Condition field for Multiple Receiver Services in Receiver Determination

Hi All,
I have a requirement where I need to send an xml to any of the two receivers base on a condition in XPATH as follows:
IF a field say abc having any value then RCVR1
IF abc is empty then RCVR2
I have tried putting  following values in Left Operand and Right Operand
abc = NULL
abc = ''
abc = ""
abc EX
but no help...Is there any way that we can check for Blank value in Condition field

left operad          operator            right Operand
abc                      EX
abc                      notequal          
abc                      EX
abc                     equal         
combine first two condition with a AND Operator for RCVR1 and also the last two condition  with a AND operator for RCVR2

Similar Messages

  • Is there a way to simultaneously add text to Comments field for multiple files?

    Is there a way to simultaneously add text to Comments field for multiple files? I know I can use Option+Comman+i to bring up the Inspector window but it doesn't have a Comments field. For example, in iTunes you can select multiple files and change metadata for any field simultaneously and easily yet when it comes to the Comments field in the Finder, this seems to be missing.
    In our production environment, Comments field is important because we place notes about what drive the file originated then when it gets transferred to LTO-6 tape via LTFS, we can quickly trace it in the event we needed to recreate the hard drive. Because tape archiving is linear, we can't store all of the files on the same tape.
    We've tried using Apple's Automator but it too seems to not have a way to batch change text in the Comments field. Any help is appreciated.

    What is "order data"?

  • OWSM and Webservices -Define policies once for multiple web services

    I thought that through using OWSM we had the possibility to use the same Policy Lines for multiple web services.
    Mostly when web services are used/integrated within an application, the same rules need to be defined and I thought this requirement could be met when using OWSM.
    But you need to define the policy requirements on each web service that's passing through a gateway or agent, why isn't it supported to define policy lines one level higher to be able to use the same requirements for multiple web services?

    Nathalie,
    For this purpose OWSM allows you to use Template Policy Pipelines.
    For individual services, you can than replace the pipeline with the Template.
    But I have to agree with you here: the templating functions are rough on the edges, e.g. limited editing capabilities.
    Hope this helps.
    Best regards, Sjoerd

  • Header line missing for multiple records in the Receiver Email.

    I have a file to email scenario
    I see the content in mapping has proper output with all the HDRs and ITMS. but when it comes throught the receiver it is missing the HDRs.
    Source
    HDR1***   ITM1***  ITM2****
    HDR2***   ITM1***  ITM2***ITM3**
    The email Body looks like the following:
    HDR1***   ITM1***  ITM2***ITM1**  ITM2***ITM3*
    I am missing the HDR for the subsequent recodrs and the subsequent items are shown as if they are the items of the first HDR1. I checked the Mapping the mapping output and it looks good, but when i actually get the email i see it missing susequent HDRs.

    When I was at a client on 11.5.10, I ended up creating a personalization on the Requisitions screen.
    If someone created a requisition with 2 ship to orgs, it raised an error.
    It was not full proof but it was deemed satisfactory by the client.
    You can consider personalization or you can modify the requisition approval workflow to include the check for multiple ship-to condition.
    Hope this helps
    Sandeep Gandhi
    Independent Techno-functional Consultant

  • Necessary Fields For Creation of Service PO of Order Type Relaese Order.

    Dear Guru,
    I have encountered an issue which i am trying to resolve...
    My this requirment will seem little okward the way i am asking but i have no way...
    The issue is I have to create a Service PO of Order type Release order (RO) using BAPI Function Module .BAPI_PO_CREATE1.
    The service PO should be of multiple Item and services for particular line item should be multiple.
    When I am creating this using ME21 or ME21N i am facing no issue.
    But when i am using BAPI Function Module .BAPI_PO_CREATE1
    i am getting following errors ;; The error which i am getting as below                                                                               
    T ID                   NUM MESSAGE                                                                               
    E BAPI                001 No instance of object type PurchaseOrder has been created. External reference:
    E MEPO              000 Purchase order still contains faulty items                                    
    E SE                   029 Please maintain services or limits                                            
    E SE                   140 Service HIRING OF LCD: please specify unit of measure
    But I am failing to findout in which field services  or limits and unit of measurement have to maintain.
    What are the necessary fields have to pass in Bapi import parameter and the table i am unable to findout.
    Please show some way how to resolve this or give me some guideline to resolve this
    Dear Moderator request your kind intervane to move this qurry into correct forum if i have asked this in wrong forum
    Thanks and regards
    saifur rahaman

