Composition Emvironment load test monitoring

While doing a load testing on CE we face an error with one application in the integrated Portal screen. Can anybody please guide me for what are all to be monitored from the Netweaver of CE and SAP MMC console. By the monitoring we need to figure out what causes the problem during the load test.
Thanks a ton..I appreciate your help

Hi Denial,
Check the log file defaultTrace.#.trc from this location /usr/sap/SID/j2ee/cluster/serverX/log/defaultTrace.#.trc in server.
Regards,
Arun

Similar Messages

CE system load test monitoring

While doing a load testing on CE facing an error with one application in the integrated Portal screen. Can anybody please guide for what are all to be monitored from the Netweaver of CE and SAP MMC console. By the monitoring need to figure out what causes the problem during the load test.
Thanks a ton.I appreciate all your valuable help

Hi Denial,
Check the log file defaultTrace.#.trc from this location /usr/sap/SID/j2ee/cluster/serverX/log/defaultTrace.#.trc in server.
Regards,
Arun

How to monitor Http Request and Response when load testing is going on

Hi,
can any one please let me know how to monitor http request sent and response received for each virtual ID when a load test is going on ?
Thanks,

You used to be able to see what the VUs "see" using the "VU Monitor" (it would only do a simple rendering of the HTML but it served it's purpose). However this was replaced (in v12 I think?) by the "VU Log". While this offers simlilar functionality, I have had problems getting to see the same level of detail. You may need to use the "debug" modes. Also check the "Content" tab within the VU Logs (it is the closest equivalent to the HTML you would see in the responses in the old VU Monitor).

