Completely new user id when changing email?

Do you get a completely new user id and consequently lose all post history when updating your e-mail address? (as seems to have happened to me)
Ta,
Trent

trent wrote:
Yeah... too late, I thought it would have been linked - especially since I saw no warnings. No mind I have changed my handle. Was kinda hoping it was just a delay to link my account to existing posts/points. But i think after 5 days it's not going to happen :(. Will just have to do as suggested and bookmark my old handle.Jives giveth.. Jives taketh... Rejoice that Jives has given you the opportunity to start afresh... to build a new reputation using a new email addy and handle... with a fresh flame thrower. Praise be Jives!
<i>PS. What? Think you won't be crazy after 10 years dealing with Jives on OTN?</i>

Similar Messages

  • HT4528 How do I reset my iCloud user name when my email used before is no longer active? Also my iCloud was never verified with my old email on my iPad is I am stuck.

    How do I reset my iCloud user name when my email used before is no longer active? Also my iCloud was never verified with my old email on my iPad is I am stuck.

    Hey Dorekelly,
    Thanks for the question. It sounds like you wish to change the email address associated with your Apple ID and iCloud account. The following resource should guide you through this process:
    Change your Apple ID
    http://support.apple.com/kb/HT5621
    Afterwards, be sure to read about updating the features and services that you use with Apple ID:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Thanks,
    Matt M.

  • Documents that are park in FBV0 do not update with the new user name when

    Hi,
         I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made.  Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
    Requesting you to please suggest what could be the reason.
    Earliest reply will be highly appreciated,
    With regards,
    Rj

    Hi,
        I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
    Regards,
    Rj.

  • How to grant new user permission when the acct is created from application?

    Our application team will randomly create users in DB. But the new user need to have the permission of "execute on DBMS_SNAPSHOT, DBMS_STAT, DBMS_SYSTEM" being granted from sys. We need to grant it automatically after the user is created. I was thinking about using DDL "create" trigger or just DDL database trigger. Once the trigger is fired off, issue the grant statement. We can capture the create even for the user, but got error when running the grant in the trigger or from the procedure called by trigger. My guess is that the "grant" is a DDL and DDL trigger cannot start another DDL statement. I also think about put the insert trigger on the sys.user$. But oracle would not let trigger being created on the sys tables or views.
    What can we do now? The other option, I am wondering if there is a system package that can call external program (like Unix shell script) from the DDL trigger, to let the shell script do the grant, since this may not be considered as the same execution tree. Do we have such package to call from database to the UNIX shell script? Or for such need, do we have any other option?
    Thanks for help!
    Edited by: user5973955 on Oct 6, 2010 3:51 PM

    The application teams do not have the sys permission. If the application has privileges to CREATE USER, it can then issue GRANT
    Change the privileges.
    But they want this being resolved from DBA.DBA did NOT make this problem.
    The flawed application created the problem.
    Alternatively CREATE PROCEDURE that can issue GRANT & have application call this new procedure.

  • Thunderbird release 31.3 messes up auto-complete (suggesting incorrect options) and changes email addresses even once selected. How can we fix this?!?

    Prior to release 31.3, when I compose an email and start typing the first character it would pop up a list of my contacts in alphabetical order, and I could select one, and hit enter to open a new line. Following the update to version 31.3, when I compose an email and start typing the first character, the drop-down list of email addresses are no longer in alphabetical order, such that it provides options that make no sense with the first character I typed. In addition, when I finally find the email address I'm looking for and select it, then I hit enter to open a new line, and it changes the email address I just selected to another contact. How do we fix this issue? I want the old Thunderbird back!!! Or, at least, I want the new version to function correctly. Please help!

    https://support.mozilla.org/en-US/questions/1037642

  • How can I Import CA Certificate into a new user profile when it's created

    I need to deploy a CA Root Certificate to new firefox user profile when it is created in windows. I Seen somewhere that you could place a working copy of cert8.db in %programfiles%\firefox-installation-folder\defaults\profile and this would get added when a new firefox profile is created. However, the profile directory doesn't exist in the defaults folder and when I created it this method still didn't work.
    Is there a way to get firefox to create new profiles with preconfigured Certificates?
    Right now when new users open firefox for first time it is unable to connect to any SSL sites through our proxy server until the user adds the proxies ca certificate or it gets added later via logon script (at next user logon).

    Update... For anyone looking for a similar solution:
    I ended up adding more to my logon script I have it check for a user's mozilla profile first and if not found it will use command line "firefox.exe -createprofile default" to make one. After that I just copy a working cert8.db to that new profile. Then when the user opens firefox for first time, it will detect this new profile, and it will load it along with the correct CA Certs intact...
    Also, for existing profiles my script just uses nss certutil to add my proxy CA Certificate to the users profile cert8db.

  • New User Account and Changing Permissions?

