Compiz on start up

I did a re-install because of other issues and for the life of me, I cannot get Compiz to start when I boot my machine. I have to pull up the icon and then it starts. I am using compiz with gtk-window-decorator instead of Emerald.
This is what my startup looks like:
[Desktop Entry]
Type=Application
Encoding=UTF-8
Name=Compiz
Exec=/usr/bin/compiz ccp #Make sure ccp is included so that Compiz loads your previous settings.
NoDisplay=true
# name of loadable control center module
X-GNOME-WMSettingsModule=compiz
# autostart phase
##-> the folloing line cause gnome-session warning and slow startup, so try not to enable this
# X-GNOME-Autostart-Phase=WindowManager
X-GNOME-Provides=windowmanager
# name we put on the WM spec check window
X-GNOME-WMName=Compiz
# back compat only
X-GnomeWMSettingsLibrary=compiz
Pretty much straight from the wiki.
But for some reason, it won't start on boot since I did a full reinstall. None of the desktop effects work. Rotating the cube, zoom, etc. If I use the compiz icon, then it will work.
I'm completely stuck.

AurosGamma wrote:
niclasc wrote:
I have the same problem. Unable to start Compiz on start up. It works if I run fusion-icon after i've logged in.
I did:
$ gconftool-2 --set -t string /desktop/gnome/session/required_components/windowmanager compiz
And now Compiz start but I have no borders on my windows. If I start with fusion-icon I have borders
What do I need to do?
Make sure that you have installed compiz-decorator-gtk
$ pacman -S compiz-decorator-gtk
Then go to fusion icon and set window decorator to gtk window decorator OR put the following text on terminal
$ gtk-window-decorator --replace
If you have problems let me know
Did that and still no Compiz on startup. When I start Compiz Fusion Icon I get the wrong theme. If I switch to Emerald then it looks ok. I want to use Emerald
I must be doing something wrong. But what?

Similar Messages

Compiz not starting automatically?

I'm using xfce. I did what the archwiki said add to the xml config file. But when I reboot, It still uses the defualt windows manager. It works with the fusion icon, but I don't want to use the fusion icon.
Last edited by wsamh (2012-02-22 23:12:58)

I would try typing this in a terminal while running xfce first to see if it will work. Try a shortened version.
compiz --replace
if you have problems I would try adding
--indirect-rendering
or
--loose-binding

Compiz doesn't automatically start anymore after gnome 2.30 update

My logs only show this "Apr 1 18:15:26 arch gnome-session[2435]: WARNING: Application 'compiz.desktop' failed to register before timeout" error. But i'm pretty sure it always showed that error even before i upgraded today.

Is it starting for you when you use "compiz --replace &" in terminal? For me it is, but without emerald, so I don't have any window borders...
EDIT: OMG, when I used Fusion-icon then it started normally... Weird...
EDIT2: I've changed in /usr/share/applications/compiz.desktop line where compiz is started from "compiz" to "/usr/bin/compiz ccp" and it's working now.
Last edited by megawebmaster (2010-04-01 20:15:46)

[SOLVED] Want to use gnome decorate in Compiz-Fusion

Hello,
I am a convert from Ubuntu. I have succesfully installed Compiz Fusion. However, I don't like the Emerald theme manager. I would like to use the gtk decorator instead. How is that possible ? I am currently running Compiz by start the Fusion-icon
Thanks
Last edited by cdahmedeh (2009-03-14 15:03:27)

There is a package in the community repository that provides this functionality. I think it's called compiz-decorator-gtk.
And welcome to arch!

Compiz can't find manageable screens

Running "compiz" or "compiz --replace" fails with the following error:
compiz (core) - Error: Another window manager is already running on screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Fusion-icon says there is "No GLX_EXT_texture_from_pixmap with direct rendering context". I try with "LIBGL_ALWAYS_INDIRECT=1" and still there are no screens found by compiz. Starting compiz from xinitrc also fails.
The driver in use is the open source one, also, I have no xorg.conf. There is direct rendering.
The solutions in the wiki for the GLX_EXT problem didn't help.
Do you have any ideas how to get compiz running?
(And a small question. If I have no xorg.conf, how do I select a different driver (fglrx)?)
Thanks for reading.

