedVariable
1                    887768
2                    887756
3                    887756
4                    887787
Thanks,
John

Hi John,
Create a formula with a code that looks something like this and place it in the footer section(by the way, which footer are you taking about?):
WhilePrintingRecords;
numbervar array arr;
numbervar x;
shared <variable_datatype> <variable_name>;
if Not(variable_name IN arr) then
     x := x + 1;
     redim preserve arr[x];
     arr[x] = variable_name;
Create another formula to display the contents of the array and place this on a footer section below the above one:
WhilePrintingRecords;
numbervar array arr;
stringvar vals;
numbervar i;
for i := 1 to ubound(arr) do
     vals := vals + arr[i] + chr(13);
left(vals,len(vals)-1);
Right-click this formula field once it's placed > Format field > Common tab > Check the 'Can Grow' option.
Hope this helps.
-Abhilash

Similar Messages

Compare previous with Current Value

Want to compare previous with current value and assign the right one..
COLA COLB
72 21356
41023 21356
90 78903
90 89078
90 78956
90 45632
41023 78903
41023 45632
Output I want is:
COLA COLB
72 21356
72 21356
90 78903
90 89078
90 78956
90 45632
90 78903
90 45632
Anytime the value in COLA is 41023, I need to look at value in COLB and compare it with the rest of values and assign the COLA value that is NOT 41023
Thanks...

Not sure but here a try :
SQL> select * from tbltbl;
      COLA       COLB
        72      21356
     41023      21356
        90      78903
        90      89078
        90      78956
        90      45632
     41023      78903
     41023      45632
8 rows selected.
SQL> MERGE INTO tbltbl a
2 USING (select c.cola,b.rowid rwd
3         from   tbltbl b,
4                tbltbl c
5         where b.cola=41023
6         and    b.colb=c.colb
7         and    c.cola!=41023) d
8 on    (a.rowid=d.rwd)
9 WHEN MATCHED THEN UPDATE set a.cola=d.cola;
3 rows merged.
SQL>
SQL> select * from tbltbl;
      COLA       COLB
        72      21356
        72      21356
        90      78903
        90      89078
        90      78956
        90      45632
        90      78903
        90      45632
8 rows selected.Works only if colb is unique for non 41023 value.
Nicolas.
Oh, very very late.
Edited by: N. Gasparotto on Oct 3, 2008 5:05 PM

The type of the value being assigned to variable ... differs from the current variable type

I am trying to load a variable on SSIS Execute SQL Task with a string value. I keep on getting an error message :-
“The type of the value being assigned to variable “User::LegacyColumns” differs from the current variable type”.
Below are the settings on my package:
Execute SQL Task Result Set –
Single Row
Variable Data Type –
String
The data to be loaded on the variable is a single row shown below:
FirstName,LastName,MiddleName,PatientType,Title
Can someone kindly help me to solve this as I’m lost for ideas.
Thanks,
Mpumelelo

Thank you Sorna. I think I have managed to solve it. After a long search I have found a solution which advises that I should use a Foreach Loop Container. The help is on this link:
https://social.msdn.microsoft.com/Forums/en-US/f46dea91-c26b-4ffe-ab1c-ebeef57c90b6/error-0xc001f009-at-mypackage-the-type-of-the-value-being-assigned-to-variable?forum=sqlintegrationservices
Mpumelelo

YTD and and previous year to date as variables

HI All,
If your cube doesn't have YTD and and previous year to date as variables to use - can these be created?
Regards J

Hi,
Yes it can be staged in cube but you need to write routine and transformation/update rule level.
If you need for some query requirement then you may achieve the same at query level. For this you need to create some Restricted Key figures by restricting your key figure with Calyear/month as per your need.
Query level approcah will be much easier then the cube level.
I hope it will help.
Thanks,
S

The type of the value (DBNull) being assigned to variable "User::AlereCoachingEnrolledID" differs from the current variable type (Int32)