Proxy issue in OpenScript Load Testing Protocol(Web/HTTP) during PlayBack

Hi All,
I am new to OATS and I recorded a sample script on OATS for Load Testing protocol(Web/HTTP) in OpenScript but when I Playback it then it is giving the following as the result:
"*Invalid response received from proxy server: HTTP/1.1 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). ).*
*Comparable WinInet error code: Error 12033: ERROR_INTERNET_INVALID_PROXY_REQUEST.*"
In ErrorLog following errors are mentioned:
"*eclipse.buildId=unknown*
*java.version=1.6.0_07*
*java.vendor=Sun Microsystems Inc.*
*BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_IN*
*Command-line arguments: -os win32 -ws win32 -arch x86*
*Error*
*Thu Apr 25 12:00:17 IST 2013*
*fireActiveProjectChanged*
*java.lang.IllegalStateException: Error getting Parent Element Id for element-id: 9*
*     at oracle.oats.scripting.models.store.util.db.ModelDBPersistence.getElementParentId(ModelDBPersistence.java:283)*
*     at oracle.oats.scripting.models.stores.database.DatabaseStore.getParentId(DatabaseStore.java:287)*
*     at oracle.oats.scripting.models.stores.database.ResultOverviewStore.getParentId(ResultOverviewStore.java:550)*
*     at oracle.oats.scripting.models.ModelElement.getParentId(ModelElement.java:275)*
*     at oracle.oats.scripting.models.ModelAccessor.findParent(ModelAccessor.java:146)*
*     at oracle.oats.scripting.models.ModelElement.findParent(ModelElement.java:289)*
*     at oracle.oats.scripting.ui.views.results.ResultsContentProvider.getParent(ResultsContentProvider.java:49)*
*     at org.eclipse.jface.viewers.AbstractTreeViewer.getParentElement(AbstractTreeViewer.java:1646)*
*     at org.eclipse.jface.viewers.TreeViewer.getParentElement(TreeViewer.java:601)*
*     at org.eclipse.jface.viewers.AbstractTreeViewer.internalExpand(AbstractTreeViewer.java:1573)*
*     at org.eclipse.jface.viewers.AbstractTreeViewer.setSelectionToWidget(AbstractTreeViewer.java:2456)*
*     at org.eclipse.jface.viewers.StructuredViewer.setSelectionToWidget(StructuredViewer.java:1680)*
*     at org.eclipse.jface.viewers.AbstractTreeViewer.setSelectionToWidget(AbstractTreeViewer.java:2864)*
*     at org.eclipse.jface.viewers.StructuredViewer.setSelection(StructuredViewer.java:1636)*
*     at org.eclipse.jface.viewers.TreeViewer.setSelection(TreeViewer.java:1104)*
*     at oracle.oats.scripting.ui.views.results.ResultsDisplayView.setSelection(ResultsDisplayView.java:584)*
*     at oracle.oats.scripting.ui.views.results.ResultsDisplayView.onActiveScriptingProjectChanged(ResultsDisplayView.java:266)*
*     at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry.fireActiveProjectChanged(OpenScriptEditorRegistry.java:377)*
*     at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry.access$8(OpenScriptEditorRegistry.java:371)*
*     at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry$EditorListener.partActivated(OpenScriptEditorRegistry.java:121)*
*     at org.eclipse.ui.internal.PartListenerList2$1.run(PartListenerList2.java:68)*
*     at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)*
*     at org.eclipse.core.runtime.Platform.run(Platform.java:880)*
*     at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)*
*     at org.eclipse.ui.internal.PartListenerList2.firePartActivated(PartListenerList2.java:66)*
*     at oracle.oats.scripting.ui.internal.TailoredPartService.firePartActivated(TailoredPartService.java:310)*
*     at oracle.oats.scripting.ui.internal.TailoredPartService.setActivePart(TailoredPartService.java:344)*
*     at org.eclipse.ui.internal.WWinPartService.updateActivePart(WWinPartService.java:124)*
*     at org.eclipse.ui.internal.WWinPartService.access$0(WWinPartService.java:115)*
*     at org.eclipse.ui.internal.WWinPartService$1.partDeactivated(WWinPartService.java:48)*
*     at org.eclipse.ui.internal.PartListenerList2$4.run(PartListenerList2.java:113)*
*     at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)*
*     at org.eclipse.core.runtime.Platform.run(Platform.java:880)*
*     at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)*
*     at org.eclipse.ui.internal.PartListenerList2.firePartDeactivated(PartListenerList2.java:111)*
*     at oracle.oats.scripting.ui.internal.TailoredPartService.firePartDeactivated(TailoredPartService.java:323)*
*     at oracle.oats.scripting.ui.internal.TailoredPartService.setActivePart(TailoredPartService.java:338)*
*     at org.eclipse.ui.internal.WorkbenchPagePartList.fireActivePartChanged(WorkbenchPagePartList.java:56)*
*     at org.eclipse.ui.internal.PartList.setActivePart(PartList.java:126)*
*     at org.eclipse.ui.internal.WorkbenchPage.setActivePart(WorkbenchPage.java:3491)*
*     at org.eclipse.ui.internal.WorkbenchPage.requestActivation(WorkbenchPage.java:3034)*
*     at org.eclipse.ui.part.MultiEditor.activateEditor(MultiEditor.java:178)*
*     at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditor.activateEditor(OpenScriptEditor.java:1247)*
*     at org.eclipse.ui.part.MultiEditor$1.handleEvent(MultiEditor.java:81)*
*     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
*     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
*     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)*
*     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1008)*
*     at org.eclipse.swt.widgets.Shell.setActiveControl(Shell.java:1353)*
*     at org.eclipse.swt.widgets.Control.sendFocusEvent(Control.java:2443)*
*     at org.eclipse.swt.widgets.Widget.wmSetFocus(Widget.java:2266)*
*     at org.eclipse.swt.widgets.Control.WM_SETFOCUS(Control.java:4414)*
*     at org.eclipse.swt.widgets.Tree.WM_SETFOCUS(Tree.java:6846)*
*     at org.eclipse.swt.widgets.Control.windowProc(Control.java:3855)*
*     at org.eclipse.swt.widgets.Tree.windowProc(Tree.java:5791)*
*     at org.eclipse.swt.widgets.Display.windowProc(Display.java:4528)*
*     at org.eclipse.swt.internal.win32.OS.SetFocus(Native Method)*
*     at org.eclipse.swt.widgets.Control.forceFocus(Control.java:974)*
*     at org.eclipse.swt.widgets.Control.setFocus(Control.java:2811)*
*     at org.eclipse.swt.widgets.Composite.setFocus(Composite.java:927)*
*     at oracle.oats.scripting.ui.editors.tree.TreeEditor.setFocus(TreeEditor.java:230)*
*     at org.eclipse.ui.part.MultiEditor.setFocus(MultiEditor.java:139)*
