[SOLVED] Want to use gnome decorate in Compiz-Fusion

Hello,
I am a convert from Ubuntu. I have succesfully installed Compiz Fusion. However, I don't like the Emerald theme manager. I would like to use the gtk decorator instead. How is that possible ? I am currently running Compiz by start the Fusion-icon
Thanks
Last edited by cdahmedeh (2009-03-14 15:03:27)

There is a package in the community repository that provides this functionality.  I think it's called compiz-decorator-gtk.
And welcome to arch!

Similar Messages

  • [Solved] No sound (using Gnome with Pulseaudio)

    Hello,
    I have an issue with my audio. Since yesterday it has not been working, as in no sound in my headphones
    I updated gnome, cinnamon and linux yesterday. I did not however update pulseaudio or anything else alsa related (as far as I can tell).
    Another possible cause could be switching from cinnamon to gnome which I did yesterday (I don't know when exactly my audio stopped working).
    Other relevant facts:
    -My mic is still working fine
    -Using the Xonar DG sound card
    -Nothing is muted in alsamixer
    -not a hardware issue, working fine in dual boot windows
    Pulse audio in verbose mode suggest that the issue is not pulseaudio (as does pavucontrol's visualization):
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 5.0
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 16327981f21a4906af3310ebf24dab15.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/username/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA NVidia/HDA NVidia.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA NVidia
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA NVidia use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA NVidia
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:0.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "0"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA NVidia"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "10de"
    I: [pulseaudio] sink.c: device.vendor.name = "NVIDIA Corporation"
    I: [pulseaudio] sink.c: device.product.id = "0e0a"
    I: [pulseaudio] sink.c: device.product.name = "GK104 HDMI Audio Controller"
    I: [pulseaudio] sink.c: device.string = "hdmi:0"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "GK104 HDMI Audio Controller Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "Nvidia GPU 40 HDMI/DP"
    I: [pulseaudio] sink.c: alsa.components = "HDA:10de0040,14622843,00100100"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "0"
    I: [pulseaudio] source.c: alsa.card_name = "HDA NVidia"
    I: [pulseaudio] source.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "10de"
    I: [pulseaudio] source.c: device.vendor.name = "NVIDIA Corporation"
    I: [pulseaudio] source.c: device.product.id = "0e0a"
    I: [pulseaudio] source.c: device.product.name = "GK104 HDMI Audio Controller"
    I: [pulseaudio] source.c: device.string = "0"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0 (alsa_card.pci-0000_01_00.1) module loaded.
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/Xonar DG/Xonar DG.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Xonar DG
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import Xonar DG use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card Xonar DG
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround41:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround41:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround50:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround50:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround51:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround51:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.CMI8786.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restored profile 'output:analog-stereo+input:analog-stereo' for card alsa_card.pci-0000_03_07.0.
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_03_07.0.
    I: [pulseaudio] card.c: Created 1 "alsa_card.pci-0000_03_07.0"
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device front:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] sink.c: Created sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "Multichannel"
    I: [pulseaudio] sink.c: alsa.id = "Multichannel"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "0"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] sink.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "13f6"
    I: [pulseaudio] sink.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] sink.c: device.product.id = "8788"
    I: [pulseaudio] sink.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] sink.c: device.string = "front:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "352800"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] sink.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] sink.c: alsa.mixer_name = "CMI8786"
    I: [pulseaudio] sink.c: alsa.components = "CS4245 CMI8786"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "13f6"
    I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] source.c: device.product.id = "8788"
    I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 1.0 fragments of size 352800 bytes (2000.00ms), buffer size is 352800 bytes (2000.00ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -125.50 dB to 0.00 dB.
    I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
    I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-sink.c: Using hardware mute control.
    I: [alsa-sink-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-source.c: Successfully opened device front:1.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] source.c: Created source 2 "alsa_input.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "Multichannel"
    I: [pulseaudio] source.c: alsa.id = "Multichannel"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "13f6"
    I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] source.c: device.product.id = "8788"
    I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] source.c: device.string = "front:1"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "131072"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "131072"
    I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] source.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] source.c: alsa.mixer_name = "CMI8786"
    I: [pulseaudio] source.c: alsa.components = "CS4245 CMI8786"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-source.c: Using 1.0 fragments of size 131072 bytes (743.04ms), buffer size is 131072 bytes (743.04ms)
    I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-source.c: Hardware volume ranges from -12.00 dB to 12.00 dB.
    I: [pulseaudio] alsa-source.c: Fixing base volume to -12.00 dB
    I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-source.c: Using hardware mute control.
    I: [alsa-source-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-source-Multichannel] alsa-source.c: Starting capture.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="1" name="pci-0000_03_07.0" card_name="alsa_card.pci-0000_03_07.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1 (alsa_card.pci-0000_03_07.0) module loaded.
    I: [pulseaudio] module-udev-detect.c: Found 2 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #8; argument: "channels=2").
    I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #9; argument: "").
    I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #11; argument: "").
    I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-gconf" (index: #14; argument: "").
    I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_03_07.0.analog-stereo'.
    I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_03_07.0.analog-stereo'.
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #15; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #16; argument: "").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #18; argument: "").
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #19; argument: "").
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #20; argument: "").
    I: [pulseaudio] client.c: Created 0 "Login Session c1"
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #21; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #22; argument: "").
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #23; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #24; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #25; argument: "").
    I: [pulseaudio] main.c: Daemon startup complete.
    I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
    E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
    I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    I: [pulseaudio] source-output.c: Trying to change sample rate
    I: [pulseaudio] remap.c: Using generic matrix remapping
    I: [pulseaudio] source-output.c: Created output 0 "Peak detect" on alsa_input.pci-0000_03_07.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
