Concurren Program run thru alert
Hi Gurus,
I have the running of PO output for communication submitted thru alert. My problem is that the alert is calling the concurrent program more than once. what causes the multiple running of the concurrent program when submitted thru alert. Please Help. I am using R12
Thanks.
HI,
pls check below link for similar discussion:-
Re: Getting Alert Notification mail multiple times
Alert sending multiple mails even when the Action level is set to 'Summary'
Thanks,
JD
Similar Messages
-
When program runs thru T-code , it exits
I have a very awkward situation. the program works exceptionally well. But now that i have created a t-code for the same the selection-screen shows up, but when i try to execute in comes out of the program.
i tried to debug, it works untill start-of-selection, but terminates and come out after start-od-selection.
any ideas how to fix this problem???Hi
Try to check the type you've assigned to your transaction, it has to be:
- Program and selection screen (report transaction)
Probably you've assigned the type for module pool: Program and screen (dialog transaction)
Max -
When I try to download iTunes 10.5, I keep getting the message "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." Therefore I can't update my iTunes to the new version. How can I solve this? I don't want to pay for technical support as this seems to be a problem with the iTunes package Apple is providing itself by that message.
Hello, hartadrian.
I would recommend attempting to repair the Apple Software Update via the steps below. Once processed attempt to download, update or install iTunes 11.
How to repair Software Update for Windows
http://support.apple.com/kb/TA24326
If you are still experiencing the issue, completely remove all components of iTunes in the order specified of the article below. Once this has been processed, attempt to download and install iTunes 11.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you experiencing errors when removing components of iTunes, follow the steps in the article below.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
So I have set up a localhost area in my Mac. I have the new server.app and I am running yosemite 10.10.2 .
I have a program running in my local server enviroment that wants to FTP to my mac .
It asks for the server , name, password, port and path. what are they?
I am pretty certain that the Serveris "localhost",
Name is my macs name (like my-mac-min)
password is "my login password"
and they suggest port 21.
But what is the file path, lets just say my site is set up http://localhost/siteftp and is actually at my Users/Sites/siteftp folder.
Why cant this program connect to the mac.
Is it because they are both operating in the same localhost enviroment,
could it be my folder permissions are not correct on siteftp folder?
Help please !I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on. -
Getting an exit value from a program called thru a shell script
how do i get the correct exit value always from a program called thru a shell script
the getExitValue of the process works fine someitmes but not always ...
Ex: write a pgm which sleeps for 5 secs & returns with exit(100).try to invoke this thru a script & try to run this script from Runtime.getRuntime.exec(..)
...the exit value is not same as 100.(it works if the sleep is not given though !!)
can nebody help??ive done that ...see the sample code for ex..
public void execute()
try{
Process program=Runtime.getRuntime().exec(cmd);
printOutput(program.getInputStream());
try
program.waitFor();
catch(InterruptedException e)
System.out.println("Command Interrupted: " + e);
System.out.println("Error status : "+program.exitValue());
catch(SecurityException e)
System.out.println("Error executing program "+e);
catch(IOException e)
System.out.println("Error executing program "+e);
.... -
Program running under UAC prompt hides mapped drives
I have a user on Windows 7 with a non-admin account who runs a program that pops up the UAC. She clicks yes and the program runs. However, since the UAC was involved, it is running with a different token than what she logged into the computer with.
This means that the program doesn't see her mapped drives when doing a File | Open. She has to navigate to the data folder on the server via Network. Needless to say this is cumbersome and inefficient.
What can I do so that the program sees her mapped drives? I don't know of a way to get rid of the UAC except to turn off UAC which I do not want to do.
JonathanHi Jonathan,
I hope this might help you.
Running Your App with Administrator Privileges
There are times that you may need administrator privileges for an application. You may write code that directly interacts with a piece of hardware or an app that sets machine-wide settings in HKLM. When possible, you should design your apps to limit the
need for admin privileges to narrow sections of code, or communicate to an application started with full administrator privileges. Aside from MSI-based elevation, there are two ways to create processes with a user's full administrator token. The Application
Information Service (AIS) will check during process creation and during the creation of a COM object using the CoCreateAsAdmin moniker to see if the
binaries require administrator privilege. It is important to note that the elevation occurs at the time of process creation. The process token never has privileges or group membership added during run time, only when it is
created.