This occurred within an Execute SQL Task
I am trying to get my entire result set with the following SQL...
IF EXISTS
SELECT [Alere_Coaching_Enrolled].[AlereCoachingEnrolledID]
FROM [dbo].[Alere_Coaching_Enrolled]
WHERE ([Alere_Coaching_Enrolled].[MatchMember] IS NULL
OR [Alere_Coaching_Enrolled].[MatchMember] = 0)
AND ([Alere_Coaching_Enrolled].[Processed] IS NULL
OR [Alere_Coaching_Enrolled].[Processed] = 0)
BEGIN
SELECT [Alere_Coaching_Enrolled].[AlereCoachingEnrolledID]
FROM [dbo].[Alere_Coaching_Enrolled]
WHERE ([Alere_Coaching_Enrolled].[MatchMember] IS NULL
OR [Alere_Coaching_Enrolled].[MatchMember] = 0)
AND ([Alere_Coaching_Enrolled].[Processed] IS NULL
OR [Alere_Coaching_Enrolled].[Processed] = 0)
END
ELSE
BEGIN
SELECT 0 AS [AlereCoachingEnrolledID]
END
I want to handle using a Sequence Container and an Expression and Constraint if I have rows to process and if I do not...thus the 0 portion of the SQL...
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
As per my understanding, you created Execute SQL Task with the query and created a variable of int32, then set ResultSet to Full result set. When you run the package, you got the error message.
I reproduced the issue in my local machine, since the query can return a result set, you set type of variable to int32, so the error occurred. A Full result set must map to a variable of the Object data type. The return result is a rowset object. We can
use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, and then use a Script Task to write the data stored in packages variables to a file.
For more information, please refer to Populating a variable with a result set section in the document:
https://msdn.microsoft.com/en-us/library/cc280492.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Get three previous records of the current record

Hi,
I need to get three previous records of the current record in an Oracle Form
Sorry for the lengthy explanation:
I have a table name: ARCHIVE_DATA with column name: coll_time and its data type DATE.
SQL> SELECT COLL_TIME FROM ARCHIVE_DATA;
COLL_TIME
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
10 rows selected.
SQL> select to_char(coll_time,'dd-mon-yyyy:HH:MI:SS') from ARCHIVE_DATA;
TO_CHAR(COLL_TIME)
12-aug-2005:02:42:00
12-aug-2005:02:43:00
12-aug-2005:02:44:00
12-aug-2005:02:45:00
12-aug-2005:02:46:00
12-aug-2005:02:47:00
12-aug-2005:02:48:00
12-aug-2005:02:49:00
12-aug-2005:02:50:00
12-aug-2005:02:51:00
10 rows selected.
This is the Requirement:
In a Form's Block(BLK1), for example: the current_record is the fifth record from the top
(i.e. 12-aug-2005:02:46:00)
When the fifth record is the current_record and When I click a button, three previous records of the
current_record should be populated on the screen.
See what I did:
I created another table same as the first table(ARCHIVE_DATA) and its name is: THREE_RECS.
I am inserting three records from the first table(ARCHIVE_DATA) into the second table: THREE_RECS
which are less than the current record and ORDER BY DESC.
CANVAS:
Two blocks (BLK1, BLK2) based on ARCHIVE_DATA and THREE_RECS are on the same CANVAS.
But the first block (BLK1) which is based on the first table:ARCHIVE_DATA is populated with one record and the
second block (BLK2) is empty.
So when I click a particular button (ex: prev_recs), the second block(BLK2) should be populated with
three previous records of the current record( :BLK1.COLL_TIME)
(off course :BLK2 populates with one record and use arrows or scrollbar to get the other two records)
This is the code I wrote in the trigger and followed by the error:
1 BEGIN
2 DECLARE
3 cursor c1 IS
4           SELECT MONITOR_ID,
5               SAMPLE_ID,
6               COLL_TIME,
7               DEW_POINT
8          FROM ARCHIVE_DATA;
9 cursor c2(passing_date IN date) IS
10           SELECT MONITOR_ID,
11               SAMPLE_ID,
12               COLL_TIME,
13               DEW_POINT
14          FROM (SELECT MONITOR_ID,
15               SAMPLE_ID,
16               COLL_TIME,
17               DEW_POINT
18          FROM ARCHIVE_DATA
19          ORDER BY COLL_TIME desc)
20      WHERE COLL_TIME < passing_date;
21     BEGIN
22     FOR cur_rec in c1
23     LOOP
24          IF (cur_rec.COLL_TIME = to_date(:BLK.COLL_TIME,'dd-mon-yyyy:HH24:mi:ss')) then
25     FOR second_cur_rec in c2(second_cur_rec.COLL_TIME)
26          LOOP
27      IF c2%rowcount < 4 then
28               BEGIN
29               INSERT INTO THREE_RECS
30                    values(second_cur_rec.MONITOR_ID,
31                         second_cur_rec.SAMPLE_ID,
32                         second_cur_rec.COLL_TIME,
33                         second_cur_rec.DEW_POINT);
34               COMMIT;
35               END IF;
36 END LOOP;
37 END IF;
38 END LOOP;
39 END;
40 END;
This is the error I am getting:
Error 103 at line 14
Encountered the symbol "(" when expecting one of the following
a PL/SQL variable or double quoted string
an expanded name
an expanded name link
a table reference __expression
a key word
Resuming parse at line 126, column 46
Thanks in advance