    I: [pulseaudio] source-output.c: application.id = "org.gnome.VolumeControl"
    I: [pulseaudio] source-output.c: media.name = "Peak detect"
    I: [pulseaudio] source-output.c: application.name = "GNOME Volume Control Dialog"
    I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
    I: [pulseaudio] source-output.c: native-protocol.version = "29"
    I: [pulseaudio] source-output.c: application.icon_name = "multimedia-volume-control"
    I: [pulseaudio] source-output.c: application.version = "3.12.1"
    I: [pulseaudio] source-output.c: application.process.id = "2090"
    I: [pulseaudio] source-output.c: application.process.user = "username"
    I: [pulseaudio] source-output.c: application.process.host = "gimli"
    I: [pulseaudio] source-output.c: application.process.binary = "gnome-control-center"
    I: [pulseaudio] source-output.c: application.language = "en_US.UTF-8"
    I: [pulseaudio] source-output.c: window.x11.display = ":0.0"
    I: [pulseaudio] source-output.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
    I: [pulseaudio] source-output.c: application.process.session_id = "c1"
    I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
    I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
    I: [alsa-source-Multichannel] alsa-source.c: Increasing minimal latency to 1.00 ms
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
    I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-stereo idle for too long, suspending ...
    I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
    I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
    I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    I: [pulseaudio] sink-input.c: Trying to change sample rate
    I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 48000
    I: [pulseaudio] source.c: Changed sampling rate successfully
    I: [pulseaudio] sink.c: Changed sampling rate successfully
    I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
    I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:test.
    I: [alsa-sink-Multichannel] alsa-sink.c: Trying resume...
    I: [alsa-sink-Multichannel] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [alsa-sink-Multichannel] alsa-util.c: ALSA period wakeups disabled
    I: [alsa-sink-Multichannel] alsa-sink.c: Time scheduling watermark is 18.38ms
    I: [alsa-sink-Multichannel] alsa-sink.c: Resumed successfully...
    I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
    I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
    I: [pulseaudio] remap.c: Using generic matrix remapping
    I: [pulseaudio] sink-input.c: Created input 0 "Front Right" on alsa_output.pci-0000_03_07.0.analog-stereo with sample spec s16le 1ch 48000Hz and channel map front-right
    I: [pulseaudio] sink-input.c: event.id = "audio-channel-front-right"
    I: [pulseaudio] sink-input.c: media.name = "Front Right"
    I: [pulseaudio] sink-input.c: media.role = "test"
    I: [pulseaudio] sink-input.c: media.filename = "/usr/share/sounds/freedesktop/stereo/audio-channel-front-right.oga"
    I: [pulseaudio] sink-input.c: application.name = "libcanberra"
    I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    I: [pulseaudio] sink-input.c: native-protocol.version = "29"
    I: [pulseaudio] sink-input.c: application.id = "org.gnome.VolumeControl"
    I: [pulseaudio] sink-input.c: application.version = "0.30"
    I: [pulseaudio] sink-input.c: application.process.id = "2090"
    I: [pulseaudio] sink-input.c: application.process.user = "username"
    I: [pulseaudio] sink-input.c: application.process.host = "gimli"
    I: [pulseaudio] sink-input.c: application.process.binary = "gnome-control-center"
    I: [pulseaudio] sink-input.c: application.icon_name = "multimedia-volume-control"
    I: [pulseaudio] sink-input.c: application.language = "en_US.UTF-8"
    I: [pulseaudio] sink-input.c: window.x11.display = ":0.0"
    I: [pulseaudio] sink-input.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
    I: [pulseaudio] sink-input.c: application.process.session_id = "c1"
    I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:test"
    I: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    I: [pulseaudio] protocol-native.c: Final latency 3837.50 ms = 1960.00 ms + 2*20.00 ms + 1837.50 ms
    I: [pulseaudio] sink-input.c: Freeing input 0 "Front Right"
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
    I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
    ^CI: [pulseaudio] main.c: Got signal SIGINT.
    I: [pulseaudio] main.c: Exiting.
    I: [pulseaudio] main.c: Daemon shutdown initiated.
    I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #25).
    I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #25).
    I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #24).
    I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #24).
    I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #23).
    I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #23).
    I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #22).
    I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #22).
    I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #21).
    I: [pulseaudio] client.c: Freed 0 "Login Session c1"
    I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #21).
    I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #20).
    I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #20).
    I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #19).
    I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #19).
    I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #18).
    I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #18).
    I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #17).
    I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #17).
    I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #16).
    I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #16).
    I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #15).
    I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #15).
    I: [pulseaudio] module.c: Unloading "module-gconf" (index: #14).
    I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #14).
    I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #13).
    I: [pulseaudio] source-output.c: Freeing output 0 "Peak detect"
    I: [pulseaudio] client.c: Freed 1 "GNOME Volume Control Dialog"
    I: [pulseaudio] client.c: Freed 2 "libcanberra"
    I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #13).
    I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #12).
    I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #12).
    I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #11).
    I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #11).
    I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #10).
    I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #10).
    I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #9).
    I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #9).
    I: [pulseaudio] module.c: Unloading "module-jackdbus-detect" (index: #8).
    I: [pulseaudio] module.c: Unloaded "module-jackdbus-detect" (index: #8).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
    I: [pulseaudio] sink.c: Freeing sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo"
    I: [pulseaudio] source.c: Freeing source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor"
    I: [pulseaudio] source.c: Freeing source 2 "alsa_input.pci-0000_03_07.0.analog-stereo"
    I: [pulseaudio] card.c: Freed 1 "alsa_card.pci-0000_03_07.0"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
    I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
    I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
    I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
    I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    I: [pulseaudio] main.c: Daemon terminated.
    aplay -l:
    card 0: DG [Xonar DG], device 0: Multichannel [Multichannel]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: DG [Xonar DG], device 1: Digital [Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    aplay -L :
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=DG
    Xonar DG, Multichannel
    Default Audio Device
    front:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Front speakers
    surround40:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=DG,DEV=0
    Xonar DG, Multichannel
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=DG,DEV=0
    Xonar DG, Multichannel
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 2
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 3
    HDMI Audio Output
    My best guess at this point is that something(tm) is wrong with alsa. I have no idea how to troubleshoot this though. Any advice?
    Please let me know if anything important is missing.
    Last edited by InfamousBlue (2014-05-02 09:38:49)

