Composer Process Report XML Format

Hi,
We generated 'Process Report' -- XML format in Oracle BPM Composer. After generating saved content in a xml file. When tried to open this file, getting error message like not in proper xml format etc., Have we missed any thing in installing or configuring Composer. pleased suggest.
-- Thanks .... Murthy

@trevorbutler - Could you send us what version of Ant you're using and a sample of how you're using the <junit> Ant task? Additionally, can you validate that the example you gave for the JUnit output is from the <junit> Ant task and not the <junitreport> task? Could you also let us know which version of JUnit you used with Ant, just in case?
FWIW - The XML output that you see from running tests in JUnit via the <junit> Ant task is output that has been defined without specification by the folks at Apache Ant. There has been a lot of discussion on standardizing the output amongst the folks at TestNG, the Maven Surefire plugin and others, but I haven't seen anything standardized come out of that. Here is a wiki page that has some of that discussion http://wiki.apache.org/ant/Proposals/EnhancedTestReports. t's also important to note, that the aggregate results of the <junitreport> task contain a slight variation on the output produced by the <junit> task. Consequently, we have to emulate the lowest common denominator that we know will work with the tools out there that parse the XML output associated with an xUnit framework (e.g. - Ant tasks, CI server, etc). This being said, we rely on the community to keep us up to date with variations that we may have missed or for which need to update. It's not so much that we've decided to exclude any particular elements from the output, we just need help fine tuning as time goes on.
Thanks for the help.
-Brian

Similar Messages

Formatting OBPM Process Report HTML Format

Hi All,
We have developed few processes in Business Process Composer and generated the Process Report HTML format. We found these reports need to be formatted as per our business need and are looking a way to alter/modify the format/layout for these HTML reports. Can any one please suggest how do we configure/alter/format the HTML at source level.
Can any one suggest how to save the generated HTML report.
--- Murthy

Hi,
When I run report( over 28000 pages) with same data set in linux environment then report still run normally.
I can run this report in win2k3 env developer, but my customer can't run it(my customer also use application server 10gr2 in win2k3), number user of my customer is about 150 user.
It isn't still work if I redirect report to another output. And I view Application Server -> Report Server then I see one job is running for a long time.
Report Engine:
Initial Engines (initEngine)     2
Maximum Engines (maxEngine)     2
Minimum Engines (minEngine)     1
Maximum Jobs Before Shutdown (engLife)     50
Maximum Idle Before Shutdown (maxIdle) (minutes)     30
Cache Size (MB)     150
Idle Timeout (minutes)     20
Maximum Connections     20
Maximum Queue Size     1000
Trace Options: none
Trace Mode: trace_replace
Best regards
Thanks.

FL SUI Reporting XML Formatting

Has anyone had any luck with submitting 1st quarter SUI Reports to FL with the new XML format? We have applied a couple of the OSS correction notes and we are still getting errors from the transmission. Hoping to beat the reproting deadline. Any tips to offer?

