Components disappeared after adding the image in.....
Hello everyone,
I add a image in my home page that is in swing .As soon as I add that image the components in another page disappeared.(Componenets like textField ,Label).But when I click on that page, those pages appears. I want to appear all those pages at the first time as they are working before adding the image .
Please tell me the solution on my ID or provide the solution over here.
Thanks
Vivek Kumar Gupta
wht do u mean by pages.. ??
and I should suggest you to use..
validate();
after adding images..
Similar Messages
-
I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!
The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The MAILBOXES category can't be hidden.
In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down. -
I just really need to know... After desigining my UX, how do I go about adding the image into ADOBE FLASH BUILDER to script on top of it?
Any and all advice is welcome.Do you have different versions of the graphic novel pages, or is there just one version of the page? If there is one version, can you crop into the page without losing anything important?
I would guess that there is one version, and that cropping into the page will lose something important. If that's the case, here's how I would handle it:
Make a stage that is 14:9. The size doesn't matter, but 1400x900 could be a good starting point.
Put down a background texture that fits well with the look of the other images. Make that fill the 1400x900 stage.
Place your page graphics so that they are within the center 1200x788 area of the stage.
Set the stage scalemode to "noBorder".
You now have a layout that will work on all devices, as narrow as iPad, and as wide as iPhone 5. All without any code. On the widest devices you'll see a bit of your background pattern to the left and right of the page graphic. On the narrowest devices you'll see a bit of background pattern above and below the page graphic. But you won't lose sight of anything important. -
Values disappear after saving the Purchase Order and Goods Receipt PO
HI,
Our client is using SAP Business One 2007 A(8.00.181) SP 00 PL 47, When they raise Purchase Order for service item, the details and amount disappears automatically after adding the document and similar case for Good Receipt PO. But when they book directly in AP invoice the details and amount will appeared.So please help on solution for the above problem.
Best Regards,
GraysonDear Mr Burton,
If I understood correctly you cannot see the information inside the document you added. This made me think that it is a GUI issue.
In the second answer you specified that when you try to open it again you'll receive the error message saying that there is no total value or total and I assume there is no information in the document.
I believe the second issue is a consequence of the first one.
I was suggesting to open a message on the portal (the message that requires the S number from the partners) in order to investigate the issue better.
However, as you have an error message that pinpoints to certain fields it could be possible to see the information in the tables. Do you have this information?
Regards,
Marcella Rivi
SAP Business One Forums Team -
I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.
Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices. -
My iPad contacts disappeared after adding a contact
My IPad 2 contacts just disappeared after adding a contact. What will I do aside from syncing? Are there any other solutions?
Upon purchase of my iPad 2 I began saving contacts to my IPad Contacts application that is already set up upon purchase of iPad 2. I then learnt about synching ( push ) my Gmail contacts to the Ipad 2 contacts 'exchange'. I did this happily and was very pleased with the results however when synching the first time I chose not to delete my iPad 2 contacts I had began saving upon purchase. This meant upon opening 'contacts' I had three choices 'iPad contacts', 'Exchange contacts' or 'All contacts'. There is no way to save ipad contacts directly to the 'Exchange contacts' it has to be saved into a file or vcard and then imported in using e-mail or a PC.
A few days in to using push/exchange I also added calendar and notes to the push/exchange as I was happy with the contacts and e-mail. I did notice some glitches since doing using push/exchange although I think it began when initially I began pushing contacts/mail there may be a slight chance that it began when I turned on calendar and notes facility to the push/exchange. The glitches that began meant sudden blinking during or after saving in calendar, contacts and notes. Sometimes this would mean the item added was there but also sometimes it would mean that it was not. Also double entries began arriving on both m iPad and in my Gmail Contacts online. These were a mix of contacts that I had and had not not created or edited since acquiring my iPad 2 so the was no pattern or obvious reason. They were all also a mix of contacts from different groups saved in my Gmail contacts.
Today suddenly whilst adding a contact the contacts blinked shut again. I re-opened to see what had happened wondering if my contact had been saved or not however not only did what I add not get saved but all approx 500 contacts from both my iPad contacts and my Exchange Contacts vanished from my iPad 2. I opened and closed the contacts to see if they would return but there was nothing. I also hibernated and then later shut down and restarted the iPad many times to no avail. I checked my Gmail Contacts account and thankfully all my contacts were still there. However, it was still extremely frustrating to have everything vanish from my iPad and then not just come back from there especially as he e-mails and calendar seemed to be still working fine with Exhange/push. Also, why had the contacts saved to the IPad contacts directly vanished also ?!! For a £800 gadget not including accessories it really is unacceptable !!!
Finally what worked for me was going to 'Settings', then going to 'mail,contacts,calendars' and then selecting the 'exchange' account and then switching 'contacts' to 'off', then I selected 'delete' iPad contacts i.e delete the contacts saved in the iPad contacts group however with nothing there to lose this time and having a feeling that perhaps that may have contributed to the issues/glitches and this contacts vanishing I clicked on the 'delete'. I really do have a feeling that perhaps the issues may have been due to having two sets of contacts even though there were only a few there in the iPad before they vanished along with the Exchange contacts. I clicked 'done' and then I didn't hibernate the iPad 2 instead I shut it completely down.