Why not just a simple select that doesn't involve a second table and PL/SQL?
sql>select * from t1 order by dt;
DT
08/12/2005 02:42:00am
08/12/2005 02:43:00am
08/12/2005 02:44:00am
08/12/2005 02:45:00am
08/12/2005 02:46:00am
08/12/2005 02:47:00am
08/12/2005 02:48:00am
08/12/2005 02:49:00am
08/12/2005 02:50:00am
08/12/2005 02:51:00am
10 rows selected.
sql>select dt
2    from (select dt, row_number() over (order by dt desc) rn
3            from t1
4           where dt < to_date('12-aug-2005:02:46:00', 'dd-mon-yyyy:hh:mi:ss'))
5   where rn <= 3
6   order by dt;
DT
08/12/2005 02:43:00am
08/12/2005 02:44:00am
08/12/2005 02:45:00am
3 rows selected.If the use of an analytical function (row_number()) is a problem with Forms, then the query can also be done as:
sql>select dt
2    from (select dt
3            from (select dt
4                    from t1
5                   where dt < to_date('12-aug-2005:02:46:00', 'dd-mon-yyyy:hh:mi:ss')
6                   order by dt desc)
7           where rownum <= 3)
8   order by dt;
DT
08/12/2005 02:43:00am
08/12/2005 02:44:00am
08/12/2005 02:45:00am
3 rows selected.

