Computer Generated frames at HD resolution result in mpeg files skipping

I'm trying to make a computer animation, frames generated as jpegs in 3D Studio Max at 1280 x 720 pixels. With video only, I can use the Adobe Media Exporter to make an Mpeg 2 file which plays without problem, however as soon as I add music the mpeg file skips, both sound and picture. I've tried using both an wma and a wav file, and made sure the audio settings in the Exporter match (bitrate, Hz etc). Any suggestions would be gratefully received.

> Microsoft's own Windows Media Encoder 9 Series
The encoder does a great job of encoding, but I HATE the interface. It is horrible and slow and has no batch capabilities.
However, if you also download the Windows Media Encoder 9 Series SDK from Microsoft, it includes this file:
\WMEncSDK9\samples\vb\batcher\BatchEncode.exe
It is supposed to be a "sample" of an interlface you can make with Visual Basic -- but it's a fully functional front end for batch processing to .wmv. Now THAT is cool :)

Similar Messages

Generating movies with bad resolution

Hello all, Hello all,
I hope everything is going well and I apologize for my poor English. I am creating movies using IMovie’08 and sharing with IDVD. The final result that I get generating DVD is a video with bad resolution.
I have recorded all videos in 1080i using a SR12 Sony handycam and imported to IMovie with this resolution. I prepare an IMovie project and shared by Media Browser using large size, that I know is a smallest size than 1080i.
I set the encoding mode on IDVD to Professional Quality and generated a DVD. The result image’s quality on DVD is similar to a VHS tape! I generated 4 different DVD and tested all these DVD using different DVD players and different televisions and the result were always the same.
Please, can someone inform me what I am doing wrong or provide me some tips to get better results?
Thank you all in advance.
Regards,

The result image’s quality on DVD is similar to a VHS tape! I generated 4 different DVD and tested all these DVD using different DVD players and different televisions and the result were always the same.
No matter what you send to iDVD will be encoded as SD 640x480 "square" pixel content to a "720x40" rectangular pixel data matrix. In other words the best resolution you could expect would be half of what you started with and at the third generation of transcoding. (I.e., 1080i AVCHD => 1080i AIC/AIFF => 960x540 H.264/AAC => 720x480 (640x480) MPEG2/PCM.)
can someone inform me what I am doing wrong or provide me some tips to get better results?
If you are expecting HD quality on a standard DVD, then your expectations may be too high for this work flow. Using a more professional editor and/or burning as HD optical content may better suit your needs/expectations.

Recovery from computer generated "Recovery Disks".

I have a notebook G62-340us with Win7. At bootup on the splash screen I have been getting a message that states the hard drive is going to fail etc. I replaced the drive with two new drives ( seperate occasions) but the computer generated recovery disks hang up . the first drive accepted the first recovery disk and hung at 18 % on the second disk. I replaced that with another new hard disk and that hung up at 23% of the first recovery disk . I replace the original disk and the machine still works with the same message but the boot to the desktop takes 8 mins. I realize that this disk may have Virus or spyware problems also but my main concern is not being able to "Factory install" onto the new disks. Any help would be appreciated, thanks

I have a notebook G62-340us with Win7. At bootup on the splash screen I have been getting a message that states the hard drive is going to fail etc. I replaced the drive with two new drives ( seperate occasions) but the computer generated recovery disks hang up . the first drive accepted the first recovery disk and hung at 18 % on the second disk. I replaced that with another new hard disk and that hung up at 23% of the first recovery disk . I replace the original disk and the machine still works with the same message but the boot to the desktop takes 8 mins. I realize that this disk may have Virus or spyware problems also but my main concern is not being able to "Factory install" onto the new disks. Any help would be appreciated, thanks

"Could not complete the Video Frames to Layers command because the movie file could not be opened."

I'm using Photoshop CS5 extended.
I've been using that to make gifs. It was fine when I import video frams into layers with the video formats of .mov or .avi. But After I installed OSX 10.6.8, this message comes up everytime I want to import videos: "Could not complete the Video Frames to Layers command because the movie file could not be opened."
So I installed my old OS back which is 10.6.3 but the problem is still there.
May I know what to do to solve this problem because all along I've been fine with making gifs and importing videos until now.
Please help, thank you.