    Did you ever have a copy of front channels or a mix of all of them played on the headphone jack with alsa only? I doubt it. If you kill pulseaudio and run following, what channels do you hear from headphones?
    speaker-test -c 8 -t wav -D plughw:DG,0
    This is probably more of a pulseaudio issue, since alsa usually does not copy streams.
    InfamousBlue wrote:I did not however update pulseaudio or anything else alsa related (as far as I can tell).
    Partial upgrades are not supported. There are some remapping examples on the wiki. If you seek a hardware remapping solution try hdajackretask from alsa-tools, it works however for hda compliant cards.
    Last edited by emeres (2014-05-02 07:30:17)

  • Compiz-Fusion unstable (Gnome-ATI)

    Hello.
    I have an absolutely updated Archlinux but Compiz is very unstable. Some weeks ago it was working smoothly. Then came some Xorg, xf86-video-ati and Compiz updates all of a sudden and compiz started to crash very frequently, logging me out to GDM. Then came some more updates and thing has become better but still is crashing. Facts:
    1. Starting Gnome session with Compiz-fusion but without Fusion-icon works for a while. Then, suddenly, X crashes and I get back to GDM.
    2. If I start Gnome with Metacity everything works nice, but as soon as I run compiz-fusion with fusion-icon it logs me out.
    3. No error messages on Xorg.log.
    4. I tried to run Fusion-icon from terminal redirecting the output to a file to see if there is some error message but got no luck... no message at all.
    5. I don't know where to look at for the error, neither know how to know if it's a bug and, in that case, if that's related to gnome, compiz, xorg, xf86-video-ati or what...
    Any information needed just ask, please. Thanks for everything once again, but it seems that I cannot get this working without problems for two weeks in a row, maybe Arch it's too much for my ignorance...

