Component for netwowrk activity

Hi all,
When we add a component to the activity in the TAB assignment we have fields assembly, BOM category, Main assembly, MAin assembly cat and fixed key date.
can any one help out to understand where the above fields are being pulled from and what significance they have.
reg. sam

Hi Amit,
I have checked out the BOM also but havent found any details regarding assembly and may be thats the reason i have no assembly data flowing in to the project. Correct me if i am wrong.
Thus i want to know how do we get these details at the BOM level so that i can see those flowing into the project.
reg.sam

Similar Messages

Req date for an activity based on planned delivery time of component

Hi Experts
I wish to create activities for purchase and install an equipment.
The procurement activity is assigned with the component.
the planned delivery time is specifed (ex: 100 days)
Based on this value, can i get calculated the requirement date for the activity (Ex: today+100days) in stead of manual specification of date for the corresponding activity?
warm regards
ramSiva

Hi Ahmed
Thanks for your response. This seems to be good feature.
However, i could not get the date corrected for my activity after applying this function.
I have created an activity with normal duration 1day. For the same activity, i have assigned a compnent which has 100days planned del time.
Then i have used 'Transfer Del time --> duration'. But no change.
Could you suggest me right approach?
warm regards
ramSiva

Creation of service for Automated Activity

Hi All
I am new to BPM. I have done some process of human activity with help of some tutorials. It was working fine.
I am following this [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/501bd56f-a5a6-2b10-4fbf-a61a64055fe4] link.
I am struck in page No.16.
I created Web Dyn Pro Component and it is for Human activity.
Now I would like to create a service for automated activity from the scrach.
I don't know in which perspective it has to create. But It will be good if it is a CAF Application.
Can anyone suggest a link for step by step process to create a service for automated activity.
Regards,
Nithya
Edited by: Nithya on Jan 29, 2009 10:20 AM

Hi Nithya,
Yes , u can use Caf Application for Automated Activity .
Refer this doc for Automate Activity .
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-process-management/business-process-modeling/creating%20bpm%20process%20with%20human%20and%20automated%20activities.pdf]
u can create composite application in composite Application perspective.
Thanks and regards
Edited by: Fazal Ahamed on Jan 29, 2009 12:15 PM

EP 7 systems in Solution Manager 7 for EWA activation

Dear Expert,
Greetings from Partha.
I need to include our EP 7 systems in Solution Manager 7 for EWA activation. Current lanscape scenario
Solution Manger 7.00 Installed
EP 7.00 Installed
No central SLD configured and all the system have local SLD.
1. As per the installtion guide & SAP notes we need to install
a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
b> Diagnostics Agent in every manged system(s).
For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
--> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
--> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
--> <choose operating system of managed>
Our Solution Manager 7 is already installed and @SPS 17. My question is
1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
If it is different then kindly let me know what are the DVDs to be downloaded and from where?
2. In our Managed System SMD installtion we have decided for
--> Installation Strategy as Direct Solution Manager Registration
But what strategy we should take for SMD installation on Sol Man 7 that is
Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
Help will be appreciated.
Regards,
Partha

1. As per the installtion guide & SAP notes we need to install
a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
b> Diagnostics Agent in every manged system(s).
For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
--> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
--> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
--> <choose operating system of managed>
Our Solution Manager 7 is already installed and @SPS 17. My question is
1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
If it is different then kindly let me know what are the DVDs to be downloaded and from where?
Check the pdf attached in note 1234387 - Inst. 7.1 EhP1 - Diagnostics Agent installation
If you have SP17, you must follow note 1357812 and install Diagnostics Agent 7.01 SR1
2. In our Managed System SMD installtion we have decided for
--> Installation Strategy as Direct Solution Manager Registration
But what strategy we should take for SMD installation on Sol Man 7 that is
Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
It doesn't matter what strategy you'll decide. You could decide Direct Solution Manager registration
3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
As you have solution Manager SP17, you can't install Saphostagent 7.11 and for this reason you can't use SAphostagent.
Agent 7.01 => No Saphostagent
Agent 7.11 => Must install saphostagent
Agent 7.20 => Already have SAPhostagent installed

CN01 assign Material Component to internal activity

Hello gurus;
In transaction CN01 / CN02 can I assign only one Material Component to internal activity without Bill of Material (BOM)?
It is possible? How can i do?
Best regards,
Mariano

