Compressor 4 never has worked. Please help.
Okay. First the tech specs. MacPro 2x3 Quad, 26G RAM, Lion 10.7.5.
I installed FCPX, Motion5 and Compressor4 on same drive as FC Studio. Followed the directions on opening Motion4 before opening any “new” FCP programs.
FCPX and Motion5 work fine, but I cannot get Compressor 4 to work. Jobs will say they are processing, but nothing seems to be happening. I always have to use Compressor 3. It works right away.
No problems with sharing out of FCPX. That works fine.
Thanks in advance for your help.
Chris
Hi chris, loads of info and procedures on this in the "Compressor" forums. Look in there..
Suggest your Qmaster state info and Parms are buggered! Post your request over there and while you're looking you could start here for getting Qmaster kicked off again.
Fourth post down in..
https://discussions.apple.com/message/17356372#17356372#17356372
Post your results In the compressor forum.
No need to revert to compressor v3.. cOmpressor v4 is great! .. Just sort applemqmaster out and it will work very well.
Hth
Warwick
Similar Messages
-
There are no products listed on my apple id support.
I have taken the phone number out of my apple id support, after which i signed out of the imessage and signed back in, but my phone number is still grayed out and ticked.
also, the sim card isnt even in the phone.
Does anyone out there actually have a solution for this?This cannot happen this is like removing your phone number so no one can call it.
-
can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!
I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem. -
My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now an i need help
For a broken home button you can find your options here http://www.apple.com/support/service/
-
my keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me
Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store
let us know if this helped -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
the sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....
Do you get sound on any apps e.g. Music and Videos but not others ? If you do then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.
I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot. -
Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.
Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.
alway say it was corrupted
Restore the iPad as a new device....
How to set up your iPhone, iPad, or iPod touch as a new device -
i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?
Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps. -
After update iOS 8 some of the apps don't work please help me
After update iOS 8 some of the apps don't work please help me As fast as you can
There can be some of that. Unfortunately, it's up to the app developers to make their app work with the iOS.
So checking for updates can help. You can also look at the reviews for the app, see if others have the same issue. If 8 has broken the app, all you can do is wait.
In some cases, a reset can help. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again. (this can work if the app is fine with iOS8 but is just glitching...it's a harmless reboot of the system)
Another thing to try is to force quit the app(s) and force them to reboot. Double tap the home button. Flick the preview for the app up and off the screen to close it. Then single tap the home button to exit the mode. Try your app again. If it's just a glitch then this sometimes clears it up.
I know once I updated my devices I then had several updates pushed out - updates that required iOS8 so weren't available before the update. -
I Have followed all the steps and still cant remove iCloud to my existing account and add to the new one, the old email account was changed a year ago and cant get that email plus the password don't work please HELP!
Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
Maybe you are looking for
-
Error while integrating Business rules (decision service) in BPEL
hi' from some time I am struggling to integrate Business Rules with BPEL, I was successfully able to integrate it also. however now once again the same error has started coming. If it try to deploy the BPEL process it will give built failed but the B
-
HP Photosmart Premium C410 suddenly stopped wireless printing
My HP Photosmart Premium C410 all in one printer was working fine and than just stopped allowing wireless printing. If I eprint by sending an email to the print it works. My wireless connection has no issues and the printer says it's successfully
-
I type in my email address to be sent an identity verification code but I keep getting nothing
I bought a new laptop and in the Settings and Accounts it tells me to verify my identity on this computer. So I follow the process and it says a code will be sent to my email address. However, nothing is sent to me! I've been doing this for 3 days no
-
Tab Item change for two panel group with 4 tabs each
Hi All Will tab work for dynamic data loading in a panel group ? scenario . Panel group got 4 tabs . each tab contains grid view jsf component. these grid view will populate data once the Index page loads . each tab;s grid view will get data dynamica
-
How solaris calculate virtual Memory ?
Hi, I am using Solaris 10 on both sparc and x86 server. I am still unable to comprehend how solaris calculate Total Virtual Memory. We can check the Virtual Memory in system by SMC tool and by #swap -s command. swap -s total: 6071888k bytes allocated