    Your wishes are orders... But there is no (EE), just some (WW)
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux pablerkas 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 3 21:59:04 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    (**) | |-->Device "My Graphics Card"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (**) Option "DontZap" "False"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 8
    (--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xd0000000/268435456, 0xefdf0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD Graphics, ATI Radeon Graphics,
    ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
    ATI Radeon Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000efdf0000
    (II) RADEON(0): MMIO registers at 0x00000000efdf0000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "EnablePageFlip" "on"
    (**) RADEON(0): Option "DMAForXv" "on"
    (**) RADEON(0): Option "AccelDFS" "on"
    (**) RADEON(0): Option "ScalerWidth" "2048"
    (**) RADEON(0): Option "RenderAccel" "on"
    (**) RADEON(0): Option "AccelMethod" "EXA"
    (**) RADEON(0): Option "DRI" "on"
    (**) RADEON(0): Option "EXAVSync" "on"
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
    (WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
    (--) RADEON(0): Linear framebuffer at 0x00000000d0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1028 SubsystemID: 0x2003
    IOBaseAddress: 0xee00
    Filename: BR18652D.bin
    BIOS Bootup Message:
    M54P Dell Key largo A12 DDR2 BU BIOS 432e/396m Channel B
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 432000
    (II) RADEON(0): Default Memory Clock: 396000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (**) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    (**) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1600
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 432.000000, mclk: 396.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=110000; xclk=40000
    (WW) RADEON(0): LVDS Info:
    XRes: 1280, YRes: 800, DotClock: 71110
    HBlank: 160, HOverPlus: 48, HSyncWidth: 32
    VBlank: 23, VOverPlus: 2, VSyncWidth: 6
    (II) RADEON(0): Skipping TV-Out
    (II) RADEON(0): Skipping Component Video
    encoder: 0x15
    encoder: 0xf
    (II) RADEON(0): Output VGA-0 has no monitor section
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): I2C bus "LVDS" initialized.
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_KLDSCP_DAC1
    DDC reg: 0x7e40
    (II) RADEON(0): Port1:
    XRANDR name: LVDS
    Connector: LVDS
    LCD1: INTERNAL_LVTM1
    DDC reg: 0x7e30
    (II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    Dac detection success
    finished output detect: 0
    (II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
    (II) RADEON(0): Year: 2006 Week: 0
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported additional Video Mode:
    (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    (II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
    (WW) RADEON(0): Unknown vendor-specific block f
    (II) RADEON(0): DF056154X3
    (II) RADEON(0): '@PZ °Ùÿ
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004ca3000000000000
    (II) RADEON(0): 00100103802115780a87f594574f8c27
    (II) RADEON(0): 27505400000001010101010101010101
    (II) RADEON(0): 010101010101c71b00a0502017303020
    (II) RADEON(0): 26004bcf100000190000000f00000000
    (II) RADEON(0): 00000000002387026400000000fe0044
    (II) RADEON(0): 463035360331353458330a20000000fe
    (II) RADEON(0): 002740505a81b0d9ff01010a2020009d
    finished output detect: 1
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    Dac detection success
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
    (II) RADEON(0): Year: 2006 Week: 0
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported additional Video Mode:
    (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    (II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
    (WW) RADEON(0): Unknown vendor-specific block f
    (II) RADEON(0): DF056154X3
    (II) RADEON(0): '@PZ °Ùÿ
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004ca3000000000000
    (II) RADEON(0): 00100103802115780a87f594574f8c27
    (II) RADEON(0): 27505400000001010101010101010101
    (II) RADEON(0): 010101010101c71b00a0502017303020
    (II) RADEON(0): 26004bcf100000190000000f00000000
    (II) RADEON(0): 00000000002387026400000000fe0044
    (II) RADEON(0): 463035360331353458330a20000000fe
    (II) RADEON(0): 002740505a81b0d9ff01010a2020009d
    (II) RADEON(0): EDID vendor "SEC", prod id 0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1280x800
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (**) RADEON(0): Using EXA acceleration architecture
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit d0000000 0 0
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x08000000
    (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Allocating from a screen of 131040 kb
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
    (II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
    (II) RADEON(0): Will use 32 kb for PCI GART at offset 0x07ff8000
    (II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
    (II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
    (II) RADEON(0): Will use 55808 kb for textures at offset 0x012c8000
    (II) RADEON(0): Will use 56000 kb for X Server offscreen at offset 0x04948000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xd0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf8712000
    (II) RADEON(0): [pci] ring handle = 0xf8712000
    (II) RADEON(0): [pci] Ring mapped at 0xaf7f0000
    (II) RADEON(0): [pci] Ring contents 0x00000000
    (II) RADEON(0): [pci] ring read ptr handle = 0xf8813000
    (II) RADEON(0): [pci] Ring read ptr mapped at 0xb808a000
    (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
    (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8814000
    (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaf5f0000
    (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
    (II) RADEON(0): [pci] GART texture map handle = 0xf8a14000
    (II) RADEON(0): [pci] GART Texture map mapped at 0xad970000
    (II) RADEON(0): [drm] register handle = 0x2dfbe000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 16
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
    (II) RADEON(0): Setting EXA maxPitchBytes
    (II) RADEON(0): EXA VSync enabled
    (II) RADEON(0): num quad-pipes is 1
    (II) EXA(0): Offscreen pixmap area of 57344000 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (II) UploadToScreen
    (II) DownloadFromScreen
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Set up textured video
    Output CRT1 disable success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output LCD1 disable success
    Mode 1280x800 - 1440 823 10
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    freq: 71110000
    best_freq: 71109890
    best_feedback_div: 719
    best_ref_div: 21
    best_post_div: 13
    (II) RADEON(0): crtc(0) Clock: mode 71110, PLL 71100
    (II) RADEON(0): crtc(0) PLL : refdiv 21, fbdiv 0x2CF(719), pdiv 13
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    Output digital setup success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output LCD1 enable success
    Output CRT1 disable success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) RADEON(0): Option "ForceLowPowerMode" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 331 x 207
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
    (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event7"
    (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
    (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
    (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
    (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
    (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.0
    (**) Option "Device" "/dev/input/event6"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "3"
    (**) Option "TapButton3" "2"
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "es"
    exaCopyDirty: Pending damage region empty!
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    Dac detection success
    (II) RADEON(0): EDID vendor "SEC", prod id 0
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.4 kHz)
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
    (II) RADEON(0): Year: 2006 Week: 0
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported additional Video Mode:
    (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    (II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
    (WW) RADEON(0): Unknown vendor-specific block f
    (II) RADEON(0): DF056154X3
    (II) RADEON(0): '@PZ °Ùÿ
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004ca3000000000000
    (II) RADEON(0): 00100103802115780a87f594574f8c27
    (II) RADEON(0): 27505400000001010101010101010101
    (II) RADEON(0): 010101010101c71b00a0502017303020
    (II) RADEON(0): 26004bcf100000190000000f00000000
    (II) RADEON(0): 00000000002387026400000000fe0044
    (II) RADEON(0): 463035360331353458330a20000000fe
    (II) RADEON(0): 002740505a81b0d9ff01010a2020009d
    (II) RADEON(0): EDID vendor "SEC", prod id 0
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    Dac detection success
    (II) RADEON(0): EDID vendor "SEC", prod id 0
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.4 kHz)
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
    (II) RADEON(0): Year: 2006 Week: 0
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported additional Video Mode:
    (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    (II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
    (WW) RADEON(0): Unknown vendor-specific block f
    (II) RADEON(0): DF056154X3
    (II) RADEON(0): '@PZ °Ùÿ
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004ca3000000000000
    (II) RADEON(0): 00100103802115780a87f594574f8c27
    (II) RADEON(0): 27505400000001010101010101010101
    (II) RADEON(0): 010101010101c71b00a0502017303020
    (II) RADEON(0): 26004bcf100000190000000f00000000
    (II) RADEON(0): 00000000002387026400000000fe0044
    (II) RADEON(0): 463035360331353458330a20000000fe
    (II) RADEON(0): 002740505a81b0d9ff01010a2020009d
    (II) RADEON(0): EDID vendor "SEC", prod id 0
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    Dac detection success
    (II) RADEON(0): EDID vendor "SEC", prod id 0
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.4 kHz)
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
    (II) RADEON(0): Year: 2006 Week: 0
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported additional Video Mode:
    (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    (II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
    (WW) RADEON(0): Unknown vendor-specific block f
    (II) RADEON(0): DF056154X3
    (II) RADEON(0): '@PZ °Ùÿ
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004ca3000000000000
    (II) RADEON(0): 00100103802115780a87f594574f8c27
    (II) RADEON(0): 27505400000001010101010101010101
    (II) RADEON(0): 010101010101c71b00a0502017303020
    (II) RADEON(0): 26004bcf100000190000000f00000000
    (II) RADEON(0): 00000000002387026400000000fe0044
    (II) RADEON(0): 463035360331353458330a20000000fe
    (II) RADEON(0): 002740505a81b0d9ff01010a2020009d
    (II) RADEON(0): EDID vendor "SEC", prod id 0
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output LCD1 enable success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output LCD1 enable success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output LCD1 enable success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output LCD1 enable success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output LCD1 enable success

