How to duplicate a target and add resources in xcode using command line?

I am trying to use command line tools to create, add resources, build, archive and export to ipa in xcode. I could do the Build, Archive and Exporting to IPA through the command line tools(xcodebuild). But I also wanted to duplicate the target in the same project,add a new Info.plist to the duplicated target resource through command line itself. How to do it? I could not find any valuable answers by Googling. I could not find any proper documentation also in Apple Sites.
Is there any tools that can be used to perform these? I don't want to use the UI. Please, help me out.

The Mac App Store is not appropriate for command line tools. You can use any language you want.

Similar Messages

  • How do I generate PDF and CHM files from the a command line in windows?

    I am trying to set up a PC to build some documents during the night. I was looking for a way to get framemaker to generate PDF and CHM files via a command line in windows? How is this done with FrameMaker 12
    Thanks for the help
    Alex

    Hi,
    The part with generate a PDF via a jsx seems to work OK, except when FrameMaker decides that it will not work anymore. I must say I am not impressed with the stabillity of FrameMaker 12, there is room for a lot of improvement!.
    I have given up on how to figure out how to get FrameMaker 12 to generate chm files via jsx scripts, any pointes are still very welcome.
    The route I have taken is I make a RoboHelp project for each chm files I need to generate. The only thing this RoboHelp project contains is a link to the actual FrameMaker project I want to generate a chm file.
    To make the chm I start RoboHelp with a script that
    1) Opens the desired project
    2) Sets the desired output chm files name
    3) Generates the chm file
    4) And finally quits RoboHelp
    Below is a copy of the jsx in case anyone can reuse anything.  And yes parameters are transfered via enviroments variable. I have later learned there is some way to read the parameters given at a command line but this seems to work so I stick to this for now.
    // Get parameters
    var RhProjName = $.getenv("RH_PROJ_NAME");
    var RhChmName = $.getenv("RH_CHM_NAME");
    var RhLogFileName = $.getenv("RH_LOGFILE_NAME");
    var RhLogFile = new File(RhLogFileName);
    RhLogFile.open("w", "TEXT");
    RhLogFile.writeln("RH_PROJ_NAME : ", RhProjName);
    RhLogFile.writeln("RH_CHM_NAME : ", RhChmName);
    doc = RoboHelp.openProject (RhProjName, 1);
    var sslmngr = RoboHelp.project.SSLManager;
    for(var i = 1; i<=sslmngr.count; i++){
      var ssl = sslmngr.item(i);
      if(ssl.name == 'Microsoft HTML Help') {
        // Set the output location and file name
        ssl.setSpecificProperty("DestinationProjectName", RhChmName);
        if (doc.saveAll(true) ) {
          RhLogFile.writeln("saveAll returned TRUE");
        } else {
          RhLogFile.writeln("saveAll returned FALSE");
        if ( ssl.generate() ) {
          RhLogFile.writeln("ssl.generate returned TRUE");
        } else {
          RhLogFile.writeln("ssl.generate returned FALSE");
      } else {
        // alert ("Found " + ssl.name + " dont do anything");
    doc.saveAll(true);
    RhLogFile.close();
    RoboHelp.closeProject();
    RoboHelp.quit();

  • How to enable telemetry logs and where can i find the command line for sun

    Hi i tried creating the telemetry logs directory but the logs are not being populated. i created the following directory:-
    /opt/SUNWmsgsr/data/telemetry/imap/usersns1
    where usersns1 is the userid.
    Also pl. tell me where can i get the command list for sun one messaging server to use the command line utility to list, delete mailboxes. also can i search for all the mailboxes under one domain name. if yes then which command i have to use.
    thanks in advance.

    Hi,
    Hi i tried creating the telemetry logs directory but
    the logs are not being populated. i created the
    following directory:-
    /opt/SUNWmsgsr/data/telemetry/imap/usersns1
    where usersns1 is the userid.Make sure the permissions (ownership) on the user directory and the sub directory match those that messaging server uses - by default mailsrv:mail. This is the most common cause of the telemetry data not being created. The other thing to verify is that the user's account isn't stored as user@domain, otherwise you may need to create the directory as the entire user@domain (try both just to be sure).
    Also pl. tell me where can i get the command list
    for sun one messaging server to use the command line
    utility to list, delete mailboxes. also can i search
    for all the mailboxes under one domain name. if yes
    then which command i have to use.The Messaging Server reference guide is a good place to start (lists all the command-line utilities/flags and what-not):
    http://docs.sun.com/app/docs/doc/819-4429?l=en
    The mboxutil command is used to list/create/delete mailboxes and you can use a pattern to only list those mailboxes in a specific domain.
    Regards,
    Shane.
    thanks in advance.