    Yesterday I opened a new user account for each of my kids. I moved and/or imported all their stuff to their respective accounts and all seems fine. Except for one folder... The most important one (of course ;o). It has a big red circle saying "..you don't have access".
    This work was done while he was still using my account. So I have since brought it back to my desktop and all is fine. Am I correct in assuming I need to change permissions on this before he can access his folder on his account? If so.. I've never done this before. Can somebody please be good enough to walk me through this? I can not lose this file. There are no copies anywhere else. Please help!

    There are no copies anywhere else.
    This would be good time to make one, before you do anything else!
    I have since brought it back to my desktop and all is fine. Am I correct in assuming I need to change permissions on this before he can access his folder on his account?
    Rather than trying to change any permissions, my suggestion would be:
    1) Log into your own account and move the folder from your Desktop to your Public folder.
    2) Log into your son's new account, navigate to the Public folder back on your account
    HD>Users>yourname>Public
    and drag the folder from there onto the current (your son's) Desktop.
    This will COPY the folder into the new account rather than move it, and in doing so will correct all the permissions automatically. If the folder is very large, make sure you have enough free disk space for this copy. You can later delete the original from your own Public folder if you wish.

  • How do I add  new user account when clicking on plus sign doesnt work?

    In my iMac g4 with OS 10.3.9 I follow instructions but when I get to clicking on the plus sign to add a new account, nothing happens so I am unable to add a new account. I unlock the lock but it makes no difference. There is only one account which is my admin account. How do I proceed to get a new user account working?

    Since I have upgraded my computer from Panther 10.3.9
    to Tiger 10.4.(11) the preference panels may be a little
    different; but they do much the same things.
    Could be the system needs some routine maintenance
    for the thing to work correctly; ie: repair disk permissions
    and/or use OnyX (from titanium software/Panther version)
    and have it run one time through with all checkbox items
    checked under Automation; and have it restart after these
    are all done. If there is a permissions or other system issue
    behind your inability to set up a second user account, this
    would be a blanket maintenance procedure that should do
    no harm. (But if you try things beyond the basics, it may.)
    At times, I start the computer up in SafeBoot (shift key
    held down at startup) and then run "repair disk permissions"
    then restart the computer normally. Usually before and or
    after software updates and installations of applications.
    This, that, and the other thing. It may need a little help.
    You could (also) try booting the computer up from the Panther
    OSX 10.3.x install disk and run "repair disk" as well as
    "repair disk permissions" from Disk Utility in the menu
    beneath Installer, as seen in Finder once the boot disc
    is running the computer. Be sure to exit the Disk Utility
    and also the Installer; and choose to restart from the
    Mac's own installed system by choosing Startup Disk.
    edit to add: if you clicked in that system preference box
    (plus or minus) and it didn't work, and you also unlocked
    the panel using your admin password; then clicked again
    and chose Options or the plus/minus buttons you should
    have gotten in. If you have never ran any of the routines
    such as OnyX or other similar utility, this may be overdue
    and also takes time. A restart after this may take a wait.
    Hopefully this will help some.

  • CHARM how to add new user status to change document

    Can someone please suggest how to add a new user status to a change document ?
    I am looking into adding status "Pending" to Admin correction SDAD.
    Thank you in advance
    Elena

    Hello,
    Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
    SAP Solution Manager
    -> Scenario-Specific Settings
      -> Change Request Management
       -> Extended Configuration
        -> Change Request Management
         -> Change Transaction
          -> Change Transaction Types
            o Define Status Attributes
    Also activity "Make Settings for Change Transaction Types" in the same path is important.
    Best regards,
    Miguel Ariñ

  • Error Creating New User Accounts when Setting Terminal Services Attribute

    We have just started receiving this error when new users are being created in our domain as part of the new hire process. Does anywhere have any pointers on where to look and what to look for?
    ErrorError
    com.waveset.util.WavesetException: WTSQueryUserConfig() failed - Attribute: 'Terminal Services Home Directory Drive' Error: The specified user does not exist.
    Is this something that would indicate that AD isn't replicating across multiple domain servers yet, and thus when it tries to set this attibute this command isn't finding the account? If that is the case is there a way to have a retry put in?

    May I ask what version of IDM you're running?
    There's a known bug that relates to this functionality. A quick review shows it's a pretty close match (not 100%) to what you described.
    Bug 20728: Setting AD 'Terminal Services Local Home Directory' to null in IdM results in WTSSetUserConfig error
    It's fixed in 8.1.0.3(or later), 8.0.0.10(or later), or 7.1.1.14(or later).
    For the record, the latest IDM patches can be obtained here with valid credentials:
    http://sunsolve.sun.com/show.do?target=patches/zp-Software_Network-Internet_Identity_Manager
    Regards,
    Alex

  • New user prompt when installing recovery image

    I'm deploying an Oobe image of Windows 7 home prem. and also a recovery partition with the same Oobe image.
    When re-installing windows from the recovery partition (starting the recovery from windows) i get promtped to input a name for a new user. This does not happen when applying the image manually from WinPE.
    I know this is not much infomation, but I am not sure what infomations is needed så please ask and I will add it to this post.