For whatever reason, our SAP delivered form was not correct. We received this updated file format last week, modified the SAP form, and then copied it to a "Z" form. In addition, we applied the respective notes and have been successful in gettting the file to the State. We receive a "W40" message. We spoke with the State and this is not an issue as we receive a confirmation number.
Dave
Nr     Lct     C     Record description     Field     Tape content     Off     Lth
0000     001          Special Record Indicator          SAP     000     003
0000     004          Character set(ASC or EBC)          ASC     000     003
0000     007          Record Length          275     000     003
0000     010          Insert CRLF?          CRLF     000     004
0000     014          State Name          FL     000     002
0000     016          Layout Type          XML     000     003
0001     001          RECSEQNO          001     000     003
0001     004          Blanks               000     006
0001     010          TransmissionHeader          RBEG     000     004
0001     014          Jurisdiction          FLORIDA     000     007
0001     021          TransmissionId          FLUCTVEN     000     008
0001     029          Timestamp     TMSTP          000     019
0001     048          ETIN          00000     000     005
0001     053          ProcessType          P     000     001
0002     001          RECSEQNO          002     000     003
0002     004          Blanks               000     006
0002     010          OriginHeaders          RBEG     000     004
0002     014          ReturnOriginHeader          RKEY     000     004
0002     018          OriginId          00000000     000     008
0002     026          Timestamp     TMSTP          000     019
0002     045          ItemReference               000     001
0002     046          AgentIdentifier          E     000     001
0002     047     5     AgentIdentifier     E000          000     007
0003     001          RECSEQNO          003     000     003
0003     004          RTXCMP     T5UTL-TXCMP          000     004
0003     008          Blanks               000     002
0003     010          ReturnData          SCHEMA     000     006
0003     016          StateReturn          RKEY     000     004
0003     020          Quarter     QCOUNT          000     001
0003     021          Taxyear     UDATE          000     004
0003     025          SoftwareId          07000133     000     008
0003     033     5     ReturnType          StateUI     000     007
0003     040     5     Form          UCT-6     000     005
0003     045     5     Action          Original     000     008
0003     053          Reason               000     020
0003     073          TypeTIN          FEIN     000     008
0003     081     5     TINTypeValue     E001          000     009
0003     090     5     TypeStateEIN          UIAccountNo     000     011
0003     101     5     StateEINValue     E000          000     007
0003     108          BusinessName     T5UTL-LTEXT          000     057
0003     165          AddressLine     T5UTL-STRAS          000     022
0003     187          City     T5UTL-ORT01          000     022
0003     209          StateOrProvince     T5UTL-STATE          000     002
0003     211          ZipCode     T5UTL-ZIPCD          000     005
0003     216          PhoneNumber     FRMFD-TMTEL     $xml_format$     000     010
0003     226          FirstName               000     027
0003     253          MiddleName               000     027
0003     280          LastName               000     027
0003     307          Phone               000     010
0004     001          RECSEQNO          004     000     003
0004     004          RTXCMP     T5UTL-TXCMP          000     004
0004     008          Blanks               000     002
0004     010     1     UITotalWages     T001     000000000000000     000     015
0004     025     1     ExcessWages     T002          000     011
0004     036     1     UITaxableWages     T003          000     015
0004     051     3     ContributionRate          00.00     000     005
0004     056     1     ContributionDue     T005          000     010
0004     066     1     UIInterest               000     009
0004     075     1     UIPenalty               000     009
0004     084     1     UITotalDue     EXIT     $xml_format$     000     011
0005     001          RECSEQNO          005     000     003
0005     004          RTXCMP     T5UTL-TXCMP          000     004
0005     008          Blanks               000     002
0005     010          Employee          PayRoll     000     007
0005     017          SSN     P0002-PERID     $SSN_NA$     000     009
0005     026          FirstName     P0002-VORNA          000     015
0005     041          MiddleName     P0002-MIDNM          000     001
0005     042          LastName     P0002-NACHN          000     020
0005     062          Suffix     P0002-NAMZU          000     004
0005     066     1     TotalWages     T001     0000000000     000     010
0005     076     1     TaxableWages     T003     0000000000     000     010
0005     086     3     TotalWages          00000000.00     000     011
0005     097     3     TaxableWages          00000000.00     000     011
0005     108          TaxState          XX     000     002
0006     001          RECSEQNO          006     000     003
0006     004          RTXCMP     T5UTL-TXCMP          000     004
0006     008          Blanks               000     002
0006     010     2     NumberOfEmployees     N000          000     007
0006     017     2     Month1Employees     N0M1          000     005
0006     022     2     Month2Employees     N0M2          000     005
0006     027     2     Month3Employees     N0M3          000     005
0007     001          RECSEQNO          ATR     000     003
0007     004          SEQNO          0007     000     004
0007     008          Blanks               000     002
0007     010          OriginManifest               000     001
0007     011          itemCount          1     000     001
0007     012     5     ItemReference          OriginManifest     000     014
0007     026     5     contentLocation          contentLocation     000     015
0007     041     5     ReturnData          Transmission     000     012
0007     053          documentCount          1     000     001
0007     054     5     StateUI          StateReturn     000     011
0007     065          documentId          UCT-6     000     005
0008     001          RECSEQNO          RND     000     003
0008     004          SEQNO          0008     000     004
0008     008          Blanks               000     002
0008     010     5     EFIN          Originator     000     010
0008     020     5     Type          Originator     000     010

