Compiled CHM File Does Not Reflect New Project Name

I have read many of the experts' responses to posts and found them extremely helpful. However, I have not seen one that addresses my issue.
I have RH HTML Version RH8. I renamed a project via 1) File - Rename Project and 2) Single Source Layouts - Primary Layout - Properties - Output Folder and File Name.
Two problems are: 1) The Project Folder name still reflects the old project name and 2) The CHM file still reflects the old project name.
As a result, the output Help that the user sees still has the old project name in the title bar.
All generated files as well as the RoboHelpHTML Project File were changed to the new project name, just as the RENAME PROJECTS Help says it should. However, the CHM file does not reflect the new project name as it says it should.
1) Can I change the Folder name that was created when I compiled the Help file to the correct name?
2) Can I change the FILENAME in the SELECT OUTPUT FOLDER AND FILENAME window?
3) Can I / should I rename the TOC and Index filenames from the old project name to the new project name? (Help says that changing the project name does not change these file names and it didn't.)
Will any of these actions correct the problem? I appreciate any help you can give.

Welcome to our community
Try File > Project Settings.
And if that doesn't get it, try the Project Set-up pod, windows and change the Window Caption.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

RoboHelp 8 HTML - context sensitive chm file does not open?

This works:
RoboHelp_CSH.RH_ShowHelp(0, "C:\\RoboHelp\\!SSL!\\WebHelp\\XHelp_File.htm", RoboHelp_CSH.HH_HELP_CONTEXT, 2);
This doesn't
RoboHelp_CSH.RH_ShowHelp(0, "C:\\RoboHelp\\!SSL!\\Microsoft_HTML_Help\\XHelp_File.chm", RoboHelp_CSH.HH_HELP_CONTEXT, 1);
Why does the context sensitve calls of a chm file not work?
Does it require a different map file?

Hi there
I believe the actual call is different.
Here is a copy/paste from an older RoboHelp HTML CHM file that we might use as an example:
Window-level Help for Windows applications
To call a topic using a map number, make a call to the HTML Help API using the following syntax:
HWND HtmlHelp(Window(), “c:\path\helpfile.chm”, HH_HELP_CONTEXT, Number);
To call a topic using a file name, make a call to the HTML Help API using the following syntax:
HWND HtmlHelp (Window(), “c:\path\helpfile.chm”, HH_DISPLAY_TOPIC, "topicfile.htm");
Hopefully that helps.,. Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

ITunes software does not reflect new pricing

I read that iTunes has changed their pricing structure. More popular songs are $1.29 and least popular are .69 cents. Appleinsider.com lists popular songs and their new prices but I still see them as .99 cents.
I upgraded my iTunes software to 8.1.1 and I have searched for the songs they are still at .99 cents.
Any idea why this is happening?

Thanks for the info. The article I was reading didn't specify that it applied only to the U.S.
Do you know if and when we will see the same pricing structure in Canada?

My JSP file does not reflec the change of a Bean

My test environment: Win 2000, JDK 1.3.1, OC4J(standalone)
My problem:
In servlet, the change of a Strng value is reflected at the next refresh of a browser.
But, when a jsp file call a bean's getXXX(return a String value) method, and if the String value of that bean is changed, the next refresh or visit to that jsp file does not reflect the change of that bean.
For example:
1) TestClass.java
public class TestClass {
private String txt;
public class TestClass {
txt = "Test"; ----- (g
public String getTxt() {
return txt;
2) test.jsp
<html><body>
<h2>
<% TestClass test = new TestClass(); --(h
out.print(test.getTxt()); %> --(i
</h2>
</body></html>
In my first vistit to "http://localhost:8888/test.jsp" the brower shows "Test" String, but after I change the txt value to "Test1"((g) the brower does not reflect the change.
I found that if I use <jsp:useBean id="test" class="TestClass" /> instead of (h-(i line, the brower reflects the change of the bean.
Why does this occur?
Thaks in advance.
PS) In some cases(Not above example), I get the java.lang.ClassCastException.
So Each time I change a Servlet or a Bean, I restart OC4J.
null

SangKyu,
<jsp:useBean > has a property called scope, which defaults to "page".
So the bean gets reset everytime you reload the page.
Can I suggest that you set it to "session"?
The following syntax card I have found userful:
http://java.sun.com/products/jsp/syntax.pdf
Cheers,
Scott
Atlassian - Supporting YOUR 'Orion/OC4J' World
http://www.atlassian.com - [EMAIL][email protected][EMAIL]

Output error:the name of the package "greet" does not reflect the location of this file...

output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?

