Component wizard missing most footprint pins when trying to build a BGA part
Help with this may keep me from switching to PADS....
I am attempting to create an Altera FPGA (EP2C35F675) symbol for Multisim. Using the component wizard I started the part, selected the ALTERA_FLBGA672_1.0 footprint (shockingly, one existed). This is a large part...672 pins so I had my doubts but moved on to meticulously adding the 9 symbol sections by hand (the fact that this cannot be done through either a part conversion or a text import is, well, embarassing for NI). Making it through that with a cramped hand, I then moved to the footprint pin mapping, which failed. The pins that do exist in the Ultiboard footprint do not all appear or are available to be mapped (this is step 5 of 6). Some do, but its only the first 48 of the 672 that should be available.
Has anyone else encountered this problem? Is an issue with the built in footprint or a bug in the application?
Thanks in advance.
Thank you udflyer,
Good catch, I will submit the issue in our defect tracker and pass this information to the correct department. It should be addressed in the next release of the product.
Thanks once again, and I hope this issue didnt cause you too much trouble.
M.I.
National Instruments
EWB Group.
Similar Messages
-
Get "missing operating system" message when trying to access bootcamp
Get "missing operating system" message when trying to access bootcamp in win 7
i have windows instaled about a year now.yesterday i tranfer 300 gb of music in my laptop.today i open my mac hold alt on start up to sellect opereting system,i found MacintosHD,recovery, and windows, and i select the windows to boot,but says to me (missing operating system).i boot again osx to see what hapend.osx is workin perfect.i tried to boot windows again but the same msg (missing operating system).i have not make any changes in my mac osx...!!!Get "missing operating system" message when trying to access bootcamp in win 7
i have windows instaled about a year now.yesterday i tranfer 300 gb of music in my laptop.today i open my mac hold alt on start up to sellect opereting system,i found MacintosHD,recovery, and windows, and i select the windows to boot,but says to me (missing operating system).i boot again osx to see what hapend.osx is workin perfect.i tried to boot windows again but the same msg (missing operating system).i have not make any changes in my mac osx...!!! -
[Solved] aclocal error when trying to build caja-dropbox
When trying to build caja-dropbox from https://aur.archlinux.org/packages/caja-dropbox/ I get the following error:
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/playenball/Downloads/caja-dropbox/src/caja-dropbox-1.8.0/missing aclocal-1.14 -I m4
/home/playenball/Downloads/caja-dropbox/src/caja-dropbox-1.8.0/missing: line 81: aclocal-1.14: command not found
WARNING: 'aclocal-1.14' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<http://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<http://www.gnu.org/software/autoconf>
<http://www.gnu.org/software/m4/>
<http://www.perl.org/>
Makefile:398: recipe for target 'aclocal.m4' failed
make: *** [aclocal.m4] Error 127
==> ERROR: A failure occurred in build().
Aborting...
I am not sure how to go about fixing this error. I was hoping that some here might be able to help or point me in the right direction.
Thanks.
Edit: I have tried building in a clean chroot and I get the same error.
Last edited by playenball (2015-02-06 06:43:07)clfarron4 wrote:A possible related bug is this, referenced in this thread.
clfarron4: It looks like it could be however the suggested solution in the bug report did not solve the problem.
As I did not want to solve it dirty as Thorsten Reinbold did to build his package I downgraded automake from 1.15 to 1.14 temporarily and built the package with no errors. I then installed the package and all is working properly. I then reupgraded to version 1.15. -
Error when trying to Build ESS application after changes
Hi Guys,
I am trying to build DC after changes to the Applciaiton. But the build is failing with the following error. I will able to build and check-in yesterday. Today i am facing this typical issue. Any suggestions please.
