Composing or replying letter space problem in mail

I have been noticing that whenever I compose or reply to a mail when I type the first few words the letter spacing is correct, then about the sixth or seventh word the letter spacing increases. Very weird as I was thinking maybe somewhere I hit a key that increases the letter spacing. But after rebooting I still have the same thing.
any help?
rderd

And in addition to this, I noted another text rendering problem where highlighted mailbox text is displayed very thin when compared to unhighlighted text. Under Medium rendering mode, OS X always renders light text on darker background thicker than it would a dark text on light background.
Compared to:

Similar Messages

Create and Reply Problems in Mail

After upgrading from Panther to Tiger 4.5.5, I can no longer type a new message or Reply to an existing one. I can bring up a new message window, but it will only let me type about 10 letters, and then it beeps at me and won't let me type any more. The same thing happens when I try to forward a message -- it won't let me type above the forwarded message! Thinking maybe it was an installation problem, I reinstalled the 4.5.5 update again, and once again, fixed permissions, but it still doesn't work correctly.
The Reply and Reply All buttons don't work at all as they seem to be non-clickable.
I have no problems receiving mail, and all my mailboxes imported just fine. I also have a .Mac account (it is set up so it shows up in Mail) and seem to have the same problem creating or replying to messages using that account as well. The only way I can reply to a message or create a new one is to use my internet webmail or .mac account.
Has this happened to anyone else? Can someone out there please help me?
Thanks.

Thanks, but that didn't work for me. I threw away my Preferences many times and nothing changed, but that's always a good place to start when you're having trouble with an application. Apple just released (April 4th or 5th) a new Security Update that addresses connectivity problems, so I hope this will help resolve some users' problems. I think the problem was with the last Security Update from Apple (released about 2 weeks ago).
I found another thread at the Apple Discussion Board with subject entitled: Topic: Yet Another Mail User Who Can't Compose or Reply at http://discussions.apple.com/thread.jpsa?threadID=418581. You might want to try reading through some of the suggestions. Apparently, there are quite a few people with the same problem. I have solved my problem by using a cleaning tool called Cocktail and cleaned out both by System and Kernel Caches (see below). First try setting up a new System account (not just a new Mail account). Then open Mail, set your preferences, and try to Send something. If it works, you'll know the conflict isn't the application itself.
You can create a new System account/identity by going to your System Preferences, then choose System - Accounts, and click on the + to add a new account. Be sure to unlock the little lock on the bottom left so you can edit. After you set up the Account, then choose Login Options. I have "Automatically Log in as" checked so this account will come up when I start up my computer.
Mail and TextEdit both worked fine in the new account for me. I don't know if anyone else had trouble with TextEdit, but I had the same type of typing issues as when tyring to compose a new message in Mail. I could type a little, but the spacing would be messed up, or it would just lock up.
My system has now been fixed (Yay!) by cleaning out both the System Cache and Kernel Cache. There are two freeware utility programs that you can download at versiontracker.com (a great source for all kinds of programs) that will do this for you. One is called OnyX and the other is Cocktail. When you open up Cocktail, choose Files, then choose Caches. Check System, User, and Internet. Then press the Options button for more options. I have all the options checked, including Kernel Caches. This application worked for me, but OnyX is a great program that does all kinds of system cleaning and more -- definitely worth downloading. If one doesn't work, try the other.
I don't really know what the conflict was, but cleaning out the caches worked for me, and now everything seems to be back to normal.
I hope this helps. Good Luck.
800 MHz PowerPC G4 Mac OS X (10.4.5)

Cannot compose or reply using yahoo mail with firefox

I have done everything Yahoo says to do which is FF's solution to my problem, but it does not solve the problem
Yahoo mail works fine with IE & CHROME but with FF 33 & 34 it will not allow me to compose or reply to an email!
And the checkboxes with the icons inside have been there for MANY versions.
Sad that I will have to switch to Chrome or IE

I am suddenly having this problem with not being able to
reply/forward to (certain Gmail conversations).
Now using, Mac OS 10.5.8 and experienced the presence of this issue with Firefox 3.6.10. AND 3.6.13 but not with Beta 4.
I have used Safari and the error is not reproducible. This issue is exclusively present to Gmail in FF.
I can confirm that FF config is presently dom.storage.enabled.
I have started FF in safemode, disabled, updated and enabled all plugins and add-ons, restarted FF and desktop many times, the issue is still present in FF 3.6.10/3.6.13.
Only some conversations cause this error. When I click on particular conversations reply/forward tab, the page freezes and the only way to temporarily resolve this, is to click the refresh icon as F5 will not work.
It does not freeze the whole
FF browser, just the window with Gmail.
I need a fix as FF is my primary browser.
Thanks in advance! :-)

I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts.