FlexUnit report XML format deviates from that of JUnit

Folks,
We are starting to get some mileage from the CI support in FlexUnit4 - thanks to all for the work on this. Currently we are using the CI builds from the FlexUnit Hudson server: FlexUnit4-Flex3.2 Dec14-2009-10.11.11PM. Aside: We tried the RC 1.0, but it does not contain the CIListener SWC or the Ant tasks.
I am having issues getting our in-house CI testing system to process the XML reports generated by FlexUnit4. It was my understanding that FlexUnit4 produced equivalent XML report output as JUnit. However, even when using the debug Flash player, this does not seem to be the case.
Consider the following element from a JUnit produced XML report:
<testsuite errors="0" failures="0" hostname="myhost" name="com.services.publish.test.TestDAV" tests="1" time="7.0" timestamp="2009-04-27T18:00:18">
And this element from a FlexUnit4 generated XML report:
<testsuite name="com.commons.resources.ResourceLoaderTest" tests="9" failures="1" errors="0" skipped="0" time="0.0">
Notice the differences in the attributes specified by JUnit versus FlexUnit4. In particular, JUnit includes "hostname" and "timestamp" attributes, but FlexUnit4 does not. FWIW, FlexUnit4 includes "skipped" which JUnit omits.
Before I check out the latest FlexUnit4 source for the Ant tasks, I was wondering if developers could tell me if there is a reason for the exclusion of hostname and timestamp? In particular, timestamp is crucial for us due to the way our existing reporting dashboard has been designed.
Thanks,
Trevor

@trevorbutler - Could you send us what version of Ant you're using and a sample of how you're using the <junit> Ant task? Additionally, can you validate that the example you gave for the JUnit output is from the <junit> Ant task and not the <junitreport> task? Could you also let us know which version of JUnit you used with Ant, just in case?
FWIW - The XML output that you see from running tests in JUnit via the <junit> Ant task is output that has been defined without specification by the folks at Apache Ant. There has been a lot of discussion on standardizing the output amongst the folks at TestNG, the Maven Surefire plugin and others, but I haven't seen anything standardized come out of that. Here is a wiki page that has some of that discussion http://wiki.apache.org/ant/Proposals/EnhancedTestReports. t's also important to note, that the aggregate results of the <junitreport> task contain a slight variation on the output produced by the <junit> task. Consequently, we have to emulate the lowest common denominator that we know will work with the tools out there that parse the XML output associated with an xUnit framework (e.g. - Ant tasks, CI server, etc). This being said, we rely on the community to keep us up to date with variations that we may have missed or for which need to update. It's not so much that we've decided to exclude any particular elements from the output, we just need help fine tuning as time goes on.
Thanks for the help.
-Brian

Oracle reports in xml format end with stat_low = 6 stat_high = 0

hi
i have a problem with my reports
i have oracle application 11.5.10.2 on linux 32 redhat 4 update 5
after apply the RUP 6
my character_set is :American_America.AR8MSWIN1256
base lang American
install lang ARABIC
when i generate the reports in xml format i get:
Inventory: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
ZMCINVTRREG1 module: ZMC Transaction Register Report
Current system time is 04-AUG-2009 14:32:30
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_BREAK_ID='1'
P_RPT_UOM='2'
P_ORG='223'
P_QTY_PRECISION='3'
P_GLCC_STRUCT_NUM='50289'
P_TXN_DATE_LO='2009/08/04 00:00:00'
P_TXN_DATE_HI='2009/08/04 00:00:00'
P_AUDIT_DETAIL='2'
P_REASON_DETAIL='2'
P_LOC_DETAIL='2'
P_CATEGORY_DETAIL='2'
P_SERIAL_DETAIL='2'
P_LOT_DETAIL='2'
P_CATG_SET_ID='1'
P_CATG_STRUCT_NUM='101'
-- Start of Reports Command --
ar60runb
P_CONC_REQUEST_ID=373985
P_BREAK_ID='1'
P_RPT_UOM='2'
P_ORG='223'
P_QTY_PRECISION='3'
P_GLCC_STRUCT_NUM='50289'
P_TXN_DATE_LO='2009/08/04 00:00:00'
P_TXN_DATE_HI='2009/08/04 00:00:00'
P_AUDIT_DETAIL='2'
P_REASON_DETAIL='2'
P_LOC_DETAIL='2'
P_CATEGORY_DETAIL='2'
P_SERIAL_DETAIL='2'
P_LOT_DETAIL='2'
P_CATG_SET_ID='1'
P_CATG_STRUCT_NUM='101'
report=/oraapp/prodappl/inv/11.5.0/reports/US/INVTRREG.rdf
batch=yes
destype=file
desname=/oraapp/prodcomn/admin/out/PROD_apps/o373985.out
desformat=XML
-- End of Reports Command --
Request language is :
AMERICAN
Request territory is :
AMERICA
XML_REPORTS_XENVIRONMENT is set to:
/oraapp/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Enabling XML_REPORTS_ENVIRONMENT based environment switching
The Character-Set of the System is:
AR8MSWIN1256
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
Converting parameters to UTF-8
-- Start of Reports Command Converted to UTF-8 --
ar60runb
P_CONC_REQUEST_ID=373985
P_BREAK_ID='1'
P_RPT_UOM='2'
P_ORG='223'
P_QTY_PRECISION='3'
P_GLCC_STRUCT_NUM='50289'
P_TXN_DATE_LO='2009/08/04 00:00:00'
P_TXN_DATE_HI='2009/08/04 00:00:00'
P_AUDIT_DETAIL='2'
P_REASON_DETAIL='2'
P_LOC_DETAIL='2'
P_CATEGORY_DETAIL='2'
P_SERIAL_DETAIL='2'
P_LOT_DETAIL='2'
P_CATG_SET_ID='1'
P_CATG_STRUCT_NUM='101'
report=/oraapp/prodappl/inv/11.5.0/reports/US/INVTRREG.rdf
batch=yes
destype=file
desname=/oraapp/prodcomn/admin/out/PROD_apps/o373985.out
desformat=XML
-- End of Reports Command --
XML_REPORTS_XENVIRONMENT is :
/oraapp/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /oraapp/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Previous NLS_LANG Environment Variable was :
American_America.AR8MSWIN1256
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
*** glibc detected *** double free or corruption (!prev): 0x08bf6a78 ***
Report Builder: Release 6.0.8.25.0 - Production on Tue Aug 4 14:32:30 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Reset original NLS_LANG in environment as :
American_America.AR8MSWIN1256
Program was terminated by signal 6
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 373985.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 373985 on node APPS at 04-AUG-2009 14:32:37.
Post-processing of request 373985 completed at 04-AUG-2009 14:32:38.
Finished executing request completion options.
Concurrent request completed
Current system time is 04-AUG-2009 14:32:38
can any one help me with it????

