Component "power dissipation" report using Multisim

Hello,
I have a large design that has 66 resistors and 38 transistors. As a sanity check, I'd like to be able to have Multisim let me know the dissipated power in each of these components. I know how to do this on a component by component basis in the DC Operating Point setup. Is there an easier way to get this info without creating a model/device parameter for "P" for all of these components? It would seem I'm overlooking something...
Thanks!
John

Thanks for the reply. Wiring in all those wattmeters would be even worse!
Here's what I did, although I'm sure there must be an easier way:
I exported the Multisim netlist to a .CIR file.
I then wrote a C++ program to read in the CIR file, find all the resistors, diodes and transistors then generate another file containing series of SPICE commands that could be run using "User Defined Analysis". It works!
Here's what my program outputs:
checknodes 1
save @qq32[p] @qq31[p] @qq6[p] @qq5[p] @qq36[p] @qq35[p] @qq12[p] @qq9[p] @qq22_a[p] @qq21_a[p] @qq16_a[p] @qq15_a[p] @qq14_a[p] @qq13_a[p] @qu5[p] @qu2[p] @qq25[p] @qq20[p] @qq19[p] @qq4[p] @qq3[p] @qq24[p] @qq23[p] @qq11[p] @qq10[p] @qq28[p] @qq8[p] @qq30[p] @qq29[p] @qq27[p] @qq26[p] @qq18[p] @qq17[p] @qq7[p] @rr60[p] @rr59[p] @rr58[p] @rr25[p] @rr57[p] @rr56[p] @rr6[p] @rr55[p] @rr54[p] @rr53[p] @rr52[p] @rr30[p] @rr15[p] @rr10[p] @rr12[p] @rr37[p] @rr13[p] @rr14[p] @rr29[p] @rr22[p] @rr35[p] @rr34[p] @rr33[p] @rr28[p] @rr27[p] @rr26[p] @rr20[p] @rr21[p] @rr17[p] @rr16[p] @rr7[p] @rr23[p] @rr32[p] @rr40[p] @rr45[p] @rr49[p] @rr46[p] @rr2[p] @rr5[p] @rr1[p] @rr3[p] @rr39[p] @rr38[p] @rr11[p] @rr36[p] @rr48[p] @rr47[p] @rr4[p] @rr44[p] @rr9[p] @rr24[p] @rr8[p] @rr43[p] @rr41[p] @rr42[p] @rr18[p] @rr31[p] @rr19[p] @dq22_b[p] @dq13_b[p] @dq21_b[p] @dq16_b[p] @dq15_b[p] @dq14_b[p]
iplot @qq32[p] @qq31[p] @qq6[p] @qq5[p] @qq36[p] @qq35[p] @qq12[p] @qq9[p] @qq22_a[p] @qq21_a[p] @qq16_a[p] @qq15_a[p] @qq14_a[p] @qq13_a[p] @qu5[p] @qu2[p] @qq25[p] @qq20[p] @qq19[p] @qq4[p] @qq3[p] @qq24[p] @qq23[p] @qq11[p] @qq10[p] @qq28[p] @qq8[p] @qq30[p] @qq29[p] @qq27[p] @qq26[p] @qq18[p] @qq17[p] @qq7[p] @rr60[p] @rr59[p] @rr58[p] @rr25[p] @rr57[p] @rr56[p] @rr6[p] @rr55[p] @rr54[p] @rr53[p] @rr52[p] @rr30[p] @rr15[p] @rr10[p] @rr12[p] @rr37[p] @rr13[p] @rr14[p] @rr29[p] @rr22[p] @rr35[p] @rr34[p] @rr33[p] @rr28[p] @rr27[p] @rr26[p] @rr20[p] @rr21[p] @rr17[p] @rr16[p] @rr7[p] @rr23[p] @rr32[p] @rr40[p] @rr45[p] @rr49[p] @rr46[p] @rr2[p] @rr5[p] @rr1[p] @rr3[p] @rr39[p] @rr38[p] @rr11[p] @rr36[p] @rr48[p] @rr47[p] @rr4[p] @rr44[p] @rr9[p] @rr24[p] @rr8[p] @rr43[p] @rr41[p] @rr42[p] @rr18[p] @rr31[p] @rr19[p] @dq22_b[p] @dq13_b[p] @dq21_b[p] @dq16_b[p] @dq15_b[p] @dq14_b[p]
set trtol = 7
set itl1 = 1000
set itl4 = 100
set convlimit
set rshunt = 1e+012
op -env-options
if-error end-scope audit-log-show
show all
showmod all
write-and-destroy-iplot C:\temp.raw
Cheers!
John

Similar Messages

How create animated power view reports using sharepoint list as a data source in sharepoint 2010?