Jan 30, 2007 11:48:05 AM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: ess/us/pdata: Build failed for sap.com/ess/us/pdata(sap.com_SAP_ESS_1) in variant "default": The Build terminated with errors
com.sap.tc.buildtool.PluginInstantiateException: Failed to create plugin instance for class com.sap.tc.buildplugin.DefaultPlugin due to a ClassNotFoundException
at com.sap.tc.buildtool.PluginHandlerImpl.getBuildPluginInstance(PluginHandlerImpl.java:314)
at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:339)
at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5559)
at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Caused by: java.lang.ClassNotFoundException: com.sap.tc.buildplugin.DefaultPlugin
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:866)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at com.sap.tc.buildtool.PluginClassLoader.loadClass(PluginClassLoader.java:241)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at com.sap.tc.buildtool.JarHandler.loadClass(JarHandler.java:143)
at com.sap.tc.buildtool.PluginHandlerImpl.getBuildPluginInstance(PluginHandlerImpl.java:294)
... 8 more
Build log -
Development Component Build (2007-01-30 11:48:05)
Component name: ess/us/pdata
Component vendor: sap.com
SC compartment: sap.com_SAP_ESS_1
Configuration: DJI_EMXSSTR_D
Location: DJI_EMXSSTR_D
Source code location: http://nwd2sm1.corp.analog.com:50300/dtr/ws/EMXSSTR/sap.com_SAP_ESS/dev/inactive/DCs/sap.com/ess/us/pdata/_comp/
DC root folder: C:\Documents and Settings\rjogam\.dtc\4\DCs\sap.com\ess\us\pdata\_comp\
DC type: Web Dynpro
Host: RJOGAM-L01
DC Model check:
[dcmake] All used DCs are available locally
[dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/col/api"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/cmi"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/logging"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.exception"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
[dcmake] validating dependency to used DC "sap.com/pcui_gp/xssfpm"
[dcmake] validating dependency to used DC "sap.com/pcui_gp/xssutils"
[dcmake] validating dependency to used DC "sap.com/ess/per"
[dcmake] DC model check OK
Start build plugin:
[dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
[dcmake] starting build plugin from : C:\Documents and Settings\rjogam\.dtc\4\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\
Build started 2007-01-30 11:48:05 EST
Failed to create plugin instance for class com.sap.tc.buildplugin.DefaultPlugin due to a ClassNotFoundException
Build Stopped
regards
SamI forgot how I got this issue resolved. Probably we re-started the portal and the NWDI J2EE Engine. But I am sure that we did not do much in fixing this.
-
Encore CS4/Windows 7 64-bit--When trying to "Build" Encore quits.
After clicking Build, new window opens showing a double bar for burning to DVD. Almost immediately I get error message from Adobe saying Encore has quit, wanting to send Adobe engineers details.
Updated Roxio-Sonic DVD Drivers: "pxengine4_18_16a.exe", Encore still Crashes.
Have tried defrag/restarts....Nothing works.
How do I get Encore to Build to a DVD?? Or What is going on with W7 64-bit and Adobe.Giorgio,
Thanks for the taking the time to respond. Nothing suggested works.
You suggested: build an image of your author or build the DVD in your HD?
I tried both and still get "Program Quits" window, with Encore shutting down without any error message.
You suggested: disk problem.
I tried different Sony, and then Verbatim disks. Same problem.
Additional Project Info:
Time Line: 1:18:07
Preferences: Playback Quality: Automatic.
Disc Info: free space thermometer: Blue all the way across.
4.7 GB Used. 3.309 MB free.
Same problem also exists with Premier Pro CS4. PPr will just quit for no reason that is detectable/No error message. I do frequent saves so have not lost anything in PPr, just have to restart program. The problem with PPr is not consistant, whereas with Encore it happens every time when attempting to "Build". I suspect fault is within Encore/PPr and Win 7 Ultimate 64 bit and latest updates from Microsoft. Both programs ran without problems before. By the way. I tried to update PPr & Encore, and I could not, as I have latest versions.
By the way....You are writing from Italy? Where? My grandparents came to New York from Italy around 1907.