Upon restarting my iPad 2 I went to see if the contacts had returned but unfortunately once again they had not. I returned to 'settings', then 'mail,contacts,calendars' and then selected 'exchange' from accounts and switched 'contacts' back on i.e enabled this once again and clicked done. I then once again switched off ( shut down ) my iPad 2 and waited a while. Upon restarting I again went back to contacts and found some of my contacts finally arrive but not all. My 'push/'fetch' for exchange is set to every 15 minutes and every push/fetch showed me more and more contacts until finally I had all but one which has still not showed up ! However, I am once again happy and this time I only have one contacts group I.e for exchange and no separate iPad contacts to confuse me or iPad. I don't know if this will mean all will be okay now as I do feel like perhaps I cannot now trust iPad contacts and maybe need to print out everything and keep this on me also just in case. I'll keep you posted ! -
A/P Invoice Vendor Ref Number Field updating after adding the Invoice Copy
Hi All,
I am able to change the Vendor Reference number in A/P Invoice Document after adding the Document. I want to restrict this to happen. Plzz help how to do this????
Regards,
Sree.1.The Modify Posted A/P Documents authorization refers to some fields only, e.g. the Due Date or Pay to address.
2. Additional authorization can be defined only for full forms, not for fields.
3. The SP Joseph suggests will refuse those modifications when the Vendor ref is empty.
To avoid modifying the Vendor ref you can use this code:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN
declare @li int
set @li=
(select max(t.LogInstanc)
from ADOC t
where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
IF
(select isnull(t.NumAtCard,'')
from ADOC t
where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
and t.LogInstanc=@li-1)
!=(select isnull(t.NumAtCard,'')
from OPCH t
where t.DocEntry=@list_of_cols_val_tab_del)
begin
Set @error = 10
Set @error_message = N'Vendor refernce not modifiable !'
end
END
Or if you want to allow modifying an unfilled reference, then this:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN
declare @li int
declare @pref nvarchar(100)
set @li=
(select max(t.LogInstanc)
from ADOC t
where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
set @pref=
(select isnull(t.NumAtCard,'')
from ADOC t
where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
and t.LogInstanc=@li-1)
If @pref !='' and @pref !=
(select isnull(t.NumAtCard,'')
from OPCH t
where t.DocEntry=@list_of_cols_val_tab_del)
begin
Set @error = 10
Set @error_message = N'Filled vendor refernce not modifiable !'
end
END -
I purchased my MacBook Air from US in December 2013, my company paid for it, so it got listed under their account earlier. So I asked them to remove it from there account and then I added it back to my profile in January 2014. Then it was listed under My Products tab in the My Support Profile page. Later I bought Apple Care Protection Plan for this MBA, and registered that plan with my MBA's serial number and soon after that, MBA vanished from My Products. I thought it might take some time for it to get listed back again after adding the protection plan, but it didn't appeared for quite a long time and so now I am opening this support ticket.
Now whenever I try to add my MBA again by clicking Register New Product, I am getting "According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other registered products. Not sure if you have another Apple ID?" How can I get my MBA back into my profile?AppleCare does not cover accidental damage, but try taking it to an Apple Store and see what they say!
-
UDF in documents lines that can be Change after adding the doc.
Dear all
How can i create a UDF in documents lines that can be change after adding the doc? He need to mark some of the lines to already audit or not audit and the date of the action.
Kind Regards
MargaridaIt also depends on what documents you are wanting to add these comments to. On documents such as the A/R Invoice/ Delivery, and A/P Invoice/ Goods Receipt PO you cannot change the UDFs on the line item after the document is added (regardless of whether the document is closed). Sales Orders/ Quotes and Purchase Orders line item UDFs can be changed as long as the line hasn't been closed (or partially received/delivered/invoiced).
Hopefully that makes sense. I could give more of an explanation if I knew what documents you were wanting to add these line item comments to. -
even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold eddition.
Hi, Thilina66. You say you have entered the country code but still cannot make international calls. I suppose you are adding the international access code before the country code. This internaltional access code (011 in the US, 00 in Europe, etc.) can be substituted by adding a + sign before the country code.
For example, to call a number in the UK from the US you have to dial:
011 44 7540 267898
or
+44 7540 267898
To call a number in the US from the UK you have to dial:
00 1 212 456 1470
or
+1 212 456 1470
Please check that the contact number in your address book is correctly written if you are dialing directly from the address book or that you enter the correct numbers in the keyboard if you are dialing from the keyboard. -
Image in the pdf disappears after importing the pdf in adobe lcd
1. We are generating certain pdf's from pdf lib (These pdf are also having image ). But, when we open the same pdf in Adobe LCD, the image disappears.Instead of that, we see an empty box.
2. When we import any pdf (having image )into Adobe LiveCycle designer, the image object is there, but there is no image in it. i.e image data is not there.
Need help to resolve this issue. Kindly assist ASAP .Embed image is done on Object>>Draw tab to make it visible use Shift+F7 if it is not visible already.