I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts. The persons name is not in my contacts and I would like to delete it from popping up. Do you know how I can do this?

The Mail app on the iPad/iPhone/iPod Touch does have an option to clear previous recipients. You can learn to live with it. But if you want to get rid of it, the only way to remove these cached email addresses from the Mail application is restoring the iPhone/iPod Touch as a new phone/iPod. If you restore from backup, the cache is also restored.
This article shows you the screens you will see during the restore: http://support.apple.com/kb/HT1414

I am having problems composing and replying to messages in gmail

Firefox just updated to 3.6.12 today, and after that, my gmail stopped working normally. I can no longer compose or reply to messages following this update, however, I can use gmail on my iPhone, so I assume this is an FF issue. I had Buzz disabled for months, which can be an issue, but obviously it had been working with it offline, so I don't think that is an issue in this case. Gmail does appear to work okay in Basic HTML form, following my switching back to that, but I hope this can be resolved so I can use the standard new Gmail as I had with no problem for years. This is the first problem I have ever had with Firefox updates, again, assuming that is the cause. Maybe it's not, but if/when anyone has any info, please reply.
Thanks!

I have had about:config >dom.storage.enabled, set at false for a week or so now. There were no problems until the ff 3.6.12 update yesterday morning when I began having the same problems as all of you. I allowed all scripts, problem persisted so I went back to about:config, toggled dom storage to true and voila, chat and compose started working. Just to check, I switched it back to false and it stopped working. You can use the add-on betterprivacy to autodelete dom storage cookies but it looks like google will no longer allow you to disable them completely.
more on enabling/dis-enabling in firefox, this is for windows but should be the same for other os: http://www.sevenforums.com/tutorials/106540-dom-storage-cookies-enable-disable.html
more on dom cookies: https://secure.wikimedia.org/wikipedia/en/wiki/Web_Storage

.Mac Mail incompatible with Firefox? Also, outgoing mail problems in Mail.

I run Firefox on my Apple as well as on the PC I have to use for work. When I visit my dotmac account and go to my mail, in Firefox on either of these computers, I can read e-mail but cannot respond or compose a new message. When I try to do either of those things, I just get a big empty, blank box that won't let me type in it.
I can compose and reply just fine on Safari.
I've been searching the web for discussion on this, but haven't seen any so I'm starting to wonder if it's something I'm doing wrong. My settings haven't changed, the old .mac mail worked just fine.
Any thoughts?
My second problem, which I believe is unrelated as it only started happening recently is my .mac account within the Mail app will not send mail. I recently had my system crash and had to erase the hard drive and re-install the OS. I saved my data with the Firewire disk mode and my iMac. But ever since, my .mac e-mail refuses to send mail. The User name and password are correct, the outgoing mail server is just like it always was. It tries to send the message then tells me the message can't be sent with the server smtp.mac.com

Try this-
Find Firefox preferences, and be sure that popups are not being blocked.
Not sure about that, but it sounds like popup problems.
In Apple Mail, try entering the smtp server for your ISP (comcast? roadRunner?) some ISP's force you to use their mail servers. (don' tchange anything about POP, just change smtp.mac....to smtp.[ISP's_servers]
Your password may need to be adjusted.
I know you say "like it always was", but something might have changed during your hard drive erasure.