The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

WAV file does not sound as good as project files

Hello,
I am a new MAC user. So I am still trying to get the hang of things: )
I am using Soundtrack Pro 2 to master a CD. The original CD has problems - some noise, low levels, EQ issues.
I began by opening a new audio project and bringing in one track(song)at a time.
The tracks are 2 channel stereo.
With help from many of the program tools, I have managed to create a better overall quality of sound.
My problem seems to be when I go to save the finished mix to a WAV file - the saved file does not have the same "punch" or even volume level that the working project file has. and in some cases sounds worse.
I have also noticed that just by opening a new audio file project the "export" option is grayed out thus I must save a "copy of"
Again since I am new to using the MAC I may be missing something.
Any direction would be greatly appreciated.
Thank you,
acreations

OK - how about this:
What would be the best format to save the project file as - getting the closest match of sound quality?

This file does not appear to be a photoshop file error.

Hello,
I know this has been covered a few times already, but none of the previous threads about it were able to help my situation.
Ok so here is what i did:
Exported a JPEG from a timeline in FCP. Brought that JPEG into PS (i am using CS3), and changed the image size from 1920x1080 to 720x480. Then saved as a JPEG, didn't tick any boxes, just used default save as settings.
I then brought those images into my Encore DVD Project, added them to the library, then placed one into a already made menu, and "sent to back".. so it became the new background. I did this with two menu's today. Note i have actually done this same exact process many times without problem. I then tried to build a dvd image of the project, and i got the "this file does not appear to be a photoshop file". Now it won't even let me open those menu's (plus another one, which i made a long time ago, and have even successfully built DVD's with), to edit them. I tried removing all the new JPEGS i added today, from the library, but still i get the same message.
The menu's that i now can't open, took a very long time to make, and i need to have this DVD completed ASAP.. as it is being released world wide in a couple of weeks and i need to get it replicated. So i don't actually have time to remake these menu's. So if anyone can help me, that would be much appreciated, as i have studio exec's cracking down on me.
Thanks in advance :-)

Now, if one Imports the JPEG with its extension changed to PSD as a Menu, then the Menu is created, including the necessary Layers. The Menu is NOW a PSD, and when Opened in PS will reflect the Layer structure (try this at home). If one had constructed Buttons in the JPEG, they would now only be graphics on that one single Background Layer in the JPEG. They would not function as Buttons, but could be useful graphics for other things. One would then need to add real Button Layer Sets to the PSD to be able to add any navigation.
Back in the post above, I suggested doing the Save_As to JPEG to see how things get changed. Use that in another test - Import that JPEG as a Menu. In Encore, try to Link to what had originally been Buttons in that Imported JPEG. What happens? Can you Link to them, even though you are now working with the created PSD?
Now, add a Button, or two, from the Library. Choose Edit in Photoshop, and look at the Layer and Layer Set structure. Things have changed from the original JPEG, with only the Background Layer. You now have that Library Button's Layer Set structure.
Good luck, and hope that this helps,
Hunt
Here are looks at the structure, using the Library Menu Business>Clock:
The Menu in PSD with the Layers Palette Open
Same Image With Layers Flattened to Save As a JPEG
What the JPEG Looks Like As a Flattened JPEG
The only way to Import that JPEG into Encore as a Menu would be to change the file extension to PSD, but what appear to be Buttons would NOT be Buttons, but just static pixels in the Background.
Message was edited by: Bill Hunt - Added graphics

Dependencies file does not exist warning

Hi all, i am getting an error when creating a new project. After adding my file, i right click and refresh dependencies. LabVIEW cannot find the file WDT Get Waveform Subset.vi from the NI waveform vi.lib.
I can open my file with no errors as normal.
Have deleted the waveform folder from the vi.lib and repaired with LabVIEW 8.2 but still has same error. When i ignore item, the file has a warning stating "file does not exist in the dependencies list.
Anyone else seen this problem?
Best Regards,
Grant

Hi Grant,
This is a strange problem most likley down to some linking errors within the project. I would recomend mass compiling the waveform directory and deleting and replacing the WDT Get Waveform Subset.vi from any VI's that use it in your project.
Regards
Jon B
Applications Engineer
NIUK & Ireland

Itunes Producer Problems Uploading - File not saving - file does not Exist.