>>[Gaurav] is it at time of PDF generation ? If so, why are we not able to see image for any other general PDF ?
at original design time the image object may have been defined as imageField item rather than just image item.
As I specified in my previous response it is ok to reassign the images as you intend to make some changes to the forms any way. Though it is additional task it works for your situation.
If you think it is ok to forward copy of PDF you have trouble with I can check the behavior on my machine.....you can forward me at n_varma(AT)lycos.com -
After adding still images, FCE crashed and now I cannot open the file
Anyone know how I can "rescue" my movie? Perhaps some of the images are corrupted but I'm in a Catch 22 since I cannot delete them without opening the file first. My other movies do open, so it appears that overall FCE is working. Hate to lose all this work...
See if you have an +Auto Save Vault+ file thqty pre-dates the crash.
Al -
Changes in Bundle.js file are disappear after restarting the UCM
Good Day,
I add some javascript code in bundle.js file within the following path: domain_home\ucm\cs\weblayout\resources\bundle.js .
the changes are reflected fine on the UCM, but once the UCM Server restated the changes are gone and the file revert back as is; without my changes.
the code that i want to add is:
if ((typeof Range !== 'undefined') && !Range.prototype.createContextualFragment) {
Range.prototype.createContextualFragment = function(html) {
var frag = document.createDocumentFragment();
var div = document.createElement('div');
frag.appendChild(div);
div.outerHTML = html;
return frag;
i want to add it because i have a javascript error like this: Object doesn't support property or method 'createContextualFragment', this erro occured when the used version of Internet Explorer is V.9. ; no javascript errors appears on Version 8. when i add this piece of javascript to the bundle.js file, it the error is gone and everything goes fine, but as i said earlier after restarting the UCM the added javascript code is gone and disappear from the bundle.js file.
For that reason i want to ask, is there is a way to keep my code and stay as is even after restarting? Or is the file uploaded on restart from another path?
Any Suggestions?This is actually quite simple to explain:
- domain_home\ucm\cs\weblayout\resources is a directory that holds runtime version of resources
- if you want to make your changes persistent, you will need to do it in a source directory. In 11g there are two source directories; one for standard components, and the other for custom ones. You should use the latter
- in fact, if you create a custom component with Component Wizard, make your changes there and activate the component, you should be done. The only another thing you should pay attention to is the loadOrder parameter of your resource - it should be higher to get applied.
For more details, see http://docs.oracle.com/cd/E23943_01/doc.1111/e10807/part4_customize_comp.htm#sthref522 -
Background disappears after adding a cross dissolve to a keyed clip.
I have a clip that has a Keying filter (as well as being cropped and scaled down) on it over a white background. After adding a Cross Dissolve to the keyed clip, the white background disappears for the duration of the Cross Dissolve, leaving a black background behind the keyed clip. This black background is present both in preview and after rendering.
Any advice?not positive this will help, but try this:
remove the transition
right-click and sselect "make compound clip" (or Option G)
within the compound clip, drop a white solid under the keyed clip; do not place any transitions at either end of the compound clip.
return to your storyline / sequence
place your transition again and see if it's fixed
if you still do not have a clean dissolve, remove the transition and then click once on the compound clip and go to around 8 or 12 frames before the end and in the inspector, go to the opacity and add a keyframe and then arrow right to the frame before the last frame and add another keyframe and drag the opacity value to zero. -
Old accounts disappeared after adding google account
I have similar problem, after adding new Google account on BB, old account disappeared and all infos are taken from Google and not anymore from Outlook. Then re-created previous account and deleted Google one: no solution, re-installed BB-DTop Mng: managed to retrieve mail, notes, etc. from Outlook but the address book remains only Google one!
How to ERASE Google presence totally?
knottyrope wrote:
there might be a service book that is remaining on device.
Also you can connect to desktop manager and change default address book.
Subject Title edited to reflect new topic.Did you eerase and re-install, then migrate?
s2kip wrote:
However, when I boot with Windows, I can see the directories of my accounts.
Where in the directory structure are they?
Have you looked in /Users to see if a new account was created there?
Maybe you are looking for
-
PO item change is not updated after Delivery completion
Dear All, PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA.
-
Hi there, I'm having trouble connecting a Kodak 3.2 printer to my Mac (Lion OS 10.7.4) - I've tried it on Wifi but no success and the same with usb. The mac is saying Printer not responding. I've followed troubleshoot on the kodak support site and al
-
Create iPod or iPhone Version not working correctly
When I select an MP4 movie and then choose Advanced -> Create iPod or iPhone Version, the movie is converted and a new version is created, but they don't work correctly. In two cases, the resulting file has audio, but the video is missing (just white
-
I talked my sister into getting a iMac 24" 2.16GHz. (Her first Mac) After showing her how to use it, I decided to do a test to see how much speed I would gain if I got one. I brought along a copy of an iMovie/iDVD project on a FW disk and copied the
-
Can I use the iPhone charge to charge N97?
As the title says, can I use the iphone wall charger, connect my data cable to it and charge my N97?