Make sure "fglrx" does not exist in your Modules line (or any other config file that you may have put it in: rc.conf, etc)

Compiz Broken [Fixed]

Updated this morning, now can't get compiz to start-> leaves me without windows borders or any of the compiz effects.
When I try to start fusion-icon I get:
* Detected Session: kde
* Searching for installed applications...
* NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING
* Using the GTK Interface
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
* Starting Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp --loose-binding
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
compiz (core) - Error: Plugin 'core' has ABI version '20090207', expected ABI version '20080828'.
compiz (ccp) - Error: InitObject failed
compiz (core) - Error: Couldn't activate plugin 'ccp'
Last edited by virati (2009-02-24 17:55:05)

Where exactly did you guys get compiz 0.8?
Even with forcing my mirror to sync it shows:
[kurt@arch ~]$ pacman -Ss compiz-core
community/compiz-core 0.7.8-1 (compiz compiz-kde compiz-gtk compiz-fusion)
Composite manager for Aiglx and Xgl
So now when i go to do a pacman -Syu I get:
[kurt@arch ~]$ sudo pacman -Syyu
:: Synchronizing package databases...
testing 13.3K 58.4K/s 00:00:00 [#####################] 100%
core 32.2K 97.8K/s 00:00:00 [#####################] 100%
extra 390.4K 283.9K/s 00:00:01 [#####################] 100%
community 363.5K 280.3K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
resolving dependencies...
error: cannot resolve "compiz-core>=0.8.0", a dependency of "libcompizconfig"
error: failed to prepare transaction (could not satisfy dependencies)
:: libcompizconfig: requires compiz-core>=0.8.0
It also appears my mirror is synced up to date. If I search for dssi which the website says is the newest package it shows the newest version:
[kurt@arch ~]$ pacman -Ss dssi
testing/dssi 1.0.0-1
DSSI is an API for audio plugins, with particular application for software
synthesis plugins with native user interfaces.
Any ideas?

Problems with gconftool and compiz

I'm trying to get compiz to start on boot per the wiki's instructions. Although when I run
gconftool-2 --set -t string /desktop/gnome/session/required_components/windowmanager compiz
and it returns
Error setting value: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Cannot replace xfwm4 with compiz

By following the wiki exactly, nothing happens when I change the configs to run compiz instead of xfwm4. I have erased the default configs in my home directory and made the appropriate changes in /etc instead ... nothing. What should I do to get compiz to start instead of xfwm4?

By nothing happens you mean that xfwm4 still starts on bootup?