    Hi Saifur
    Can you please elaborate how did you resolve the issue we are also facing same problem when we are trying to create the PO for service items through SRM it is throwing same error while creating the PO in SAP.
    Email Id : [email protected]
    Thank you in advance!!
    Regards
    Deepika

  • How to add a field for multiple file upload in WebApps ?

    I am creating a WebApp for user to save some information with multiple pitcures. I can only see a single uploader.
    How can I add multiple image uploader and How can I create a custom file upload field rather than image upload ?

    Hi,
    There's no other upload field type for web apps.  You'll need to use the "image file type" to apply multiple file upload fields within the web app form in this case.
    Kind regards,
    -Sidney

  • Condition type for deduction  in service purchase order

    Hi All,
    Our client has scenario where in transport service Purchase order, client wants to deduct some part of amount as a security fund.
    E.g client takes transport service from vendor amounting Rs. 1000 and client deducts Rs. 10  as a security fund so payment to vendor is Rs. 990. This deduction amount should go to separate GL.
    Kindly let me know how can we map this scenario? I guess we can do this with the help of condition type but dont know from where to start and what will be the nature of condition type.
    Thanks in advance.
    Regards,
    Nisha.

    Hi
    What client is going to do with security deposit? Do they settle over a period of time?
    Based on that you can do the config setting.
    Case 1) Retaining of security deposit.
    If client is not paying back and wants to keep the security deposit.  They Wants to have track record of the same. Then you can use Z condition type by copying R002 discount using M/06 and assign GL in OBYC for that condition type.
    Case 2) paying back security:
    Create Z condition type by copying any freight condition and assign GL in OBYC
    While creating PO use condition type.
    While repayment of security deposit FI will use same GL as Db and vendor account as Cr using F-44.
    Rgs

  • Conditional Pagination for Multiple Regions

    Apex 3.1.1, theme 16, Search Engine 1,2,3,4 (set based pagination)
    Hello,
    I'm working on an application that uses conditional pagination. We have a select list item where the user can choose how many result rows they want to see on a page. If the result rows returned are less than what the user selects (there is only one page of results), the pagination is hidden so the "1" doesn't display. This works great except where there is a page with more than one report region. Is it possible to restrict the $('.pagination') to each region? Maybe using the region static ID? I'm new to Javascript and Apex so I don't know how to reference the pagination for a particular region or if this is even possible. Thanks.
    Script located in each Region Footer:
    <script type="text/javascript">
      if ( #TOTAL_ROWS# > &P302_RESULT_ROWS. )
        $('.pagination').show();
      else
        $('.pagination').hide();
    </script>Lisa

    Not got jQuery installed, but as far as I understand I don't see any reason why what you suggest won't work. #REGION_STATIC_ID# is substituted in the region footer, and &ndash; in standard report templates at least &ndash; the pagination elements are descendants of the #REGION_STATIC_ID# element:
    <script type="text/javascript">
      if ( #TOTAL_ROWS# > &P302_RESULT_ROWS. )
        $('##REGION_STATIC_ID# .pagination').show();
      else
        $('##REGION_STATIC_ID# .pagination').hide();
    </script>

  • Can an image of Windows 2000 using NI-VXI 3.5 with a PXI-MXI controller be fielded for multiple computers using sysprep?

    I am trying to field an image of Windows 2000 using NI-VXI 3.5 with a PXI-MXI controller.  Can I set the system up to retain to original settings for VXI?  Some of my computers use a PCI-MXI controller.  Although Windows always finds the MXI controller, the original VXI System 0 is not used.  I have several VME instruments set up and the target is about 85 different computers.  Also the NI-GPIB interface does not show in MAX.  Is this supposed to work?