Get three previous records of the current record in an Oracle Form

Hi,
I need to get three previous records of the current record in an Oracle Form
Sorry for the lengthy explanation:
I have a table name: ARCHIVE_DATA with column name: coll_time and its data type DATE.
SQL> SELECT COLL_TIME FROM ARCHIVE_DATA;
COLL_TIME
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
12-AUG-05
10 rows selected.
SQL> select to_char(coll_time,'dd-mon-yyyy:HH:MI:SS') from ARCHIVE_DATA;
TO_CHAR(COLL_TIME)
12-aug-2005:02:42:00
12-aug-2005:02:43:00
12-aug-2005:02:44:00
12-aug-2005:02:45:00
12-aug-2005:02:46:00
12-aug-2005:02:47:00
12-aug-2005:02:48:00
12-aug-2005:02:49:00
12-aug-2005:02:50:00
12-aug-2005:02:51:00
10 rows selected.
This is the Requirement:
In a Form's Block(BLK1), for example: the current_record is the fifth record from the top
(i.e. 12-aug-2005:02:46:00)
When the fifth record is the current_record and When I click a button, three previous records of the
current_record should be populated on the screen.
See what I did:
I created another table same as the first table(ARCHIVE_DATA) and its name is: THREE_RECS.
I am inserting three records from the first table(ARCHIVE_DATA) into the second table: THREE_RECS
which are less than the current record and ORDER BY DESC.
CANVAS:
Two blocks (BLK1, BLK2) based on ARCHIVE_DATA and THREE_RECS are on the same CANVAS.
But the first block (BLK1) which is based on the first table:ARCHIVE_DATA is populated with one record and the
second block (BLK2) is empty.
So when I click a particular button (ex: prev_recs), the second block(BLK2) should be populated with
three previous records of the current record( :BLK1.COLL_TIME)
(off course :BLK2 populates with one record and use arrows or scrollbar to get the other two records)
This is the code I wrote in the trigger and followed by the error:
1 BEGIN
2 DECLARE
3 cursor c1 IS
4           SELECT MONITOR_ID,
5               SAMPLE_ID,
6               COLL_TIME,
7               DEW_POINT
8          FROM ARCHIVE_DATA;
9 cursor c2(passing_date IN date) IS
10           SELECT MONITOR_ID,
11               SAMPLE_ID,
12               COLL_TIME,
13               DEW_POINT
14          FROM (SELECT MONITOR_ID,
15               SAMPLE_ID,
16               COLL_TIME,
17               DEW_POINT
18          FROM ARCHIVE_DATA
19          ORDER BY COLL_TIME desc)
20      WHERE COLL_TIME < passing_date;
21     BEGIN
22     FOR cur_rec in c1
23     LOOP
24          IF (cur_rec.COLL_TIME = to_date(:BLK.COLL_TIME,'dd-mon-yyyy:HH24:mi:ss')) then
25     FOR second_cur_rec in c2(second_cur_rec.COLL_TIME)
26          LOOP
27      IF c2%rowcount < 4 then
28               BEGIN
29               INSERT INTO THREE_RECS
30                    values(second_cur_rec.MONITOR_ID,
31                         second_cur_rec.SAMPLE_ID,
32                         second_cur_rec.COLL_TIME,
33                         second_cur_rec.DEW_POINT);
34               COMMIT;
35               END IF;
36 END LOOP;
37 END IF;
38 END LOOP;
39 END;
40 END;
This is the error I am getting:
Error 103 at line 14
Encountered the symbol "(" when expecting one of the following
a PL/SQL variable or double quoted string
an expanded name
an expanded name link
a table reference __expression
a key word
Resuming parse at line 126, column 46
Thanks in advance

Change C2 to:
cursor c2(passing_date IN date) IS
SELECT MONITOR_ID, SAMPLE_ID,
               COLL_TIME, DEW_POINT
    FROM ARCHIVE_DATA
    WHERE COLL_TIME < passing_date
    ORDER BY COLL_TIME desc;And rather than populating a table with the three records, you could just select the three records using: where COLL_TIME between Prev3_time and Prev1_time

Trying to move a list of form variables to session variables of the same name

I am trying to move a list of form variables to session variables of the same name and I am having a lot of trouble.
I have never had to post of this forum with a language question in all the 10 years I have been using ColdFusion. I was a qa Engineer @ Allaire/Macromedia back when it was going from one to the other. I have a pretty good grasp of the language.
I have software that runs off a list. The fieldnames are variable and stored off in an array. It's survey software that runs off a "meta file". In this example; I have the number of fields in the survey set to 12 in the "metafile". I have each field declared in that file in array Session.SurveyField[1] and the above loop works fine. I include this "metafile" at the start of the process.
I cfloop around a struct and it works wherever I have needed to use it; such as here - writing to the database for example;
<CFQUERY NAME="InsertRec" DATASOURCE="Survey">
INSERT into #variables.SurveyTableName#
(EntryTime
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
,#Session.SurveyField[arrayindex]#
</cfloop>

   VALUES
    ('#EntryTime#'
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thisname = "Session." & Session.SurveyField[arrayindex]>
,'#evaluate(variables.thisname)#'
</cfloop>

