Compressor won't export my bluray no matter what I do.

I've used compressor repair, and I've used both a reference file and a self contained file. Within seconds of submitting it estimates it will take around 20 hours to export, when it usually only takes 8-9 hours. The export either gets stuck on waiting, or progresses a couple percent and "pauses". I should mention, I've used the same exact file to burn a DVD successfully....but bluray just doesn't work. I have always had success with burning blu rays in the past, and now the past 2-3 projects I haven't been able to.
I desperately need an answer, my clients depend on it.

1.  Exactly how did you uninstall iTunes?  (It can't be done!)
2.  What happens when you attempt to connecg?  Any messages?
3. Try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
There's more to try but let's go a bit at a time.

Similar Messages

  • 30GB won't work...no matter what :-(

    My 30GB black iPod hasn't worked in days, it won't respond. I thought the battery was fully drained so I left it plugged into the computer all night and I wake up to see it still doesn't work. The computer didn't even recognize it, no removable hardware device icon was showing. Just to be on the safe side, I tried the thing two days later (so the battery fully discharges) on my laptop and still no response what so ever. The thing isn't on hold, and I've ran through the most the common 5Rs of solving iPod issues. The unit is less than 5 months old and has never been dropped, gotten wet, or anything else that would remotely cause harm to it. Any suggestions here?
    Dell Inspiron 2200   Windows XP  

    (Re: Mic won't work no matter what I try!? I figured out the Source - mic thing after your previous message just by playing around a bit. I came to the conclusion that it was the same as accessing in the Windows mixer Playback panel though, so I knew that couldn't be the problem.
    On a daily basis, I listen to DSS or WAV files through the A2ZS.
    I don't know how to find out the impedance of my mic.
    I don't know how to tell if there is an integrated (onboard) soundcard that is still enabled. Here's what shows up in my Sounds & Audio Device Properties: Unimodem Half-Duplex Audio Device, Creative SB Audigy, Creative Game Port, Audio Codecs, Legacy Audio Drivers, Media Control Devices, Legacy Video Capture Devices, Video Codecs.
    Interesting to note that about 2 weeks ago, I used my Camtasia Studio software to make a video and I was able to record my voice through the microphone without a hitch. I've been racking my brain and can't think of anything that changed between now and then.
    <!-- [if !mso]>
    <style>
    v\:* {behavior:url(#default#VML);}
    o\:* {behavior:url(#default#VML);}
    w\:* {behavior:url(#default#VML);}
    .shape {behavior:url(#default#VML);}
    </style>
    <![endif] --><!-- [if gte mso 9]><xml>
    Normal
    0
    false
    false
    false
    MicrosoftInternetExplorer4
    </xml><![endif] --><!-- [if gte mso 9]><xml>
    </xml><![endif] --><!-- [if gte mso 0]>
    <style>
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.000pt;
    mso-pagination:widow-orphan;
    font-size:0.0pt;
    font-family:"Times New Roman";
    mso-ansi-language:#0400;
    mso-fareast-language:#0400;
    mso-bidi-language:#0400;}
    </style>
    <![endif] -->

  • TS2220 Macbook Air won't connect to wifi no matter what i try

    please help no matter what i do i cannot conect to wifi network diagnostics cant fix it either

    Follow the steps here: Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    If you get stuck, please explain which step does not work for you.

  • Some attachment​s won't download and open, no matter what

    Hello,
    On my Q10 with the latest 10.2 software, some attachments don't download at all. I work a lot with images so this is a nuisance.
    If I click them while viewing the message in the hub, the progress bar continues almost to the end and then it gets stuck, never moving again. Even weirder: in one email, one out of two attachments downloaded and opened fine, the other didn't. No matter what, the attachments that the Q10 refuses to download are unavailable for viewing on the device, but open perfectly fine on a PC. Forwarding those from the Q10 is impossible, such "sent" messages get stuck with a clock icon.
    In all cases the attachments have been images, but I'm not sure if it has something to do.
    This happens with multiple senders and multiple accounts configured as IMAP w/ Gmail.
    Any solutions or hints how to debug would be appreciated.