Composite windows manager window refresh problem

Hello, I'm a very satisfied user of Arch Linux, and I would like to say it is la creme de la creme (the best) distribution for users that wish to control their system (and not vice versa).
However, recently, I had some strange problems with compiz fusion, beryl, and even xcompmgr. I'm using xorg from testing, I do not have a xorg.conf, and I have a GMA 3100 IGP. Compiz fusion was working correctly, without xorg.conf, and after I did the upgrade to kernel 2.6.23 (the day the package was put online), compiz-fusion started to have quite weird problems. It is not kernel related, I compiled my own 2.6.23 kernel, then a 2.6.22.9, and it just did not work as expected.
When I move windows, decoration and the window is just fine. However, the windows stop refreshing (I have to shade the window to refresh it), and when I scale it (not the compiz plugin), the decoration and the window just stretches, and then it refreshes sometimes. I was not able to do a decent video capture of my screen, but I hope the description gives you an idea of the problem. I tried with a xorg.conf, setting xaa acceleration, setting "XAANoOffscreenPixmap" xorg.conf option, adding my user into the video group using gpasswd, and I must admit, it changes nothing.
xorg log:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/noaarch:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux noaarch 2.6.23.1-rt11vk1 #2 SMP PREEMPT RT Fri Nov 9 16:42:08 EST 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 13 20:14:53 2007
(EE) Unable to locate/open config file
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,29c0 card 1458,5000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,29c2 card 1458,d000 rev 02 class 03,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2937 card 1458,5004 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2938 card 1458,5004 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1a:2: chip 8086,2939 card 1458,5004 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,293c card 1458,5006 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,293e card 1458,a002 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2940 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2948 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:5: chip 8086,294a card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2934 card 1458,5004 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2935 card 1458,5004 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2936 card 1458,5004 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,293a card 1458,5006 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 92 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2916 card 1458,5001 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2922 card 1458,b005 rev 02 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,2930 card 1458,5001 rev 02 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 197b,2368 card 1458,b000 rev 00 class 01,01,85 hdr 00
(II) PCI: 03:00:0: chip 10ec,8168 card 1458,e000 rev 01 class 02,00,00 hdr 00
(II) PCI: 04:00:0: chip 1131,7130 card 18d0,2100 rev 01 class 04,80,00 hdr 00
(II) PCI: 04:01:0: chip 1274,5880 card 1274,8001 rev 02 class 04,01,00 hdr 00
(II) PCI: 04:07:0: chip 104c,8024 card 1458,1000 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:28:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:4), (0,2,2), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:5), (0,3,3), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xf1000000 - 0xf2ffffff (0x2000000) MX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x20000000 - 0x200fffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:30:0), (0,4,4), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xf3100000 - 0xf31fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xf3200000/19, 0xe0000000/28, 0xf3000000/20, I/O @ 0xe100/3
New driver is "i810"
(==) Using default built-in configuration (55 lines)
(==) --- Start of built-in configuration ---
Section "Module"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
Load "type1"
Load "record"
Load "dri"
EndSection
Section "Monitor"
Identifier "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default i810 Device 0"
Driver "i810"
EndSection
Section "Screen"
Identifier "Builtin Default i810 Screen 0"
Device "Builtin Default i810 Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default vga Device 0"
Driver "vga"
EndSection
Section "Screen"
Identifier "Builtin Default vga Screen 0"
Device "Builtin Default vga Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default i810 Screen 0"
Screen "Builtin Default fbdev Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default vga Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default i810 Screen 0" (0)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default i810 Device 0"
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default fbdev Device 0"
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default vesa Device 0"
(**) |-->Screen "Builtin Default vga Screen 0" (3)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default vga Device 0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[1] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[2] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[3] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[4] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[5] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[6] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[7] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[8] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[9] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[11] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[12] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[13] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[14] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[15] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[16] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[17] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[18] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[20] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[21] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[22] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[23] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[24] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[25] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[26] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[27] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[28] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[29] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[30] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[31] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[1] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[2] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[3] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[4] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[5] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[6] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[7] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[8] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[9] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[11] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[12] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[13] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[14] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[15] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[16] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[17] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[18] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[20] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[21] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[22] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[23] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[24] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[25] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[26] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[27] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[28] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[29] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[30] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[31] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[5] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[6] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[7] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[8] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[9] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[10] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[11] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[12] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[13] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[15] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[20] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[21] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[22] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[23] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[24] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[26] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[27] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[28] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[29] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[30] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[31] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[32] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[33] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[34] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[35] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[36] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[37] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 2.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "vga"