Thanks for your effort,
Tony Salso -
Build failure when trying to build haproxy with SSL support.
Hello everybody,
I don't know if this is the right "context" to submit this question.
How ever I'm having problem with building haproxy 1.5.5 with SSL support.
I'm running SLES 11 SP3 with the latest updates via YAST2.
Building without SSL support works fine.
I use the syntax:
make TARGET=linux2628 USE_OPENSSL=1
And here is the output:
gcc -Iinclude -Iebtree -Wall -O2 -g -fno-strict-aliasing -DCONFIG_HAP_LINUX_SPLICE -DTPROXY -DCONFIG_HAP_LINUX_TPROXY -DCONFIG_HAP_CRYPT -DENABLE_POLL -DENABLE_EPOLL -DUSE_CPU_AFFINITY -DASSUME_SPLICE_WORKS -DUSE_ACCEPT4 -DNETFILTER -DUSE_GETSOCKNAME -DUSE_OPENSSL -DUSE_SYSCALL_FUTEX -DCONFIG_HAPROXY_VERSION=\"1.5.5\" -DCONFIG_HAPROXY_DATE=\"2014/10/07\" \
-DBUILD_TARGET='"linux2628"' \
-DBUILD_ARCH='""' \
-DBUILD_CPU='"generic"' \
-DBUILD_CC='"gcc"' \
-DBUILD_CFLAGS='"-O2 -g -fno-strict-aliasing"' \
-DBUILD_OPTIONS='"USE_OPENSSL=1"' \
-c -o src/haproxy.o src/haproxy.c
In file included from include/types/acl.h:33,
from include/types/proxy.h:40,
from include/proto/log.h:32,
from includehttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.com/common/cfgparse.h:29,
from src/haproxy.c:61:
include/types/server.h:29:25: error: openssl/ssl.h: No such file or directory
In file included from include/types/connection.h:30,
from include/types/server.h:36,
from include/types/acl.h:33,
from include/types/proxy.h:40,
from include/proto/log.h:32,
from includehttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.com/common/cfgparse.h:29,
from src/haproxy.c:61:
include/types/listener.h:127: error: expected specifier-qualifier-list before SSL_CTX
In file included from include/types/acl.h:33,
from include/types/proxy.h:40,
from include/proto/log.h:32,
from includehttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.com/common/cfgparse.h:29,
from src/haproxy.c:61:
include/types/server.h:207: error: expected specifier-qualifier-list before SSL_CTX
In file included from src/haproxy.c:90:
include/proto/listener.h: In function bind_conf_alloc:
include/proto/listener.h:130: error: struct bind_conf has no member named file
include/proto/listener.h:131: error: struct bind_conf has no member named line
include/proto/listener.h:133: error: struct bind_conf has no member named by_fe
include/proto/listener.h:133: error: struct bind_conf has no member named by_fe
include/proto/listener.h:133: error: struct bind_conf has no member named by_fe
include/proto/listener.h:133: error: struct bind_conf has no member named by_fe
include/proto/listener.h:133: error: struct bind_conf has no member named by_fe
include/proto/listener.h:135: error: struct bind_conf has no member named arg
include/proto/listener.h:137: error: struct bind_conf has no member named ux
include/proto/listener.h:138: error: struct bind_conf has no member named ux
include/proto/listener.h:139: error: struct bind_conf has no member named ux
include/proto/listener.h:141: error: struct bind_conf has no member named listeners
include/proto/listener.h:141: error: struct bind_conf has no member named listeners
include/proto/listener.h:141: error: struct bind_conf has no member named listeners
In file included from src/haproxy.c:107:
include/proto/ssl_sock.h: At top level:
include/proto/ssl_sock.h:46: error: expected declaration specifiers or ... before SSL_CTX
src/haproxy.c: In function display_build_opts:
src/haproxy.c:272: error: expected ) before OPENSSL_VERSION_TEXT
src/haproxy.c:274: warning: implicit declaration of function SSLeay_version
src/haproxy.c:274: error: SSLEAY_VERSION undeclared (first use in this function)
src/haproxy.c:274: error: (Each undeclared identifier is reported only once
src/haproxy.c:274: error: for each function it appears in.)