Please help -- Address Book Crashing on Launch, causing problems with Mail

Problem:
Address Book crashes on launch. Mail crashes on launch as soon as it tries to access address book. Can't use either program.
History:
First noticed problem after an out-of-hard-disk space problem. Had about 2 GB left on the 80 GB hard drive in my 1 GHz iMac G4. Was comparing two very large TIFF files in Photoshop when it crashed because it had used up all the available scratch disk space. Mail and Address Book were also open at the time, along with a number of other apps.
After re-starting, Mail began crashing on launch. There had been a message open at the time of the first crash, and it appeared that the crash was happening as soon as Mail went to Address Book to find the sender's image for that message. The crash report showed that Address Book was the thread that failed.
Tried to launch Address Book; crashes on launch.
Both applications refuse to launch.
(Have also noticed that Safari crashes when entering text in a field -- good thing I have an iBook to use to post this plea for help!)
Attempted Solutions:
Scoured these discussions for suggestions.
Trashed preferences, re-started & re-launched; no luck.
Repaired permissions and disk repeatedly until squeaky clean
Used Pacifist to re-install sync services, address book, mail; no luck
Re-run Combo Update PPC 10.4.6; no luck
Have now done a full Archive and Install, re-installed the 10.4.6 combo update and the most recent security update, and verified permissions and disk.
Problem still persists -- which suggests it's something in my User library, I presume, but I'm out of ideas. Very tired and frustrated -- please help!
I've copied the most recent pertinent information from Address Book's Crash Log and posted below. Let me know if I need to post anything else, or logs from other apps. Thanks for taking the time to look into my problem, everyone!
Crash Report:
Date/Time: 2006-06-17 09:21:16.256 -0400
OS Version: 10.4.6 (Build 8I127)
Report Version: 4
Command: Address Book
Path: /Applications/Address Book.app/Contents/MacOS/Address Book
Parent: WindowServer [71]
Version: 4.0.3 (483)
Build Version: 115
Project Name: AddressBook
Source Version: 4830000
PID: 285
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0xe183c1fc
Thread 0 Crashed:
0 ...apple.AddressBook.framework 0x94c85708 c4_FormatB::Define(int, unsigned char const**) + 212
1 ...apple.AddressBook.framework 0x94c82db4 c4_HandlerSeq::Prepare(unsigned char const**, bool) + 372
2 ...apple.AddressBook.framework 0x94c83ae8 c4_FormatV::SetupAllSubviews() + 160
3 ...apple.AddressBook.framework 0x94c851e0 c4_FormatV::Get(int, int&) + 44
4 ...apple.AddressBook.framework 0x94c85150 c4_Handler::GetBytes(int, c4_Bytes&, bool) + 44
5 ...apple.AddressBook.framework 0x94c85108 c4_Sequence::Get(int, int, c4_Bytes&) + 88
6 ...apple.AddressBook.framework 0x94c85058 c4_ViewRef::operator c4_View() const + 76
7 ...apple.AddressBook.framework 0x94c844a4 c4_Storage::Description(char const*) + 96
8 ...apple.AddressBook.framework 0x94c85c04 c4_Storage::GetAs(char const*) + 100
9 ...apple.AddressBook.framework 0x94c86e6c cacheViews + 240
10 ...apple.AddressBook.framework 0x94c811f4 -[ABAddressBook nts_OpenContactManagerWithMode:cacheSchema:] + 452
11 ...apple.AddressBook.framework 0x94c7fd50 -[ABAddressBook nts_InitDefaultContactManager] + 1052
12 ...apple.AddressBook.framework 0x94c7f88c +[ABAddressBook nts_SharedAddressBook] + 76
13 ...apple.AddressBook.framework 0x94c7f7c0 +[ABAddressBook nts_CreateSharedAddressBook] + 76
14 ...apple.AddressBook.framework 0x94c7f6e4 +[ABAddressBook sharedAddressBook] + 80
15 ...apple.AddressBook.framework 0x94c9d990 -[ABUIController setupAsPeoplePicker:] + 300
16 com.apple.AddressBook 0x00008e68 0x1000 + 32360
17 com.apple.AppKit 0x936d3e50 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 928
18 com.apple.AppKit 0x936c003c loadNib + 240
19 com.apple.AppKit 0x936bfa94 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 716
20 com.apple.AppKit 0x93716f64 +[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 156
21 com.apple.AppKit 0x937aa930 -[NSWindowController loadWindow] + 204
22 com.apple.AppKit 0x937aa654 -[NSWindowController window] + 92
23 com.apple.AddressBook 0x00009224 0x1000 + 33316
24 com.apple.AddressBook 0x00008f68 0x1000 + 32616
25 com.apple.Foundation 0x92931ad8 nsnotecallback + 180
26 com.apple.CoreFoundation 0x90803010 __CFXNotificationPost + 368
27 com.apple.CoreFoundation 0x907fb0ec _CFXNotificationPostNotification + 684
28 com.apple.Foundation 0x9291bee0 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
29 com.apple.AppKit 0x936bc338 -[NSApplication _postDidFinishNotification] + 112
30 com.apple.AppKit 0x936bc224 -[NSApplication _sendFinishLaunchingNotification] + 92
31 com.apple.AppKit 0x936bbd6c -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 264
32 com.apple.AppKit 0x936bb914 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 92
33 com.apple.Foundation 0x92932ae4 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 380
34 com.apple.Foundation 0x92932944 _NSAppleEventManagerGenericHandler + 92
35 com.apple.AE 0x914f2960 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 208
36 com.apple.AE 0x914f27fc dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
37 com.apple.AE 0x914f2654 aeProcessAppleEvent + 284
38 com.apple.HIToolbox 0x931db0e0 AEProcessAppleEvent + 60
39 com.apple.AppKit 0x936ba05c _DPSNextEvent + 856
40 com.apple.AppKit 0x936b9b48 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
41 com.apple.AppKit 0x936b608c -[NSApplication run] + 472
42 com.apple.AppKit 0x937a6bfc NSApplicationMain + 452
43 com.apple.AddressBook 0x00008a98 0x1000 + 31384
44 com.apple.AddressBook 0x00008588 0x1000 + 30088
45 com.apple.AddressBook 0x00009f68 0x1000 + 36712

