Compiling FLA and AS files to SWF file using command line

I need to encorporate the .as sources and .fla file, into my
build environment, to compile the SWF file.
Right I have to Open Flash 8 to perform this and copy the SWF
created through the compilation process.
Compiling FLA and AS files to SWF file using command line is
my main purpose. If there such a utility there, does it exist for
Linux and Windows.

Try
Flash
Command or
Flash
Shell Extension
We use an enhanced version of Flash Command internally, of
which we fixed the bug of Mike Chamber's Flash Command which cannot
be run in .NEt 2.0 and added some other functionality. Once we are
comfortable with it, we will release it to the public.

Similar Messages

How to compile and run java files on a mac using command line?

can someone tell me or link me to some article on how to compile and run java files from command line on a mac? I have mac OS X leopard

What do you mean by "where to put them" ? What do you want to put anywhere ?
Have you read Peter's comment in brackets ? Perhaps you have a classpath problem ?
Edited by: Michael_Knight on Aug 31, 2008 4:23 AM

Trying to properly code a menu with buttons that can go back and forth between external swf files

I have a project I've been working on that, when properly coded, has a "main menu" with 4 "doors" (buttons). When the corresponding buttons to these "doors" are clicked, it should go to and play an external .swf file. If that doesn't make sense, think of a DVD menu. You click play movie, it plays the movie. When the movie is over, there's two buttons on that swf file to either play the movie over or go back the main menu, which is an external .swf file (Remember, we go to the movie from the menu, which is a seperate file). So far, the buttons work. The menu works. However, from the movie, at the conclusion, when I click the button to go back to the main menu, it displays the movie clip and the buttons, but none of the buttons work. I'm starting to think it has to do with the fact the main menu was written in AS3 and the movie was made in AS2. If anyone can assist me in being to able to keep both files and still navigate between the two, being able to bring up the menu from the movie and be able to play the movie again, and so on and so on, that'd be GREAT. I'm somewhat of a noob to Flash, but I learn quickly and I'm open to any suggestions. Here's the code for main menu, which I guess acts as the parent file, and the movie. If I get this to work, I essentially would duplicate the same actions for the other 4 doors, once I complete the environments for them. Thanks
Main.Fla/Swf (written in AS3)
(This is the action on the first frame, that has all the buttons. For this question, I'm just trying to properly code for 'Door4', which is the "door" to the movie.)
import flash.display.Loader;
stop();
var myLoader1:Loader=new Loader ();
Door4.addEventListener(MouseEvent.CLICK, jayzSwf);
function jayzSwf(myevent1:MouseEvent):void
          var myURL1:URLRequest = new URLRequest("jayzspeaks.swf");
          myLoader1.load(myURL1);
          addChild(myLoader1);
          myLoader1.x = 0;
          myLoader1.y = 0;
Movie.Fla/Swf (written in AS2)
(This is action on the button that returns to the menu)
on (release) {
          this.createEmptyMovieClip("container",this.getNextHighestDepth());
          container.loadMovie("main.swf");

At least you're going in the correct (mis)direction. You have AS3 loading AS2. So that's not a huge hurdle.
I believe all you really need to do is send your Main.swf a signal that the content it loaded (e.g. jayzspeaks.swf) is done and you want to get rid of it.
The code I pointed you to asks you to (upon download and import then) instantiate it in both AS2 and AS3. They give a very simple easy to understand line of code.
// as2, load this in jayzspeaks.swf
var myBridge:SWFBridgeAS2 = new SWFBridgeAS2("connectionID", clientObj);
// as3, load this in main.swf
var myBridge:SWFBridgeAS3 = new SWFBridgeAS3("connectionID", clientObj);
Make sure the connectionID matches between them. Set it to whatever you want.
When you're done with your as2 loaded content you'd send a signal (over localconnection) back to the AS3 Main like they say:
myBridge.send("someFunctionToUnloadContent");
myBridge.close();
You'd need to make the as3 function "someFunctionToUnloadContent()" (example purposes only name) and it should unload the jayzspeaks.swf that was loaded in the loader.
Make sure you get that close in there so you don't drill up a bunch of localconnection objects just like the simple source code says.

Remove / unload external swf file(s) from the main flash file and load a new swf file and garbage collection from memory.