</CFQUERY>
NOW HERE'S THE PROBLEM: I am running into trouble when trying to move the form variables to session variables of the same name. It is the only part of the software that I still need the datanames hard coded and that is a roadblock for me.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thissessionfield = "Session." & Session.SurveyField[arrayindex]>
<cfset thisformfield = "Form." & Session.SurveyField[arrayindex]>
<cfset #thissessionfield# = #evaluate(thisformfield)#>
</cfloop>
I have tried it with or without the "evaluate"; same result. It doesn't give an error; it just ignores them (session variables look as such in the next page in the chain)
q01_name=
q02_acadtechorna=
q03_water=
q04_firstaid=
q05_cpr=
q06_lifeguard=
q07_aed=
q08_projadv=
q09_color=
q10_santaclaus=
q11_supervisor=
q12_supervisoropinion=
Note: they exist because I CFPARAM them in a loop like the above at the start of the procedure) - and this works just fine!
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset dataname = "Session." & Session.SurveyField[arrayindex]>
<cfparam name="#variables.dataname#" default="">
</cfloop>
</cflock>
I EVEN tried exploiting the Form.Fieldnames list using CFLoop over the list and the same sort of logic within and it still gives me nothing....
Here's the FORM.FIELDNAMES value
"Q01_NAME,Q02_ACADTECHORNA,Q03_WATER,Q04_FIRSTAID,Q05_CPR,Q06_LIFEGUARD,Q07_AED,Q08_PROJAD V,Q09_COLOR,
Q10_SANTACLAUS,Q11_SUPERVISOR,Q12_SUPERVISOROPINION"
Here's the logic; SAME RESULT - The session variables don't get set.
<cfoutput>
<cfloop list="#Form.FieldNames#" index="thisfield">

<cfscript>
thisSESSIONfield = "Session." & thisfield;
thisFORMfield = "Form." & thisfield;
#thisSESSIONfield# = #thisFORMfield#;
</cfscript>
</cfloop>
</cfoutput>
The CFPARAM in a loop with variable output name works just fine; so does the post (which I included above) as does the SQL Create, Param Form Variables, Param Session Variables, etc.
THIS even works for moving BLANK to each session variable, to zero them all out at the end of the process;
<cflock scope="Session" type="EXCLUSIVE" timeout="30">
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
</cfscript>
<cfset #thissessionfield# = "">
</cfloop>
</cflock>
Expanding on that code, you would think this would work, but it doesn't;
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
<cfset thislocalfield = Session.SurveyField[arrayindex]>
<cfscript>
thissessionfield = "Session." & thislocalfield;
thisformfield = "Form." & thislocalfield;
</cfscript>


<cfoutput>
<cfset #thissessionfield# = "#evaluate(thisformfield)#">
</cfoutput>
</cfloop>
And see that debug code in the middle? To add insult to injury... When I uncomment that it shows me this. So it certainly looks like this should work....
Session.q01_name = "Me"
Session.q02_AcadTechORNA = "N/A"
Session.q03_Water = "Yes (certificate expired)"
Session.q04_FirstAid = "Yes (certificate is current)"
Session.q05_CPR = "No"
Session.q06_LifeGuard = "Yes (certificate expired)"
Session.q07_AED = "Yes (certificate expired)"
Session.q08_ProjAdv = "Yes (certificate expired)"
Session.q09_Color = "Gray"
Session.q10_SantaClaus = "Yes"
Session.q11_Supervisor = "Da Boss"
Session.q12_SupervisorOpinion = "Not a bad thing"
There must be some simpler way to do this. This way won't work against all odds even though it seems so much like it should.
So I end up having to hardcode it; still looking for an automated way to set these #@%$*@!## session variables over the list from the form variables of the same @#@!$#%$%# name. Do I sound frustrated???
No matter what I do, if I don't HARDCODE like this;
<cfset Session.q01_name = Form.q01_name>
<cfset Session.q02_AcadTechORNA = Form.q02_AcadTechORNA>
<cfset Session.q03_Water = Form.q03_Water>
<cfset Session.q04_FirstAid = Form.q04_FirstAid>
<cfset Session.q05_CPR = Form.q05_CPR>
<cfset Session.q06_LifeGuard = Form.q06_LifeGuard>
<cfset Session.q07_AED = Form.q07_AED>
<cfset Session.q08_ProjAdv = Form.q08_ProjAdv>
<cfset Session.q09_Color = Form.q09_Color>
<cfset Session.q10_SantaClaus = Form.q10_SantaClaus>
<cfset Session.q11_Supervisor = Form.q11_Supervisor>
<cfset Session.q12_SupervisorOpinion = Form.q12_SupervisorOpinion>
I always get this from my next page because the session variables are empty;
You must answer question 1.
You must answer question 2.
You must answer question 3.
You must answer question 4.
You must answer question 5.
You must answer question 6.
You must answer question 7.
You must answer question 8.
You must answer question 9.
You must answer question 10.
I tried duplicate as well, but I can not get the above to work...
Can anyone help me do this thing that one would think is simple????