More information:
Teach Your Apps To Play Nicely With Windows Vista User Account Control
http://msdn.microsoft.com/en-us/magazine/cc163486.aspx#S7
Making Your Application UAC Aware
http://www.codeproject.com/Articles/17968/Making-Your-Application-UAC-Aware
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I have attempted to upgrade my iPad which is necessar to downloan an app I want (My Radar). The iTunes on my computer will not process the upgrade of 10.5 without message: "There is a problem with this Windows Installer Package. A program run as part of the set up did not finish as expected. Contract your support personnel or packae vendor." ..... Little old lady needs help, my iTunes "appears to be 10.5 on my PC; however, will not upgrade my iPad. I have BitDefender as the "protector" on my PC if that is the issue.
Go to support.microsoft.com/fixit
In section 2 click on: Install or upgrade software or hardware
Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
This link may get you there: http://support.microsoft.com/mats/Program_Install_and_Uninstall/
Let it run and then try to download it again -
Firefox won't open/connect tp the internet. Explorer opens and connects. Windows firewall turned off. No other antivirus program running. Happened when I downloaded new Firefox update.
I had the same problem when i dl-ed a new anti-virus softward, but what I did help me reconnect Firefox again!
Here is what I did,
Go to open firefox browser-->option-->advanced-->network-->settings-->and change it to auto-detect proxy settings for this network!
It worked for you, hope it will work for you too =)!
Cheers -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!
I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP! -
Process name representation in a LINUX machine for a JAVA program running..
Hi,
We are using an Intel machine loaded with Red Hat Linux 7.2 OS to run JAVA programs. We have a requirement to calculate the CPU and MEMORY usage for each JAVA program running. Unfortunately when a java program is run say "java ESR" and we run a ps -ef | grep -i java, it is shown as hkumar 2847 2799 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2874 2847 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2875 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2876 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2877 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2878 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2879 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2880 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2881 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2882 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2883 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2884 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
hkumar 2885 2874 0 19:15 pts/3 00:00:00 /usr/java/jdk1.3.1_03/bin/i386/n
instead of the actual name of the program ie. ESR.
Does anybody know why this happens? Is there a way out to ensure that "ps -ef | grep java" gives the actual name of the java program being RUN?
Thanks in advance,
HarishYou have less chance to identify which programm that VM instance is running right now.
But you could (as we do) keep track of your programs if you save the process-id when you start the program.
We need this to shut down running java batch programs but you could find out the used system resources with this way as well... -
what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
"There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
Need to know because this is driving me nuts now!Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
When downloading Itunes I get this message:
There is a problem with this Windows Installer package a Program run as part of the setup did not finish as expected.
Contact your support personnel or package vendor..
is there a number for me to call or can someone explain what has happen...
Thank you for your help....Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I keep getting this message when trying to upgrade to Itunes 10.5.1
Driving me nuts trying to upgrade. What can I do to correct this?
"There is a problem with the Windows Installer package.
A program run as part odf the setup did not finish as expected .
Contact your support prersonel or package vender"Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.
Maybe you are looking for
-
I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?
-
When I import slides from iPhoto to iDVD, they lose color.
I want to burn an iDVD from photos/movies that are on iPhoto. Although they look fine in the work space, when I run the iDVD movie, about 75% of the slides lose all color or show only deep blues and purple. I have already verified the color in sett
-
Problem with a procedure in Custom Public Transformation
We have Oracle 9.2.0.1.0, OWB 9.2.0.2.8. and Solaris Sun OS 5.8. I have imported a package DWH in Public Transformation. Then I use a procedure of the DWH package in a PreMapping in a Mapping, but when I deploy the mapping I receive 2 warnings: ORA
-
I am just discovering the new 3D graph objects (LV 2010) and noticed some odd behavior. If you color the Graph object (not the plots), this cannot be undone (in other words Ctrl-Z does not work). This is fine since a simple work around is to paint th
-
After upgrading to 7.1 iTunes does not recognize iPad device
I upgraded iPad to system 7.1. I got a message to connect to my iMac and iTunes by my USB cable, which I did. iTunes no longer recognizes the iPad wirelessly and does not recognize it even when attached byUSB cable. My iPhone (4.2.1) is recognized b