Completeness indicator of an asset missing

Dear FI-AA experts,
We are on 46C and have a problem with the asset module. We have assigned the cost center in the time-dependent tab as a required field. Yet we are able to save and post to an asset that does not have a cost center assigned.
Now I found information about a completeness indicator for assets and that you can even have SAP send an email to the correct people to update the incomplete asset(s). But I cannot find anywhere how to set this functionality up.

hi,
look here:http://help.sap.com/saphelp_47x200/helpdata/en/4f/71ec9a448011d189f00000e81ddfac/frameset.htm
and transaction AUVA
-i've just switch kostl to obligatory
and i cannot save without filling cost centre???!!!
regards
Andreas

Similar Messages

Delivery completed indicator is not tick on generic article

Hello Expert,
I create a normal purchase order with generic article and variants.
Then, I do goods receipt with full quantity.
Delivery completed indicator is automatic set 'X' on variant items.
But with generic article, Delivery completed indicator is not set 'X'.
Do I miss any configuration ?
Please help me !
Regards,
Minh

Hi Minh,
as far as I know, this is a normal system behaviour and not an error or missing configuration.
The generic article in the goods receipt has a statistical character. No goods receipt can take place for the generic article. The goods receipt only takes place for the variants of the generic article and so the delivery completed indicator only gets set for the variants and not for the generic article.
Hope it helps.
Regards
Tobias

PO delivery completed indicator

Hi All
I notice that some of my po shows the DCI ticked once the delivery gets completed.but some don't get ticked even the delivery gets completed.Whats missing here?Your input will be appreciated.

Hi ,
From your message it seems that the automatic DCI is not set for all the cases.Please check if it so happens for some specific Plant .If so check whether auto DCI is not ticked against that specific Plant .For this go to Spro-MM-Inventory Management & Physical Inventory- Goods Receipt- Set Delivery Completed Indicator . Here check whether all Plants are checked or not.
Dhruba

VERSION "completed" Indicator not restricting further GR and IR of PO

Dear SAP Gurus,
(Sorry, re-creating the Post as the earlier one was created by other user and is closed and i could not assign any points for valuable answers)
In my case the Version management is behaving in a strange manner,
I have created a PO value 1000 unit, and got it released,
now change the value to 2000 it asks for version management i fill the Reason and Text field at Version Management TAB, the system is not asking me to Mark the Version completed indicator ( it is not a mandatory field)
but my biggest issue is even though the Version Completed Indicator is not Ticked the PO could be used for subsequent process,
there can be GR made for this PO, and also Invoice made for the same PO,
system is allowing further processing of the PO where VERSION "completed" Indicator is not ticked.
Please guide if there is any Config to restrict the PO where VERSION completed Indicator is not ticked from going to GR and IR,
( as per the previous posts i also feel making VERSION completed Indicator as mandatory field is not a best Practice, as it will cause new version for small changes in PO)
Thanks and Regards
S Kumar

Hello,
Thanks for ur reply,
Yes we have release stratergy implemented, and our release is also not reset until we tick the version Completed Indicator,
This is really making the system vulnerable as people can make any changes to Qty and Value and neither the system is asking for New version nor resetting the existing Release,
and people can use the PO for Making GR and IR as well, which is not acceptable.
Please guide if any Config is missing to check the same,
Thanks and Regards,
S Kumar

Delivery Completed Indicator - Open PO Quantity Issue

Hi All,
I have an issue relating to our Open Purchase Order Report. I have some POs which are appearing on the report eventhough they are marked, 'Delivery Complete' ie NOT open. The example of a PO is where the PO Quantity is 100 and the Goods Receipt is 99. The user knows that there will be no further deliveries and therefore marks the PO 'Delivery Complete'
In the Extractor to BI we have extracted this field ELIKZ 'Delivery Completed Indicator'. The structure of our datamodel is
PSA -> DSO (Write Optimised DSO) -> Cube
We calculate the Open PO Qty by taking 'PO Qty' minus 'Goods Receipt Quantity' I have checked the example PO in the cube & DSO. I can see that for the infoobject 'Delivery Complete Indicator' that it has been marked 'X' but only on the records relating to the Goods Receipt for this PO. The original PO record is added to the cube eg on 1st Jan and then the Goods Receipt record, including the delivery complete indicator is added to the cube on 31st Jan, but the original record is not updated by this indicator. Therefore at the moment I cannot use this to filter out records in my query. See below how it looks in the Cube;
Created Date - PO No - PO Line - Del Complete Indicator - PO QTy - Goods Receipt Qty
01.01.2011 123 10 (Blank) 100
31.01.2011 123 10 X 99
What should I do? How have you created this report?
Just to let you know I have already read the post Delivery Completed Indicator(ELIKZ:0COMPL_DEL) in 2LIS_02_SCL
Many thanks for your help,
Michelle