I think if you use structure array syntax you should get the results you want.
<cfloop from="1" to="#Session.NumberOfSurveyFields#" index="arrayindex">
      <cfset session[Session.SurveyField[arrayindex]] = Form[Session.SurveyField[arrayindex]]>
</cfloop>
Or probably even easier.
<cfset session = duplicate(form)>

Replacement Path Variable with Another Variable

Hi,
I am currently trying to create a report that would need me to have the same values for different characteristics (e.g. clearing date, posting date, net due date). I have seen that there is a way in the replacement path variable that would replace its value with another variable that is ready for input. I also looked into SAP help but I can't seem to figure out on how to do it specifically. Does anyone know a step-by-step process on how to do this? How does this work?
Thank you in advance!

take an e.g.
u have characteristic say ch1
u want to restrict it with replacement path variable
first of all create a variable var1
click what it is based upon for e.g. 0calday, 0material etc.
make it user entry variable
select single or multiple entry
make it mandatory
save it and hit okey
click on ch1
right click and say restrict
in new window create a new variable
give its name and technical name
processing path is replacement path
go to next tab of replacement path
select several ooptions
replace variable with another variable
select a variable called var1
change the offset length and offset start with different parameters.
hit okey
this way u have restricted ch1 with replacement path variable var1
now when u run report u have to enter value of var1
which will then further feeded to ch1
this way u can create replacement path variables at lots of instances and then u can always feed the value from var1 at different time
make sure as this ur requirement is date
try to use 0calday as reference infoobject all the times....

Default initialisation of member variables and local variables

I don't understand why member variables are initialized with default values by Java.
Objects are initialized with "null" and primitives with "0", except boolean, which is initialized with "false".
If these variables are used locally they are not initialized. The compiler requires them to be initialized by the programer, for example "String s = null".
Why? What is the use of that difference?
And why are arrays always initialized with default values, no matter if they are member variables or local variables? For example String[] s = new String[10]; s[0] to s[9] are initialized with "null", no matter if "s" is a local or member variable.
Can someone please explain that strange difference, why it is used? To me it has no sense.

Most of the time I have to initialize a local variable
with "String s = null" in order to use it because
otherwise the compile would complain. This is a cheap
little trick, but I think everyone uses it.
I wouldn't agree with "most of the time". The only cases where it is almost necessary to do that is when the variable should be initialized in a loop or a try-catch statement, and that doesn't happen too often.
If local variables were initiliazed automatically without a warning it would be a Bad Thing: the compiler could tell when there is a possibility that a variable hasn't been assigned to and prevent manymanymany NullPointerExceptions on run time.
And you didn't answer me why this principle is not
used with arrays if it is so useful as you think.
Possibly it is much more difficult to analyse the situation in the case of arrays; what if values are assigned to the elements in an order that depends on run time properties such as values returned from a random number generator.
The more special rules one has to remember, the more
likely one makes errors.I agree, but what is the rule to remember in this case?

Using a variable inside another variable

I'm trying to use one two variable in a package with one variable feeding its value to another variable as follows:
Variable 1 = Count
Variable 2 = File_Name
Variable 1 counts up from 1;I would like to use this value as an input to Variable 2 as follows:
SELECT LOAD_FILENAME FROM DIMSTATS_FILENAME WHERE (SELECT ROW_NUMBER() OVER (Order by FILE_ID) AS RN FROM DIMSTATS_FILENAME) = #DIMSTATS_TEST.count.
How ever I am getting the following Error :
+ODI-1228: Task File_Name (Variable) fails on the target connection DDBSTAGE.
Caused By: java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver][SQLServer]The multi-part identifier "#DIMSTATS_TEST.count" could not be bound.+
I have also noticed that the value of Variable 1 is not being passed to the Select statement above through SQLServer Profiler. If I hard-code the value of #DIMSTATS_TEST.count (Variable1) the query is successful.
How can I get the value of Variable 1 to be passed to Variable 2?
Could someone please help
Thanks