(WW) Warning, couldn't open module vga
(II) UnloadModule: "vga"
(EE) Failed to load module "vga" (module does not exist, 0)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset G33 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[5] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[6] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[7] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[8] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[9] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[10] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[11] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[12] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[13] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[15] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[20] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[21] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[22] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[23] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[24] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[26] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[27] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[28] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[29] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[30] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[31] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[32] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[33] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[34] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[35] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[36] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[37] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[5] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[6] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[7] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[8] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[9] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[10] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[11] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[12] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[13] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[15] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[23] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[24] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[25] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[26] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[27] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[29] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[30] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[31] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[32] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[33] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[34] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[35] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[36] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[37] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[38] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[39] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[40] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
[41] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[42] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default i810 Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) G33
(--) intel(0): Chipset: "G33"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xF3200000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Builtin Default Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1360x768
(II) intel(0): detected 1024 kB GTT.
(II) intel(0): detected 7164 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf3000000 - 0xf30fffff (0x100000) MS[b]
[1] 0 0 0xe0000000 - 0xefffffff (0x10000000) MS[b]
[2] 0 0 0xf3200000 - 0xf327ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xf3100000 - 0xf3103fff (0x4000) MX[b]
[8] -1 0 0xf3104000 - 0xf31047ff (0x800) MX[b]
[9] -1 0 0xf3105000 - 0xf31053ff (0x400) MX[b]
[10] -1 0 0xf2000000 - 0xf2000fff (0x1000) MX[b]
[11] -1 0 0xf3287000 - 0xf32870ff (0x100) MX[b]
[12] -1 0 0xf3286000 - 0xf32867ff (0x800) MX[b]
[13] -1 0 0xf3284000 - 0xf32843ff (0x400) MX[b]
[14] -1 0 0xf3280000 - 0xf3283fff (0x4000) MX[b]
[15] -1 0 0xf3285000 - 0xf32853ff (0x400) MX[b]
[16] -1 0 0xf3000000 - 0xf30fffff (0x100000) MX[b](B)
[17] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[18] -1 0 0xf3200000 - 0xf327ffff (0x80000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[22] 0 0 0x0000e100 - 0x0000e107 (0x8) IS[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[27] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[28] -1 0 0x0000b300 - 0x0000b303 (0x4) IX[b]
[29] -1 0 0x0000b200 - 0x0000b207 (0x8) IX[b]
[30] -1 0 0x0000b100 - 0x0000b103 (0x4) IX[b]
[31] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[32] -1 0 0x00000500 - 0x0000051f (0x20) IX[b]
[33] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[b]
[34] -1 0 0x0000ea00 - 0x0000ea03 (0x4) IX[b]
[35] -1 0 0x0000e900 - 0x0000e907 (0x8) IX[b]
[36] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[b]
[37] -1 0 0x0000e700 - 0x0000e707 (0x8) IX[b]
[38] -1 0 0x0000e500 - 0x0000e51f (0x20) IX[b]
[39] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[b]
[40] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[b]
[41] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[42] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[43] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[b]
[44] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b](B)
[45] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[46] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 109824 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 439292 kB available
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
large DRI memory manager reservation:
(II) intel(0): Allocating 5100 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Increasing the scanline pitch to allow tiling mode (1408 -> 2048).
(II) intel(0): Memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB)
(II) intel(0): 0x00033000-0x00033fff: G33 hw status (4 kB)
(II) intel(0): 0x00040000-0x032b7fff: front buffer (51680 kB)
(II) intel(0): 0x006ff000: end of stolen memory
(II) intel(0): 0x032b8000-0x032c7fff: xaa scratch (64 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10880 kB)
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10880 kB)
(II) intel(0): 0x06000000-0x07ffffff: DRI memory manager (32768 kB)
(II) intel(0): 0x08000000-0x09ffffff: textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xe0040000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): Unable to use TTM-based memory manager with DRM version 1.6
(II) intel(0): [drm] Registers = 0xf3200000
(II) intel(0): [drm] ring buffer = 0xe0000000
(II) intel(0): [drm] init sarea width,height = 1360 x 1360 (pitch 2048)
(II) intel(0): [drm] Mapping front buffer
(II) intel(0): [drm] Front Buffer = 0x2c008000
(II) intel(0): [drm] Back Buffer = 0xe4000000
(II) intel(0): [drm] Depth Buffer = 0xe5000000
(II) intel(0): [drm] textures = 0xe8000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xe0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x006ff000 (pgoffset 1791)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x032b8000 (pgoffset 12984)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x08000000 (pgoffset 32768)
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00010000, overlay GTT PTE
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Set up overlay video
(II) intel(0): [DRI] installation complete
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): direct rendering: Enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 359 x 203
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) evaluating device (<default keyboard>)
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
Oh, I forgot to tell that compiz outputs no error messages.
Also, I find it weird that xorg uses the i810 driver, as I only have the "intel" driver installed.
Last edited by Synthetix (2007-11-14 01:21:15)