  • [SOLVED] Gnome + xf86-video-ati = Compiz-fusion can't start wo f-i

    I know this is not a new issue but... let's try again.
    The title is pretty much the situation. I reinstalled the whole system recently and installed Catalyst which worked good except for a delay on maximizing/resizing windows. Yesterday I saw the new about Catalyst going to AUR and all that stuff so I decided to switch to open source drivers. They work pretty good but the wiki-way to start compiz without fusion-icon which used to work with catalyst does not work anymore.
    $ cat /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "synaptics"
    Load "glx"
    Load "dri"
    Load "drm"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
    Option "ColorTiling" "on"
    Option "AccelMethod" "EXA"
    Option "EnablePageFlip" "on"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x800"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    $ cat /usr/share/applications/compiz.desktop
    [Desktop Entry]
    Type=Application
    Encoding=UTF-8
    Name=Compiz
    Exec=compiz ccp
    NoDisplay=true
    # name of loadable control center module
    X-GNOME-WMSettingsModule=compiz
    # name we put on the WM spec check window
    X-GNOME-WMName=Compiz
    $ gconftool-2 --get /desktop/gnome/session/required_components/windowmanager
    compiz
    $ fusion-icon
    * Detected Session: gnome
    * Searching for installed applications...
    * No GLX_EXT_texture_from_pixmap with direct rendering context
    ... present with indirect rendering, exporting: LIBGL_ALWAYS_INDIRECT=1
    * Using the GTK Interface
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    * Starting Compiz
    ... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp --indirect-rendering
    /usr/lib/python2.6/site-packages/FusionIcon/interface_gtk/main.py:214: GtkWarning: Theme directory 24x24/stock of theme hydroxygenPablerkasMod has no size field
    gtk.main()
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Thanks in advance
    Last edited by Slurp (2009-03-08 19:10:34)

    In your compiz.desktop instead of:
    Exec=compiz ccp
    It should be:
    Exec=compiz --sm-disable --ignore-desktop-hints ccp --indirect-rendering
    Edit:
    If you still have problems after that you need to export LIBGL_ALWAYS_INDIRECT=1, which is what fusion-icon is doing.
    Last edited by CursedMonkey (2009-03-04 21:41:03)

  • [SOLVED] Subversion will not use gnome-keyring

    Hi,
    Anyone know how to use gnome-keyring with subversion?  When I run svn up, I get the following warning every time:
    ATTENTION! Your password for authentication realm:
    <https://123.456.789.012:443> Subversion Repository
    can only be stored to disk unencrypted! You are advised to configure
    your system so that Subversion can store passwords encrypted, if
    possible. See the documentation for details.
    You can avoid future appearances of this warning by setting the value
    of the 'store-plaintext-passwords' option to either 'yes' or 'no' in
    '/home/david/.subversion/servers'.
    Store password unencrypted (yes/no)?
    I googled a bit and found that you can use gnome-keyring to store passwords encrypted.  I tried setting "password-stores = gnome-keyring" in ~/.subversion/config, but this had no effect.
    I have the package 'extra/gnome-keyring' installed.  From what I can see Subversion is always compiled with gnome-keyring support.  I also tried starting the gnome-keyring-daemon, since it's not started by default (I don't use GNOME as my WM).  I started it from the command line using 'gnome-keyring-daemon' command.  But this had no effect - subversion acts like it doesn't know gnome-keyring even exists.
    Any idea?
    Cheers,
    David
    Last edited by david00 (2010-03-22 09:45:32)

    I had the same problem.
    When the daemon gets started it prints some environment variables with values to stdout. I think other programs like subversion read these to connect to the daemon.
    Starting the daemon like this:
    export `gnome-keyring-daemon`
    in your .xinitrc or at a comparable place should solve your problem.
    Of course, this only applies if you're not using the gnome desktop environment.