I can't seem to remove / unload the external swf files e.g when the carousel.swf (portfolio) is displayed and I press the about button the about content is overlapping the carousel (portfolio) . How can I remove / unload an external swf file from the main flash file and load a new swf file, while at the same time removing garbage collection from memory?
This is the error message(s) I am receiving: "TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/Down3()"
import nl.demonsters.debugger.MonsterDebugger;
var d:MonsterDebugger=new MonsterDebugger(this);
stage.scaleMode=StageScaleMode.NO_SCALE;
stage.align=StageAlign.TOP_LEFT;
stage.addEventListener(Event.RESIZE, resizeHandler);
// loader is the loader for portfolio page swf
var loader:Loader;
var loader2:Loader;
var loader3:Loader;
var loader1:Loader;
// resize content
function resizeHandler(event:Event):void {
    // resizes portfolio page to center
loader.x = (stage.stageWidth - loader.width) * .5;
loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
/*loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;*/
addEventListener(Event.ENTER_FRAME, onEnterFrame,false, 0, true);
function onEnterFrame(ev:Event):void {
var requesterb:URLRequest=new URLRequest("carouselLoader.swf");
loader = null;
loader = new Loader();
loader.name ="carousel1"
//adds gallery.swf to stage at begining of movie
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requesterb);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
// stop gallery.swf from duplication over and over again on enter frame
removeEventListener(Event.ENTER_FRAME, onEnterFrame);
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent):void {
// re adds listener for contact.swf and about.swf
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
var requester:URLRequest=new URLRequest("carouselLoader.swf");
    loader = null;
loader = new Loader();
loader.name ="carousel"
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
removeChild( getChildByName("about") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of gallery.swf
MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
function Down1(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
var requester:URLRequest=new URLRequest("contactLoader.swf");
loader2 = null;
loader2 = new Loader();
loader2.name ="contact"
loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader2.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader2);
loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
function Down3(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
var requester:URLRequest=new URLRequest("aboutLoader.swf");
loader3 = null;
loader3 = new Loader();
loader3.name ="about"
loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader3.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader3);
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
removeChild( getChildByName("carousel") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
stop();

Andrei1,
Thank you for the helpful advice. I made the changes as you suggested but I am receiving a #1009 error message even though my site is working the way I wan it to work. I would still like to fix the errors so that my site runs and error free. This is the error I am receiving:
"TypeError: Error #1009: Cannot access a property or method of a null object reference."
I'm sure this is not the best method to unload loaders and I am guessing this is why I am receiving the following error message.
     loader.unload();
     loader2.unload();
     loader3.unload();
I also tried creating a function to unload the loader but received the same error message and my portfolio swf was not showing at all.
     function killLoad():void{
     try { loader.close(); loader2.close; loader3.close;} catch (e:*) {}
     loader.unload(); loader2.unload(); loader3.unload();
I have a question regarding suggestion you made to set Mouse Event to "null". What does this do setting the MouseEvent do exactly? Also, since I've set the MouseEvent to null do I also have to set the loader to null? e.g.
---- Here is my updated code ----
// variable for external loaders
var loader:Loader;
var loader1:Loader;
var loader2:Loader;
var loader3:Loader;
// makes borders resize with browser size
function resizeHandler(event:Event):void {
// resizes portfolio page to center
     loader.x = (stage.stageWidth - loader.width) * .5;
     loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
//adds gallery.swf to stage at begining of moviie
     Down();
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent = null):void {
// re adds listener for contact.swf and about.swf
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
     var requester:URLRequest=new URLRequest("carouselLoader.swf");
     loader = new Loader();
     loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader.load(requester);
     } catch (error:SecurityError) {
     trace(error);
     this.addChild(loader);
     loader.x = (stage.stageWidth - 739) * .5;
     loader.y = (stage.stageHeight - 500) * .5;
// sure this is not the best way to do this - but it is unload external swfs
     loader.unload();
     loader2.unload();
     loader3.unload();
// remove eventlistner and prevents duplication of gallery.swf
     MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     function Down1(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     var requester:URLRequest=new URLRequest("contactLoader.swf");
     loader2 = null;
     loader2 = new Loader();
     loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader2.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader2);
     loader2.x = (stage.stageWidth - 658.65) * .5;
     loader2.y = (stage.stageHeight - 551.45) * .5;
loader.unload();
loader2.unload();
loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     function Down3(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     var requester:URLRequest=new URLRequest("aboutLoader.swf");
     loader3 = null;
     loader3 = new Loader();
     loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader3.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader3);
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
     loader.unload();
     loader2.unload();
     loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
     stop();

How to insert landing site and impression code into swf files

Hi guys!
i got problems.
Actually, i dont have knowleage about tracking and clicks.
I want to find out how to use it and use it in swf files.
i want to insert landing site and impression code into swf files but i dont know how to do it.
i want insert two link below into swf files.
Impression:
http://impgb.tradedoubler.com/imp?type(inv)g(xxxxxxx)a(xxxxxxx)
Click:
http://clk.tradedoubler.com/click?p=xxxxxx&a=xxxxxxx&g=xxxxxxx
Can you show me how to do that?
Thanks for your helps.