Virendra;
Thanks for your response.
I saw the SAP Help portal in [http://help.sap.com/saphelp_46c/helpdata/es/4c/227a7746e611d189470000e829fbbd/frameset.htm]
and I must use a Bill of Material to assign material component. There is no other choice
This is the point where I disagree with SAP, cause the client says that they use Operational Networks, cause it's more simple to assign components to activities.
Best regards.
Mariano

No price could be determined for internal activity LABOUR 0000005006

No price could be determined for internal activity LABOUR 0000005006
Costs of cost element 7500001 cannot be assigned to any cost component
Message no. CK578
Diagnosis
In preliminary order costing or a confirmation, costs for cost element 7500001 were calculated that could not be assigned to any cost component of cost component structure 01.
These costs are from the usage of an internal activity (activity type SETUP) for cost center WORKCENTER.
System Response
The costs will be treated as fully relevant to stock valuation, and debit the order and credit the cost center with the full amount when a confirmation is entered.
Procedure
If necessary, assign cost element 7500001 to a cost component in cost component structure 01.

Dear,
You need to check this calling your cost component structure using OKTZ.Your Cost Element must be assigned to one of the components.
Please closed your previous thread also by assigning relevant points.
Regards,
R.Brahmankar

Error CK 694 No structure could be determined for internal activity

Hi everybody
When I do confirmation, I have an error like this: CK 694 No structure could be determined for internal activity
In KP26, I defined plan price for Exactly Cost center and activity, Price indication is 3.
In costing variance
In OPL1, Actual Cost for Activity I choose 1. Plan Price...
In OKTZ, I define Cost Element in Cost Component Structure
I don't use Activity Group.
I don't know how to fix this error. Does anybody help me ? Please
Thanks.
QuangDD

Dear,
CK11N check the cost component structure for this material
Check whether secondary cost element is assined to that activity.If it is assigned then check cost component structure in IMG where that secondary cost element is assigned or not.
Please refer this thread also,
PRODUCT COSTING ERROR -CK11N
Regards,
R.Brahmankar

Re: Difference between switcher component and router activity

Hi all,
Here i want to know the difference between switcher component and router activity.
Can anybody give the difference between them or suggest any blog for this.
Thanks,
Syam

<af:switcher> component is an ADF Faces component. You can use it within (the source of) a JSF page or fragment to include a particular group of other JSF components depending on the switcher expression's value.
Router activity is not a JSF component, i.e. you cannot use it within a JSF page of fragment. It is an ADF taskflow activity. You can use it as an activity within an ADF Taskflow to route transitions between some other activities in the taskflow depending on the router's expression.
Dimitar

Error: "Component is not active" but component is active

Hi Experts,
I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
"Component XXX_BDB is not active"
But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
Component XXX_BDB can't be generated because of errors: see long text.
(Message no. SWDP_WB_TOOL100)
According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
I have checked this thread [Problems when activating ComponentController |Problems when activating ComponentController; without any effect....
Does someone have any ideas?
Thanks in advance,
Tan

Hi Thomas,
where can I check the generation load limit?
I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
And what about the fact that both applications are running on the source system?
Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
Thanks
Edited by: Tan Yildiz on May 4, 2011 9:26 AM

I want to open excel spread sheets make additions and export back to pc users. Is numbers suitable for this activity?

I want to open excel spread sheets make additions and export back to pc users. Is numbers suitable for this activity? I am using a MACBook Air

just read this in an other answer:
Pages can open docx files, Numbers can open xlsx files. Each can export to can export .doc or .xls to the newest Word or Excel format.respectvely, but not to the more recent .docx or .xlsx.
Translation is not perfect in either direction. Numbers and Excel handle some similar features (eg. pop-up menus vs data validation) differently, and the translator cannot translate from one implementation to the other.
If much of your work is going to be transferred between your machine and Windows machines running either MS Excel or MS Word, with editing taking place at both ends of the tunnel, then you'll probably be better off with Office, or one of the Office clones on the Mac end.

ICal doesn't show all text for the activity

When I updated to iCal version 8.0 i noticed that when I am in week-view, iCal doesn't show all the text for an activity, although there is plenty of room. For example I have a lecture from 9 am - 4 pm and in the activity I put down all the things I have to do, but it only shows the first line for my activity. I need to drag the box or double click on it to see all the text. Can I change this?

