Compiler fails to compile the file for iOS

I have been on porting a flash project on the iOS platform. At first I was able to convert small files to iOS without any error. But when i started compile a big file (fla of around 5-6 MB and 100-120 .as files) for the same it gave me an error.
Error creating files.
ERROR: formatting double using non-ecmascript rules.
Please if anyone knows why this happens please let me know. I have been behind this file for a while now.
Thanks in advance.

I will try excluding .as files one by one...but i cant put the source code as an attachment because its too big and its belongs to my firm.
I know it makes your job very difficult, Apologies for that. But if you have any other suggestions that I can try please let me know.
I really need an expert opionion.
Thanks in anticipation.

Similar Messages

  • Setup was unable to compile the file ccmclasses.mof

    First i have a access denied problem with push installation ;
    MSI: Setup was unable to create the WMI namespace CCM
    The error code is 80070005
    MSI: Warning 25101. Setup was unable to delete WMI namespace ccm\dcm
    The error code is 80070005
    Installation failed with error code 1603
    I've tried many actions include deleting repository directory and rebuilding dll and mof files ...
    Finally i've added LOCAL SERVICE, NETWORK SERVICE, and SYSTEM accounts to Local administrators group and now there is no 80070005 error.
    But i ve got a new error :)
    MSI: Setup was unable to compile the file ccmclasses.mof
    The error code is 8004402F
    MSI: Warning 25002. Failed to delete CCM_Service_ErrorHandlerRegistration.Clsid="{0F95BCE5-2209-488a-B4BC-4396AD233C8D}" from CCM
    The error code is 80041010
    Installation failed with error code 1603
    i ve almost 2000 clients with this situation and i think i lost my mind very soon.
    Any help is appreciated.

    Hi Bulent,
    Very glad to hear the issue resolved and thanks for sharing your experience, which can help other community members facing similar problems. Also, if you have any further concerns, please do not hesitate to let us know and we are happy to be of further
    assistance.
    Thanks,
    Yog Li -- Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • IMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."

    Question, asked professionally
    When will iMovie for Mac be able to open iMovie for iOS projects?
    Question, asked snarkily
    Any reasonable expectation that we will ever be able to edit projects--created in iMovie on our fancy new expensive phones--in iMovie on our fancy new expensive laptops?
    Specs
    iPhone 6 Plus (contract-free, 128 GB)
    iOS 8.1.2
    iMovie for IOS 2.1.1
    MacBook Pro (Retina, 15-inch, Mid-2014)
    OS X Yosemite 10.10.1
    iMovie for Mac 10.0.6
    Error Messages
    iMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."
    iMovie for iOS: "An error occurred during export."
    Frustration
    Manufacturer: Apple (a multibillion dollar company)
    The year: 2015
    Hours lost: Three Weeks
    Total costs for both devices: $4,000
    Background Details
    I just wasted thousands of dollars on these two hardware devices by making the rookie mistake of assuming projects were compatible across iMovie applications. However, the exported .iMovieMobile project files are in an incompatible iMovie for iOS Project format that iMovie for Mac cannot import. So I am stuck with a 15 GB .iMovieMobile project file--for an hour-long+ video--that I created and I was editing on my iPhone for weeks that I can no longer edit on my iPhone due to an error, nor potentially rescue the lost hours on my Mac, the sole reason I purchased it one day ago. The reason I can no longer edit the project on the iPhone is because iMovie for iOS suddenly stopped displaying the video of the project in preview, external display, etc. The clip snapshots remain visible and the audio remains audible, but the video appears fully black. Any attempt to export the video at any resolution generates an error message. (This error applies only to this project; other projects export without issue.) I can save to and from iTunes or iCloud without issue, but import into iMovie for Mac is unavailable for this latest version. Deleting and reinstalling the app does not resolve the issue. Nothing has resolved this issue; so I purchased the Mac as a last attempt, and it appears that I will have to begin the meticulously painful process of recreating the video from scratch with all the titling, sound effects, precise edits, transitions, organization, etc. This video was to surprise my mother for her birthday with "this is your life" footage, including my late father. It may seem like a small first-world problem, but such things carry big emotional impacts. What began as such a wonderfully intuitive and joyful experience has descended into a soul-suffering nightmare of catastrophic proportions. This software grinch stole christmas.
    Likely Suspect
    I believe this originated from Apple's confusingly designed iTunes client that removed videos used by iMovie for IOS during a sync, which I successfully restored back to the iPhone. This apparently resulted in iOS seeking and then claiming to find all of the videos, but somehow a bug in the coding causes the audio to play but not display video, and no way to resolve the bug from an enduser standpoint. I was hoping that iMovie for Mac would allow me a workaround, but I'll never know because the iOS and Mac formats are currently and dishearteningly incompatible.
    Suggestions
    I never performed a full backup of the iPhone, but I don't believe any of the iCloud nor local backups actually backup iMovie projects themselves anyway. (That's a fail.) So one must back them up manually to iTunes or iCloud.
    MANUALLY BACKUP YOUR PROJECTS DAILY, IF NOT HOURLY.
    MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING OR SYNCING FROM ITUNES.
    MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING VIDEO CREATED OUTSIDE  OF YOUR IOS DEVICE.
    Resolutions
    Hope Apple fixes this problem soon? Perhaps.
    Return the Mac to Apple, if they allow? Perhaps.
    Someone in this community will provide a magical workaround--that I haven't already attempted? Perhaps.
    As unlikely these options may be, I shudder to imagine that I may be forced to suffer no resolution and $3,000+ completely down the drain, because if iMovie for IOS worked as intended, I wouldn't have ever purchased the Mac as a last ditch effort to rescue the project. It meant that much to me to surprise my mother by attempting to retrieve this project file from oblivion--but to no avail.