I'm no expert on Address Book, but I can tell you that the files involved in the crash could be HOME/Library/Preferences/com.apple.AddressBook.plist and anything in HOME/Library/Application Support/AddresBook/. It looks like you have ignored this latest folder so far. I would try moving both items to the Desktop, restart, and see whether that stops the crashes.

Has anyone an Intermittent Problem sending mail from Mac OS X (10.6.8)?

I have a Mac mini operating on Mac OS X(10.6.8) Snow Leopard. In the last couple of weeks I have been having intermittent problems sending mail from Mac MAIL, especially if I hit the reply button. It whirls around for ever and then tells me to 'Try Later' or 'Try Again'. When I shut down my computer and open up mail again, I hear the mail whizzing off. I have just tried it now and it went in the time that it has taken me to compose this email. But sometimes the mail doesn't go at all. Could it me because I have too many messages in my inbox and sent boxes (around 1000 in each)? I read somewhere that you should delete Mail in library/pref/com.apple.mail.plst and reinstal it. But I'm frightened to do this in case I can't re-instal it as I don't know how to.

I have a Mac mini operating on Mac OS X(10.6.8) Snow Leopard. In the last couple of weeks I have been having intermittent problems sending mail from Mac MAIL, especially if I hit the reply button. It whirls around for ever and then tells me to 'Try Later' or 'Try Again'. When I shut down my computer and open up mail again, I hear the mail whizzing off. I have just tried it now and it went in the time that it has taken me to compose this email. But sometimes the mail doesn't go at all. Could it me because I have too many messages in my inbox and sent boxes (around 1000 in each)? I read somewhere that you should delete Mail in library/pref/com.apple.mail.plst and reinstal it. But I'm frightened to do this in case I can't re-instal it as I don't know how to.

Problem sending mail from desktop

Hi
I am currently not able to send mail from my desktop. Works fine via web though. The message I get after a period of Mail trying to send message is the following
"The connection to the server 'smtp.mac.com' on port 25 timed out"
If I then run Connection Doctor, the further information I receive is
"Could not connect to this SMTP server. Check your network connection and and that you entered the correct information in the Account preferences".
Any help most welcome.
Thanks

J - Let me describe the issue I had before describing my work-around:
I started getting the message "Could not connect to this SMTP server" only after the upgrade from Tiger to Leopard, and then only when I was trying to send attachments larger than about 50KB. I'm in a rural area, and only have dial-up. I was able to send text messages, and could receive emails with text and attachments, regardless of size.
I believe that it is a Leopard issue in my case. Perhaps not in yours. Certainly you'll want to verify that something hasn't changed in your outgoing SMTP server settings....maybe contact your ISP to verify that they haven't made any changes.
However, if your problem does seem similar to mine, and if you're about to pull your hair out, like I was, you may wish to try what I've done to address this problem:
I have found two work-arounds...both are cumbersome, and I don't believe either is acceptable, but they do work for me. 1) Send mail from your ISP's webmail facility (or gmail, for example) or, 2) I have made a new partition on my disk on which I (re)installed Tiger. (I didn't have the "Could not connect..." issue with Tiger) I can drag attachments or other info into the Tiger partition from my Leopard disk, then restart in the Tiger disk. From Tiger, I can compose and send email from Tiger's Mail app. Good luck! Bill
(I have posted this in other replies also).

Strange Problem with Mail & Address Book

Hi,
I'm having a strange problem with Mail & Address Book.
When I go to compose a new message from Mail and hit the Address button (to show my email addresses), it won't launch the contacts window!
I get this log from console;
2007-10-15 22:55:59.079 Mail[410] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
If I try to launch the Address Book from my Applications folder, it won't open, and it gives me this log from console;
2007-10-15 22:57:57.348 Address Book[417] * -[NSKeyedUnarchiver initForReadingWithData:]: data is NULL
Oct 15 22:57:57 PB-G4 /Applications/Address Book.app/Contents/MacOS/Address Book: CGImageSourceCreateWithData data parameter is nil\n
2007-10-15 22:57:57.350 Address Book[417] Don't know about packed image EditLeftCapStd
2007-10-15 22:57:57.350 Address Book[417] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray addObject:]: attempt to insert nil
If I quit Address Book, i'll get this from console;
2007-10-15 22:58:37.892 Address Book[417] -[ABAddressBook setDefaultCountryCode:] called with a unknown country code 'us'
I tried deleting the preferences, re-installing Address Book, also tried creating a new user, again no luck!
Can somebody help!!!
Please?!