src/haproxy.c:275: error: OPENSSL_VERSION_NUMBER undeclared (first use in this function)
src/haproxy.c:275: warning: implicit declaration of function SSLeay
src/haproxy.c:275: warning: format %s expects type char *, but argument 2 has type int
src/haproxy.c: In function deinit:
src/haproxy.c:1188: error: struct bind_conf has no member named by_fe
src/haproxy.c:1188: error: struct bind_conf has no member named by_fe
src/haproxy.c:1188: error: struct bind_conf has no member named by_fe
src/haproxy.c:1188: warning: left-hand operand of comma expression has no effect
src/haproxy.c:1188: error: struct bind_conf has no member named by_fe
src/haproxy.c:1188: error: struct bind_conf has no member named by_fe
src/haproxy.c:1188: error: struct bind_conf has no member named by_fe
src/haproxy.c:1196: error: struct bind_conf has no member named file
src/haproxy.c:1197: error: struct bind_conf has no member named arg
src/haproxy.c:1198: error: struct bind_conf has no member named by_fe
src/haproxy.c:1198: warning: type defaults to int in declaration of __ret
src/haproxy.c:1198: error: struct bind_conf has no member named by_fe
src/haproxy.c:1198: error: struct bind_conf has no member named by_fe
src/haproxy.c:1198: error: struct bind_conf has no member named by_fe
src/haproxy.c:1198: error: struct bind_conf has no member named by_fe
src/haproxy.c:1198: error: struct bind_conf has no member named by_fe
make: *** [src/haproxy.o] Error 1
I'm I missing some libs or sources from OpenSSL ?
And/or need to point them out so that make/gcc can find them?
I have copy haproxy from another machine where I did the build process on.
But I would like to be able to build it on my SLES 11 SP3 installation.
Thank you in advance.Originally Posted by smflood
On 17/10/2014 15:36, mattias bjork wrote:
> I don't know if this is the right "context" to submit this question.
>
> How ever I'm having problem with building haproxy 1.5.5 with SSL
> support.
>
> I'm running SLES 11 SP3 with the latest updates via YAST2.
>
> Building without SSL support works fine.
>
> I use the syntax:
>
> make TARGET=linux2628 USE_OPENSSL=1
>
> And here is the output:
>
> gcc -Iinclude -Iebtree -Wall -O2 -g -fno-strict-aliasing
> -DCONFIG_HAP_LINUX_SPLICE -DTPROXY -DCONFIG_HAP_LINUX_TPROXY
> -DCONFIG_HAP_CRYPT -DENABLE_POLL -DENABLE_EPOLL -DUSE_CPU_AFFINITY
> -DASSUME_SPLICE_WORKS -DUSE_ACCEPT4 -DNETFILTER -DUSE_GETSOCKNAME
> -DUSE_OPENSSL -DUSE_SYSCALL_FUTEX -DCONFIG_HAPROXY_VERSION=\"1.5.5\"
> -DCONFIG_HAPROXY_DATE=\"2014/10/07\" \
> -DBUILD_TARGET='"linux2628"' \
> -DBUILD_ARCH='""' \
> -DBUILD_CPU='"generic"' \
> -DBUILD_CC='"gcc"' \
> -DBUILD_CFLAGS='"-O2 -g -fno-strict-aliasing"' \
> -DBUILD_OPTIONS='"USE_OPENSSL=1"' \
> -c -o src/haproxy.o src/haproxy.c
> In file included from include/types/acl.h:33,
> from include/types/proxy.h:40,
> from include/proto/log.h:32,
> from
> includehttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.com/common/cfgparse.h:29,
> from src/haproxy.c:61:
> include/types/server.h:29:25: error: openssl/ssl.h: No such file or
> directory
> In file included from include/types/connection.h:30,
> from include/types/server.h:36,
> from include/types/acl.h:33,
> from include/types/proxy.h:40,
> from include/proto/log.h:32,
> from
> includehttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.com/common/cfgparse.h:29,
> from src/haproxy.c:61:
> include/types/listener.h:127: error: expected specifier-qualifier-list
> before �SSL_CTX�
> In file included from include/types/acl.h:33,
> from include/types/proxy.h:40,
> from include/proto/log.h:32,
> from
> includehttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.comhttps://www.novell.com/common/cfgparse.h:29,
> from src/haproxy.c:61:
> include/types/server.h:207: error: expected specifier-qualifier-list
> before �SSL_CTX�
> In file included from src/haproxy.c:90:
> include/proto/listener.h: In function �bind_conf_alloc�:
> include/proto/listener.h:130: error: �struct bind_conf� has no member
> named �file�
> include/proto/listener.h:131: error: �struct bind_conf� has no member
> named �line�
> include/proto/listener.h:133: error: �struct bind_conf� has no member
> named �by_fe�
> include/proto/listener.h:133: error: �struct bind_conf� has no member
> named �by_fe�
> include/proto/listener.h:133: error: �struct bind_conf� has no member
> named �by_fe�
> include/proto/listener.h:133: error: �struct bind_conf� has no member
> named �by_fe�
> include/proto/listener.h:133: error: �struct bind_conf� has no member
> named �by_fe�
> include/proto/listener.h:135: error: �struct bind_conf� has no member
> named �arg�
> include/proto/listener.h:137: error: �struct bind_conf� has no member
> named �ux�
> include/proto/listener.h:138: error: �struct bind_conf� has no member
> named �ux�
> include/proto/listener.h:139: error: �struct bind_conf� has no member
> named �ux�
> include/proto/listener.h:141: error: �struct bind_conf� has no member
> named �listeners�
> include/proto/listener.h:141: error: �struct bind_conf� has no member
> named �listeners�
> include/proto/listener.h:141: error: �struct bind_conf� has no member
> named �listeners�
> In file included from src/haproxy.c:107:
> include/proto/ssl_sock.h: At top level:
> include/proto/ssl_sock.h:46: error: expected declaration specifiers or
> �...� before �SSL_CTX�
> src/haproxy.c: In function �display_build_opts�:
> src/haproxy.c:272: error: expected �)� before �OPENSSL_VERSION_TEXT�
> src/haproxy.c:274: warning: implicit declaration of function
> �SSLeay_version�
> src/haproxy.c:274: error: �SSLEAY_VERSION� undeclared (first use in this
> function)
> src/haproxy.c:274: error: (Each undeclared identifier is reported only
> once
> src/haproxy.c:274: error: for each function it appears in.)
> src/haproxy.c:275: error: �OPENSSL_VERSION_NUMBER� undeclared (first use
> in this function)
> src/haproxy.c:275: warning: implicit declaration of function �SSLeay�
> src/haproxy.c:275: warning: format �%s� expects type �char *�, but
> argument 2 has type �int�
> src/haproxy.c: In function �deinit�:
> src/haproxy.c:1188: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1188: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1188: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1188: warning: left-hand operand of comma expression has
> no effect
> src/haproxy.c:1188: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1188: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1188: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1196: error: �struct bind_conf� has no member named
> �file�
> src/haproxy.c:1197: error: �struct bind_conf� has no member named �arg�
> src/haproxy.c:1198: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1198: warning: type defaults to �int� in declaration of
> �__ret�
> src/haproxy.c:1198: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1198: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1198: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1198: error: �struct bind_conf� has no member named
> �by_fe�
> src/haproxy.c:1198: error: �struct bind_conf� has no member named
> �by_fe�
> make: *** [src/haproxy.o] Error 1
>
>
> I'm I missing some libs or sources from OpenSSL ?