hmm dell would only launch X using the intel drivers and I"m having the same problem with compiz fusion that you had. My windows don't update themselves. It's quite frustrating.

Conky won't stay below other windows...

Hellu!
I'm currently using conky with a conkyrc from my Ubuntu laptop which works quite well... Problem is, when Compiz is started, Conky suddently wants to stay on top of all other windows. Restarting conky fixes the problem, but I'd rather not restart conky everytime i login to the system... Anyone know how to fix this?
Also. Is there a way to add conky to compiz' widget-layer and still have it below all other windows? Basically, I want it on the desktop unless i hit a key, which makes it come on top of everything.
Heres my conky configuration:
# Use Xft?
use_xft yes
xftfont DejaVu Sans:size=8
xftalpha 0.8
text_buffer_size 2048
# Update interval in seconds
update_interval 1
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 240 0
maximum_width 240
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_margin 5
# border width
border_width 1
# Default colors and also border colors
default_color white
#default_shade_color black
#default_outline_color white
own_window_colour white
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 5
gap_y 35
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
TEXT
${alignc 35}${font Arial Black:size=26}${time %H:%M}${font}
${alignc}${time %A %d %Y}
SYSTEM ${hr 2}
${voffset 3}${font StyleBats:size=16}q${font}${voffset -5} Uptime: ${alignr}${uptime}
${voffset 3}${font OpenLogos:size=16}B${font}${voffset -5} Kernel: ${alignr}${kernel}
${voffset 3}${font StyleBats:size=16}A${font}${voffset -5} CPU1: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,100}
${voffset 3}${font StyleBats:size=16}A${font}${voffset -5} CPU2: ${cpu cpu2}% ${alignr}${cpubar cpu2 8,100}
${voffset 3}${font StyleBats:size=16}g${font}${voffset -5} RAM: $memperc% ${alignr}${membar 8,100}
${voffset 3}${font StyleBats:size=16}j${font}${voffset -5} SWAP: $swapperc% ${alignr}${swapbar 8,100}
PROCESS ${hr 2}
${font}${top name 1} ${alignr}CPU:${top cpu 1}% MEM:${top mem 1}%
${font}${top name 2} ${alignr}CPU:${top cpu 2}% MEM:${top mem 2}%
${font}${top name 3} ${alignr}CPU:${top cpu 3}% MEM:${top mem 3}%
${font}${top name 4} ${alignr}CPU:${top cpu 4}% MEM:${top mem 4}%
HD ${hr 2}
${voffset 4}${font Pie charts for maps:size=14}7${font} ${voffset -5}Free space:
${voffset 6}${fs_free /}/${fs_size /} ${alignr}${fs_bar 8,100 /}
NETWORK ${hr 2}
${if_existing /proc/net/route wlan0}
${voffset -6}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed wlan0} kb/s ${alignr}${upspeedgraph wlan0 8,100 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed wlan0} kb/s ${alignr}${downspeedgraph wlan0 8,100 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}N${font} Upload: ${alignr}${totalup wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font} Download: ${alignr}${totaldown wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Local Ip: ${alignr}${addr wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Public Ip: ${alignr}${execi 1 ~/.scripts/ip.sh}
${else}${if_existing /proc/net/route eth0}
${voffset -6}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed eth0} kb/s ${alignr}${upspeedgraph eth0 8,100 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed eth0} kb/s ${alignr}${downspeedgraph eth0 8,100 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}N${font} Upload: ${alignr}${totalup eth0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font} Download: ${alignr}${totaldown eth0}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Local Ip: ${alignr}${addr eth0}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Public Ip: ${alignr}${execi 1 ~/.scripts/ip.sh}
${endif}${else}${if_existing /proc/net/route eth1}
${voffset -6}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed eth1} kb/s ${alignr}${upspeedgraph eth1 8,100 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed eth1} kb/s ${alignr}${downspeedgraph eth1 8,100 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}N${font} Upload: ${alignr}${totalup eth1}
${voffset 4}${font PizzaDude Bullets:size=14}T${font} Download: ${alignr}${totaldown eth1}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Local Ip: ${alignr}${addr eth1}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Public Ip: ${alignr}${execi 1 ~/.scripts/ip.sh}
${endif}${else}
${font PizzaDude Bullets:size=14}4${font} Network Unavailable
${endif}