Adnicej- wrote:
...I've been using that to make gifs...
The computer deities may be trying to say something to you. GIF is not a video format.
Are you opening video with the same codec that was successfully opened before?

How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

Hi Keith, and all others chiming in, I do have the correct option checked in advanced settings telling iPhoto to copy the images into the library. What is a refernced library? Perhaps this is where I am getting confused. I exported my entire photo library from an old iMac5 to my external hard drive, from there I attempted to import the entire library to my new iMac. Am I overlooking an obvious and easy way to import from the hard drive to the new iMac--I dragged the entire photo pholder from the hard drive to the open window of iPhoto on the new computer. Now, I only get preview file sizes in iPhoto, unless I have my external drive open. Perhaps I need to import the original images from the hard drive in a different way...?! (This is making me feel pretty stupid.)

Send query results to a file using Toad

Hello,
I have a select statement that generates xml rows, and I need to send the results to a file. I am using TOAD VI. The rows generate ok but when I right click and choose the save as option all I end up with is an empty file.
Is there a way I can just send the results directly to a file instead of to the screen?
Thanks.

user11293056 wrote:
Would you happen to know of a website that shows how to create an xml file using SQL*Plus?
Thanks.A search of asktom.oracle.com for the following phrase found a couple interesting pages:
table(xmlsequence(cursor
On such page is this one:
http://asktom.oracle.com/pls/asktom/f?p=100:11:1074646661177911::::P11_QUESTION_ID:4061080732051
As an experiment, you might take a look at the output of the following (replace SELECT * FROM MY_TABLE_HERE with your SQL statement):
SELECT
FROM
TABLE(XMLSEQUENCE(CURSOR(
    SELECT
    FROM
      MY_TABLE_HERE
   )));Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

How do I maintain high resolution of my Publisher file when I convert it to PDF?

How do I maintain the high resolution of my Publisher file when I convert it to PDF (I do not have access to a PostScript printer). Am I correct in understanding that the simple answer would be to convert the .pub file into a .ps file and then save this as a PDF? Which is no use to me because every time I try to convert my Publisher file to PostScript, the process fails because it is looking for connection to a PostScript printer. I need to send a high resolution (minimum 300dpi) PDF version of high resolution MSPublisher files to a commercial printer. And time is running out!

Hi,
The version set information and the tag hierarchy are stored within the catalog. It sounds as though you haven't brought over the catalog from your old computer.
The recommended way to transfer elements from one computer to a new one is to use the Backup catalog to CD, DVD or Hard Drive on your old system and then use Restore catalog from CD, DVD or Hard Drive on your new system. Is this how you did it?
That should have preserved your version sets.
Brian

Best way to save XML results to a file via command line

I'm trying to set up an easy way that I can save my XML results to a file via the command prompt.
Here's my current command line statement
sqlcmd -S server/database -E -i C:\XML.sql -o C:\Test.xml -h -1 -m 1 -y0
That works about 95% of the way. The problem is it still inserts a couple random line breaks and throws my whole XML off.
The whole idea of doing this via the command line is because it would be nice to link it to a batch file that runs every so often. Is there a better way to execute a SQL statement and have its contents saved properly to an XML file?

If I copy and paste the result via SSMS into a file and save it as an XML, I can view it properly in browsers. If I use the code above, I get among other errors:
This page contains the following errors:
error on line 2 at column 202: Encoding error
The XML file gets processed in a 3rd party app. The file that I paste directly works fine, but the file that the script produces generates errors and it won't work.

For the second dime in a yearish,following update download my computer crashed.after installing maverick four times got a semi working computer but my backup disc is trashed and working files seem lost.anybody else get this problem or is it selective?gerr

for the second time in a yearish,following download my computer crashed and burned.four attempts to reinstall maverick resulted in a semi-working computer but my back up disc trashed and working files seem lost.Anybody else get this problem and how regularly or is it a selective event?
gerry

It is not safe to publish your email address in an open forum, so I've asked the hosts to remove them. Your post is here for anyone to see and if someone has a solution, they will post an answer, so there is no need for an email address.

How to make the result showing one time and make the result to csv file?