    I have not encountered this. I just sent myself a test message with an attachment to see I could see something, Nothing jumps out at me.
    With that email with two attachments and one was fine and the other was a problem, was there any difference between the two that might be a clue? Or if the two attachments were essentially the same, that's a clue as well. (It could be random and have nothing to do with the file.)
    Is Gmail the only service you have been using? I wonder if you would have the same trouble with another, such as Outlook or Yahoo or an ISP email account?
    - Ira

  • Song won't sync to iPad no matter what (deleted a whole album while listening to that song)

    I bought a new album today at the store (Slaughterhouse, welcome to:Our House) and had a lot of problems with it today. I solved most of them (which included sorting all the songs into one album and into the same order) but, just when I think everything is going great as I put the album artwork in (done this before) my OCD makes me delete the whole album off the iPad to see if it all works again when I sync it. Well, I forgot to stop playing the first track (The Slaughter) when I deleted it, and no matter what I try I can't get it back. I have tried a lot, and nobody has asked a similar question so I can't find any more help.
    As I said before, I have OCD, and only the first track is gone (which is just a skit), but, I bought this album JUST to put on my iPad, because we were out. I am really frustrated.
    What I have done includes:
    Removing the album from the music library
    Removing the album from my own playlist
    Resyncing the whole album
    Removing the CD and putting it back in
    Trying to regroup the whole album like before, including trying to have The Slaughter have the same artwork as the rest of the album
    This really troubles me, and I might think again about getting an album from the store if nobody answers this.

    All right, I tried again the next day and I didn't have a problem. I still have no idea what happened the first time, but I guess it was just a random glitch or something. Sorry for the trouble...although nobody else appears to have figured it out either. Thanks again.

  • Compressor won't export in MPEG-2.

    Hi,
    I'm using FCP 4.5 HD to edit a film shot with the Panasonic HVX200 and P2 cards. So far everything went pretty well, except I wasn't able to ingest the P2 files — I found a workaround solution by converting the .MXF files into .MOV files).
    So I now have a 720HD .MOV teaser that I wish to export in MPEG-2 for DVD burning.
    However, everytime I try to export through compressor, I get a message that says "can't process in background".
    I tried to export the HD movie into a DV movie and then export in MPEG-2, but it won't work either: I still get this "can't process in background" message. I cannot export to MPEG-2 using Quicktime either...
    Is there a way around that problem or am I doing something wrong?
    Thx,
    Jeff

    I've done my "homeworks".
    I read various yet often quite similar posts about Compressor, which doesn't work properly with Leopard (Compressor 2.3 and later would work better, if I understand correctly) and found out there wasn't much I could do to fix this bug...
    I also read an Apple article about this problem: I did remove the Compressor files from the frameworks and receipts folders and reinstalled as indicated, but to no avail.
    I'll try to get a used copy of Final Cut Studio, so I can get a more recent version of Compressor (as well as more recent versions of Final Cut Pro, DVD Studio Pro, etc.), which should solve the problem. I just can't afford a brand new product right now (indie cinema is very expensive — editing is no problem, so output will have to wait until I generate more funds to cover the expense).
    Until then, I'll export using Toast... I know, the available menu templates are... well they're just plain bad. But it works fine, so it will be okay for a while.
    Don't hesitate to post your suggestions if you have any: they'll be most welcome.
    Thanks,
    Jeff

  • Compressor won't export a clip selection

    I'm having difficulty exporting a portion of my FCP X project to Compressor 4.  When I select a portion of my clip, Compressor 4 exports the entire project.
    Any ideas?

    Yes - it's a sadly missed feature.
    There are several workarounds. Duplicate the project and then delete the unwanted material and export. Then if you want to, you can use Ctrl+Z to get everything back as it was (it helps to keep backups by duplicating a project fairly regularly anyway).
    There are other ways, but this seems to be about the best.
    As I said, a workaround, but that's what we're stuck with for now.
    Andy

  • Windows 7 Won't Boot. Frozen no matter what i try.