    If your image has a staged answer file from sysprep from prior to capture, the reason would be because setup.exe ignores it. In order to get Setup.exe to install an image using an answer file, you'll need to customize windowsRE. See the following link:
    http://technet.microsoft.com/en-us/library/dd744576%28WS.10%29.aspx
    You can add your custom tool to run setup.exe with the /unattend switch.

  • SU3 Users unable to change email address...

    We are currently using CUA and I have allowed users to modify all profile information including the Internet Mail setting in SCUM; however, when we go to maintain own data (SU3) the email address cannot be modified????  I have searched all over for information regarding this and there seems to be nothing available.  Does anyone know anything about this?  How can I enable my users to change their email address when necesssary?

    > Does anyone know anything about this? 
    See [SAP Note 136186|https://service.sap.com/sap/support/notes/136186]. The ability to maintain this for your own user is intended for transaction SU3 anymore. It does not work with SAP_ALL either.
    > How can I enable my users to change their email address when necesssary?
    Either the administrator (or equivalent) should maintain this, or you will need to write your own little application which makes it possible for a user to maintain their own address only (and possibly do some validations on it - such as the address not already being in use, and from the correct domain, etc).
    Cheers,
    Julius

  • New style created when changing font size

    Whenever I highlight some text and change the font size in
    the property inspector, a new style gets created and the text in
    the code gets surrounded by <span
    class="style1"></span>
    I do not want this behavior. I just want the text to be
    surround by <font> tags. Otherwise I have to make sure this
    unwanted style gets put into the style sheet.
    help?

    > So if the body of my div called content is 10pt by
    default
    One should never use points on the web. Points are intended
    for use on
    printed output, not on pixel based screens.
    > but I want to change one line to 14pt, i would
    > highlight the line and then click the new css rule
    button and then create
    > a
    > class called 14pt?
    It depends very much on precisely what you mean in the above.
    I will assume
    that when you say 'one line' you mean 'one paragraph'. to do
    that, you
    would create a rule like this -
    #content p.special { font-size:16px; }
    and then apply the 'special' class to the paragraph in
    question by selecting
    it with the tag selector, right clicking to get the context
    menu, and using
    "Set class to -> special".
    Or, you could click in the paragraph tag in question and use
    the 'Style'
    selector on the Property inspector to select "special".
    If, instead, you meant one line within a paragraph, then you
    would have to
    select that text, and surround it with a span tag (using
    Ctrl-t). Apply the
    'special' class to the span tag, and adjust your rule like
    this -
    #content span.special { font-size:16px; }
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Johnny the boy" <[email protected]> wrote
    in message
    news:foqbsv$nkf$[email protected]..
    >I am a confused.
    >
    > You say for me to use CSS rules instead. So if the body
    of my div called
    > content is 10pt by default but I want to change one line
    to 14pt, i would
    > highlight the line and then click the new css rule
    button and then create
    > a
    > class called 14pt?
    >
    >
    >

  • New outputs generated when changing logical system in output master record

    Hi!
    We are sending documents from ECC 5 to a legacy system via XI/PI. We are about to move from an old XI installation to a new PI installation. The output record used (for example in a billing document) is set up based on logical system. When moving from the old to the new platform, we need to change the output records from the old logical syste to the new logical system. However this leads to generation of new outputs in all billing docs when opened in change mode. This goes also for billing docs where we already generated outputs via lthe old logical system in the past. Is there any solution to prevent the automatic generation of outputs for documents where the condition type already was successfully processed (as it works when the logical system is not changed)?
    Best regards
    /Björn

    Normally the same output is not supposed to be generated, unless 'Multiple issuing' checkbox is checked in the output type configuration.
    Also you can probably add a requirement in the output determination procedure and check if output record already exists. Take a look at the standard 'Reprint' routine, kind of the opposite is needed in this case.

  • Create New User Script and Change Home Dir

    I am working on creating a portable user for my usb flash drive so that I can take my desktop anywhere. I was wondering if there was a way that I could make a shell script to:
    1. Create a user account named acnt with the password pswd
    2. Change the NetInfo link of the accounts home directory to /Volumes/Users/User/acount
    I know how to do this in gui, but I would like a more stream lined aproach to doing this. Thank you.

    Dear Dominic,
    There are a number of ways to do this deppending on exactly what you want to do.
    The easy way is to create a file called .profile. .profile will change directories when you login. But this only works as far as terminal login is concerned. To do this type.
    cat>.profile
    cd /Volumes/Users/User/account
    <control D>
    Another way to do this is to use netinfo to adjust the values in the netinfor equivalent of /etc/password. You just set the home directory to where ever you want to login. But as I understand it, This has problems if you try to use Micro$oft software. I have NOT tried this, I just recall seeing a message to this effect in this fine forum.
    I am on the road, so I do NOT have my library and note books. If you need more details on how to use netinfo, just post more questions. Someone else will figure out the details or I will see them when I return to my notes and library.
    Your humble unix geek,
    Kurt

Maybe you are looking for