Gabriella,
Sometimes making the Calendar window bigger, or using full screen allows additional text to be displayed.
View>"Make Text Smaller" is also an option for those with Eagle Eyes.

Memory could not be allocated for the activation process. Please close all applications and try agai

I have just had a Windows XP failure and took the opportunity to replace with Windows 7. After I reinstalled PhotoShop CS(1) the message "Memory could not be allocated for the activation process. Please close all applications and try again" is shown and forces PhotoShop to close. I have 4Gb of Ram installed and a total of about 10Gb of Page File space on three partitions of a 500Gb HDD. The system is not heavily loaded! However, I cannot access Photoshop to check scratch disk allocation. How to fix???
Back to top

Yes, there are many forums, and it can be confusing. Your question has the best chance of being answered if it is in the proper place. I think it is there now.
Pattie
http://forums.adobe.com/message/5092533#5092533 is your post address
Download and installation forum:
http://forums.adobe.com/community/download_install_setup

Memory could not be allocated for the activation process. Please close all applications and tr again

Hello,
Just purchased a new laptop:
Intel Core 2 quad
4gb memory
1000 HDD
Photoshop CS 8.0 disc dead/scratched/unreadable. So I copied my Adobe folder from my Program Files Folder on my PC and pasted on laptop. When I try and run PS I get the error message "Memory could not be allocated for the activation process. Please close all applications and try again". Which I do then Photoshop closes.
Can anyone help (in layman terms please)?

Not really. You are essentially FUBARd. Without a proper install, there is usually no way on to get the licensing stuff working. You might be able to get there by installing any other CS product, so PS could latch on to the licensing system that would be already in place, but otherwise it's a lost cause. Simply copying over the executables is normally not enough. I will admit though, that I skipped CS, so there may be some tool somewhere that I don't know about can do this post facto...
Mylenium

Memory Could Not Be Allocated For the Activation of PhotoShop

CS2 Intel P4 3.0GhzHT, 3-4GB Ram WinXP
Photoshop won't open for me. It used to. Any idea how I might fix this?
When I try to open Photoshop, I get "Memory could not be allocated for the activation process. Please close all applications and try again."
I've done this with no applications after a fresh reboot and get the same message.
It only started recently. Photoshop used to open for me and was usable.
I got 3 or 4 GB of ram. I can't remember, but WinXP only sees about 3GB anyway. Either way should be more than enough, no?

Lee71 wrote:
hey john, thanks for resuscitating the topic. I on XP and it’s PS8
I have defragged, cleaned disc, etc.
In terms of symptoms, PS opens up and once open the prompt comes up. I hit okay and it shuts down.
i have tried CTRL + ALT + SHIFT whilst PS boots up; i get the prompt "ÿou currently have Adobe Photoshops primary Scratch and Windows' primary paging file on the same volume, which can result in reduced performance. It is reommmended that you set PS Primary Scratch Volume to be on a differrent volume, preferably on a different physical dirve."
I guess this means reinstall, partition and set up on a partitioned drive? I don't particularly want to take this course of action if there is an alternative. It doesn't make sense given I've got plenty of space.
No no need for that!
The message about the scratch drive is normal: the CTRL + ALT + SHIFT resets the preferences to the default for a single HDD. If you have more than one, go into Edit > Preferences > Performance and set the primary scratch drive to the one without the paging file.
Once you have OK'd that message it should go away if you do only have one HDD.
Partitioning will not do anything. The object of the separate drives (if you have them) is to avoid conflict between Scratch and Page file.
Do you still have your original problem?

Purchase requisition for service activity / element cannot be generated

Dear SAP MM Experts,
This is a service Creation from the PM order to Purchase Sercive Requisition.
The Error Message Is Generated :Purchase requisition for service activity / element cannot be generated
Diagnosis
Due to the system settings, the system is trying to generate a purchase
requisition for a service activity or a service activity element.
No service package has been created for the activity/element.
As a result, the system cannot generate a purchase requisition.
The activity/element is created or released, but the indicator for
generating a purchase requisition is not set.
Create a service package for the activity/element and then generate a
purchase requisition.
regards,
A S

Solved From PM side

Component for netwowrk activity

Similar Messages

Maybe you are looking for