    Hello! My Laptop Is A Toshiba L755D-S5204.
    & I'v had problems with it sense i got it 2 yr's ago "Brand new" & contacted before but i recieved no help for the issues i was having. but i'v had to tolerate it the way it was sense i'v been in & out of hospitals. & today it's taken all day to get nowhere.
    But today i had a bigger issue, I can't get past the windows screen & a blue screen flashes than it brings me back to the Start Windows Normally Or Start Windows Fix Launch Startup Repair. & When i go into Repair it just shows a mouse & doesn't load anything but a black screen.
    When i go to boot into Safe Mode it does the same thing. & I Never even got a Recovery disk for this laptop & it's always had issue's such as the DVD Drive has never worked. So now all i can use is a 8GB USB Stick to try & save this Laptop. Is there any Toshiba Software i can load onto a USB Stick to get WIndows to boot?
    Help will be appreciated! I Want to fix this for good & can use any advice towards this model Laptop.
    Also could use a bit of help Removing the DVD Drive. I Got a new one but never installed it & not exactly sure if it fit's but it look's like it does & maybe my only hope here. & If i reformat it i don't want to loose some stock Toshiba Software like the mouse functions & FN Key features.

    It came with the recovery information on the laptop itself. If you didn't make the backup recovery media yourself, you might still be able to use the recovery utility. Work through the suggestions in this article:
    What can I do if my Windows 7 or Windows Vista laptop won't start?
    - Peter

  • It won't open any website, no matter what i type in, in ff 4 beta 5

    i downloaded ff 4 beta 5 this morning, and at the end of the installation, (where they check compatability of add-ons) a pop-up said
    The operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly.
    and when i opened the ff beta, it won't load any pages...
    its just in the beta... my regular ff (3.6.9) is fine.

    This is a known bug and it is being worked on.
    The relevant bug report is [https://bugzilla.mozilla.org/show_bug.cgi?id=588511 Bug 588511], but please do not comment on the bug report.

  • My iPod is disabled and won't connect to itunes no matter what I do.

    I have unistalled itunes, reinstalled it, sent the ipod into recovery mode and it still won't connect. Please Help!!

    1.  Exactly how did you uninstall iTunes?  (It can't be done!)
    2.  What happens when you attempt to connecg?  Any messages?
    3. Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
    There's more to try but let's go a bit at a time.

  • Iphone 4s won't turn back on no matter what I do. How should I fix it?

    My iPhone today randomly turned off with about 15% left. I assumed it was just out of battery and plugged it in. After about 20 minutes there were still no signs of life and it wouldn't even give the low battery signal. So i plugged it into my computer. Still nothing. I switched chargers and tried on the wall and computer. It's been left charging for a few hours but nothing will turn it back on. When it's plugged into my computer and I go to iTunes, there is no recognition of my phone. Does anyone know what's wrong or what I can do? I leave for vacation early tomorrow.
    Also, for extra, my sleep button has been broken for about 6 months so I use that other button to put it to sleep. I usually turn it on by just holding the home button once i plug it in but that obviously has done nothing.
    Please try to help me.

    Usually you would do a reset, by holding down the home/sleep button together until you see the apple logo and then release.
    Since you have a broken sleep I don't see any other options .

  • Time capsule won't extend my network, no matter what I try

    I have tried everything I can think of, but I just can't seem to get my TC to extend my existing wireless network. I have read the Time capsule "manual" but it's no help, and I have tried a few possible solutions available through Google - but to no avail. Is there anyway possible to get it to do this?

    No "official" list that I'm aware of, but the following are the only ones I'm aware of that are potentially compatible:
    o Linksys WRT54G or WRT54GS (not v5)
    o Belkin F5D7230-4 and F5D7231
    o BT Voyager 2091
    o Netgear WGR614 v6
    o Buffalo WGR-G54
    As you can see the TRENDnet is not amongst those so I would seriously doubt that you will have any success in doing so. Sorry!

  • Firefox won't save my homepage no matter what I try. Help!

    I have done everything it says in the troubleshooting helps, but nothing works. Everytime I save my homepage, close Firefox and reopen it, my homepage is reset to searchqu.com/406.

    Hi zeemaster,
    You could try using the restore to default option in the ''Tools > Options > General'' setting for your homepage. It should clear out any strangeness. Then you can set your homepage to whatever you like. If that doesn't work, you could take a look at [[Preferences are not saved]].
    I don't know for sure, but it sounds like you might have been hit with some malware. [https://support.mozilla.org/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20malware?s=malware&r=0&as=s#w_how-do-i-get-rid-of-malware This article] will show you how to address it.
    Hopefully this helps!

  • Iphone 4 Won't connect to Internet no matter what.

    I've tried pratically everything besides laying a hand on my router.
    I've resseted everything.
    I've reseted the Network.
    I've reseted the phone
    I've turn off the phone.
    I've entered the password correctly a million times.
    All I get is the message "unable to connect"
    All of my other devices such as my pc, my 3g, and my Android are sucessfully connected to the internet.
    Any Ideas?