Hi All,
I got a client requirement to create reports using SharePoint List as data source. The report should show reflection depends on values changed (I mean animation).
I have heard about the power view/power pivot which does this kind of animations in reports.
Can someone please guide me on creating reports which shows animations
In power view/power pivot using SharePoint List as data source in SharePoint 2010.
Thanks in advance.
MercuryMan

Hi MercuryMan,
Yes, Power View, a feature of SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint Server 2010 or SharePoint 2013 Enterprise Edition, is an interactive data exploration, visualization, and presentation experience.
It provides multiple views featuring tiles, slicers, a chart filter, and a number of visualizations, including cards, small multiples, and a bubble chart. So, we can use Power View to do intuitive ad-hoc reporting for business users such as data analysts, business
decision makers, and information workers.
Currently, Power View report only supports two types of data models: PowerPivot Worksheet, and data models based on Analysis Services Tabular Model or Multidimensional Cube.
In your scenario, you can create PowerPivot worksheets using SharePoint List as data source, deploy the PowerPivot worksheet to a SharePoint Library or PowerPivot Gallery, and then generate Power View reports based on the PowerPivot worksheets on the SharePoint
site.
To use SharePoint List as data source in Excel PowerPivot, you can refer to the following resource:
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/07/11/excel-services-using-a-sharepoint-list-as-a-data-source.aspx
http://technet.microsoft.com/en-us/library/hh230322.aspx
To create a Power View report based on PowerPivot model, you can refer to the following links:
http://technet.microsoft.com/en-us/library/hh231522.aspx
http://technet.microsoft.com/en-us/library/hh759325.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

How to Create Power View Report using power pivot file in SharePoint 2013

H,
I have power pivot and Power View excel files. Now i want to create the Power View report in SharePoint 2013.
What steps should i use?
Can anyone help me on it.
I need detailed step by step procedure.
Thanks & Regards
Poomani Sankaran

Hi Aditya,
Thanks for your reply.
I am using Enterprise edition of SharePoint 2013 only. SQL Server 2012 SP1.
I have configured Reporing Services also successfully. I got "Reporting" folder in "15" hive location "C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\WebServices"
SSRS Service application also i have created success in CA Manage Service Application.
I have done "Reporting Services Add-in for SharePoint" also which is "rsSharePoint.msi".
What should i do apart from this? Can you tell me. Its frustrating like anything.
I have added the "PowerPivot" excel in "PowerPivot Gallery" and clicked the icon "Create Power View Report"
Thanks in Advance.
Poomani Sankaran

Power point report using LabVIEW

Hai,
i am trying to generate some kind of reports in power point tthrough labview.
I have been searching in the net. i don't get the complete details like creating new slide , editing it and so on. Rather i could get details only for running the slide show.
i have tried with activex vis automation open.vi with the reference as MS- power point documnet window, slides ,etc.
that vi throws "not creatable object" for almost all reference except power point application reference.
Has anyone done this kind work with labview.
If anyone has idea about this please tell me how to do this.
Thanks,
sathish

Hello,
I think you also sent an email. I'll post some information for the masses as well:
The following is a very useful msdn.com document - a useful place to find information about microsoft products such as powerpoint.
Microsoft PowerPoint Objects http://msdn.microsoft.com/archive/default.asp?url=/archive/en-us/office97/html/web/006.asp
For adding a slide, see the quoted text in that document and corresponding example which starts "The following example adds a slide to the beginning of Sample Presentation."
Remember, the ActiveX API exposed by Powerpoint (or any other application with an ActiveX Server) is entirely independent of LabVIEW, so even a text based example suffices to elucidate the necessary calls to the API. It turns out that with a "presentation" reference we can get a "slides" reference using a property node, and then get to the "add" method using an invoke node. The attached screenshot (also shown below) shows how to expose this method in LabVIEW.
Thank you,
Message Edited by JLS on 06-30-2006 05:18 PM
Best,
JLS
Sixclear
Attachments:
Powerpoint ActiveX Add Slide.JPG ‏21 KB

Error while creating Power View Report via BISM connection.