hi,,,
it seems OS package version conflict
Please check glibc and openmotif version (its responsible for reports)
and
Set the environment variable MALLOC_CHECK_=0 and bounce the Concurrent Managers
MALLOC_CHECK_ can be changed in two places :-
1. Add this to the $APPL_TOP/custom<TWO_TASK>_<HOSTNAME>.env
MALLOC_CHECK_=0
Then restart the concurrent managers and retest
2. Change it in the adovars.env file
Again bounce the concurrent managers and retest
THANKS (ZzZ)
Edited by: zzz on Aug 5, 2009 8:59 AM
Edited by: ZzZ on Aug 5, 2009 9:00 AM

How can i save a AWR/statspack report in xml format ??

how can i save a AWR/statspack report in xml format ?? or is there a way...coz when creating the report it gives option for html or normal (sql or txt based file)... on 10.2.0.3

thanks orinet....i used wat you asked me to use...it generated a .dmp file....
sqlplus "/as sysdba"
SQL> @$ORACLE_HOME/rdbms/admin/awrextr.sql
i tired upload that file to orapert.com it gives me below error ...any reason why ??
Error : File not processed because it was too small to be an Oracle statspack or bstat/estat file.
do i need to load it up too ?? as i tried doing the below
sqlplus "/as sysdba"
SQL>@$ORACLE_HOME/rdbms/admin/awrload.sql
get error while doing that....
ERROR at line 1:
ORA-20105: unable to move AWR data to SYS
ORA-06512: at "SYS.DBMS_SWRF_INTERNAL", line 1760
ORA-20107: not allowed to move AWR data for local dbid
ORA-06512: at line 3
the file is about 19M in size
Edited by: user630084 on Mar 19, 2009 11:37 AM