*     at org.eclipse.ui.internal.PartPane.setFocus(PartPane.java:325)*
*     at org.eclipse.ui.internal.EditorPane.setFocus(EditorPane.java:127)*
*     at org.eclipse.ui.internal.PartStack.presentationSelectionChanged(PartStack.java:846)*
*     at org.eclipse.ui.internal.PartStack.access$1(PartStack.java:829)*
*     at org.eclipse.ui.internal.PartStack$1.selectPart(PartStack.java:139)*
*     at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:133)*
*     at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)*
*     at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:276)*
*     at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder.access$1(DefaultTabFolder.java:1)*
*     at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder$2.handleEvent(DefaultTabFolder.java:87)*
*     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
*     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
*     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)*
*     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)*
*     at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)*
*     at org.eclipse.swt.custom.CTabFolder.setSelection(CTabFolder.java:3242)*
*     at org.eclipse.swt.custom.CTabFolder.onMouse(CTabFolder.java:2017)*
*     at org.eclipse.swt.custom.CTabFolder$1.handleEvent(CTabFolder.java:320)*
*     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
*     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
*     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)*
*     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)*
*     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)*
*     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)*
*     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)*
*     at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)*
*     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)*
*     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)*
*     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)*
*     at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)*
*     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)*
*     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)*
*     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)*
*     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)*
*     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)*
*     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
*     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)*
*     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)*
*     at java.lang.reflect.Method.invoke(Method.java:597)*
*     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)*
*     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)*
*     at org.eclipse.equinox.launcher.Main.run(Main.java:1236)*
*     at org.eclipse.equinox.launcher.Main.main(Main.java:1212)*
*Caused by: oracle.oats.utilities.db.exceptions.DisconnectDbException: Verify if database connection exists for C:\OracleATS\OFT\iTube3\results\Session3\data*
*     at oracle.oats.utilities.db.JavaDbSystem.executeQuery(JavaDbSystem.java:335)*
*     at oracle.oats.utilities.db.core.ElementDao.selectParentId(ElementDao.java:215)*
*     at oracle.oats.utilities.db.DatabasePersister.getParentIdFor(DatabasePersister.java:89)*
*     at oracle.oats.scripting.models.store.util.db.ModelDBPersistence.getElementParentId(ModelDBPersistence.java:278)*
*     ... 104 more*
*Caused by: java.sql.SQLNonTransientConnectionException: No current connection.*
*     at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException(Unknown Source)*
*     at org.apache.derby.impl.jdbc.Util.newEmbedSQLException(Unknown Source)*
*     at org.apache.derby.impl.jdbc.Util.newEmbedSQLException(Unknown Source)*
*     at org.apache.derby.impl.jdbc.Util.noCurrentConnection(Unknown Source)*
*     at org.apache.derby.impl.jdbc.EmbedConnection.checkIfClosed(Unknown Source)*
*     at org.apache.derby.impl.jdbc.EmbedConnection.setupContextStack(Unknown Source)*
*     at org.apache.derby.impl.jdbc.EmbedConnection.prepareStatement(Unknown Source)*
*     at org.apache.derby.impl.jdbc.EmbedConnection.prepareStatement(Unknown Source)*
*     at oracle.oats.utilities.db.util.SQLUtils.prepare(SQLUtils.java:307)*
*     at oracle.oats.utilities.db.StatementFactory.makeStatement(StatementFactory.java:20)*
*     at oracle.oats.utilities.db.PreparedStatementCache.addStatement(PreparedStatementCache.java:38)*
*     at oracle.oats.utilities.db.JavaDbSystem.executeQuery(JavaDbSystem.java:316)*
*     ... 107 more*
*Caused by: java.sql.SQLException: No current connection.*
*     at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException(Unknown Source)*
*     at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA(Unknown Source)*
*     ... 119 more*
And in Debug tag I am getting the following errors:
*"<disconnected>org.eclipse.equinox.launcher.Main at localhost:59115"*
I am working with OATS on company network and also I am using the correct proxy setting(confirmed). When i tried recording a company internal web application(No Proxy Required) its still giving same proxy errors.
Error results are always changeing when I change my Port No. for proxy setting (Default Port No for my network is 8080).
For port No 8080 following error is displayed result tab:
*"Failed     HTTP response code: 407 Proxy Authentication Required ( Access is denied. )      "*
For port no 7777 & 443 following error is displayed in the result tab: (Have changed the proxy server address to "xyz"):
*Failed     The attempt to connect to the server xyzproxy.xyz.com on port 7777 failed.*
*Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.ConnectException occurred. Error Message:Connection timed out: connect*
I have just disabled the cookies from my script, no other changes have been made(no parametrization and no correlation as of now).
I have tried everything with port numbers and also with Playback settings in openscript preference for proxy, tried to playback the script with proxy, without proxy for both the type of applications, company internal and external but still the same errors.
Anyone please suggest me a solution to this problem.
Thanks,
Abhi.
Edited by: 1002084 on Apr 25, 2013 12:12 AM