>
> And/or need to point them out so that make/gcc can find them?
>
> I have copy haproxy from another machine where I did the build process
> on.
>
> But I would like to be able to build it on my SLES 11 SP3 installation.
So you're trying to build HAProxy 1.5.5 from source?
Do you have libopenssl and libopenssl-devel installed? What does "rpm
-qa | grep ssl" report?
You might have better luck installing HAProxy 1.5.5 already built for
SLES11 SP3 via the openSUSE Build Service @
https://build.opensuse.org/package/s...ackage=haproxy
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.
Hello Simon,
Yes I'm trying to build it from source.
Unfortunately I don't have them installed.
Here is the output:
sudo -i rpm -qa | grep -i ssl
openssl-0.9.8j-0.62.1
libopenssl0_9_8-0.9.8j-0.62.1
libopenssl0_9_8-32bit-0.9.8j-0.62.1
perl-IO-Socket-SSL-1.38-5.2.2
perl-Net-SSLeay-1.35-2.14
openssl-certs-1.97-0.3.1
Thank you for your speedy reply. -
Error when trying to build to iOS
I am using Flash Buidler 4.7 on a Mac OS X 10.7 with latest java version 1.7 (64bits), I am trying to build some samples provided on this page:
http://gaming.adobe.com/getstarted/
I can test on the AIR simulator, but when I try to build on iOS simulator or device, I get the following error:
Error occurred while packaging the application:
Error: This Java instance does not support a 32-bit JVM.
Please install the desired version.
I don't really understand the error, does it means I need to remove the java version and install another one? And old one or a 32bit one? I'm not sure
I've googled but didn't find a proper answer, so any help would be appreciated.
Thanks.Found on the Console this:
10/11/2012 22:19:29.803 [0x0-0x17b17b].org.eclipse.eclipse: !MESSAGE Rani.. enabling this logging again to verify(during testing)[/usr/bin/java, -d32, -Xms512m, -Xmx1024m, -jar, /Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.348297/AIRSDK/lib/adt.jar, -package, -target, ipa-test-interpreter-simulator, -storetype, pkcs12, -keystore, /Flash Builder/Certificates.p12, -storepass, XXXXXX, WasteInvaders.ipa, WasteInvaders-app.xml, AppIcons, assets, com, DebugHostInfo.xml, OnkyIta.ttf, WasteInvaders.swf, -platformsdk, /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs/iPhoneSimulator6.0.sdk]
I guess if I could remove the -d32 it may work, but I can't find where to change this. -
"Stream not Initialized" message when trying to build Encore project.
I have been using Adobe Encore CS6 for a while now, using three video camera models.
9 times out of 10 I have no problems making my DVDs, yet every so often, the video clips will have audio and video of different lengths.
Whenever this happens, if I try to build the project, I get an error message pop up stating "Stream not initialized".
I can adjust the clips so that the audio and video are the same length, thus eliminating the tiny, often two frame gap in the timeline, but this only fixes the problem some times.
Today it isn't fixing the problem at all.
I've tried transcoding the clips, even though they are in DVD format directly from the camera, yet still get the same error message.
Any help with this issue would be a god send as it is starting to drive me potty!
Thanks.Giorgio,
Thanks for the taking the time to respond. Nothing suggested works.
You suggested: build an image of your author or build the DVD in your HD?
I tried both and still get "Program Quits" window, with Encore shutting down without any error message.
You suggested: disk problem.
I tried different Sony, and then Verbatim disks. Same problem.
Additional Project Info:
Time Line: 1:18:07
Preferences: Playback Quality: Automatic.
Disc Info: free space thermometer: Blue all the way across.