Hi dp13.
Do you have any Address Book plug-ins or system utilities that could interfere with Address Book? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/Address Book Plug-Ins/
~/Library/Address Book Plug-Ins/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/Address\ Book\ Plug-Ins ~/Library/Address\ Book\ Plug-Ins
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.
<hr>
Did you also reinstall the appropriate Combo Update after reinstalling Address Book?
Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Having connection problems with Mail after installing 10.9.4

I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Having problems with mail on my iPad 3rd gen

Hi.
I seem to be having problems with mail on my iPad. Every few days I go to open mail and go open an email and I go to try and delete it or send a reply or compose a new mail and thus I tap the icon but mail will not do anything.
I can open emails but not send or delete them.
Sometimes it works when I just close mail and reopen it but sometimes I have to restart my iPad multiple times. Doesn't matter which email account.
Any help would be appreciated

Hello there erika274,
It sounds like no matter what contact you put into the 'To' field, a different name appears, but the email makes it to the intended recipient. I would recommend a few things here. First, close all the open apps on the device:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Cheers,
Sterling

Bizarre typing problem in Mail

I have been finding this intermittent problem typing a reply to an email in Mail. When I mistype a word, auto correct fixes it, but then deletes the space before hte word and joins it up to the previous word, so I keep having to go back and add a space. Here is a link to a screen grab video that shows exactly what happens: http://youtu.be/RvknuXh-OAc
Here are some particulars about when it happens.
Only when typing a reply to an email and while typing in the body of the senders email message. Typing above, in the normal reply area, no problem. That is, when you give notes and say, "see below" and then type answers to their questions in their message area.
Not every email exhibits this problem, but many do.
I forwarded this email to other people and the problem sticks to the email. Opened it on other computers and also on Outlook on a Mac and the problem persists, but only in that email. It's as if the problem is part of the email message itself.
As above, not specific to any one computer, so not to do with the user or plug ins or whatever.
Never have this problem in Outlook (which I used to use). Only Mail.
If I were to type slowly so that the auto correct balloon had time to appear, it does not delete the space. Of course, I don't type slowly so that is not a fix.
It appears that it is related to the way the auto-correct works, but only in the body of the reply, not in a reply above or an original email. If I turn auto-correct off, it does not do this.
So this is a big mystery to me and really annoying when I am replying to an email and trying to type quickly. Very strange. Hope someone has an idea what it could be.
Thanks!
P.S. Had to post the video on Youtube because the Insert Video button here is greyed out. Not sure why.

From the menu bar, select
Edit ▹ Substitutions
and uncheck Text Replacement.

I just spent an hour composing a reply in a thread ("Firefox will not work with paypal"), only to see "You don't have permission" at Submit - total loss!

I was logged in to reply in the thread "Firefox will not work with paypal". I spent the better part of an hour carefully composing that reply, testing cases, providing links, etc... [Hint: Firefox, unlike other browsers, has a problem with scripts from server paypalobjects.com.] Because I had taken so long to compose the reply, it seemed like a good idea to check it via the Preview button, but I got a message that that function was not available. Of course I decided to submit it anyway, but when I hit "Submit" I got a message "You don't have permission ..." - at which point I was (stupidly) on a different page with that message, and everything I had composed was gone!

It might be too late for this, but it's what I use when this happens. Prepare for deep nerdom:
* Open the web console below the error page by pressing Ctrl+Shift+k
* Right-click the blank area and turn on logging of the request and response bodies
* Resubmit the request by clicking the reload button
* Click the new URL that appears to open the viewer showing the headers and bodies
There you may be able to copy out the content of your post from the Request Body. You can use a word processor or text editor to find/replace the + characters back to spaces.

Since installing mountain lion i have a problem with mail. when i delete a message close and open mail the message has come back. please help!

Since installing Mountain Lion i have a problem with Mail. I delete a number of messages from the same person but keep the newest message in my Inbox. I actually delete them from the Trash. The next time i open Mail the deleted messages are back again. Can anybody please help as this is getting annoying. Thanks in Anticipation.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

Composing or replying letter space problem in mail

Similar Messages

Maybe you are looking for