own_window_type override
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
use
own_window_type desktop
and
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
Last edited by initbox (2009-01-10 21:52:05)

Slow ¿GDM?

Hi, again.
I'm not sure when this started to happen but things are:
1. Recently I moved from Catalyst to xf86-video-ati (really don't know whether it's related or not, or even previous to the problem but...).
2. Boot up from GRUB to the login prompt in shell takes the same time as it did fresh installed ~20 seconds.
3. After the login prompt i get a blak screen for 20 seconds, then login prompt in shell again, then black screen one more time and after 5 seconds GDM is there.
4. GDM didn't take so long before.
5. Nothing in /var/log makes me suspect anything but I don't know what I'm looking for so if you need one of them just ask, please.
6. I have compiz-fusion started without fusion-icon, as said in the wiki.
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="es_ES.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave i8k !snd_pcsp !pcspkr)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="pablerkas"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="dhcp"
wlan0="dhcp"
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng preload @hal @fam @wicd @crond @alsa @alunnd !network !dhcdbd !networkmanager !netfs)
# /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
Load "synaptics"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "radeon"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux
c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
# End of file
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
# exec xterm
exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
/usr/share/applications/compiz.desktop:
[Desktop Entry]
Type=Application
Encoding=UTF-8
Name=Compiz
Exec=compiz --sm-disable --ignore-desktop-hints ccp --indirect-rendering
NoDisplay=true
# name of loadable control center module
X-GNOME-WMSettingsModule=compiz
# name we put on the WM spec check window
X-GNOME-WMName=Compiz
Thank you veeery much.
Last edited by Slurp (2009-03-16 20:53:02)

Thanks for your answer.
I tried Slim and disabling compiz but nothing changed.
The xorg was a little hard to make the first time and I cannot make it again, so i just changed some things, but I don't know whether it is still "odd".
#/etc/X11/xorg.conf
Section "ServerLayout"
Identifier "Main Layout"
Screen 0 "Screen0"
EndSection
Section "Module"
Load "synaptics"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
About Catalyst ... ufff... I would have to make a new Xorg and ... ufff... Radeonhd doesn't work for my card.
And about another DE which one would be the less painful? I mean, last time I installed KDE just to see it I had lots of problems with file-program associations and to fix them is a pain in the ass...
And now I see on boot up a message that says something like "/etc/rc.d/functions not found" ... o_O
Last edited by Slurp (2009-03-18 11:26:13)

What should I do with this fusion-icon error??