4.7 GB Used. 3.309 MB free.
Same problem also exists with Premier Pro CS4. PPr will just quit for no reason that is detectable/No error message. I do frequent saves so have not lost anything in PPr, just have to restart program. The problem with PPr is not consistant, whereas with Encore it happens every time when attempting to "Build". I suspect fault is within Encore/PPr and Win 7 Ultimate 64 bit and latest updates from Microsoft. Both programs ran without problems before. By the way. I tried to update PPr & Encore, and I could not, as I have latest versions.
By the way....You are writing from Italy? Where? My grandparents came to New York from Italy around 1907.
Thanks for your effort,
Tony Salso -
Linker error when trying to build OCCI app on Solaris
Hi,
I tried to build an example that uses OCCI and here are the unresolved symbols.
Undefined first referenced
symbol in file
oracle::occi::Environment*oracle::occi::Environment::createEnvironment(oracle::occi::Environment::Mode,void*,void*(*)(void*,u
nsigned),void*(*)(void*,void*,unsigned),void(*)(void*,void*)) OCIDBConnectionTest.o
oracle::occi::MetaData::~MetaData() OCIDBConnectionTest.o
ld: fatal: Symbol referencing errors. No output written to APR
rm /tmp/c++filt.16625.1.err
gmake: *** [APR] Error 1
I am using SUN compiler, here is the version information.
CC: Sun C++ 5.5 2003/03/12
Thanks for help,
SaiDear Krishna,
Thanks for your reply. The problem is with my link command, I was not linking in libocci. BTW, I am using version 9.
Everything works now.
Thanks again,
Sai -
CS4 says missing or unavail codec when trying to open .avi file in abobe workbook cd
I am running CS4 on a Mac and when I try to open a lesson from the Adobe lessons (In a Book series) I am getting a message that the codec is missing or unavailable for the AVI file. Actually, it cannot find the file initially, and when I point it to it in the lessons directory I get the message when it trys to open. Help
Thanks...
ScottFirst, thank you for the response. I went in the QT library and removed the xvid codec "XviD_Codec 1.0 alpha.component" and the file still doesn't play in either QT or CS4. I can hear the audio, but there is no video. I earlier had tried downloading other codecs for QT, but they don't appear in the library. I actually started by deleting QT and reinstalling, but that didn't work either. The video plays in VLC. When I look at video properties on QT it says the format is DVSD. I read somewhere else that if I can get the file to play in QT then it sould play in Premiere also...
ok... editing my answer.... I deleted the same codec from the main library/quicktime and it all works fine! I initally deleted it from the QT library under a user (me) and that didn't fix it... Thanks a lot!
Scott -
Missing Playlist in iTunes when trying to sync iPod nano
I have a playlist called new tunes, it's my most recent songs added to iTunes. For some reason when I plug in my iPod nano I don't have this playlist available to sync to my iPod, it's not in the list of playlists available to sync to the iPod nano. I see all the other playlists available but not this one.
So What I tried next is to make a second playlist that mirrors the first and this playlist doesn't show up in the iPod selection either. What gives? I would love to have this playlist available for my iPod but I don't know how to get it on thereSee:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities -
Get "missing operating system" message when trying to access bootcamp since installing Lion.
I cannot access bootcamp since installing Lion, either through Bootpicker or after holding down the option key after restart. I get the message "Missing operating system." I have access to the bootcamp partition. It shows up on my Mac desktop and was able to run disk verify and repair on it from disk utility. No change. I am using a 2.16 GHz Intel Core 2 Duo processor. Did Lion relabel the bootcamp disk when it created the recovery disk? Thanks.
See here the solution:
https://discussions.apple.com/thread/3199163?start=0&tstart=0 -
Missing Points, getting Error when trying to Report missing points.
I recently made an in store purchase, paid with my best buy credit card, but was asked for and even confirmed my best buy info for my account at the register. The reciept does not show my member id, nor does my account show the points pending or otherwise.