  • I have ipad2. i want to use apple bluetooth keyboard for writing.but autocorrection doesn't work! can i solve this with settings?

    i have ipad2  i want to use apple bluetooth keyboard on writing but auto correction doesn't work! how can i solve this? thank you

    Have a read here How to set up your Apple Wireless Keyboard
    Stefan

  • [SOLVED] 'ata3: EH complete' errors only when using GNOME

    Hello,
    when I use GNOME as my DE, I start to get 'ata3: EH complete' errors on dmesg. ata3 is where my hard drive is connected to. Usually one would get those messages if the hard drive was going to failure, but the hard drive seems to be OK (smartctl and programs like Palimpsest gives no error).
    It seems something related to power management.
    Any ideas? This is a WDC WD2500BEVS-22UST0 hard-drive (250GB 2,5") on an Acer 7720 laptop. The disk controller is 
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    I am using the LTS kernel if that changes anything.
    Thanks!
    Last edited by Renan Birck (2010-09-16 13:32:36)

    This is parameter -W 1 passed to hdparm via pm-tools. (/usr/lib/pm-utils/power.d/harddrive)
    Nothng bad with it. Anyway revise if some parameters are too agressive for your disk, edit values in /etc/pm/power.d/harddrive (new file) based on /usr/lib/pm-utils/power.d/harddrive.

  • [SOLVED]Compiz Fusion doesn't start!

    Hello,
    After an upgrade Compiz Fusion doesn't start. Normally I start Compiz Fusion with the command:
    fusion-icon
    But now it gives on a terminal the following output:
    fusion-icon
    * Detected Session: gnome
    * execution of "which glxinfo" failed
    * Error: glxinfo not installed!
    I searched with Yaourt on "glxinfo", but there is no package called "glxinfo".
    Could someone help?
    Jozef
    Last edited by jozef00 (2009-05-11 16:01:39)

    Hello,
    The problem is solved. Instead of
    fusion-icon
    I use
    compiz-manager
    Thanks to xaiviax for his reply.
    Jozef

  • Correct way of starting compiz fusion on GNOME

    This is actually a really minor issue, but something that has been irritating me for a while.
    I've experimented with two ways of starting compiz fusion, first adding fusion-icon to the session startup list. However, this results in metacity being loaded and then compiz fusion being loaded afterwards, which created this flicker which I don't really like.
    The second way is adding another xsession that sets WINDOW_MANAGER to something else and then starting the gnome session. On Gnome 2.22 this works somewhat. If I set WINDOW_MANAGER to "compiz ccp" everything works fine, except that it doesn't load emerald and doesn't start with loose-bindings (expected). Then I tried setting it to "compiz ccp --loose-bindings"; this caused it to hang at the gnome splash screen for a good 2-3 minutes, also anyting else other than "compiz ccp" caused the same hang. Setting it to fusion-icon, or compiz-manager, also caused the same hang.
    Now on Gnome 2.24, the WINDOW_MANAGER var doesn't seem to do anything anymore, and the only way I can start compiz before the gnome session is to run compiz ccp &, fusion-icon &, etc. before exec gnome-session. This however, causes my screen to go black and hang for about a few minutes before working normally.
    Am I doing something wrong? I want compiz fusion to be used as my window manager instead of metacity, is there no easy way of doing that? or do I have to resort to loading metacity and then replacing it with compiz fusion?
    Thanks.
    --Nan

    nan wrote:
    Also tried a method similiar to this: http://bbs.archlinux.org/viewtopic.php? … 04#p438904 but using fusion-icon instead of dropbox.
    There still seems to be a noticable delay between fusion-icon is loaded and the desktop being usable.
    I'm experiencing the same. I was going insane trying to load compiz INSTEAD of metacity as per http://wiki.archlinux.org/index.php/Com … sion.22.29. Oh well, I guess it can't be done. WIERD.
    The annoying thing about this is that if I start up programs and they start before compiz is loaded, wierd things happen (like buttons missing on the top etc). Also, I can't for the life of me get session-management to work with compiz-fusion and gnome 2.24..
    Last edited by toon (2008-10-26 20:08:09)

  • [SOLVED] Compiz fusion-icon won't run

    Hello,
    I'm new to Arch Linux and I've just installed it on my laptop. I want to run Compiz on XFCE: I tried the methods on the Arch Wiki (https://wiki.archlinux.org/index.php/Co … icon.22.29) on replacing XFWM with Compiz. The second method doesn't work, only the first one works, but I don't want to use that one.
    I've tried the third method, but when I followed the instructions and I rebooted my computer, I've got no window manager at all: I have to manually load Compiz.
    The only thing that works right now is following the third method and also do the first one at together.
    But I just want to do either the second or the third method. Does anyone know how to solve this problem?
    Thank you in advance.
    (Sorry for bad English).
    Last edited by jonasty123dm (2013-02-27 18:46:56)

    ewaller wrote:It is your system, so do as you will.   I really do not recommend running compiz as root.  Enough said.
    Hi, I didn't mean running Compiz as root: I just edited this file: "/etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml" to make Compiz start for all users. I followed the method without the fusion icon this time (https://wiki.archlinux.org/index.php/Co … icon.22.29) and everything works now.
    Thank you very much for the help.
    (P.S.: I don't know how to mark this thread as SOLVED).
    Last edited by jonasty123dm (2013-02-27 13:06:12)