    I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
    Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
    Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

  • Can I compile an App for iOS from Dreamweaver CS5.5 from a PC running Windows (7)?

    Can I compile an App for iOS from Dreamweaver CS5.5 from a PC running Windows (7)?

    No, you need XCode to compile the app and you need a Developers license to be able to publish.

  • Compile jsp file for long time

    Hi All,
    I'm applying patch on EBS 11.5.9, now it's compiling jsp file for about 1hours.
    Below is the log file,
    enumerating jsps...13577
    updating dependency...13
    parsing jsp...13
    writing deplist...13577
    initializing compilation:
    eliminating children...10257 (-3320)
    searching uncompiled...13 (10 were stale)
    translating and compiling:
    searching untranslated...13
    translating jsps...
    Please advise.
    Thanks,
    Kevin

    I'm applying patch on EBS 11.5.9, now it's compiling jsp file for about 1hours.
    Below is the log file,What is the command you use to compile JSP file?
    It is normal for compiling JSP files to run for more than 1 hour, which depends on the hardware resources you have. So, I would suggest you wait and see if the job completes successfully.
    Thanks,
    Hussein

  • Failed to load configuration file for the workflow

    There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I  tried opening his workflow and got
    the error "Failed to load configuration file for the workflow."
    Any ideas?

    Hi Carltonw1,
    Based on your description, I recommend to verify the things below:
    Clear the SharePoint Designer cache and then open the workflow.
    Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
    Ask the user to create the same workflow and associated with another list to see how it works.
    Check the ULS log for more detailed error message.
    To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Delphi doesn't compile the examples for DIO32HS

    Delphi doesn't compile the examples for DIO32HS
    Some libraries appear to be required,
    but there are none supplied
    According to the manual, one ActiveX should be sufficient.
    What version is the source provided ?

    The NI CD is Version 6.9.2
    There are examples : \National Instruments\NI-DAQ\Examples\Delphi
    There is no mention which Version of Delphi,
    I have 3,5 and 6. However there should be components
    to be installed into Delphi as DigitalWaveformContinous
    requires TCWNumEdit, TCWDI and so on.
    It also requires the units CWUIControlsLib_TLB,
    CWAnalysisControlsLib_TLB, CWDAQControlsLib_TLB which are not part of Delphi istself but have to be provided
    by NI.
    Today I'm going to try Borland C++Builder, of which
    I have version 4 and 5. This will also require some
    components to be installed in BCB, I couldn't find them
    yet.
    \National Instruments\NI-DAQ\Examples\BorlandC
    BTW: this ActiveX that was talked about couldn't be
    found on the drive either. no *.ocx
    It cannot be that hard. I just want a procedure
    to setup the PCI-DIO-32HS, in terms of what is input
    and output, how the handshaking is done and then
    read/write to the port.
    Rene

  • The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location

    Could anyone please help in resolving the following
    error:
    Server Error in '/BizTalkXXXMyAppWcfService' Application.
    The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
    Please verify that the receive location exists.
    It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
    Also it is Enabled, green, up and running.
     …and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
    location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
    adapter runs under an account that has access to the BizTalk databases. ]
       Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
    [AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
       System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
       System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
       System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
    [ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation.  The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
    receive location does not exist or is disabled..]
       System.Runtime.AsyncResult.End(IAsyncResult result) +890624
       System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
       System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107

    Hi,
    This seems  to be a permission issue.
    Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
    Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
    to be done from the framework's core .config files)
    Regards
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

