Error with file adapter

HI ALL,
Our Secnario is Bapi to File.Hear in the Target side we have two target folders.For that I am internally place my file in the PI and pick up the file from PI and posted to end directories.For that Hear i am using 2 flows form BAPI to FILE.But problem is when i am monitoring the Receiver comm channel at target PI system its shows some error like Unable to clone File Adapter receiver channel for parallel processing and files are not posted in the target system
please provide the better solution for this issue
Thanks & Regards,
Satya

Hi,
I am internally place my file in the PI and pick up the file from PI and posted to end directories
Elaborate that process.
How to split the target directories. In this scenario is BPM? or Any rule implemented in Receiver determination.
Regards
Vijaykumar

Similar Messages

Interpreting Multibyte data with File Adapter in BPEL Process

Hi all,
I am trying to interpret multibyte data file using native schema file.The file is defined as below:-
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://TargetNamespace.com/ftpinbound"
xmlns:tns="http://TargetNamespace.com/ftpinbound"
elementFormDefault="qualified"
attributeFormDefault="unqualified" nxsd:encoding="MS932" nxsd:stream="bytes" nxsd:version="NXSD">
<xsd:element name="root">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Header" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecType" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="OperMode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SendSideCompCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="RecvSideCompCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="BPID" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="InfoTypeCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
     <xsd:element name="CreateDate" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SendSideSysCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="RecvSideSysCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="Preliminary" type="xsd:string" nxsd:style="fixedLength" nxsd:length="458"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Lines" minOccurs="1" maxOccurs="unbounded" nxsd:style="array" nxsd:arrayTerminatedBy="(">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="DataProcessNo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="InfoClassCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="DataCreateDate" type="xsd:string" nxsd:style="fixedLength" nxsd:length="6"/>
<xsd:element name="SellerCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="OrderRecvPartyCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="PODeptCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="ProductNo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="19"/>
<xsd:element name="CorrectionCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SupplyClass" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="Buyer" type="xsd:string" nxsd:style="fixedLength" nxsd:length="7"/>
<xsd:element name="MatStdDimension" type="xsd:string" nxsd:style="fixedLength" nxsd:length="20"/>
<xsd:element name="Package" type="xsd:string" nxsd:style="fixedLength" nxsd:length="7"/>
<xsd:element name="Remarks" type="xsd:string" nxsd:style="fixedLength" nxsd:length="30"/>
<xsd:element name="ConTaxClass" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SuppDeptCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="SuppProdName" type="xsd:string" nxsd:style="fixedLength" nxsd:length="30"/>
<xsd:element name="SuppProdNameCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="25"/>
<xsd:element name="SuppUnit" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"/>
<xsd:element name="SuppUnitPrice" type="xsd:string" nxsd:style="fixedLength" nxsd:length="13"/>
<xsd:element name="PODeptName" type="xsd:string" nxsd:style="fixedLength" nxsd:length="20"/>
<xsd:element name="Buyer_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="14"/>
<xsd:element name="MatStdDim_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="Remarks_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="60"/>
<xsd:element name="SuppDeptName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="SuppProdName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="60"/>
<xsd:element name="PODeptName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="CountingMTHs" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="SuppProdNvAmount" type="xsd:string" nxsd:style="fixedLength" nxsd:length="10"/>
<xsd:element name="SupProdSingleItem" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SupProdWIP" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SupProdSpoiledQnty" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Trailer" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecType" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="NoOfRec" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="Preliminary" type="xsd:string" nxsd:style="fixedLength" nxsd:length="526"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
This schema works fine and data is produced as expected when I am using "chars" as the stream option.However I can't use "chars" as the stream option and need "bytes" as the stream option. However when mentinong "bytes" option the following exception is generated:
Charset "MS932" not supported.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
     at oracle.tip.pc.services.translation.xlators.nxsd.ByteReader.<init>(ByteReader.java:87)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.createScanner(NXSDTranslatorImpl.java:800)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.translateFromNative(NXSDTranslatorImpl.java:440)
     at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:504)
     at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:266)
     at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:179)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
     at java.lang.Thread.run(Thread.java:595)
Please let me know can I at all read a file in byte format with File adapter using a desired encoding style?This is littile urgent.
Thanks