  • How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line ?

    How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line, on windows ?
    firefoxe... -option? <addon name>?....?

    Does opening this page help: <b>about:addons</b>
    *https://developer.mozilla.org/en/Command_Line_Options

  • Create folio and add content to it using CIS 11g

    Hello,
    How should I create a folio and add content to it using CIS 11g? tried following code but it fails with error code
    Caused By: intradoc.data.DataException: !csGetFileNeedsParameter,Latest
    ISCSAdministrativeAPI adminAPI =
    application.getUCPMAPI().getActiveAPI().getAdministrativeAPI();
    Map arguments = new HashMap();
    arguments.put("NumChanges", "1");
    arguments.put("change0", "1607:addContent:1F93-3807-DFB3-4BDF-8F63");
    arguments.put("RevisionSelectionMethod", "Latest");
    arguments.put("change_data0", "dID:410");
    ISCSServerResponse serverResp =
    adminAPI.executeIDCService(context, "UPDATE_FOLIO", arguments);
    Any help is appreciated. Thanks.

    If you only use dID, you need to use: putLocal("RevisionSelectionMethod", "Specific")
    I never got this working with strictly dID. Once I fed it dDocName and then used the below it got rid of the error:
    putLocal("RevisionSelectionMethod", "Latest")
    Good luck!

  • How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

    How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

    Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
    Check your printer's page settings.

  • How to change a setting in the Java Control Panel with command line

    Hi,
    I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
    I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
    Edited by: 897133 on Nov 14, 2011 7:15 AM

    OK figured it out. This is for the next person seeking the same solution.
    When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
    Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
    __deployment.config__
    It should look like this inside:
    *#deployment.config*
    *#Mon Nov 14 13:06:38 AST 2011*
    *# The First line below specifies if this config is mandatory which is simple enough*
    *# The second line just tells Java where to the properties of your Java Configuration*
    *# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
    deployment.system.config.mandatory=True
    deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
    If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
    How?
    Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
    Add this line:
    deployment.security.SSLv2Hello=true
    Maybe you want to disable Java update (which is a big problem for enterprises)
    Add these lines:
    deployment.javaws.autodownload=NEVER
    deployment.javaws.autodownload.locked=
    Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
    #NoTrayIcon
    #RequireAdmin
    #Region ;**** Directives created by AutoIt3Wrapper_GUI ****
    #AutoIt3Wrapper_UseX64=n
    #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
    Func _JavaConfig()
         $ConfigFile_1 = @TempDir & "\deployment.properties"
         $ConfigFile_2 = @TempDir & "\deployment.config"
         FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
    FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
         FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
         FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
         Sleep(10000)
         FileDelete(@TempDir & "\deployment.properties")
         FileDelete(@TempDir & "\deployment.config")
    EndFunc
    _JavaConfig()
    Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
    Edited by: 897133 on Nov 16, 2011 4:53 AM

  • How can I create a NetBoot image using command line tools?

    Is it possible to create a NetBoot image entirely using command line tools?
    (That is, without using the SystemImageUtility)
    If so, are there reasonable instructions posted somewhere?
    I don't believe I can use SystemImageUtility with my current setup,
    but I would be happy to hear how I could:
    I have a set of Xserve clusternodes but without optical drives or video cards.
    One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
    They are wired to a gigabit switch.
    I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
    I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
    I have tried to start one node in target(Firewire) mode, connect it via Firewire
    to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
    But a NetBoot image requires the whole nbi file, right?
    Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
    I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
    Thanks for anyones help.
    dmaus
      Mac OS X (10.4.4)  

    To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
    If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

  • Can I manage resource designates via the command line?

    I would like to manage resource designates via the command line and
    the <i>"unires"</i> command does not seem to have this function. Could I use
    <i>"uniadmrights"</i>?
    # uniadmrights -e -add -resrc -n 10000
    <br>
    -e modify user rights, search filter
    <br>
    -add set user right on (-e only, default)
    <br>
    -resrc resource administration
    <p>
    The <I>uniadmrights</I> command is not able to assign designate rights. You can assign
    rights such as the ability to create and manage public and administration
    groups. The "Resource administration" flag exists so far only on the
    server side, and it is currently not used by the client. This is for future use.
    <p>
    There are two ways to assign a designate to a resource:
    <ol>
    <LI>Log on as the resource via the client. There are only a few commands
    available, one of them being the "Access Rights".
    <P>
    <LI>On the server side:
    <P>
    Edit the /users/unison/misc/resource.ini
    file and create a new section to specify the resource designate.
    <P>
    [DES]
    Designate0 = S=Lastname/G=Firstname
    <P>
    Run the unires command as follows:
    <P>
    % unires -mod "R=resourcename" -s DES 10000
    [sysOpPsw]
    </OL>
    <P>
    <B>Note:</B> The full resource name should be used eg. "R=Resource/N=1/CA=2/ID=2
    57"

    This sounds like a job for wget . You'll have to build and run it on Unix or Cygwin.
    You could also build a test suite to do this in various testing tools. You could even write a short Perl or Groovy script to do this, or a slightly longer Java class.