Hi Kalyan,
Thanks very much for your message,
In my case if the Order Qty is not equal to receipted this does not always mean that it is open. Sometimes the receipted quantity can be over or under (not equal) and the PO can be closed. What do you mean by confirmed quanity? Also, this is a Purchase Order report not a Sales report.
You have said...
"Then I would suggest to still keep the condition on the Net ord qty and Net confirmed qty and exclude the del compl indicator as X and also the status as open "
I don't understand how this will work. My issue is that the indicator is not on all the records of a PO only the receipted records.
Can you help again please?
Many thanks
Michelle

Deliver completed indicator is not getting updated in the PO item Overview

Hi Gurus,
We have the PO with quantity of 10 and it has been GR/IR, but the Delivery completed indicator is not getting updated (Checked).
The deliver completed indicator is selected in the config of t-code OMCD.
Also there is no tolerance limit is maintained.
Could you please suggest us why the indicator is not getting updating.
Thanks & Regards,
Sada

Hi check follwoing
1. Set Delivery complete indicator at plant leve
spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
2. Control field selection for MIGO to disable users from changing it.
spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
and chek this link
["Delivery Completed" Indicator
Regards
Kailas Ugale

Delivery completed indicator

Hello Friends,
my open order quantity: 100 (In Purchase Order)
i posted 105 quantity received (10% OVERDELIVERY) at MIGO.
I want to post now 5 more to the same open item ofcourse with different material document.

i have manuallly changed the PO With delivery completion indicator unchecked...still is not coming.
JUST wanted to know is there any possibility to post the remainng 5 quantity
And if not, how do u guys suggest to post the remaining quantity within the overdelivery tolerance (10%).
Edited by: Narendar konakanchi on Jul 20, 2009 9:16 AM

Delivery Completed indicator is automatically set in MB31

Dear SAP Gurus,
I have an issue for which I need you help.
In my scenario, we are manufacturing co-products. The actual produced qty of each of the co-products may vary from the ratio which is specified in the BOM. Hence, I have set the "unlimited overdelivery allowed" indicator in WS view for all my co-products.
Further, the process order is created for the entire month. Comfirmations are carried out on a day-to-day basis.
The system works perfectly till around 25th of the month. While doing GR in MB31for 26th of the month, I face a peculiar problem.
For one of the co-products, the received qty exceeds the order qty. Since "unlimited overdelivery allowed" indicator has been set in the Material Master for this co-product, the system allows me to post the excess GR qty. This is fine. However, it is setting the Delivery Completed Indicator on its own. I then manually remove the indicator and post the GR document. But the system still sets the delivery completed indicator for the co-product item on its own in the Process order.
Even if I remove the indicator in the Process order, the system doesn't propose the co-product item while doing GR from 27th onwards.
Please help me in resolving this issue.
Thanks!
Nitin

Hi Hiren
Thanks for the reply.
If I make the change as suggested by you, then the GR from Purchase orders would also be affected.
Is it possible to control the setting of this indicator on a movement type level? If this is so, then I can create a new movt type and use it for production GR .
Please revert.
Regards,
Ntiin

DELIVERY COMPLETED indicator for Services Purchase Order

hello experts,
i'm working in SAP with R3 4.7 for developing funtion / BAPI for a mobile web application for services purchase order.
i have a big problem:
is it possibile to set the DELIVERY COMPLETED indicator (<i>ELIKZ</i>) in services purchase order via BAPI or Function Module?
<i>I'm working with BAPI_PO_CHANGE but and i succeded with material PURCHASE ORDER but not with SERVICES PURCHASE ORDER</i>.
can anyone help me?
thanks in advance,
Eliana

For material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant

"Delivery Completed" Indicator in Goods Receipt

Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
Currently we are not able to check the Delivery Completed Indicator as it is not in editable mode.
Is there any issue if we enable the Check Box on Goods Receipt Screen. If no, how can we enable the Check Box.
Please guide.
Regards,