I am able to create a PowerView Report using Microsoft BI Semantic Model connection without any problem. Everything works from home. But when I try to create Power View report using a BISM connection, I am running into errors. I've verified all permissions
are all set correctly and SQL Browser service is running as well. Please see below error message. Greatly appreciate any pointers.
Detailed error message
Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'TemporaryDataSource'. ---> Microsoft.AnalysisServices.AdomdClient.AdomdConnectionException:
A connection cannot be made to redirector. Ensure that 'SQL Browser' service is running. ---> System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was found at System.Net.Sockets.TcpClient..ctor(String
hostname, Int32 port) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) --- End of inner exception stack trace --- at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo
connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean&
isSessionTokenNeeded) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetInstancePort(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenConnection(ConnectionInfo
connectionInfo, Boolean& isSessionTokenNeeded) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Connect(Boolean
toIXMLA) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.ConnectToXMLA(Boolean createSession, Boolean isHTTP) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.Open() at Microsoft.ReportingServices.DataExtensions.AdoMdConnectionBase.InternalOpen()
at Microsoft.ReportingServices.Diagnostics.DataExtensionConnectionBase.OpenConnection(IProcessingDataSource dataSourceObj, DataSourceInfo dataSourceInfo, IDbConnection conn) --- End of inner exception stack trace ---;

So , have you actually came to a conclusion about the problem. I have a similar one in my environment.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus
xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">Erro
ao carregar o modelo para o item ou a fonte de dados 'http://gasmignethml/BICenter/Galeria%20PowerPivot/BIGASMIG.bism'. Verifique se as informações de conexão estão corretas e se você tem permissões para acessar a fonte de dados.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.5058.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Erro ao carregar o modelo para o item ou a fonte de dados 'http://gasmignethml/BICenter/Galeria%20PowerPivot/BIGASMIG.bism'.
Verifique se as informações de conexão estão corretas e se você tem permissões para acessar a fonte de dados.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Não é possível criar uma conexão com a fonte de dados 'TemporaryDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.AdomdClient</Source><Message>A
connection cannot be made to redirector. Ensure that 'SQL Browser' service is running.</Message><MoreInformation><Source>System</Source><Message>The
requested name is valid, but no data of the requested type was found</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Any help will be very welcome.
Thanks in advance
abcoura | osmanos.org

Update Power View reports properties using custom code

Is there any way to update power view reports uploaded in SharePoint 2013 shared data source link using custom code?
Best Regards,
Sameer Salunke
MCTS-Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

Someone out here must have an answer???? I know that SharePoint 2013 saves the view created in Power View therefore the metadata must be accessible somehow? Can someone explain
how to find that metadata in the SQL tables maybe? I would be surprised to find out I am the only one who needs this?
Ken Craig

Issue while generating report using web.show_document with https

Hi All,
I am facing some issue while seeing the report using web.show_document as shown below:
https://ucrmskr.apac.nsroot.net:10301/forms/html/001725032_gca.rtf_
In this case the report opens directly without asking for me to save or open or cancel option
whereas if I hit
http://scrmskr.apac.nsroot.net:7801/forms/html/001725032_gca.rtf_
it asks for save or open or cancel option
so that I can save the report to my machine and open in wordpad format
The report generated in the first case is not coming in proper format
Below are my forms.conf mappings:
# Name
# forms.conf - Forms component Apache directives configuration file.
# Purpose
# It should include the weblogic managed server (routing) directives for
# the servers where Forms applications are deployed and other miscellaneous
# Forms component OHS directives.
# Remarks
# This file is included with the OHS configuration under
# $OI/config/OHS/<OHS Node Name>/moduleconf sub-directory.
# virtual mapping for the /forms/html mapping.
RewriteEngine on
RewriteRule ^/forms/html/(..*) /workaroundhtml/$1 [PT]
AliasMatch ^/workaroundhtml/(..*) "/ucrmap1/weblogic/bea/ucrms/config/FormsComponent/forms/html/$1"
RewriteRule ^/ucrms/icons/(..*) "/workaroundicons/$1" [PT]
AliasMatch ^/workaroundicons/(..*) "/ucrmap1/weblogic/bea/ORA_PFRD/forms/java/$1"
RewriteRule ^/forms/help/(..*) "/workaroundhelp/$1" [PT]
AliasMatch ^/workaroundhelp/(..*) "/ucrmap1/ucrrgbg2/help/$1"
<Location /forms>
SetHandler weblogic-handler
WebLogicCluster kauh0079:9001
DynamicServerList OFF
</Location>
Please let me know what needs to be done additionally if we are trying to hit https because in the second case we were hitting http with similar mapping in diff environment and it was generating report successfully.
Regards,
Harish

Thanks for answering,
I changed the URL from
http://nbotlaguduru.dms.local/export/FMSLaborChargesalcs20060829132645.pdf
to
http://nbotlaguduru.dms.local:8889/export/FMSLaborChargesalcs20060829132645.pdf
and the same problem occured
the file is located on my local C drive in:
C:\lcs\export
seems as though I am missing something else as well
any ideas?