    Tap Settings / General / Reset / Reset Network Settings.
    if that doesn't help, you do not want to go back to a prior iTunes version.
    Since you restored from a backup, it could be something in the backup causing the problem, so restore as new instead.
    How to set up your iPhone, iPad, or iPod touch as a new device
    You can re download iTunes purchases without being charged again.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Screen blanks out and won't come back on no matter what I press.

    Lately my laptop been having this weird tantrum, it would turn itself off while im doing something(typing,net browsing etc) for no reason whatsoever and when i tried to turn it back on by pressing the keys or moving the mouse, nothing seems to work.
    # xset q
    Keyboard Control:
    auto repeat: on key click percent: 0 LED mask: 00000000
    XKB indicators:
    00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
    03: Compose: off 04: Kana: off 05: Sleep: off
    06: Suspend: off 07: Mute: off 08: Misc: off
    09: Mail: off 10: Charging: off 11: Shift Lock: off
    12: Group 2: off 13: Mouse Keys: off
    auto repeat delay: 660 repeat rate: 25
    auto repeating keys: 00ffffffdffffbbf
    fadfffefffedffff
    9fffffffffffffff
    fff7ffffffffffff
    bell percent: 50 bell pitch: 400 bell duration: 100
    Pointer Control:
    acceleration: 2/1 threshold: 4
    Screen Saver:
    prefer blanking: no allow exposures: yes
    timeout: 10800 cycle: 10800
    Colors:
    default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
    Font Path:
    /usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
    DPMS (Energy Star):
    Standby: 10800 Suspend: 10800 Off: 10800
    DPMS is Enabled
    Monitor is On