Hi
This is handled by the system automatically. you can change only in purchase order.
Refer SAP note 1093582 for more info
About delivery completed indicator functionality
The purchase order item is considered closed, even though the total
quantity may not have been delivered.
o Although a further delivery is not expected, it is still possible.
o At the time of the next goods receipt, the system suggests the item
as unselected.
o The purchase order item can be deleted, even if the total quantity
was not delivered.
Although the "delivery completed" indicator is not set, a purchase order
item is still considered closed if the full quantity has been delivered. In
this case, the "delivery completed indicator" is not required.
In Customizing for Inventory Management/Goods Receipt/Set Delivery
Completed Indicator, you can define at plant level that the "delivery
completed indicator" is set automatically in the order if:
o the total quantity was delivered
o the underdelivery or overdelivery lies within the tolerances
Hope it helps
Thanks/karthik

Delivery completed indicator for Service purchase order item

Want to check the PO item for services already delivery completed.
Field EKPO-ELIKZ (delivery completed indicator) is for material line item, is there a equavalent field for Service line item?
What field /how to to check for a service line item in Purchase order already delivery completed ?

For material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant

"delivery completed" indicator in GR

hi
I have created a PO for 100 nos.
I am now receiving 80 nos and then selecting the "delivery completed" indicator in GR screen for that PO.
Still system is allowing to receive remaining 20 nos .
How to prevent system once delivery completed indicator is set?
rgds
sara

Hi,
It is the correct system behaviour, It is programmed like this only and is standard system behavior.
As proposed by sap:
To stop the system from proposing a quantity in Transactions MB01 or MIGO and to prevent a GR posting, you can proceed as follows: ( choose any of these)
1. Reduce the purchase order quantity to the previous GR quantity.
2. Block the purchase order item.
(ME22N: Block pushbutton; ME22 Menu -> Edit -> Block)
3.Fill the date field for the 'Latest Possible Goods Receipt' (LEWED) in the purchase order item. If you do this and you enter a GR document after this date, the system issues message M7163, which you must set as an error message in Customizing.
I propose for the 3rd one.
Regards
Rajesh

Delivery completed indicator not working..

HI SAP expers,
some purchase orders not getting chick mark of Delivery completed indicator ater receiving goods
i have PO with 100 qty . then GR 100 qty . but its not taking in the purchas eorder
Delivery completed indicator not check automaticalley. i did all the configuration in spro-mm-inventory-GR-indi extt...
most of th ePO or getting but some POs or not getting.. is there any settings behind MATERIAL MASTER or any .?
Regards,
Anthyodaya.

Try the following config..
1. Set Delivery complete indicator at plat leve
spro - mm --inventory mgmt -
Goods receipt -
Set delivery complete indicator
2. COntrol field selection for MIGO to disable users from changing it.
spro --> Materials Mgmt --> Inventory Mgmt --> Settings for enjoy Transaction --> Field Selection for MIGO
set field : "Del.Completed" Ind. GOITEM-MIGO_ELIKZ to Display

Delivery Completed Indicator for Services

Hi Guys
In PO's, in the delivery tab, the Delivery Completed Indicator appears only for Stock PO's. Is it possible to make the Delivery Completed Indicator appear for non stock PO's as well, I mean for services?
Thanks

Hi,
It is not possible to setup Delivery Completed Indicator For Services Purchase orders or Non stock Items.
Reg,
Ashok
Rewards welcome.

Delivery completed" indicator cannot be set for item 00001

Hi all,
I have done a inter company stock transfer order , with respect to that Order I made Outbound delivery and posted GR with respect to outbound delivery. I have done MIRO for PO for all the Item ,
Now I need to return some material to supplying plant for some reason, I tried to make GR (MIGO) against the same outbound delivery with movement type 122. the document is posted but when I tried to make complete delivery indicator it does not allow me to do so .
it says me
Delivery completed" indicator cannot be set for item 00001
   Message no. 06 848
Diagnosis
   You have set the "delivery completed" indicator for a stock transfer item.
system Response
   You can only set the "delivery completed" indicator in stock transfer items if
   o   the sum of the goods issue quantities in the supplying plant equal the sum of the goods receipt    quantities in the receiving plant.
   o   the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Regards,
Dhilipan.

I dont think you need to set "delivery completed" indicatory while returning from one plant to another.
For example : You ordered 100 qty. and you are receving only 80 Qty. and you don't expect any receipts anymore. in this case you want to close the open purchase order with delivery completed indicator.
But while returning to vendor or to another plant you are not referring the P.O directly and hence you dont need "delivery completed indicator'

Completeness indicator of an asset missing

Similar Messages

Maybe you are looking for