How to generate a PDF report using ADF RichTable?

Hi,
I am using JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660. I am displaying my data from db in a JSF Fragment(JSFF) using ADF RichTable component. Actually now I want to generate a PDF report using that data shown in the table on click of a Generate Button. Can anyone please provide me code or sample for that?
Thanks,
Vikas

http://kohlivikram.blogspot.com/2009/04/generate-pdf-report-in-adf.html
Thanks,
Navaneeth

Error launching the power pivot report builder in SharePoint 2013

I have sharepoint site which uses classic windows authentication.
i uploaded a simple excel file with two columns which has a data model created in Excel 2013.
I am trying to create a power view report out of it in SharePoint ..
I am getting following errorrs
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://devreports.hellosolutions.com/TestPowerPivotGallery/Ageofrol.xlsx'. Verify that the connection information is
correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.5058.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://devreports.hellosolutions.com/TestPowerPivotGallery/Ageofrol.xlsx'. Verify that the connection information
is correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error
navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
kukdai

Hi,
According to your post, my understanding is that you could not launch report builder in the client machine.
Did you install the .Net 4.0 framework on your machine?
.Net 4.0 framework needed to be installed on each user's machine, you can install it, then check whether it works.
More information:
http://social.technet.microsoft.com/Forums/en-US/ac51a022-6173-4840-96b5-32119b132bb5/unable-to-launch-report-builder-30?forum=sqlreportingservices
As this is the forum for SharePoint server on-premise, I’m not familiar with the Reporting service, for this issue, I recommend you can post a new question in the forum for SQL Server Reporting Services.
https://social.technet.microsoft.com/Forums/en-US/ac51a022-6173-4840-96b5-32119b132bb5/unable-to-launch-report-builder-30?forum=sqlreportingservices
More experts will assist you, then you will get more information relation to Reporting Services.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to measure torque on a DC motor using Multisim?

Hello,
I would like to know how we measure torque on a DC motor using Multisim Education edition.
I've searched for the component, "eddy current load brake", but could not find it. Is that component in Multisim?
Thank you,
Neil

Hi,
Please refer to this forum post.
http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/PM-DC-Motor-Model-Trouble/td-p/1931859
Hope this helps.
Regards,
Tayyab R,
National Instruments.

CREATING POWERPOINT REPORTS USING JAWIN

Hey all,
I have a certain requirement in creating a power point report through java using[b] jawin.
I want to create a report in the Power Point with all the values coming from some java object, say for example �an array list or any collection objects�. It should also be able to display some images.
It would be very helpful if anyone could send in some sample code as its a very urgent requirement. and since am new to JAWIN.
Also, is there any other better option to do this other than using JAWIN?

Hi,
You can give a try to :
- JACOb at http://sourceforge.net/projects/jacob-project/
- SWT at http://www.eclipse.org/articles/Article-ActiveX%20Support%20in%20SWT/ActiveX%20Support%20in%20SWT.html
- POI at http://jakarta.apache.org/poi/
- check OpenOffice2 : it can save M$ format and has some java interface like beanshell.
--Marc (http://jnative.sf.net)

Power View Reports Dynamic filter

Greetings Everyone !
I have a requirement to create a trend chart to show trend for last six months. So on trend chart, it should reflect previous 6 months (i.e. Jul, Aug, Sep, Oct, Nov, Dec) and value against each month.
Problem:
I am using Power view in SharePoint (for multidimensional model) to create this report from SSAS (SQL 2012 SP1) and it doesn't support any custom MDX query to filter data.
Please help if you have any solution for this.
Best Regards,
Youdhbir
Blog : http://youdhbir.blogspot.in/