The date of purchase was 08/01/2014, more than enough time has passed for them to atleast show up as pending on the account.
I did recieve the terrms and conditions via email for my warranty purchased on this reciept, so I know my member ID was indeed used during the transaction, but did not appear on the reciept for whatever reason.
I'd be more than happy to provide the customer service pin via a PM, just need to know who to send it to. The email address for my best buy account, is the same one used for the account here.Hi Veroku_Chan,
I pulled up your account information and can see the purchase that you made back on 8/1/2014. That purchase is currently pending in your account; however, it appears that you actually have two active My Best Buy™ accounts. With that being said, I would suggest that we merge the two accounts together. The merge process would involve closing one account, and then moving any unused points/certificates from the closed account to the active primary account.
Before I can merge your accounts, I am going to need some additional information from. To gather that information and further discuss a merge, I will be sending you a private message. You can check your private messages by first logging into the forum and clicking on the yellow envelope at the top of the page.
Merging My Best Buy™ Accounts
Thank you for posting to the forum!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message -
'x' missing from top corner when trying to delete an app ios 6.1.2
Hi all,
First post so be gentle. I have latest IOS 6.1.2 for IPad Retina Display and I can't delete any app by holding the icon till it shakes. It does start shaking, but the 'x' is missing form the top corner. Have rebooted it but still no joy. Any ideas and has anyone else had this?
Kind Regards
ColDid you set any restrictions?
Settings>General>Restrictions>Deleting Apps? -
Why do I get "missing plug-in"notice when trying to download a document requiring acrobat reader?
I cannot download a prospectus that requires acrobat reader. There is a message on the site that states I am "missing plug-in". I have contacted the issuer of the prospectus and they say the path is correct. I have even downloaded the acrobat reader software that they suggested. I uninstalled this because it didn't work either. What would the missing plug-in be and where can I get it? Thank you for any help.
I really appreciate the help. I always have had my Preview selected as the default. I went through all the steps again just to make sure I hadn't inadvertently changed something. I still cannot open this link. You and WZZZ have made me realize I may not have explained my problem well enough.
I actually don't have an attached PDF in my email. What they sent me was a link to a website that was to open my prospectus within the browser. The senders of the email also stated that I would need the Adobe Reader to open it. I downloaded their version of Adobe Reader, but that didn't work either, so I uninstalled it. I deleted the Adobe Reader Plug-in from HDD - Library - Internet Plug-ins. That didn't work either. I have updated the Adobe Acrobat Pro 9 (I'm not even sure this is connected to Adobe Reader but it seems to be since the AdobePDFViewer.plugin was reinserted). None of these things has worked for opening this file.
I am willing to download another browser. Would you recommend Opera or Firefox?
Maybe you are looking for
-
Macbook Pro recording sound from external radio
Hi all, Wondering if anyone can give me some advice on how I can record an external digital radio with my Macbook Pro. As a backgrounder, I am able to do it on my old white Macbook because it has a line-in port, so I just connect a 3.5mm cable from t
-
After a problematic (endless, failed) update from the App Store, I need to delete and maybe reinstall Motion but I can't. Emptying the trash is impossible (left hanging there with a blank progress bar for 12 hours or more...). I tried using Terminal,
-
Help, problem with merging expressions website with dreamweaver
hello, I am hoping you guys have some patience with this question. We created a website with frontpage and it's hosted on an ftp server and we use ftp open and edit the site. My question is, how can I open, work, and edit my site, since it is not eve
-
Dont install the Nvidia System Utility!!
Today i had the great idea to install nvidia's system utility to tweak my ram settings in windows. After that i had a system freeze, no prob normally, but after the restart of my pc, my usb mouse dont work.....i think what ??? ok reboot straight in b
-
Can i use case in query in oracle form 6i
sir can i use case in query in oracle form 6i such as select empno, case when deptno=10 then dptno end from emp; please gice me