    I think the problem appears after a period of inactivity like 10 min.
    I ran "journalctl -r"
    -- Logs begin at Sun 2014-01-19 10:44:37 CET, end at Fri 2014-01-31 14:50:55 CET. --
    Jan 31 14:50:34 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): GnomeDesktop-WARNING **: Failed to acquire idle monitor proxy: Timeout was reached
    Jan 31 14:50:31 scorpion kernel: Watchdog[3468]: segfault at 0 ip 00007f7b413d2ec8 sp 00007f7b2cbc3820 error 6 in chromium[7f7b3dd0e000+515d000]
    Jan 31 14:50:31 scorpion gnome-session[2086]: [3467:3468:0131/145031:ERROR:gpu_watchdog_thread.cc(253)] The GPU process hung. Terminating after 10000 ms.
    Jan 31 14:50:28 scorpion login[3455]: LOGIN ON tty2 BY paradox
    Jan 31 14:50:28 scorpion systemd[1]: Started Session 7 of user paradox.
    Jan 31 14:50:28 scorpion systemd-logind[1040]: New session 7 of user paradox.
    Jan 31 14:50:28 scorpion systemd[1]: Starting Session 7 of user paradox.
    Jan 31 14:50:28 scorpion login[3455]: pam_unix(login:session): session opened for user paradox by LOGIN(uid=0)
    Jan 31 14:50:28 scorpion kernel: type=1006 audit(1391176228.492:8): pid=3455 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=7 res=1
    Jan 31 14:50:24 scorpion dbus[1046]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
    Jan 31 14:50:24 scorpion dbus[1046]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
    Jan 31 14:50:23 scorpion login[3455]: FAILED LOGIN 1 FROM tty2 FOR paradox, Authentication failure
    Jan 31 14:50:21 scorpion login[3455]: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=tty2 ruser= rhost=
    Jan 31 14:50:21 scorpion login[3455]: pam_unix(login:auth): check pass; user unknown
    Jan 31 14:50:21 scorpion gnome-session[2086]: [3467:3467:0131/145021:ERROR:nss_util.cc(558)] After loading Root Certs, loaded==false: NSS error code: -8018
    Jan 31 14:50:20 scorpion kernel: Watchdog[2668]: segfault at 0 ip 00007ff4df79dec8 sp 00007ff4caf8e820 error 6 in chromium[7ff4dc0d9000+515d000]
    Jan 31 14:50:20 scorpion gnome-session[2086]: [2658:2668:0131/145020:ERROR:gpu_watchdog_thread.cc(253)] The GPU process hung. Terminating after 10000 ms.
    Jan 31 14:50:19 scorpion login[3455]: pam_tally(login:auth): pam_get_uid; no such user
    Jan 31 14:50:17 scorpion acpid[1043]: client 1102[0:0] has disconnected
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): updates-plugin-WARNING **: failed to set proxies: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion dbus[1046]: [system] Activated service 'org.freedesktop.PackageKit' failed: Process org.freedesktop.PackageKit received signal 5
    Jan 31 14:50:09 scorpion kernel: traps: packagekitd[3461] trap int3 ip:7f328a525289 sp:7fff03f57a40 error:0
    Jan 31 14:50:09 scorpion org.freedesktop.PackageKit[1046]: (packagekitd:3461): PackageKit-alpm-ERROR **: invalid SigLevel value:
    Jan 31 14:50:09 scorpion dbus[1046]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
    Jan 31 14:50:09 scorpion systemd[1]: Started Getty on tty2.
    Jan 31 14:50:09 scorpion systemd[1]: Starting Getty on tty2...
    Jan 31 14:50:02 scorpion kernel: ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
    Jan 31 14:50:02 scorpion logger[3428]: LID opened
    Jan 31 14:48:24 scorpion dbus[1046]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
    Jan 31 14:48:24 scorpion dbus[1046]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
    Jan 31 14:46:24 scorpion dbus[1046]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
    Jan 31 14:46:24 scorpion dbus[1046]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
    Jan 31 14:44:24 scorpion dbus[1046]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
    Jan 31 14:44:24 scorpion dbus[1046]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
    Jan 31 14:42:31 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): housekeeping-plugin-WARNING **: Failed to enumerate children of /var/tmp/systemd-private-8Z2qdt: Permission denied
    Jan 31 14:42:31 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): housekeeping-plugin-WARNING **: Failed to enumerate children of /var/tmp/systemd-private-F1I1UZ: Permission denied
    Jan 31 14:42:31 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): housekeeping-plugin-WARNING **: Failed to enumerate children of /var/tmp/systemd-private-0jsZep: Permission denied
    Jan 31 14:42:31 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): housekeeping-plugin-WARNING **: Failed to enumerate children of /var/tmp/systemd-private-k69iDg: Permission denied
    Jan 31 14:42:31 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): housekeeping-plugin-WARNING **: Failed to enumerate children of /var/tmp/systemd-private-kv0mAv: Permission denied
    Jan 31 14:42:31 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): housekeeping-plugin-WARNING **: Failed to enumerate children of /var/tmp/systemd-private-0n1fi4: Permission denied
    Jan 31 14:42:31 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): housekeeping-plugin-WARNING **: Failed to enumerate children of /var/tmp/systemd-private-6KX8mO: Permission denied
    Jan 31 14:42:31 scorpion gnome-session[2086]: (gnome-settings-daemon:2134): housekeeping-plugin-WARNING **: Failed to enumerate children of /var/tmp/systemd-private-esqRCQ: Permission denied

Maybe you are looking for

  • Error while opening Adobe Form Builder

    Hi all, I am trying to open an existing form in Adobe Form builder (TA SFP). When ever I display a standard form say FP_TEST_01 and go to the layout tab, I get an error saying <i><b>Error occurred in communication with layout editor</b></i>. I am usi

  • Issue in SYS_CONTEXT function

    Dear Friends, I have an issue in SYS_CONTEXT function. If I run the SYS_CONTEXT function SQL query in SQL PLUS and SQL Developer Tool, the values are showing differently in both the tools. CASE 1: In SQL Developer Tool, SQL> SELECT SYS_CONTEXT('USERE

  • MSI E350IA-E45 USB Not recognised after cold boot.

    Any one else have the same issue? My asus (Bluetooth) BT211 is not recognised after cold boot. I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue. MSI tech has not been back to me if this is a fau

  • "User" did not resond

    So - i, like milions of other iChat users am tired of seeing th "User (my name) did not respond" message. I have read through all the stuff (what to do to my computer - what to do to my network router). is their any new current advice on fixing the p

  • Multiple line items uploading through LSMW

    Hi,   I am using LSMW as uploading tool for master data uploading in quality server.In the case of multiple line item i am feeling difficulty to use LSMW. Plaese help me to find solution...........