Hi James,
Yeah I tried that too and it gave the same error. And I need to encode with MS932 only since the data will contain Japanese characters and this encoding is identified both by windows and non-windows OS.
Please can you advice what can I do since the requirement is urgent.
Thanks

Problem with FIle Adapter

Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandra

Hi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth

How to process large input CSV file with File adapter

Hi,
could someone recommend me the right BPEL way to process the large input CSV file (4MB or more with at least 5000 rows) with File Adapter?
My idea is to receive data from file (poll the UX directory for new input file), transform it and then export to one output CSV file (input for other system).
I developed my process that consists of:
- File adapter partnerlink for read data
- Receive activity with checked box to create instance
- Transform activity
- Invoke activity for writing to output CSV.
I tried this with small input file and everything was OK, but now when I try to use the complete input file, the process doesn't start and automatically goes to OFF state in BPEL console.
Could I use the MaxTransactionSize parameter as in DB adapter, should I batch the input file or other way could help me?
Any hint from you? I've to solve this problem till this thursday.
Thanks,
Milan K.

This is a known issue. Martin Kleinman has posted several issues on the forum here, with a similar scenario using ESB. This can only be solved by completely tuning the BPEL application itself, and throwing in big hardware.
Also switching to the latest 10.1.3.3 version of the SOA Suite (assuming you didn't already) will show some improvements.
HTH,
Bas

Problems with File adapter

Hi All
I am facing some problems with XI system. XI production server was restarted couple of days back. From that time, 1 file is not reaching its destination. When i go to communication channel monitoring, i see this message for all the communication channels with file adapter "No adapter registered for this channel".
But, communication channels with SOAP adapter are working fine, and the corresponding files are reaching its destinations. So, what should i do to rectify this probelm? Do we have to restart XI server onceagain? Is there anything pirticular, to be careful about, while restarting XI system?
Many Thanks in Advance
Chandra Sekhar

Hi Chandra shekar,
Plz try to do the following steps:
1)Try after restarting the Java Stack.
2)Try after SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
This will help you to find SP Level
http://help.sap.com/saphelp_nw2004s/helpdata/en/1f/c45b4211aac353e10000000a1550b0/frameset.htm
http://hostname:5/CPACache/refresh?mode=full
Regards,
Vinod.

Sign on problems within Elements 10; plus cannot backup writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Error-Receiver File Adapter using Variable substitution when file is empty

XI Experts,
We are on PI 7.0, SP14.
We are using variable subtitution to get the filename from source message. This works fine as long as we have data in the payload for filename element. But we have a scenario where we don't have to create file when certain condition does not exists in source message so in the message payload filename element will not exists in such condition and file will be empty and we should not create file.
Parameter in the communication channel for Handling empty message is "Ignore".
Does anyone knows how to handle this scneario. We don't want to default any file name in the message mapping if source file name element does not exists.
We are following getting error in the Adapter engine.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file
Thanks
MP

You can implement this by writing the module to throw an exception or whatever method you want to execute.
If you don't want to receive an error message then module is suitable for you.
Gaurav Jain

Error on file adapter (GENERAL_ERROR on XI_J2EE_ADAPTER_XI_HANDLER )

Hi Experts,
I have just configured a sender file adapter with content conversion in a PI 7.0. I will try to explain the problem:
1. I put the text file on the selected folder, to be taken.
2. The file is taken from the folder and archived in the archive folder.
Until here everything works fine, but from here:
- I can't watch the message in the sxmb_moni
- I can watch the message in the message monitoring in the Runtime Workbench. Here I can even see the XML well formed(the text file have been processed correctly)
The error log:
Message Data
Attribute Value
Engine Adapter Engine
{Status System Error
Repeatable Yes
Cancelable Yes
Error Category XI_J2EE_ADAPTER_XI_HANDLER
Error Code GENERAL_ERROR
Does anybody know where will be the error?
Regards
Gonzalo

Hi,
please check the following links related to your error category.
File (xml)>>xi>>IDoc
Problem in JDBC Reciver Channel
Problem in Webservice -> XI -JDBC
regards
mahesh.