Hi,
I think your password is encrypted. Try replace password "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with your password.
Or Get output of obfuscate("your password") and replace "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with {{@deobfuscate( output of obfuscate("your password") )}}
Regards,
Deepu M

MythTV Program Guide Slow/No Composite Effects On Dual Monitor

Hello all,
I am not entirely sure where this would belong, so I put it here.
I am running Arch64 with an NVidia 8600GTS and dual monitors as seperate X screens. The second monitor is actually a TV not a monitor, and is using the S-Video output on the video card, but I'm not sure that that's relevant at all.
On my primary monitor the program guide in MythTV runs fairly decent, however on the TV it runs unbearably slow. Pushing up on the remote a time or two will take a minute or so to happen. I have it set to the least demanding level possible.
I originally thought that this was just a MythTV issue but I noticed that XCompmgr and Compiz-Fusion effects do not work at all on the TV either, so I think these issues are related.
Also, I do not currently have a composite window manager installed, I am using Gnome with Metacity.
Here is a copy of my xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Jan 6 09:43:54 PST 2009
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# Serial Mouse not detected
# USB Mouse not detected
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 16
Option "TwinView" "0"
Option "metamodes" "DFP: 1680x1050 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
SubSection "Display"
Depth 16
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 16
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 16
EndSubSection
EndSection
It's a bit of a mess at the moment. Last time I reinstalled I was having trouble with the keyboard and mouse not working in Gnome, so I've been hesitant to mess with it too much.
On my previous install my xorg.conf looked like this:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder58) Wed Oct 1 15:13:37 PDT 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Thu Jul 17 18:39:00 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
# RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "True"
Option "NoRenderExtension" "False"
Option "AllowGLXWithComposite" "True"
Option "XvmcUsesTextures" "True"
Option "LoadKernelModule" "True"
Option "DamageEvents" "True"
# Option "LogoPath" "/home/theavataroftime/Pictures"
Option "NoLogo" "True"
Option "TwinView" "0"
Option "metamodes" "DFP: 1680x1050 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "RenderAccel" "True"
Option "NoRenderExtension" "False"
Option "AllowGLXWithComposite" "True"
Option "XvmcUsesTextures" "True"
Option "LoadKernelModule" "True"
Option "DamageEvents" "True"
Option "LogoPath" "/home/theavataroftime/Pictures"
Option "NoLogo" "True"
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
I had the same issues with composite managers and that MythTV guide using this xorg.conf too.
Has anyone had any similar issues? I am at a total loss here, so any help is greatly appreciated. Thank you.

No one else has had troubles with the program guide or composite effects on dual monitors?

Whats the best way to load test?

So our app is ready for prime time and we are concerned about response times whether we will survive 100 simultaneous users.
It would be additionally useful if I knew how many users we could tolerate simulataneously.
I attempted running jmeter but I didn't spend a lot of time with it and it didn't overwhelm me with information.
I get the sense that I would probably have to spend a couple weeks to really create useful, valid test simulations which I didn't have time for.
Also, is it even legitimate? The fact that it is one single machine trying to simulate a hundred users on distributed machines?
So, I really lacked a lot of confidence in my test.
In fantasyland it would be great, if say there were some distributed google cloud machines that could simulate 100 users and start firing away at my app.
Starting at 10 users and ramping up until no longer responsive and then providing those results.
The fact is I don't have a lot of experience with this and would appreciate insight.
Also, it just occurred to me that this is an internal app inaccessible from outside the organization.
Does anyone have something they might consider the holy grail of load testing or good advice? Thx.