You would need to creat a invisible button or movieclip on a new layer on top and have it fire a external javasctipt function you create in the HTML header that will then call those URLs .

Best program for converting FCP7 file to .swf file

What's the best-quality, reasonably-priced software for me to convert my .mov files to .swf files?
ffmpegX works great, but will only export to .flv and not .swf.
VisualHub is defunct and isn't working with my longer files.

This comes up quite a bit here. I'd invest in a forum search to see what others have turned up. I'm guessing you don't have Flash or After Effects? Anyway, a quick google search turned this up: Macvide VideoFlash Converter 3.1 I have no experience with this app. But the demo video clearly showed the user converting a .AVI to .flv - although .swf was the other option.

Converting *.doc files to *.swf files

I PURCHASED FLASHPAPER 2 SOME YEARS BACK TO CONVERT STATIC
WINDOWS *.DOC FILES TO *.SWF FILES TO UPLOAD ONTO A WEBSITE. I
RECENTLY BOUGHT A NEW COMPUTER WITH WINDOWS VISTA. FLASHPAPER 2
DOES NOT WORK ON VISTA. I WAS INFORMED BY ADOBE THAT FLASH CS3 CAN
RUN ON VISTA. I WOULD LIKE TO FIND OUT HOW TO CONVERT STATIC *.DOC
FILES INTO *.SWF FILES ON FLASH CS3.

you can also try this:
Step 1. convert .doc file to .pdf
you can find a free converter here
http://sourceforge.net/projects/pdfcreator/
Step 2. convert the .pdf file to .swf
using PDF2SWF & SWFCombine from
http://www.swftools.org/

Read in file name + path using command line arguments

Hi guys,
I am trying to use command line arguments to read in the name of two files. The code below works as long as the files are on the class path.
public class cmdLineArguments {
     public static void main(String[] args) {
          String xmlFile1 = args[0];
                String xmlFile2 = args[1];
          System.out.println ("\nXmlFile1: " + args[0] + "\nXmlFile2: " + args[1]);
}I would like to be able to read files that are not on the class path as well by entering their full path along with their names.
In other words, It works if I type:
C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs file1.xml file2.xmlbut not if I type:
C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xmlWould anyone please explain how I can edit the code to make it work? I guess I could take them both as a String, modify them manually (add a \ to it etc) but is there an easier way to do it? Even a reference to a tutorial, article etc about this would be very much appreciated.
Also, any idea why a code would compile and run fine in Eclipse but would create an error from command line?
Thanks a lot.

You need to learn about cmd.exe which is used to process the command line. The arguments passed to any program is the command line split at white space so your command line arguments of
c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xmlis turned into an array of
"c:\Documents", "and", "Settings\user\desktop\file1.xml", "c:\Documents", "and", "Settings\user\desktop\file2.xml"In other words instead of 2 arguments you actually have 6.
To get round this the file names need to be quoted
java cmdLineArgs "c:\Documents and Settings\user\desktop\file1.xml" "c:\Documents and Settings\user\desktop\file2.xml"

How to use command line with acrobat to extract page(s) from pdf file?

I have adobe acrobat, and have a pdf file with over 500 pages. I need to extract small chunks of pages from it as seperate pdf files. I was hoping I could use command line interface to do this faster.
Something like:
acrobat src des start end
so for example
adobe file.pdf my_folder 3 5
Is this possible? There are many chunks and I don't want to manually do it for every chunk. Command line would be much easier...
Thanks

I can't find any programs... sorry.
Can you create one for me please.
It should at least have these 5 arguments: (well the first one is not neccessary since were not using acrobat anymore...)
[program] [src path/src file] [destination path/file name] [start page (inclusive)] [end page (inclusive)]
for example:
acrobat ./my_file.pdf ./my_folder/chunk1.pdf 3 5
if start page == end page, then it only extracts that one page.
So this way I can just stack these comands on a .bat file or something (maybe like 100 commands), then run the bat file, and it will create all the files.
Thanks for doing this, it is appreciated.