Error in File Adapter: no alert generated

Hi folks,
I have a problem with monitoring our file adapters.
In one scenario we occasionally get the following error:
Fehler bei der Konvertierung des Dateiinhalts in XML an Position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'eTSFlatDetailStructure':java.lang.Exception: ERROR in configuration / structure 'eTSFlatDetailStructure.': More elements in file csv structure than field names specified!
So I have build an alert category with me as recipient and an alert rule in Runtime Workbench with the following attributes:
- Rule active
- Alert-category as I have created above
- Bound to Message: no
- Error occures in Adapter Engine -> File Adapter
I have tested the Category... it works... but the rule does not fire any alert.
Has anyone an idea how to solve this problem?
Thanks
Greetings
Habib Sarbas

Hi,
the report generates following output:
20090507072803,7018210          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*Error records received from AF on host rd-srxt0_RXT_00 (sysid: RXT client: ). Try to send Alert...
20090507072803,7045260          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*Find rule for (From:vkeTSFlatBPM:vkeTSFlatBPM_var01_eTSSender:mi_eTSFlat_var01_out_asyn:urn:rsd-de:xi:ZRSD_XI_01:vkeTSBPM To::::)
20090507072803,7063530          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*No matching rule found
I also tried to specify the conditions with service, interface and namespace, but this is only possible if i switch bound to message to yes...
but the error occurs in file adapter... there is no message generated...

Sender communication channel with file adapter

Hi All,
           Here i am facing some error with the communication channel in which i have used FILE adapter. Here i am using PI 7.0. Here i have configured the communication channel. but i didn't checked the "operating system commands". and i checked the " adapter specific message attributes". i dont know whether i have to check these adapter specific message attributes or not. When i have gone to runtime work bench there i saw in adapter monitoring. there it is not showing any error. but in communication channel monitoring it is showing that it is having -
"processing errors" but i am not getting where will be the error.. Any new ideas will be appreciated.
Thanks in advance,
Ramana

Hi Bhavesh and Aaron,
              Here i viewed the XMl format of the sender file in the mapping. there i found the difference between the file i am trying to pick up by the adapter and the XML instance of the sender interface in mapping. The difference is there in the message type of the <ns0> tag the file i am trying to send is having one message type and name space, where as the XMl instance is having the other message type and same name space.
             i think that will the problem in processing my file. i am not sure about it.please any of you confirm that if it is th processing error i am facing or not.
            Thanks for your efforts.
Regards,
Ramana.

Minoccurance not satisfied error in file adapter, in complex native builder

hi ,
i need to read a file of format
header
data
tailer
for example
PurordPurItmPurDes
PO101Z1003refrigrator
PO102z1004washingmachine
PO103Z1003refrigrator
PO104z1005sterio
Purdate25/12/2012
while creating complex format using file adapter. i am getting following error
min occurance not satisfied.. main problem is if i kept unbounded for the data records, its showing me the while reading last record. if i specify data records with some defined value in maxoccurance . i can generated nxsd. otherwise i was popped up with min occurs not satisfied for the last record
Edited by: 947453 on Jul 23, 2012 1:25 AM

Hi,
Not sure where you when/where you getting that message but I can tell you that the wizard can help you to a certain point, for more complex translations do the best you can with the wizard and then go to edit the XSD source.
This document has plenty of samples...
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/nfb.htm#CIAHICFD
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question
https://forums.oracle.com/forums/ann.jspa?annID=330

System error in File Adapter

hi experts,
I have a File to File (FTP) scenario.
The message caught the system error in the Adapter engine with out any error message.
the last message noted in the adapter engine is
Success File adapter receiver: processing started; QoS required: ExactlyOnce
Please suggest to resolve the error.
Thanks in advance,
MK

Raj,
As i mentioned above,
                                  the last message noted in the (audit log)adapter engine is
Success File adapter receiver: processing started; QoS required: ExactlyOnce
Agasthuri Doss,
                           There are no error messages.
               It shows the message: Processing started
                                                 Polling interval started. Length: 60.0 seconds
                                                  Processing finished successfully
        And the file is deleted from the source directory.
Edited by: mk.xi on Feb 25, 2008 1:51 PM