Can someone please help me out, this problem is killing me. I've uploaded over 200 UPC Albums using Old G3 and Elderly ITunes Producer, but apple asked me to upgrade, so new machine to me Macmini maverics 10.9.? ITunes Producer 3.1.
So I click open ITunes producer 3.1. Click on make project from Audio
Files. Name and Save the project in Music-ITunes Producer-Playlists.
Plug in my external Flash drive and import the 40 Audio files for the
project. I am using an external flash drive as I can’t get ITunes Producer to
see my internal hard disk, I do not know if this is normal??
Go through the process of saving the project to Music – ITunes Producer –
Playlists – in this case 5060101121313
I then go through name all Tracks and make sure that all Data is correct.
Then when I finally go to either save the document or send it to you I get the
first Screen shot saying
"The Document "5060101121313" COULD NOT BE SAVED. The File does not exist".
As I say I have delivered 200 UPC’s to you with the old software and never
had any problems, I am in urgent need of making significant delivery to you so
would appreciate you help ASAP.
Paul

I have been victorious. Now I am going to post my solution for all those that may have the same problem in the future. I'll even throw in a few key words so it will be more easily found by the search engine.
Connection conn = null;
        try{
            //connect to database
            DAOManager dao = new DAOManager();
            conn = dao.connectToDB();
            String query = "update ASSIGNMENT set file_object = ?, filename = ?, filetype = ? where a_key = 1"; //sql query
            PreparedStatement pstmt = conn.prepareStatement(query);
            ByteArrayOutputStream baostream = new ByteArrayOutputStream();
            //write to output stream
            byte[] buffer = new byte[1024];
            int len = -1;
            while ((len = instream.read(buffer)) >= 0 )
                baostream.write(buffer, 0, len);
            baostream.flush();
            byte[] filebytes = baostream.toByteArray();
            baostream.close();
            pstmt.setBytes(1,filebytes); //set blob
            pstmt.setString(2,filename);
            pstmt.setString(3,filetype);
            pstmt.executeUpdate();
            pstmt.close();
        catch (SQLException e) {
            System.out.println(Tools.getLoggingDate() + " upload() Error uploading file -- " + e);
            e.printStackTrace();
        catch (Exception e) {
            System.out.println(Tools.getLoggingDate() + " upload() Error: " + e);
        finally {
            try{
                conn.close();
            }catch (SQLException e) {}
        }Keywords: setBinaryStream(), setBytes(), MySQL, upload file, InputStream, Blob

File does not exist: ucm cluster...

Hi all,
I've a 10gR3 UCM cluster with 2 nodes. I've replicated a new web site project.
The request to node 1, works fine, but the node 2 gives an error. I've seen the apache logs at node 2 and get the next error:
[Fri May 18 09:10:04 2012] [error] [client 134.134.20.64] File does not exist: /usr/local/apache2/htdocs/<name of the website project>
It seems that the apache (at node 2) doesn't redirect to ucm and it's looking for the web site at local (apache document root).
This cluster has serveral web sites project working fine...but with this new web site project doesn`t work...
Any advices will be appreciated.
Thanks in advanced

do you see ucm related entries in your httpd.conf? are their any other .conf files being imported? perhaps in the /conf or /conf.d directory?
I'm thinking that you are missing a <Location /siteroot> or the <Location /> element on the broken server. I can't recall the 10g config off-hand, but there are some http server related post-configuration steps for site-studio. I'm thinking that they might not be working on the broken server. perhaps a restart of the http server on the broken server?
it seems that the path is going to the http server's documentroot instead of the ucm module, which it would do if the configs were correct.
I'd double/triple check those configs & do a restart of the http server.
-ryan

This file does not have a program associated with it for performing this ac

Hi all,
After creating an application for a WebDynpro project, when I execute the project (Deploy New Archive and Run) the application I am receiving then following error message.
"This file does not have a program associated with it for performing this action. Create an association in folder options in control panel."
Pls can anyone provide the solution.
Regards
Ravi

Maybe the problem its on the Run part. It is supposed to open a navigator and go to the URL of the application you just deployed.
Try deploying on one step and then Running on other.
If it is the Run then open the navigator and test your App.

"This file does not appear to be a Photoshop file"

Ok, I used the first edition of Encore in the past, but I just installed the version that came with Premiere CS3. I used Photoshop 6.0 to do my menus in the past, but just installed the trial of Photoshop CS3.
Two things:
My old menus I created in Photoshop 6.0 won't import into the new Encore.
The new menus (I opened my old menus with CS3 and saved them out.) won't import into Encore either. In both cases, Encore says:
"This file does not appear to be a photoshop file."
The files are indeed all photoshop .PSD files and the Photoshop 6.0 files are actually menu files that were in the same .ncor project I used on the old Encore and opened on the new one.
Why won't Encore read these?
Thanks!