Hi,
According to your post, my understanding is that you wanted to add alert and subscription for the power view report in sharepoint 2013.
You need to Additional Configuration to provision for subscriptions and alerts when you install Reporting Services SharePoint Mode for SharePoint 2013.
The Reporting Services subscription and data alert features may require the configuration of SQL Server Agent permissions. For more information, see
Provision Subscriptions and Alerts for SSRS Service Applications
PerformancePoint Services is a SharePoint Server 2013 service application. It enables users to create business intelligence (BI) dashboards that provide insight into an organization's performance. You can create custom reports, filters, tabular data sources,
and scorecard transforms to extend the native functionality of PerformancePoint Services.
Power View in SharePoint is browser-based Silverlight application, a feature of the SQL Server 2012 Service Pack 1 (SP 1) Reporting Services Add-in for Microsoft SharePoint Server 2010 and 2013. Creating, opening, and saving Power View reports (RDLX files)
all take place in SharePoint Server 2010 and 2013.
More information:
PerformancePoint Services in SharePoint 2013
Power View (SSRS)
Power View in SharePoint Server: Create, save, and print reports
PowerPivot, PowerView and PerformancePoint: Which should you use?
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Where can I find metadata for Power View reports created in sharepoint 2013.

I am looking for what I would assume is the sql server tables that would hold the MDX (DAX) Queries for the power view reports. Example my customers may create say 30 reports and I need to know quickly if an attribute I am changing is in those reports.
How can I find out what report(s) are using that attribute/measure? Not sure that it matters but using sharepoint 2013 on premise and connecting to Analysis Services (molap).
Ken Craig

P.S. if this is still not making sense create a power view report in SharePoint from a SSAS cube. Save that power view report in SharePoint.  The power view report should
have a couple of measures and 1 or 2 dimension. Open the report just to confirm it is saved correctly. Now go to SSAS and rename 1 of the measures or dimensions that you used, Save and rebuild your olap . If it’s a calculated measure
you just need to save olap.    Now open your power view report and notice that that measure/dimension you changed is no longer in the report.
IN one hand it is great that reports do not error and break; however, on the other hand the users might not know what measure/dimension changed and then be lost/mad because the report no longer
works like they want. In my opinion it would have been better if the power view broke with an error message that it cannot load because measure x does not exist than to just load fine.
In any case I need a method to know when a dimension/measure is modified what reports are using it.   Another example is this could even be a case where the dimension values are getting
modified and we need to potentially make a update to any power view/pivot using this dimension as a filter?
Ken Craig

Power view reports in sharepoint 2013 :

How can i add alert and subscription for the power view report in sharepoint 2013 ?.
and please let me know the difference beetween the performance point service and power view report.
Please response fast.

Hi,
According to your post, my understanding is that you wanted to add alert and subscription for the power view report in sharepoint 2013.
You need to Additional Configuration to provision for subscriptions and alerts when you install Reporting Services SharePoint Mode for SharePoint 2013.
The Reporting Services subscription and data alert features may require the configuration of SQL Server Agent permissions. For more information, see
Provision Subscriptions and Alerts for SSRS Service Applications
PerformancePoint Services is a SharePoint Server 2013 service application. It enables users to create business intelligence (BI) dashboards that provide insight into an organization's performance. You can create custom reports, filters, tabular data sources,
and scorecard transforms to extend the native functionality of PerformancePoint Services.
Power View in SharePoint is browser-based Silverlight application, a feature of the SQL Server 2012 Service Pack 1 (SP 1) Reporting Services Add-in for Microsoft SharePoint Server 2010 and 2013. Creating, opening, and saving Power View reports (RDLX files)
all take place in SharePoint Server 2010 and 2013.
More information:
PerformancePoint Services in SharePoint 2013
Power View (SSRS)
Power View in SharePoint Server: Create, save, and print reports
PowerPivot, PowerView and PerformancePoint: Which should you use?
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Get Pagination in power view report

Hi all
We are trying to create power view reports in Sharepoint 2013 using SSAS cubes as our datasource.
But most of these reports return a huge amount of data. Is there any way I can provide pagination (Like in SSRS reports) ?
Thanks in Advance

Hi,
Yes,you can display the Power View Report in the Page Viewer Web Part and then you can find that the pagination controls at the bottom left & bottom right are active.
Reference:
http://www.sqlchick.com/entries/2013/6/3/displaying-a-power-view-report-on-a-sharepoint-page.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Component "power dissipation" report using Multisim

Similar Messages

Maybe you are looking for