Problem with file adapter for delimiter

Hi,
I am working in a file-idoc scenario where i need to read a file with comma delimited body.
Content configuration for the body of the file is as follows,
BODY.fieldNames F1,F2,KEY,F3,F4,F5 where KEY is the key field
BODY.keyFieldValus 01
BODY.fieldSeparator ,
BODY.endSeparator 'nl'
For most of the cases it is working fine.
The record for which this is not working is,
AAA,,01,XXX,FFF,GGG
XI file adapter is ignoring this records.
1) I tried with some option like fieldContentFormatting but this is not working.
2) Most surprisingly if i shift the KEY to left(in place of F2), record is getting picked up properly with SPACE in the tag KEY and '01' in F2.
3) I tried using record like 126126,JJJ,01,,,GGG
Record is picked up with value in F3 and F4 fields are SPACE.
The problem is only with blank between two separator before KEY field.
Is there any other parameter which can solve the problem.
In case any body knows the solution please let me know.
With Regards
Amitesh

By making BODY mandatory with 1 record, i am getting the below given error message in Adapter monitoring...
Sender Adapter v2722 for Party '', Service 'BS_MRS':
Configured at 2007-08-29 09:40:17 BST
History:
- 2007-08-29 09:46:26 BST: Retry interval started. Length: 2.000 s
- 2007-08-29 09:46:26 BST: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 3: missing structure(s) before type 'TRL'
- 2007-08-29 09:46:26 BST: Processing started
- 2007-08-29 09:46:24 BST: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 3: missing structure(s) before type 'TRL'
- 2007-08-29 09:46:24 BST: Processing started
With Regards
Amitesh

JCA Binding error with FTP Adapter on put operation

Hi
I am facing a problem with put operation with ftp adapter. my soa service will get file from the 1st ftp server (Unix) as attachment and is putting the file on another ftp serve(Unix)r. the put operation is failing with the below error:-
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server. Error sending file to FTP Server. Unable to send file to server. Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>Unexpected termination: Socket closed</detail></part><part name="code"><code>null</code></part></remoteFault></bpelFault>
this is a SFTP server and the corressponding property is set to true on the configuration. I had also recreated the jndi again & also increased the max connections to 700, but still facing the same issue. Also i am able to ftp the files to this location through filezilla. Also i continously getting the below errors in soa_server1.out:-
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine> <BEA-000000> <Unhandled exception for ComponentDN=default/NShoreAccrualConcService!1.0*soa_9113be23-2e93-4e54-9987-2e8ae5a4b2e6/ProcessNShoreAccurals CompositeInstanceId=330020 ComponentInstanceId=330018>
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine> <BEA-000000> <This exception occurred because the fault thrown in the BPEL flow was not handled by any fault handlers and reached the top-level scope. Root cause :
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server.
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>Unexpected termination: Socket closed</detail>
,code=<code>null</code>}
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:338)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1059)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:586)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:130)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:74)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:158)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2543)
     at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1165)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1071)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:328)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4430)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4361)
     at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:698)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:555)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:673)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:293)
     at sun.reflect.GeneratedMethodAccessor1687.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105)
     at sun.reflect.GeneratedMethodAccessor1119.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy277.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:140)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
>
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-000000> <failed to handle message
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server.
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>

Error itself indicates the potential issues -
Please ensure
1. Specified remote output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Remote File System has enough spaceRegards,
Anuj

Problem with file adapter (FTP) created under business service

Hi
I am using file adapter in my receiver communication channel. I dont know the physical existance of the system so i have created one business service. Under this business system i have created a file adapter with FTP protocol. I have given all the parameters. But when i am trying to execute my scenarion i am getting the following error in SXMB_MONI.
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_SQLMediaCodeToCRMCapaign_: RuntimeException in Message-Mapping transformatio~
In RWB i am getting the following error.
Mapping Error
Execption_During_Execution
In Communication Channel monitoring I am not getting any information regarding receiver file adapter. Its not showing any message either error or sucessful. How to find whether my receiver communication channel FTP parameters configured correctly or not.What is the error. Please help me.
Regards
Sowmya

Somya,
Error clearly indicates that issue is with mapping....so there is no point of checking receiver adapter..
BTW for checking whether the FTP site is working properly or not , you can use any ftp client softwares or command prompt of windows also.
---->In Communication Channel monitoring I am not getting any information regarding receiver file adapter. Its not showing any message either error or successful.
Message has not reached up to that level so no point of looking at receiver communication channel.
Regards,

Error with file adapter

Similar Messages

Maybe you are looking for