Bummer,
I hoped that I had helped.
Let's play 20 Questions:
The PSD files were originally created in PS 6, and you have Opened them in PS-CS3, from which they were Saved. Correct?
Did CS3 throw any error messages?
You state that they were Menus in Encore. Which version, and did they function perfectly there?
I assume that when used in a previous ver. of Encore, they did function, but now you have Opened, worked on and Saved from PS-CS3. What changes were made?
Was the Color Mode, or Bit-Depth changed, or were Alpha Channels introduced?
Has your OS been changed?
Will these files still Open fine in PS-CS3?
I'm trying to find the point that they ceased to Import, as they should and find out what might have changed with them. You might want to do a bit of a timeline on the life of these files, i.e. 1.) created in PS6. 2.) used as Menus in Encore2. 3.) Opened and changed in PS-CS3 by doing X. 4.) Saved out as PSDs and attempted to Import into Encore CS3 with above error message...
Something has to have changed, and the task is to find out what that is/was.
Hunt

File Does Not Have Proper Content

Hello,
I'm working on rebuilding a project file after some knucklehead at work deleted many of the files in the project (don't worry, the person is still alive).
After re-transcoding and re-synching all the files (interviews, to be precise), most of them have been able to be re-linked fine, even when the attributes of the clip have changed slightly. One of them, however, is being grumpy
When I try to reconnect it to the file, it says:
"The file does not have the proper content to reconnect to 'clip name' at timecode x in sequence y."
Is there any way to work around this? I don't understand why all the other clips, some of which changed much more between their original versions and the new ones I've made, were able to be relinked when this one refuses.
Any thoughts?
Cheers,
BWP

You may have to simply reimport and cut the material into the sequence.
This may be faster than trying to finesse a reconnect.
x

" File does not being with %pdf"

Sir
I have download a file from website. I use windows7 os. But there is a problem that a massege display " File does not being with %pdf". this problem is same in other browsers like- mozela firefox, google chrome etc. I use adobe reader 11. Please tell me its solution in detail.

Originally posted by: bryant.harris.irisfinancial.com
Upgrade to 2.1.0. The font stuff is fixed in 2.1.0
Bryant
"Brian Kallay" <[email protected]> wrote in message
news:ege41t$9qp$[email protected]..
> Hi,
>
> I am running BIRT 2.0.0 and pdf generation which works properly on windows
> is not working correctly on linux (Red Hat Enterprise Linux ES release
> 3). I am able to generate pdf's from charts but textual reports display
> varying results from completely blank to "File does not begin with
> '%PDF-'" errors depending on the report being used.
>
> I did find the following on a BIRT 2.0.1 project plan page, however I was
> not able to find anything corresponding in bugzilla:
>
> "BIRT Runtime can not find font for PDF generation on Linux. PDF document
> is missing text content although it displays images and outlines of
> tables."
>
> This seems to describe the behavior I am seeing in many cases, however
> with very simple reports the pdf contains the header row with the first
> column header displayed so fonts are not failing completely.
>
> I am going to try upgrading to the newest BIRT version but I am hoping
> that someone can confirm this is in fact a bug and not a configuration
> issue that has a workaround for 2.0.0.
>
> Thanks,
> Brian

Changes made to files are not reflecting

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.
SharePoint 2013
Please help.
Thanks
Pj

HI Alex,
Answers to your questions inline below:
So you are editing a file, modifying the content in there and saving it but the changes are being lost?
Ans: Yes.
1. Have you checked the file immediately after closing it to see if the changes lasted?
Ans: I am not sure, if I checked the files immediately after. I think the changes were saved properly because I didn't get any error.
I managed to print out a file with a new element on one day but on the next day in the same file, I saw that element was not there.
I sometimes open the files through the Newsfeed tab, does that matter? My understanding is that the system is going to the original location to open the file
2. Do the changes then disappear later that day at some point?
Ans: That is my understanding.
3. Does this happen just for those files?
Ans: So far I have observed it for two of the files only.
4. Do you have versioning or publishing enabled on those lists? Versioning will let you see who changed it when and approval or publishing might be hiding things?
Ans: Versioning is enabled, publishing - not.
When I go to check versions to see, if maybe someone overwritten my change and retrieve the previous version, there is no previous version with the changes i made
the previous day.
Thanks.

Compiled CHM File Does Not Reflect New Project Name

Similar Messages

Maybe you are looking for