  • I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

    THE SHORTER STORY
    My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
    I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
    In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
    What is the best configuration or set-up to accomplish my above goals?
    Thank you in advance for your assistance!!!
    THE FULL STORY
    I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
    (1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
    (2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
    (3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
    (4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
    (5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
    (6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
    I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
    The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
    I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
    I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
    My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
    However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
    Modem
    Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
    Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
    Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
    Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
    ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
    Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
    Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
    Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
    WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
    Existing Laptops on the Wireless Network Requiring Time Machine Backups
    MacBook Air (11-inch, Mid 2012) OS X 10.8.2
    MacBook Pro (13-inch Mid 2010) OS X 10.8.2
    Other Existing Apple Products (Clients) on the Wireless Network
    iPod Touch (second generation) is model A1288.
    iPad (1st generation)
    Apple TV (3rd generation) - Quantity two (2)

    Thanks Bob Timmons.
    In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
    I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
    Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
    Create a wireless network
    Extend a wireless network
    Off
    Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
    Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
    DHCP and Nat
    DHCP Only
    Off (Bridge Mode)
    Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
    How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
    Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
    Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
    I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
    Extenders / Repeaters / Wirelessly Extending the Wireless Network
    I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
    Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
    Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
    So what is left? Do you have a Plan B for me? Thanks in advance for your help!

  • I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

    Hi,
    When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How  do you want to use this disc', although the DVD was full of data. When opening these 
    lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD  opened well without any problems at all.
    Also, how can the System show to me 'How  do you want to use this disc' , in particular when  a DVD is non rewritable(DVD-R) and also contains data)?
    Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
    However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting  blank lightscribe discs I found that the disc were opened.  Also,
    non lightscribe discs were opened well.
    When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
    Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe  discs are unregonised
    Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
    I have done:
    Press the Windows logo key+R to open the Run dialog box.
    Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
    In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
    When you are prompted to confirm that you want to remove the device, click OK.
    Restart the computer.
    But the same prolbem is existing.
    yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
      mount ISO disc images into it, and not physical discs.
    Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
    NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there  a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
    the second is recognised. 
    Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of  what virutal CloneDrive is enabled or disabled.
    But when cliced on my problem didn't solve,
    A man should convert his anger and sadness into strength to continue living in this life.

    Hi,
    The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
    Notebook PC support
    The number of my computer is : LM610EA#A2N.
    Could anyone please at this splendid forum take some of their precious time
    out to really reply my questions and solve my problems?
    FIRST OF ALL:
    My HP Pavilion Laptop is about 3 years old.
    My
    sister's Dell Inspiron laptop is 3 years old.
    My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
    which is always thrown in dust without caring at all. Also, its battery is
    always inserted even when it is fully charged while the laptop is plugged in to
    the main power supply.
    However, my laptop is either used on only battery, or on plugin. Also, it is
    kept from the dust.
    But, I really found that the battery of the Dell laptop
    still lasts about three and half hours, and there is no problem cooling fan is
    not oproperly preporly.
    I only remember one thing differently done on my laptop battery which is I
    charged it fully, then I stored it without using it for about four months, then
    when I reused it, I found it got worse over time. I.e. first time of using it
    after storing,I found it empty, then I charged it again fully, however, then it
    lasted about 2 hours, then 1 and half hours, next an hour, now it is only
    lasting about 20 minutes without performance. If there is high performance, then
    the computer shuts down suddenly.
    My problem is follows:::
    First: Whenever I inserted any Containing Data OR Data
    CD/DVD-R LightScribe discs, I found that HP optical driver was
    unable to read them. When clicking on the optical disc drive
    'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
    is grayed out)
    Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
    read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
    NOTE: with CD/DVD Player is grayed out)
    Used CD/DVD±R/RW Non-LightScribe disc opens normal:
    Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
    With a CD,DVD)::
    My HP CD/DVD DVD±R/RW specis are::
    Optical Drives
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp
    CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random
    Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R,
    CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
    DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
    DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working
    properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded
    FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id
    1
    Status OK
    Trying to solve the problem,
    I have done these steps in order::
    I tried checking with dignostic ulitiy:
    I have tried Advanced View , this is the file of output data
    diagnostic utility
    LightScribe System Software Settings:
    SOFTWARE\LightScribe\MessageDir
    C:\Program Files (x86)\Common
    Files\LightScribe\
    SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintDialog.exe
    SOFTWARE\LightScribe\LSPrintingDialog
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintingDialog.exe
    SOFTWARE\LightScribe\LsPrintLauncher
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintLauncher.dll
    SOFTWARE\LightScribe\ResourceDir
    C:\Program Files (x86)\Common
    Files\LightScribe\res
    SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintAPI.dll
    SOFTWARE\LightScribe\Update\UpdateShellCommand
    http://www.lightscribe.com/go/downloads/windows
    SOFTWARE\LightScribe\Update\PreviousVersion
    1.18.20.1
    SOFTWARE\LightScribe\Update\CurrentVersion
    1.18.27.10
    SOFTWARE\LightScribe\Update\TrailingVersion
    SYSTEM\CurrentControlSet\Services\LightScribeService\Type
    16
    SYSTEM\CurrentControlSet\Services\LightScribeService\Start
    2
    SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
    0
    SYSTEM\CurrentControlSet\Services\LightScribeService\
    SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
    LightScribeService Direct Disc Labeling
    Service
    SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
    LocalSystem
    SYSTEM\CurrentControlSet\Services\LightScribeService\Description
    Used by the LightScribe software components to support 3rd party disc labeling
    applications using the LightScribe COM Application Programming Interface
    (LSCAPI). This service needs to run for LightScribe direct disc labeling to
    work.
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
    7
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
    IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
    SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
    SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\Winlogon\allocatecdroms
    0
    SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
    SOFTWARE\INTEL\Intel
    Application Accelerator Not detected
    Drives and Media:
    Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
    Imaging Parameter : 114
    I tried running the below command line to fix potential disk issue 'Chkdsk
    /r /f'
    I cleaned the drive, discs, and so on.
    I have uninstalled the all third-party data recording software.
    I have uninstalled the Cyber DVD suite, lightscribe system software which
    came pre-installed with my HP pavilion Notebook.
    I have recovered my system from the Factory Recovery discs.
    I have tried opening all those LightScibe discs not opening on my HP optical
    drive, on a Dell optical drive, and all of them were opened well, although Dell
    optical drive did not have a lightscribe feature at all., nor third party disc
    recording software
    However, the problem is still with opening the discs LIGHT-SCRIBE
    Thus, my questions are:
    How to determine if the drive is corrupted and needs to be replaced with
    another one.
    I think there something needed to be done on the BIOS Of my HP
    laptop[[[A similar problems happened on my Desktop computer's optical
    drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
    My Desktop Computer) ---while my optical drive of my desktop was connected to
    the primary slave IDE, and the HDD was connected to the
    primary master IDE, the optical drive and hard disk are functioning
    well. However, I remember that while burning an image with Nero essential V: 5,
    something went wrong, and then the Optical Drive of My Desktop Computer
    (HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
    BIOS, although it was still shown on the device manager as a
    recognised device. Also, it was listed on my computer, however, when entering a
    disc(blank or with data) into the drive, I found it was not recognised, and it
    opened empty(no files at it), although it contains data. Thus, I decided to boot
    to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
    still shown as installed on BIOS. However, the optical drive was not. Th I tried
    clicking on it on BIOS and then clicking on 'enter' to try to let the device be
    re-recognized. However, that made no difference. I had to take part my computer
    ,and then reconnected the optical drive onto the secondary slave
    IDE , and let HDD connected to the same primary master IDE.
    Then, I found that the problem solved and all discs became being read
    normally. Aslo, optical drive became installed on BIOS]]]
    What is meant with with double Layer Support.
    How much does it cost?
    A man should convert his anger and sadness into strength to continue living in this life.