    Hello,
    Here's an update regarding the gpib error. There has been a Corrective Action Request (CAR) ID:3BI8A578, filed due to a similar issue of error gpibpnp.exe with NI-488.2 v2.2 on Windows 2000 and Sysprep. This issue's workaround involved going back to install NI-488.2 v2.1 or installing the v2.3 release in order to eliminate the problem. Currently, NI-488.2 v2.3 is no longer available for download, however, all operating systems and hardware supported by NI-488.2 v2.3 are also supported by NI-488.2 v2.4 (see link 1). 
    1. NI-488.2 2.4 - Windows XP/2000: http://joule.ni.com/nidu/cds/view/p/lang/en/id/3402. GPIB Driver Versions for Microsoft Windows and DOS: http://zone.ni.com/devzone/cda/tut/p/id/5326 
    Best regards,
    Ali M
    Applications Engineer
    National Instruments
    Message Edited by Ali M on 05-25-2010 02:07 PM

  • ADF to BPEL - Adding additional field for the web service call

    I have an existing ADF project that invokes a BPEL process. Recently I added 2 new fields to the bpel process and I want to populate this additional fields from the ADF when calling the bpel process.
    What is the best way to do this ? I dont see a way to regenerate the data control. Am I missing something ?

    correct, i am using the WS data control
    I manually added the 2 new fields in the ProjectName.xml and pagenamepagedef.xml files and also he necessary code in the bean class . But when i run it i still dont see the vallues passed to the bpel process.

  • Conditional Help for Multiple Customers

    In the company I work for we have a software product that is configurable for different customers. I have a master online help that contains ALL the components. When we are sending a particular iteration of the software to a customer with their specific set of components exposed, I have to generate a specific help for this set of components. I have all the different components conditionalised so that I can pick and choose the components needed for each customer. Development here are trying to automate the software build process and I am wondering if there is any way for our build process, via a script or something, to pick the conditionalised topics from the master help system so that we do not have to generate a new help for every customer? Any help or advice would be great. Thanks.

    Bill Albing describes what you need to know in an article on my site.
    http://www.grainge.org/pages/authoring/command_line/command_line.htm
    See - Preparing a Layout for Each Deliverable.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • I am trying to print out a contract for multiple listing service ( Real Estate)  Adobe keeps popping

    up asking to create a file . Tried that it doesn't work . Can you just get off computer so I can print the forms and send to my client for signatures?  Thank you, Laurel Barrus

    But, I'm not on your computer.
    So you're saying that from within Adobe Reader, you are using File>Print and instead of printing it wants you to save as a file? If so, look around the print menu and find "Print to file" and deselect it.
    If that's not it, can you please give us some more details about what actually is happening?

  • How to select this field  for the extractor?

    Hi Gurus, I hope you are fine!
    I need to extract the field     PRED_OPPT_GUID   form the Data source  0CRM_SRV_CONTRACT_H inside CRM system.
    If I go inside CRM to:   
    Transaction SBIW -> Settings for BW Adapter -> Maintain DataSource and Enhance BW Adapter Metadata ->
    tipe "0CRM_SRV_CONTRACT_H" and press change buttom -> Mapping TAB
    there I can see the field I need "PRED_OPPT_GUID"  but this is not selected at the "BW Selection" Column , I guess this is the cause why I am not receiving this field from the extractor, Am I right?
    If yes, How can I select this field  for the "BW Selection" Column? (the system does not allow me to click it directly)
    if not, what is the proper procedure if I need to extract this field ? because this is the key field  for  the DSO 
    " Service Orders: Header Data "
    Thanks

    This is what i can see inside the  ROOSFIELD table:
    Filtered by data source = 0CRM_SRV_PROCESS_H
    Comparison with another field:
    BILL_TO_PARTY  (working properly)    columns:        SELECTION = X              NOTEXREL= Y
    PRED_OPPT_GUID (Not working)           columns:        SELECTION = (Empty)    NOTEXREL= Y
    I think that if I try to change the Selection field to X it will cause inconsistencies with the SMOXRELP table am I right ?
    I tried to change using the system and not directly into the tables, but thaere was an inconsitecie between these 2 tables.
    Why is no able this field taking into account that this is the KEY FIELD inside the standard DSO? it has no sense to me.
    What do you think?
    regards.