[mcool@ArchLinux ~]$ fusion-icon
* Detected Session: xfce
* Searching for installed applications...
* Intel detected, exporting: INTEL_BATCH=1
* Using the GTK Interface
Segmentation fault (core dumped)
Last edited by mcool4151 (2013-05-13 09:06:16)

There seems to be an issue with Intel and Compiz. To launch Compiz you have to always enter the following command into a terminal (as stated in the arch wiki).
LIBGL_ALWAYS_INDIRECT=true compiz --replace --sm-disable ccp &
This works for me, however I have no idea how to make it so Compiz auto starts on login. Simply pasting this command into "sessions and startup" doesn't work.
If anyone knows how to set Compiz to auto start with the above command on Xfce4 I would be grateful.
Last edited by FelixPiers (2013-05-17 17:49:53)

Fresh install laptop, going lightweight

well, the linux installs have officially matched teh windows installs over here. This is cool.
i have a P4 laptop, mostly legacy components 256mb memory, 30gb hard drive. I just installed the latest 686 iso. im going to give gnome a try. i just completed the arch install on ext4, the first thing i ran is pacman -Syu gnome. is there anything else i should know about right off the bat, either concerning the fact that its a laptop as far as sytem configuration (i will be looking over this https://wiki.archlinux.org/index.php/Ma … filesystem and , or any first suggestions about recommended DE components or anything that might make my experience ultra cool and blow away my KDE desktop box?
Last edited by wolfdogg (2011-09-19 01:07:28)

where do i find that, not too sure what compiz is, is that resource hungry?
ewaller@odin:~ 1006 %pacman -Ss compiz
community/ccsm 0.8.4-2 (compiz-fusion compiz-fusion-gtk compiz-fusion-kde) [installed]
Compizconfig Settings Manager in Python
community/compiz-bcop 0.8.8-1 [installed]
Compiz option code generator
community/compizconfig-backend-gconf 0.8.8-1 (compiz-fusion-gtk compiz-fusion)
Compizconfig backend for gconf
community/compizconfig-backend-kconfig4 0.8.8-1 (compiz-fusion-kde compiz-fusion)
Compizconfig backend for kconfig4
community/compizconfig-python 0.8.4-2 [installed]
Compizconfig bindings for python
community/compiz-core 0.8.8-2 (compiz compiz-kde compiz-gtk compiz-fusion) [installed]
Composite manager for Aiglx and Xgl
community/compiz-decorator-gtk 0.8.8-2 (compiz compiz-kde compiz-gtk compiz-fusion)
Compiz decorator for GNOME
community/compiz-decorator-kde 0.8.8-2 (compiz compiz-kde compiz-gtk compiz-fusion)
Compiz decorator for KDE
community/compiz-fusion-plugins-extra 0.8.8-1 (compiz-fusion compiz-fusion-gtk compiz-fusion-kde) [installed]
Compiz Fusion Extra plugins
community/compiz-fusion-plugins-main 0.8.8-1 (compiz-fusion compiz-fusion-kde compiz-fusion-gtk) [installed]
Compiz Fusion Main plugins
community/compiz-manager 0.6.0-3
Compiz Fusion Starter Program
community/emerald 0.8.8-1 (compiz-fusion compiz-fusion-kde compiz-fusion-gtk) [installed]
Emerald window decorator
community/emerald-themes 0.6.0-3 (compiz-fusion compiz-fusion-kde compiz-fusion-gtk) [installed]
Themes for emerald
community/fusion-icon 20101021-1 (compiz-fusion compiz-fusion-kde compiz-fusion-gtk) [installed]
Simple tray icon for compiz
community/libcompizconfig 0.8.8-1 [installed]
Compiz configuration system library
ewaller@odin:~ 1007 %
https://wiki.archlinux.org/index.php/Compiz
http://en.wikipedia.org/wiki/Compiz
I am mildly astonished you have not found it yet ! It is eye candy to the extreme, but is amazingly easy on the resources. It runs great with Xfce4. This computer spends 80% of its time in that mode.