  • I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

    I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

    Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
    Contact information Dennis [email protected]
    Previous contact information with your organization (DURIM):
    Dennis - i just finished my audition trial and bought the subscription the 2014 version.
    created by durin in Audition CS5.5, CS6 & CC - View the full discussion 
    DURIM - Okay.  I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
    If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]?  We'll take a look in that logfile and see if it gives us more information about why this is failing now.
    Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro?  If so, do they launch as expected or fail as well?
    I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
    Audition Log- file
    Ticks = 16       C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
    Sent from Windows Mail

  • Libre ~ Error 2038 "failed to open the file"

    Good morning.
    I have a Libre-eBook reader Pro.
    I have downloaded and synced from Kobo to my Libre with no problems.
    But when I try to download ebooks from the public library they download and open in Digital Editions just fine.  I drag and drop them into the bookshelf marked Libre-eBook Reader Pro.
    They show up when I turn on my ebook, but when I try to open them I get the 'failed to open the file'.
    I was also getting the Error 2038 in Digital Editions when I did the drag and drop thing.  I read through the forum and went through the steps recommended for the Nook ~ deleting the digital editions folder on my ebook and having Adobe reauthorize it.  I no longer get the 2038 error message in Adobe, but I am still unable to open the books from the library.
    I have tried deleting the books from ereader and ADE and redownloading from the Library.  Didn't help.
    Any other suggestions?
    Thanks.
    Heather

    Hi Ambs101010,
    Based on my research, the error can be caused by that the machine.config file is incorrect or corrupted. Please use the following steps to troubleshoot the issue and check if the error still occurs.
    1. Open the machine.config in Visual Studio and check if there is any syntax errors. If syntax errors exist, modify the machine.config file directly. For more details, please review this similar
    thread.
    2. If the error still persists, please follow the steps to replace the machine.config file. Another alternative method is to replace the current machine.config with the machine.config file from another computer.
          a.  Go to the folder C:\windows\Microsoft.NET\Framework\v2.0.50727\CONFIG
          b.  Rename the file machine.config to machine.config.old
          c.  Make a copy of the file machine.config.default and rename the copy to be machine.config
          d.  If your Operating System is 64-bit, go to the folder C:\windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG and repeat the above steps
          e.  Reboot your computer
    Thanks,
    Lydia Zhang

  • File repository server error: failed to put the file to file server

    Hi,
    Am trying to export relational and OLAP universe to repository and getting an error.
    Am using Universe Design Tool and product version is  BI 4.0 SP 5
    When I create a universe and export it for the first time it get exported successfully.
    However I tried to export same universe after making few changes, getting below error
    File Repository Server error: Failed to put the file to fileserver: frs://<FRS Location>/Universe_Name.unv already exists
    Is anybody faced such issue?
    I suspect it is a configuration issue/product bug.
    Your thoughts are highly appreciated.
    Regards,
    Vinesh

    Hello Vinesh,
    There is a workaround mentioned in the following KBA:
    1309859 - Error: WIS 00501 Universe not found when viewing Documents
    Please have a look.
    Thanks and regards,
    Madhumitha

  • Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line when making BR ISO

    Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line.  What is this and how do I correct it.  This happens whenmaking a Blu ray ISO with Menu or no menu created
    Using: I7 Windows7  machine with Production Premium CS5.5
    I get this wether I create a menu or no menu. I have tried several times with it. I do not know what the error is or how to correct it.
    I encoded with no errors in Premiere.
    I get this jsut after Encore starts to transcode the files.
    Please help,
    Steve

    Go back to http://forums.adobe.com/community/encore and enter
    Error Code 19
    in the area just under Ask a Question
    You may now read all the previous discussions of your error... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

  • I have been requested the certificate for iOS development since 4 days ago, but the result is still pending approval. So how many days should i wait?

    i have been requested the certificate for IOS Development since 4 days ago, but the result is still pending approval. So how many days should i wait?

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • In azure microsoft DEPLOYMENT FAILED while fetching the files from git

    Hello there,
    I am using windows azure service for deploying my website but it gets display error  "DEPLOYMENT FAILED"  while fetching the file from my git repository. Please suggest me.

    Hi David,
    Thank you for your response,
    I deployed it using git and now its completed but i have an anather question that is I have created the app in portal.azure.com and a mysql db, both the files and db are deployed but still I am getting error "You
    do not have permission to view this directory or page." 
    Please suggest.

  • I have the iphone 4, i want in intall the update for ios 6. it says that i need 2.4 GB, is the update going to use all of that space? that is the only amount of space available i have left on my phone.

    i would like to update my iphone 4 to the ios 6. i have 2.4 GB available and it says that in order to update my phone i need that much GB available. If i download this update is it going to use all of the remaining GBs that i have left? or will i still be left with 2.4 GBs?

    From my experience, it doesn't. It will download the file, then will have to extract the file for installation, and after that, delete everything not needed anymore. That's what seemed to happened to me.

Maybe you are looking for