XML format for input to BPEL process from client stub

Hi,
I have deployed SyncHelloWorld BPEL process as given in the tutorial in the BPEL Server. It is working fine. Now I am trying to invoke the process by creating a Java client stub . I created a stub using the Web-services wizard by specifying the WSDL of the BPEL. Now I want to know how to pass some string through XML document to the BPEL process.
I am using this code in the main method of the stub., but the value is not being passed to the BPEL nodes correctly. the output I am getting is "Hello "
and not "Hello XYZString". I think I am not able to form the XML document to pass as input correctly. Can anyone help.
Can anyone please help :
public static void main(String[] args)
try
SyncHelloWorldStub stub = new SyncHelloWorldStub();
// Add your own code here.
// Create an empty XML document
XMLDocument doc = new XMLDocument();
// Create an element
Element body = doc.createElementNS("http://xmlns.oracle.com/SyncHelloWorld", "SyncHelloWorldProcessRequest");
// Create the inner element
Element ip = doc.createElementNS("http://xmlns.oracle.com/SyncHelloWorld", "input");
// Create a text node
Text text = doc.createTextNode("input");
// Set the input parameter
text.setNodeValue("XYZString");
ip.appendChild(text);
body.appendChild(ip);
// Call the process. It returns a vector
Vector v = stub.process(body);
// Code to print the returned xml.
System.out.println("Received " + v.size() + " element");
Enumeration enum = v.elements();
// Walk through the vector and print out contents
while (enum.hasMoreElements())
Object o = enum.nextElement();
System.out.println("Returned a " + o.getClass().getName());
//If it is an element, print it out
if (o instanceof XMLElement)
XMLElement xml = (XMLElement)o;
xml.print(System.out);
else
System.out.println("Returned " + o.toString());
System.out.println("After executing : "+v.toString());
catch(Exception ex)
ex.printStackTrace();
This is the code for WSDL file for the BPEL process.
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions name="SyncHelloWorld" targetNamespace="http://xmlns.oracle.com/SyncHelloWorld" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/SyncHelloWorld" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:client="http://xmlns.oracle.com/SyncHelloWorld">
- <types>
- <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/SyncHelloWorld" xmlns="http://www.w3.org/2001/XMLSchema">
- <element name="SyncHelloWorldProcessRequest">
- <complexType>
- <sequence>
<element name="input" type="string" />
</sequence>
</complexType>
</element>
- <element name="SyncHelloWorldProcessResponse">
- <complexType>
- <sequence>
<element name="result" type="string" />
</sequence>
</complexType>
</element>
</schema>
</types>
- <message name="SyncHelloWorldRequestMessage">
<part name="payload" element="tns:SyncHelloWorldProcessRequest" />
</message>
- <message name="SyncHelloWorldResponseMessage">
<part name="payload" element="tns:SyncHelloWorldProcessResponse" />
</message>
- <portType name="SyncHelloWorld">
- <operation name="process">
<input message="tns:SyncHelloWorldRequestMessage" />
<output message="tns:SyncHelloWorldResponseMessage" />
</operation>
</portType>
- <binding name="SyncHelloWorldBinding" type="tns:SyncHelloWorld">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="process">
<soap:operation style="document" soapAction="process" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- <service name="SyncHelloWorld">
- <port name="SyncHelloWorldPort" binding="tns:SyncHelloWorldBinding">
<soap:address location="http://cisoidd001.corporate.ge.com:5843/orabpel/default/SyncHelloWorld/v2006_06_19__40924" />
</port>
</service>
- <plnk:partnerLinkType name="SyncHelloWorld">
- <plnk:role name="SyncHelloWorldProvider">
<plnk:portType name="tns:SyncHelloWorld" />
</plnk:role>
</plnk:partnerLinkType>
</definitions>
Also, while running the BPEL process from console, we can give the input as html or string. Can anyone give the me xml format of the input.
Any help would be highly appreciated.
Thanks,
Debojyoty

Your last question shows that you might have solved this by now.
The xml document you are composing in java might not exactly be the xml input bpel excepts. The way to compare is first initiate a process by posting an html message, using the initiate tab for your process in the BPEL console. Check the box "Save as default input" before you send the html request.
Then again do an initiate from the BPEL console and select "XML Source" instead of "HTML Form". You will see the xml message you just have sent as html.
You might also want to test your java program with one of the many free soap clients available on the internet.
HTH,
Ruerd
http://www.numericalexample.com

Problem with getting a D2K report in XML format

Hi all,
Could any body give a solution for this problem.
I have a matrix report like following:
Q_Statement_Of_Net_Assets ----> main query
|
G_Cross ----> Cross product
| CS_VALUE
| CS_NET_ASSET
| CF_COSTI
|
| --------------------------------- |
| | G_CTIF | | ------> Like this I have two more groups
| --------------------------------- |
...... |
-----------------------------------------------|
My requirement is i want to print CS_VALUE, CS_NET_ASSET, CF_COSTI values in XML report, these values i am getting in a Normal/RTF format reports.
But i am not getting in XML format report.
thanks in advance.
Vasu

Thanks Schellyc
actually I want to creat a new SOAPMessage for the very beginning like this:
try{
            MessageFactory mf = MessageFactory.newInstance();
            SOAPMessage msg = mf.createMessage();
            SOAPPart sp = msg.getSOAPPart();
            //create the header container
            SOAPEnvelope se = sp.getEnvelope();
            SOAPHeader sh = se.getHeader();
            SOAPBody sb = se.getBody();
        }catch(Throwable e) {
            e.printStackTrace();
        }and I want to get the empty header from this newly created SOAPEnvelop and add my own content into the header as well as the empty body.
I wrote the code by following the example from the jaxm api.
can anybody tell me any further information about the NullPointerException?