[SOLVED] Gnome + xf86-video-ati = Compiz-fusion can't start wo f-i

I know this is not a new issue but... let's try again.
The title is pretty much the situation. I reinstalled the whole system recently and installed Catalyst which worked good except for a delay on maximizing/resizing windows. Yesterday I saw the new about Catalyst going to AUR and all that stuff so I decided to switch to open source drivers. They work pretty good but the wiki-way to start compiz without fusion-icon which used to work with catalyst does not work anymore.
$ cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
Load "synaptics"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "radeon"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
$ cat /usr/share/applications/compiz.desktop
[Desktop Entry]
Type=Application
Encoding=UTF-8
Name=Compiz
Exec=compiz ccp
NoDisplay=true
# name of loadable control center module
X-GNOME-WMSettingsModule=compiz
# name we put on the WM spec check window
X-GNOME-WMName=Compiz
$ gconftool-2 --get /desktop/gnome/session/required_components/windowmanager
compiz
$ fusion-icon
* Detected Session: gnome
* Searching for installed applications...
* No GLX_EXT_texture_from_pixmap with direct rendering context
... present with indirect rendering, exporting: LIBGL_ALWAYS_INDIRECT=1
* Using the GTK Interface
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
* Starting Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp --indirect-rendering
/usr/lib/python2.6/site-packages/FusionIcon/interface_gtk/main.py:214: GtkWarning: Theme directory 24x24/stock of theme hydroxygenPablerkasMod has no size field
gtk.main()
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Thanks in advance
Last edited by Slurp (2009-03-08 19:10:34)

In your compiz.desktop instead of:
Exec=compiz ccp
It should be:
Exec=compiz --sm-disable --ignore-desktop-hints ccp --indirect-rendering
Edit:
If you still have problems after that you need to export LIBGL_ALWAYS_INDIRECT=1, which is what fusion-icon is doing.
Last edited by CursedMonkey (2009-03-04 21:41:03)

Compiz-fusion can't start

I installed compiz-fusion. But it gives me following message when start fusion-icon:
bash-3.2# fusion-icon
* Detected Session: LXDE
* Searching for installed applications...
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
* No GLX_EXT_texture_from_pixmap with direct rendering context
... present with indirect rendering, exporting: LIBGL_ALWAYS_INDIRECT=1
* Using the GTK Interface
Traceback (most recent call last):
File "/usr/bin/fusion-icon", line 58, in <module>
choose_interface(try_first=options.interface)
File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 89, in choose_interface
import_interface(chosen_interface)
File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 35, in import_interface
__import__('FusionIcon.interface_%s' %interface)
File "/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/__init__.py", line 3, in <module>
import main
File "/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py", line 23, in <module>
import gtk
File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 48, in <module>
from gtk import _gtk
AttributeError: 'module' object has no attribute 'CAPI'
Is it python caused this problem? How to solved this problem?
Regards.

Ranguvar:
Thanks for your concern.
My display card is radeon 9600 and pentium m cpu.
I had changed back to the newest version gnome,reinstalled compiz-fusion after removing with -Rs option. Both catalyst 8.11-02 and newest open source ati driver had been tried. Now it is the "No GLX_EXT_texture_from_pixmap" problem:
bash-3.2# fusion-icon
* Detected Session: gnome
* Searching for installed applications...
* No GLX_EXT_texture_from_pixmap with direct rendering context
... present with indirect rendering, exporting: LIBGL_ALWAYS_INDIRECT=1
* Using the GTK Interface
Traceback (most recent call last):
File "/usr/bin/fusion-icon", line 58, in <module>
choose_interface(try_first=options.interface)
File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 89, in choose_interface
import_interface(chosen_interface)
File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 35, in import_interface
__import__('FusionIcon.interface_%s' %interface)
File "/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/__init__.py", line 3, in <module>
import main
File "/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py", line 23, in <module>
import gtk
File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 48, in <module>
from gtk import _gtk
AttributeError: 'module' object has no attribute 'CAPI'
I had loaded compiz-fusion successfully before. But prolem came out after the recent update system.

Compiz on start up

Similar Messages

Maybe you are looking for