You did not mentioned how you are using those variable .
You need to have these variable inside a package .
It will be like
Variable 1 (Refresh) -------OK-------->Variable 2(Refresh) ------------OK-----> Some other operation .
Thanks,
Sutirtha

How to compare previouse value in pl/sql array

DECLARE
CURSOR stg_raw_cur IS
SELECT RAW_STG_ID,
DEVICE_CD,
MODEL_VERSION,
PLATFORM_CD,
PROFILE_COOKIE,
LOCATION_CD,
SAMPLE_RATE,
EVENT_TYPE_CD,
to_char(to_date(to_date(substr(EVENT_DATE_TIME,1,8),'yyyymmdd')-1 ||
'T' ||
substr(EVENT_DATE_TIME,10,8)
|| 'Z','DD-MON-RR"T"HH24:MI:SS"Z"'), 'YYYYMMDDYY"T"HH24:MI:SS"Z"' ) EVENT_DATE_TIME,
EVENT_SPECIFIC,
BATCH_ID,
DWH_ARVL_DT,
DWH_ARVL_DT_ID,
DWH_CREATE_DT from dwh_stg.stg_raw where batch_id >= 200
order by batch_id asc;
TYPE stgrawarr IS TABLE OF stg_raw_cur%ROWTYPE;
stg_raw_rec stgrawarr;
l_batch_id NUMBER :=0 ;
v_ctr NUMBER :=0;
l_temp_batch_id number :=0;
BEGIN
OPEN stg_raw_cur;
LOOP
FETCH stg_raw_cur BULK COLLECT INTO stg_raw_rec LIMIT 100;
EXIT
WHEN stg_raw_cur%NOTFOUND;
END LOOP;
CLOSE stg_raw_cur;
for i in stg_raw_rec.first..stg_raw_rec.last
loop
dbms_output.put_line('batch id is '|| stg_raw_rec(i).batch_id );
IF l_batch_id != stg_raw_rec(i).batch_id
then
dbms_output.put_line('Different');
end if;
l_temp_batch_id := stg_raw_rec(i).batch_id;
commit;
end loop;
END;
I want to compare previous value of stg_raw_rec(i).batch_id if differnet then increament the value
else leave the same.
thanks.

Try this,
FOR i IN stg_raw_rec.FIRST .. stg_raw_rec.LAST
   LOOP
      IF l_temp_batch_id != stg_raw_rec (i).batch_id
      THEN
         --increment
         l_temp_batch_id := l_temp_batch_id + 1;
      END IF;
       DBMS_OUTPUT.PUT_LINE ('batch id is ' || stg_raw_rec (i).batch_id||' unique batch id is '||l_temp_batch_id);
    -- DBMS_OUTPUT.PUT_LINE ('batch id is ' || stg_raw_rec (i).batch_id);
    -- IF l_batch_id != stg_raw_rec (i).batch_id
    -- THEN
    --    DBMS_OUTPUT.PUT_LINE ('Different');
    -- END IF;
      l_temp_batch_id := stg_raw_rec (i).batch_id;
      COMMIT;
   END LOOP;

Error: Object variable or with variable not set while accessing BPC Excel

Hi,
I am working on BPC NW 7.5. When I am trying to access BPC for Excel I am getting the below error.
'object variable or with variable not set'
When I click on BPC for Excel it ask for the credentials, after entering it we encounter this error.
Any idea why is this happening?
Regards,
Priyanka Singh

Hi Renne,
Could you share me the solution to resolve the issue?
I am getting an error "object variable or with block variable not set" while trying to submit data through an Input schedule.
I am working on SAP BPC 7.0 NW and using MS Excel 2003.
I can log in to BPC Admin and excel with my user id and password.
Only when i am trying to click esubmit --> send and refresh schedules i am getting this error.
I checked my security profile and i have the submit data task in my task profile.
Following couple existing SDN postings i tried to check the ADD-INs of the excel on my system. However it looks like the steps listed in the existing SDN posts are for MS EXCEL 2007.
Please suggest me how do i resolve this issue. Please note I am working on SAP BPC 7.0 NW and using MS Excel 2003.
Regards,
Jagat