  • How do I update grouping or description for multiple items?

    As the question implies, I would like to update information in the Grouping and Description fields for multiple items as a way to keep things organized. What I have discovered is that there are some quirks in the new Get Info window that were not in past implementations, which are completely inexplicable and nonsensical to me.
    For instance, when you open the Get Info window for an item that has no information in, for instance, the Grouping field, you will not see a Grouping input field, as in this screenshot. The Grouping field should be where the bottom arrow is. Notice also that the Description field is available. I will get back to that in a minute.
    If you manually double-click into the Grouping field on the main iTunes screen, you can enter the information there. Then, when you open the Get Info window, ta-dah! The field magically reappears, as in the screenshot below.
    The trouble comes when you want to edit this field for multiple tracks. If you select multiple tracks, and they do not all have the Grouping field already populated, the field does not appear. What this means is that you are forced to manually enter the information for every track! This is completely unacceptable when you need to edit information for, as in my case, 122 tracks. The following image shows the Get Info window that appears after selecting two items, one with the Grouping field manually populated, and one with no info in the Grouping field.
    Not only has the Grouping field disappeared, but the Description field, as well. Thanks, Apple, but I think I can decide for myself whether or not to populate these fields for multiple items. Let's get 'em back, huh?
    SO… does anyone know of any valid method for accomplishing this task? Without manually entering the same information in hundreds of fields? This is the future; computers are supposed to do these monotonous tasks for us, aren't they?
    Oh, please don't suggest Option-clicking to open the older, better, Get Info window, as Apple has decided that we should not have that option any longer. We apparently have to organize our music their way. Think different!

    The Add Field button was in the editors of 12.0.1 (where the new-style editors had a very "half-finished" feel)  - it is not there in 12.1.  Apple have determined which metadata fields should be available for each kind of media, with no option for the user to modify this.  In Apple's own words: "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item."
    The only options are:
    temporarily change the media kind (Options tab) to one that includes the field you want to add values to, enter those values, and then change the media kind back again
    make the relevant fields visible in an appropriate list view and edit values there - the big limitation being that you can only do this one item at a time
    I can see - to a degree - why Apple may have made some limitations so that metadata elements are available based on their relevance to different media kinds.  However, one of the issues mentioned above seems like a bug - if a single audiobook file can have a Description tab, I see no reason at all for that not to be available for multiple items of the same kind.
    If not already done so, report these issues and dissatisfaction with the "new" metadata editors in 12.1 (and the absence of a "back door" for the old-style ones) using Apple's iTunes feedback page.

  • Print fields with multiple lines

    We set the field for multiple lines in a pdf form. When
    entering info, a scroll bar appears so they can enter multiple
    lines. However, the mutiple lines don't print. If we increase the
    field height, the scroll displays when info is typed beyond the
    height and we cannot turn off the scroll.
    Also, the field is in the middle of a form and the rest of
    the form needs to adjust to accommodate the number of lines entered
    in the expandable field. How??

    I'm assuming you are authoring this pdf in Acrobat. If so,
    double-click the text box field to open it's properties. In the
    OPTIONS tab, select the "Multi-line" check box, but DESELECT the
    "Scroll Long Text" check box. This will prevent folks from entering
    more text than the box will allow (has space for). Therefore,
    nothing will be hidden when the page is printed. If you DO want
    folks to be able to put as much as they want in that box but are
    limited in space on the page, printing will not be an option as the
    printer will not realize text is hidden in that box. Hope this
    helps!

Maybe you are looking for