  • I got my Iphone4 from orange network at uk. Now my contract has finished and I want to use new sim into my Iphone4. How can I do that?

    Hi dear,
    I have a contract Iphone4 mobile from Orange network in UK. My contract has finished on 24/03/2014. During the contract I broke my Iphone4 which was given by orange company. After I broke my Iphone4, I claimed it to my insurance company to get my new Iphone4 and I got a new one.
    I want to use this Iphone4 with my new SIM which is from O2 network in UK. Also, I want to use this Iphone at my country(Bangladesh). I tried to use it with my new sim but my Iphone4 does not support it. Please help me out to solve this problems

    YOu would need to contact Orange and have them unlock your phone.
    ONly the carrier that the phone is locked to is authorized to unlock it.

  • When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can use my ID, which is in Mail, Contacts etc. The ID I get, I can't find, so that I can delete it. What to do?

    When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can replace it with my ID in Mail, contacts etc. The ID I get without wanting it, I can't find anywhere. I have to delete it. How do I solve this problem, anyone?

    My content was obtained through another ID, which popped up earlier. Now this one doesn't pop up, and my current ID doesn't pop up either, but another one. How do you find an ID which is not in the store, and not in Mail, contacts etc. either?
    Or is it possible to write the ID yourself when you want to buy something, not only to have it popped up being unable to be changed?

  • I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

    I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

    This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
    The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
    Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
    I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
    http://apple.com/feedback/macosx.html
    Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Maybe you are looking for

  • Dates in column headers based on passed-in parameters

    I am trying to display a query that views performance data for a specified time range, with one day per column and the day's notation ('MON-DD') in the column header. Instead of giving myself a nightmarish query with a variable number of columns, I a

  • S.M.A.R.T

    i just connect my cruppted external hard disk to my iMac G5 through the USB cable, i got the msg in the finder which is gave me 3 different options: initialize, cancel & Eject. i tried to open the Disk Utility to repair the disk, but the REPAIR DISK

  • Database Adapter Polling problem

    Hi All, The polling option is processing all the rows in a table at a time instead of using polling frequency. I have used an option of update a field (logical delete) where I have initialized unread value='N' and read value='Y'. Now ,the problem is

  • ITouch Classic firmware upgrade - I now have a dead iTouch, help!

    Tried to upgrade the OS etc at recommended by iTunes but whole thing died. Rang Apple support and tried their solution (below) but didnt even get any life on the iTouch. Any suggestions? Many thanks! Apple suggested - create new macbook account with

  • Installing QuickTime SDK on Windows 2000?

    Hi, I'm trying to install the QuickTime SDK 7.3 for Windows (from http://developer.apple.com/quicktime/download/). When I try to install this I get a dialogue box telling me: "QuickTime SDK requires that your computer is running Windows 2000 or Windo