Error: Object variable or with variable not set while accessing

Hi Friends,
I am facing 'object variable or with variable not set' Error while opening BPC Excel.
I have done, In Excel 2007, go to Excel Option -> Add-Ins -> Manage: COM Add-ins and Go...
You look "BPC COM" disable and need enable again.
But I am getting same Error message again and again. Please help me...
I did BPC uninstall & install but still error massage poping
Thank you in Advance

Hi Kumar,
I doubt if you are following the below steps. Please confirm. Thanks
1. Open your normal Excel.
2. Check for Planning and Consolidation tab on the top ribbon.
3. I assume this wouldn't be available for you.
4. If this is not present, open the Excel Options
5. Click on Add-Ins and check the Active Application Add-ins
6. Is Planning and consolidation present in it?
7. If not, select "Disabled Add-ins" in the drop down below besides "Manage".
8. Click "GO"
9. Select the Planning and Consolidation add-in from disabled add-ins and "Enable" it.
10. Check once again if this add-in is prersent in "Active" add-ins .
11. Now close and re-open excel
12. The Tab should be present now (Planning and Consolidation)
Regards,
Sanjeev

How to pass parameter [bind variable or substitution variable] to a view?

How can I pass a parameter [bind variable or substitution variable] to a view in Oracle?
Some will tell me that this is not necessary, that I can only pass the parameter when I query the view, but I found some case where this cause performance issue. In long view where I use subquery factoring [WITH], it's necessary to pass the parameter many time through different subqueries and not only to the resulting view.
In other database (SQL Server, Access), we can pass parameters through query. I can't find how to do that in Oracle. Can some one tell me what is the approach suggest by Oracle on that subject?
Thank you in advance,
MB
What I can do:
CREATE VIEW "HR"."EMP_NAME" ("FIRST_NAME", "LAST_NAME")
AS
SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES;
What I want to do:
CREATE VIEW "HR"."EMP_NAME" ("FIRST_NAME", "LAST_NAME")(prmEMP_ID)
AS
SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES WHERE EMPLOYEE_ID IN (:prmEMP_ID);

Blais wrote:
How can I pass a parameter [bind variable or substitution variable] to a view in Oracle?
Some will tell me that this is not necessary, that I can only pass the parameter when I query the view, but I found some case where this cause performance issue. In long view where I use subquery factoring [WITH], it's necessary to pass the parameter many time through different subqueries and not only to the resulting view.Yes, there can be performance issues. Views are a form of dynamic SQL and it is hard to predict how they will perform later.
You can't pass parameters to a view. They are not functions. The mechanism to put the values in is what you mentioned, passing the parameter when you query the view.
In other database (SQL Server, Access), we can pass parameters through query. I can't find how to do that in Oracle. Can some one tell me what is the approach suggest by Oracle on that subject? This functionality is not supported.
What I can do:
CREATE VIEW "HR"."EMP_NAME" ("FIRST_NAME", "LAST_NAME")
AS
SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES;
What I want to do:
CREATE VIEW "HR"."EMP_NAME" ("FIRST_NAME", "LAST_NAME")(prmEMP_ID)
AS
SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES WHERE EMPLOYEE_ID IN (:prmEMP_ID);Include the bind value when you use the view in a SELECT. The value will be applied to the view at run-time, somthing like
CREATE VIEW "HR"."EMP_NAME_VW" ("FIRST_NAME", "LAST_NAME","EMPLOYEE_ID")(prmEMP_ID)
AS SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES;
select *
from emp_name_vw
WHERE EMPLOYEE_ID IN (:prmEMP_ID);To use EMPLOYEE_ID I added it to your list of columns in the view so it can be referenced in the WHERE clause. If you don't want to see that value don't select it from the view.

Comparing Previous shared variable to current variable Whileprintingrecords

Similar Messages

Maybe you are looking for