If you have money to spend, I would recommend using Oracle's Application Test Suite (ATS) since it is the only test tool I know of that allows you to create a functional test and then convert it to a load test. The capabilities of this tool are pretty amazing considering that it is a single tool where the go to toolset in the past was Win Runner / Load Runner. With Win Runner, you needed 50 machines (or VMs) if you wanted to generate front end load for 50 users. With ATS, you record a script with your browser, and then convert it into a load test. You can adjust things like think time, ramp up time, sustained load, etc.
What a lot of people miss is that testing tools can be used indefinitely, not just for getting through a migration. If you script your tests appropriately (which means that your user base trusts them), you can use them for every code release because it takes very little effort to run a test script. On top of that, you can set up strategically placed machines around your network that are set up to run a specific test script (think of a common transaction) so that performance metrics can be captured. I worked for a company that had 160 locations around the world and we used our testing tool as a performance monitor in the locations with the worst performance. Having a tool allowed us to see whether our performance issues were related to network, database, app servers, etc. This took the burden of explaining performance issues off of the users. Most users can't really articulate what the problems are anyway (and they aren't expected to).
If budget is an issue, you can use JMeter from Apache, which will give you the load testing capability but you will miss out on the excellent reporting and management capabilities of the Oracle Application Test Suite.

OATS distributed load test agents

Hi,
1) I am preparing to perform a distributed load test on web application. full load is 500 users.
How many agent test servers do I need for this test?
How do i determine the number of servers, as I can't find any best practices or guide online.
2) Is there limitations on the full OATS download via oracle website? i heard that its a 30 day trial but its not stated anywhere of the 30 days limitation.
Joseph

Hi
You don't need to install the data collector in the servers, you can access then remotely using JMX in case of weblogic or JDBC in case of the DB.
You only need to install the agent in the server if you have a close DMZ as then you only need to open the port for the data collector (think is 9001) to the controller instead of opening all the ports needed for monitoring.
Even getting server OS level stats for uinx type servers the datacolector will open an SSH connection and gather the stats, and for windows it can connect remotly using perfmon.
*Note that perfmon uses dynamic ports making it very difficult to guarantee network connections.
Regards
Alex

Oracle Load Testing - Metrics

Hi,
I'm new to Performance Testing.Which of the common metrics reading (in network,in database,in webserver,network,system etc.) would help me if i conduct a test to check the performance of the three tier application structure.I want to make sure that it is enough to handle the application.
Thanks,

For a good start, you could follow the methodology described here : http://www.oracle.com/technetwork/oem/grid-control/overview/wp-rapid-1.pdf
Then, you could monitor CPU/Mem/io for each server and depending on your environment, maybe to monitor closely the DB & the middle tier.
If it is Oracle DB & WLS, we do recommand to use Oracle Enteprise Manager to monitor the environment and then to gather metrics (for example AWR/ADDR report or JVM diagnostic) from OEM to Load Testing console.
JB

Who knows RSW? Is it a good load test tool?

Thanks a lot.

We have used RSW eTest for load and functional testing on several projects
and had an excellent experience. It is easy to set up and monitor. We
procured the software and hardware for both mock production and test
environments, set up the environments, wrote the test scripts, ran several
200 VU load tests and monitored and documented the results in five days.
We have also used Silk Test to run a 3000 VU loa test. Silk was difficult
to set up and was a resources hog.
"Tao Zhang" <[email protected]> wrote in message
news:3a71a6e4$[email protected]..
>
Thanks a lot.

Unable to capture the D4OSESSION during LOAD testing??

Hi,
Summary:
---------- I am doing the performance testing of the 50 concurrent users using one of the third party load test tool.But that tool is not able to capture the opening workbook sessions.
Detail
----------- Normally when I open a D4O session in the URL from the client machine in the database I saw the 3 sessions in v$session table.
2 sessions from Application Server.
1 Session from client machine.
the protocol that I used to open the D4OSession is HTTP
When I Choose any workbook from the opened d4osession in the V$session table the session from the client machine status becomes active.
so for the single d4o session oracle opening 3 session in the database.
Under this calculation I try to record the session for the performance testing using one of the third party tool called QA LOAD. I am unable to record all the 3 session,
I am able to record the application server sessions only ie.2 session ,but I am unable to record the session from Client machine.(User session is coming only when I opens the workbook)
I am not able to understand why the tool is not able understand d4osession protocol??
What could be the problem. Why I am not able to capture the d4osession when I opens the workbook.???? . Without using the tool I can able to see the all 3 sessions.
Actually the goal is to do a performance testing for 50 concurrent users.Its very difficult to do performance testing without a performance test tool...
Normally this tool can understand all kind of javabased application,Microsoft applications but I am not sure why it won't understand part of the d4osessions???
Even when I ry to capture this opening workbook session using winsock protocol also...but no luck!!!!.
Any advice/ Idea....Please post it !!!!
Eg: ---------------
Details of the d4o session
---------------------------- d4osession user : user1
Workbook name : workbook1
URL : http://applicationserver:7778/discoverer/plus?us=user1&lm=olap......
Browser : Internet Explorer 6.0
Database : Oracle 10G
Discoverer plus for olap : 10.1.2.48
Load Test tool : QA LOAD
Database OS : Linux
Application Server OS : Windows.
Thanks,
Nats

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to capture the Citrix network response time using OATS Load testing.

Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Load Test Results - time series request data for by URL in VS2013

I am trying to figure out how to export and then analyze the results of a load test, but after the test is over it seems I cannot find the data for each individual request by url. This data shows during the load test itself, but after it is over it seems
as if that data is no longer accessible and all I can find are totals. The data that I want is under the "Page response time" graph on the graphs window during the test. I know this is not the response time for every single request and is probably
averaged, but that would suffice for the calculations I want to make.
I have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
My goal is to plot (probably in excel) each request url against the user load and analyze the slope of the response time averages to determine which requests scale the worst (and best). During the load test I can see this data and get a visual idea but when
it ends I cannot seem to find it to export.
A) Can this data be exported from within visual studio? Is there a setting required to make VS persist this data to the database? I have, from under Run Settings, the "Results" section "Timing Details Storage" set to "All individual
details" and the Storage Type set to "Database".
B) If this data isn't available from within VS, is it in any of the tables in the LoadTest2010 database where all of the summary data is stored?
Thanks
Luke

Hi Luke,
Since the load test is used to
simulate many users accessing a server at the same time, it is mainly verify a wev server load stress.
As you said that you want to find the data
for each individual request by url, I know that generally we can analyze the url request from the Summary like the following screen shot.
>>I
have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
I suggest you can try to add the
SQL Tracing Connect String in the Run Setting properties to trace the data.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/74ff1c3e-cdc5-403a-b82f-66fbd36b1cc2/sql-server-tracing-in-visual-studio-load-test?forum=vstest
In addition, you can try to create an excel to analyze the load test result, for more information:
http://msdn.microsoft.com/en-us/library/dd997707.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to set Proxy for IE 8.0 on doing Load Testing with OATS 12.1.0.2

I have tried adding proxy server by adding the address to "Localhost" and Port as 8080.
but nothing is working out, for recording an EBS instance its working fine ,no need to setup anything in the OATS tool, eg, Proxy settings.
But when it comes to BPM with ADF technology , the recorder is not starting the Recording even the pointer navigation also not wokring.
So, is there way to record the ADF applications in BPM ?
Thanks in advance.

Hi Wayne,
Thing is do we need to add the proxy server here?, as for doing Load testing on EBS application,there is no need of adding a proxy server,
So the same way it should work with the ADF application too, but its not showing any mouse pointer in the Browser tool bar or recording
the navigation.
Point to be noted is, we need to connect to VPN in order to access the Application.
is it because of VPN connection that its not recording?
But while doing the functional testing I didn't face anyproblem though as its recording everything even if we are connected to VPN.
In Functional testing also i found ,all the input fields where we add the "username" or any input data via a "text box" the tool is not able to
record the field information along with the input we enter.
If you could let me know ,how to do a Load testing for ADF application using BPM , it would be helpful
Thanks
Atish

Load testing of Web ADI in EBS R12

Hi,
I am currently testing Oracle E-Business Suite R12. Has anyone load tested the Web ADI integrator for Oracle EBS R12? What tool did you use?
Did you use QTP or Oracle ATS functional testing? I was not able to do a POC using LoadRunner or OATS load test tool.
Basically Web ADI is an integration that allows data to be uploaded/downloaded between Oracle EBS R12 and local excel.
Any help is appreciated.
Regards
CP
Edited by: oracletest on 14-May-2012 07:17

Hi,
I have found that OATS does not work easily with Web ADI in my case.
Regards
CP

Load testing with concurrent users on HTTP Web

Hello,
I am trying to do load testing my PHP Web Application.
I record (with Firefox) and developed the testing script with OpenScript,
but I found that I could only test with "Iteration" feature.
Is there any way to do load testing with concurrent users ( multi users login at the same time ) which defined in databank?
Thanks for help.

Hi
You need to load the script into OLT (Oracle Load Testing) you can download it from here you need the first link Oracle Application Testing Suite and run the OATSxxx.exe to install OLT.
Regards
Alex

Composition Emvironment load test monitoring

Similar Messages

Maybe you are looking for