Data is not converting in XML format in output while download in report

Hi All, While downloading the report in XML format value '&' is not changing its XML format '&amp', but showing in debug mode and sam thing while download its not showing in output. showing in debug like; MS NA - DCS Tooling & Automation but in output showing the data like: MS NA - DCS Tooling & Automation because of this getting issue. Please help me out . Thanks and Regards Sankil

In that case, it is correct.
Try replacing & with & before downloading xml in case you want & to appear as & in web browser view.

XML reports show in XML format instead of Defult output PDF in R12

I am facing a problem in XML report in oracle R12 ,
when I am running the report ,it through warning msg and output is coming in XML format instead of PDF .
Please let me know the solution.
Zulqarnain

I am facing a problem in XML report in oracle R12 ,
when I am running the report ,it through warning msg and output is coming in XML format instead of PDF .What is the warning message?
Please let me know the solution.Please check the OPP log file for any errors. Also, please post the contents of the concurrent request log file here.
https://forums.oracle.com/forums/search.jspa?threadID=&q=XML+AND+Output+AND+PDF&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Deliver a report in XML format and save it to local file system on the server

We have OBIEE 10.1.3.4 on Redhat linux. We want to have generate a report in XML format and saved it to the server's file system. Did not realize this is s difficult task. Basically
1) How to create a XML report? It is not listed in the output items of a layout template.
2) How to deliver XML the report to local file system. Look into the Delivery section of Admin page. FTP should be the best choice, but does that means that one need to install and run ftp server on the BI server box?
Thanks

Hi,
Since I still have problems on this subject, I would like to share on how it progresses.
Currently I have a problem of timeout in step "Truncate XML Schema" with the URL that I mentioned above.
The exact error is the following : 7000 : null : com.sunopsis.sql.l: Oracle Data Integrator TimeOut : connection with URL [...]
The connection test is still OK.
I tried to increase the value in the user's pref but there's no change.

How to download the report data in xml format

Hi All,
how to download the report data (sql/interactive) in xml format...
Thanks,
Vinoth

You will want to do something like this:
http://spendolini.blogspot.com/2006/04/custom-export-to-csv.html
except customize it for xml.
hth,
John

Large Report in XML Format issue

I am running an Oracle report with an output to XML but I am not getting all the the data. Is there a limit on how much data can be shown in an XML output? Is there a way to get large reports to show in XML Format? We are running Oracle ERS 12 on database 11g. Thank you

I wasn't getting an error at first but now I get the following error:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Not enough storage is available to complete this operation.
I don't have this issue with any other format.
I was wondering how much storage is needed?

Can a ibot send report in xml format? is it possible?

Hi,
When you choose an analysis and want to schedule it you have several option in the drop down menu; however, I have a requirement where I would need to send out the report in an XML format. Is that doable?
Thanks in advance for your response.

Hi SaichandVaranasi,
Well, I need it as the report needs to be scheduled and sent out to a client via email; They use the xml to extract data from us.
As far as getting the static data to show the xml file, it is not working or may be i am unclear on this.
I have enabled the report links and from export i am able to get the xml file generated. Now if i copy the link of the xml output it points to my c drive. (C:\Users\username\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\CCQABWMX\FX_SEF[3].xml)
Once i paste this link to a static view it does not generate the xml view.
in addition even this link is to work, how would it take in the dynamic variable for each day for example where the date range will be changing.
Am i doing it wrong?
Thanks for your suggestion btw.

Oracle Report show in XML Format

Hi to all
I designed one report in oracle EBS R12 and attach one XML Template for output.This report output show properly but when i add this report in Request Set then its output show in XML format instead of attach template.
If any member have its solution so plz send it.
Regards ,
Zulqarnain

Hi Zulqarnain,
You have missing some information.
1. First create report in Report Builder.
2. Generate report in XML format.
3. Now using BI Publisher import XML format report.
4. Add required columns in MS Word with Add in options.
5. Now Save MS File with format rtf.
6. Now using XML Publisher Administrator report add information regarding report information and upload rtf file.
Have enjoy
Edited by: 877432 on Dec 30, 2012 8:15 PM

Composer Process Report XML Format

Similar Messages

Maybe you are looking for