Firefox always start it self when windows start (around 5 - 6mb ram) with process explorer i got this [Path C:\Program Files\Mozilla Firefox\firefox.exe} [Command line "C:\Program Files\Mozilla Firefox\firefox.exe" -requestPending -osint -url "%1"]

firefox always start it self when windows start (firefos.exe around 5 - 6mb ram) with process explorer i got this
[Path >> C:\Program Files\Mozilla Firefox\firefox.exe]
[Command line >> "C:\Program Files\Mozilla Firefox\firefox.exe" -requestPending -osint -url "%1"]
is this a bug or a virus?? Thank you..
== windows start

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Can an Access 2013 accdb file be encrypted using command line switches?

Can an Access 2013 accdb file be encrypted using command line switches?
I found all the command switches, but nothing about encrypting. And I've searched online and found nothing.
Can this be done?
Thanks!

Hi Sharon2000,
I think you could try the Database.NewPassword Method (DAO) in the VBScript file, and you could get more information about it from the link below:
#Database.NewPassword Method (DAO)
https://msdn.microsoft.com/en-us/library/office/ff844754.aspx
Here is a simple demo to achieve your issue.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Deploy EAR file into WAS using command line

hi,
I have an EAR file and i want to deploy it into WAS using command line interface.
I have seen the SDM_commandline.doc file in SDM directory ..it talks about deploying SDA's and SCA's :-
> sdm deploy file=<...>
however it is not working for EAR files...is there any way to deploy EAR files directly or should I convert the EAR to SDA and then deploy using this command.
thanks

For NW Java releases prior to 7.1, an EAR file needs to be transformed into a SDA file, then it can be deployed. For later releases, an EAR file can be directly deployed.

How to automatically generate a build file of the application from command-line

Hi All
How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?
Thanks

User, which jdev version do you use?
I don't think you can do this. You can only create an ant build.xml from the project inside jdev.
You can use ojdeploy to build the project. This is the only method which will also make the necessary changes to the descriptors.
Timo

Why not all jars picked up by ojdeloy and how to generate build.xml from command line and not JDEV GUI - quick question

Hi All
We have 11.1.1.7 ojdeploy to compile our app.
We notice in the log that not all jars are used in classpath arguments when we explicitly set them up for compilation.
eg:
<path id="classpath">
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/a.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/b.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/c.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/d.jar"/>
</path>
Log Output -
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/bin/javac
[ora:ojdeploy] -g
[ora:ojdeploy] -Xlint:all
[ora:ojdeploy] -Xlint:-cast
[ora:ojdeploy] -Xlint:-empty
[ora:ojdeploy] -Xlint:-fallthrough
[ora:ojdeploy] -Xlint:-path
[ora:ojdeploy] -Xlint:-serial
[ora:ojdeploy] -Xlint:-unchecked
[ora:ojdeploy] -source 1.6
[ora:ojdeploy] -target 1.6
[ora:ojdeploy] -verbose
[ora:ojdeploy] -encoding Cp1252
[ora:ojdeploy] -classpath
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/resources.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/rt.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/jsse.jar:
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/a.jar"/>
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/c.jar"/>
1- Is it because it depends on how jpr or jws are configured ?
2- How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?

The first warning is happening because you're stating drivers for input devices without need. You haven't disabled hotplug so evdev gets used instead of kbd. This is normal, and you should change the driver line from kbd to evdev so that whatever options (if any) you've specified for the keyboard get parsed.
The second warning is about you not installing acpid.
The third I have no idea about, but look at the synaptics wiki. None of the (WW) are related to your video card.
And every card that has 2 or more output ports show up as "two cards". You also don't need to specify the pci port in xorg.conf. edit: this is the general case with laptops, might be different for desktops.
When I do lspci -v I get:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d0f0 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
And it doesn't matter if it errs in trying to sli up with it self. That's just not a possibility.
Last edited by gog (2009-10-15 23:59:49)

How to duplicate a target and add resources in xcode using command line?

I am trying to use command line tools to create, add resources, build, archive and export to ipa in xcode. I could do the Build, Archive and Exporting to IPA through the command line tools(xcodebuild). But I also wanted to duplicate the target in the same project,add a new Info.plist to the duplicated target resource through command line itself. How to do it? I could not find any valuable answers by Googling. I could not find any proper documentation also in Apple Sites.
Is there any tools that can be used to perform these? I don't want to use the UI. Please, help me out.

The Mac App Store is not appropriate for command line tools. You can use any language you want.

Compiling FLA and AS files to SWF file using command line

Similar Messages

Maybe you are looking for