My script having problem of showing out all the AD computer name result from Active Directory once when running it and storing the result to csv file. I am a newbie in AD and powershell.
This is the code:
$strADPathFile = "D:\Powershell for AD\ADPathList.txt"
$strErrLogFile = "D:\powershell for AD\errorADComputer.log"
$arrADPath = Get-Content -Path $strADPathFile
foreach ($strADPath in $arrADPath)
try
$objSearch = New-Object DirectoryServices.DirectorySearcher
$objSearch.Filter = '(objectCategory=computer)'
$objSearch.SearchRoot = $strADPath
$objSearch.SearchScope = "Subtree"
$objSearch.PageSize = 1000
$objResults = $objSearch.Findall()
write-host "Retrieving AD computer information in the domain $strDomain"
write-host "Number of AD Computer Name result: "$objResults.Count
foreach($objResult in $objResults){
$objComputer = $objResult.GetDirectoryEntry()
write-host $objComputer.dNSHostName
try
# InsertSQLTable $objComputer
catch
write-host $error[0]
$strError = $objComputer.dNSHostName + " " + $dateNow + $error[0]
Add-Content $strErrLogFile $strError
catch
write-host $error[0]
Export-Csv D:\PowerShellforAD\test2.csv
This is the error that I had get is that it will get the result for 2nd time again.
By the way, what is InputObject about? I had research some of it and still did not quite get it. Can anyone explain? Thanks

Hi,
in the final line you call Export-Csv. which is a great command at exporting information. However, for it to work it needs a path to export to (D:\PowerShellforAD\test2.csv in your case) and Information (InputObject) to export.
You do not give that command any Information, so it throws an error.
Cheers,
Fred
There's no place like 127.0.0.1

I have two different itunes music files on my computer. How do I combine them into one file?

I have two different itunes music files on my computer. How do I combine them into one file?

I don't think so. The only other ID I have is a developer id, and I didn't get that until several months after I got the phone. In addition purchases I made from the App Store onthe phone would sync up with It unes on the Mac meaning it would be the same id.
However I looked at the AppStore on my phone while it was connected to the Mac with iTunes open, and now the balance has changed to the same as the others.

While generating a crystal report can we edit database files in field explorer ?

Hi,
while generating a crystal report can we edit database files in field explorer (at middle can we edit database fields)
Regards,
Mahendra

Wrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT

How do i open iweb files on a different computer than what I created them on? - Domain file can't be opened

I started a web page in the lab at school and want to open the file here on my computer. I saved the application support/iweb/domain file and have tried to replace the old one with it, but that doesnt work. I looked up where you can delete the last string in the com.apple.iweb.plist file but that would not work either. I've got the site published to a folder and the domain file saved and with me but thats all

Put the copied domain file somewhere, or rename it and put it in the Application Support/iWeb folder, and double-click it. That should open it.

How to check the resolution of a pdf file using Acrobat 9 pro?

How to check the resolution of a pdf file using Acrobat 9 pro?

PDF files don't have one resolution, but may have none or many different resolutions, one per image. You can check the maximum/minimum resoluion with preflight in Acrobat Pro, but not in Adobe Reader.

I bought a new computer, and i have transfered everything using home share, file transfers, etc.. yet still when i go to sync, itunes tells me ipod can only be synced with one computer... is there a way to retire the relationship with the old computer?

i bought a new computer. the itunes app allows for home shareing, file transfers, etc.. but i want to discontinue the syncing with the old computer and sync my ipod touch now only on my new system... but i cant seem to disconnect that old relationship at all.. when i try to syncit says that my ipod is already synced with another computer, do i want to discontinue that and only use the new informationon this computer? i dont want to do that yet because it doesnt seem like everything has come over, and i am afraid of losing songs that i downloaded from cds, etc..

if you don't want to sync it because you don't think that everything has been transferred then i would check first if you can, before you commit to used only the data from your new computer.
though, im not sure if this is true, but i think that when you sync your ipod to a new computer it will take the items from your ipod and put it on itunes, like when you purchase something on your ipod and it gets automatically transfered, but don't take my word for it.

Computer Generated frames at HD resolution result in mpeg files skipping

Similar Messages

Maybe you are looking for