  • How to Create Test Sequence Document in HTML using command line

    How to Create Test Sequence Document  in HTML using command line
    I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using   C#  .Net

    If you aren't able to figure out how to call a C++ DLL in .net then there may be another option.  Unfortunately I don't know how to do this off the top of my head and I don't have an example.
    The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options.  Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
    Hope this helps,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • How to call a ODI Job using Command line?

    Hello All,
    Please help me on this..
    How to call an ODI Job using Command line?
    Thanks
    Ravikiran

    Generate a scenario of your package. Then go to <ODI_HOME>/oracledi/agent/bin in command prompt and invoke startscen command .
    startcmd.sh OdiStartScen -SCEN_NAME=scn_load_data -SCEN_VERSION=001 -CONTEXT=GLOBAL -AGENT_CODE=odiSchedAgent001
    Bhabani
    http://dwteam.in

  • How to upde userid to uid=0 using command line?

    Hi all,
    I made a new user "sysadmin" by typing at root command line:
    # useradd sysadmin (all default profile values)
    What is the command (line) to update its UID to "0"?
    Thanks you very much in advance.
    Ms KK

    In general, having multiple accounts with the same UID is a bad idea. To have
    multiple "root" accounts is very, very bad idea.
    If you need an ordinary mortal user to be able to execute privileged commands,
    set up the sudo(1) facility. This will let you grant permission with a fine
    level of control about exactly which program or command is being used. As a
    bonus, you will get an audit trail of who did what as whom.
    The great thing about sudo(1) is that you can grant root privilege without
    having to give out root's password.
    Now, assume you make duplicate "root" accounts. You get offered a better job
    and leave. The new sysadmin will need careful briefing before doing anything.
    This will create a major maintainability issue long term.
    If you want another root user for disaster recovery or losing the password,
    there are better alternatives such as:
    -- Reboot the system using rescue mode from the installation disks.
    -- Boot into single-user mode by interrupting the GRUB install sequence and appending "s" to the kernel command line.
    -- Boot into an interactive shell by appending the "init=/bin/bash" clause using the same technique.
    These are some of the known, common, best practice methods of handling this
    situation. A custom solution here could be quite dangerous and hard to maintain
    in the long run.
    Please don't.

  • How to open url in acrobat reader using command line

    Hi,
    I need to open file from url using command line, but I'm still getting some error (wrong filename).
    I've tried for example this command:
    AcroRd32.exe http://www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf
    Can anyone help me and tell me what's wrong?

    You can't use a URL as parameter for AcroRd32.exe.

  • Compiling FLA and AS files to SWF file using command line

    I need to encorporate the .as sources and .fla file, into my
    build environment, to compile the SWF file.
    Right I have to Open Flash 8 to perform this and copy the SWF
    created through the compilation process.
    Compiling FLA and AS files to SWF file using command line is
    my main purpose. If there such a utility there, does it exist for
    Linux and Windows.

    Try
    Flash
    Command or
    Flash
    Shell Extension
    We use an enhanced version of Flash Command internally, of
    which we fixed the bug of Mike Chamber's Flash Command which cannot
    be run in .NEt 2.0 and added some other functionality. Once we are
    comfortable with it, we will release it to the public.

  • How to use command line with acrobat to extract page(s) from pdf file?

    I have adobe acrobat, and have a pdf file with over 500 pages. I need to extract small chunks of pages from it as seperate pdf files. I was hoping I could use command line interface to do this faster.
    Something like:
    acrobat src des start end
    so for example
    adobe file.pdf my_folder 3 5
    Is this possible? There are many chunks and I don't want to manually do it for every chunk. Command line would be much easier...
    Thanks

    I can't find any programs... sorry.
    Can you create one for me please.
    It should at least have these 5 arguments: (well the first one is not neccessary since were not using acrobat anymore...)
    [program] [src path/src file] [destination path/file name] [start page (inclusive)] [end page (inclusive)]
    for example:
    acrobat ./my_file.pdf ./my_folder/chunk1.pdf 3 5
    if start page == end page, then it only extracts that one page.
    So this way I can just stack these comands on a .bat file or something (maybe like 100 commands), then run the bat file, and it will create all the files.
    Thanks for doing this, it is appreciated.

Maybe you are looking for