Condition to propose only at the time of IV

Hi,
I have a requirement where in i want to have one mark up condition which should be seen on PO
It should not have any effect at the time of GR ,but the value should be proposed at the time of IV
PO PRICE-100
MARK UP-10
GR/IR-100
STOCK-100
Invoice-100
Mark up-10
GR/IR-110
Has anybody worked on this?
Thanks in advance
Diwakar

Hi,
This has not been what SAP has designed its system.  How could you be able to clear your GR/IR Clearing account if this is set up in your system? (you can credit GR/IR 100 at the time of GR and debit it for the value of 110 at the time of IR).
What you can do, however, is to make additional posting using 'subsequent debit' option for this mark-up amount.
Cheers,
HT

Similar Messages

  • Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

    Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

    igonneau wrote:
    Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer?
    You can, but how are you going to back up those other files?  When (not if) your Time Capsule fails, you risk losing them.  See #Q3 in Using Time Machine with a Time Capsule for details.
    Then can i access these files only on the time capsule without connecting it?
    Not sure what you mean.  You have to connect a computer, either via Ethernet cable or wirelessly, to read or write to the disk. 

  • How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

    How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

    MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
    Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
    Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
    Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
    Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
    Basically the TC is about the hardest device to setup because it is lacking important networking functions.
    Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC.

  • My system boots normally only half the time

    Hello,
    I've been trying to properly boot all day and nothing has worked.
    Symptom:
    Boots to a blue screen no pinwheel or anything.
    It froze while working, the pinwheel and everything froze. So I turned it of and on. Now it won't boot normally. The only thing that was open at the time was Firefox and Entourage.
    It was actually booting normal randomly. For example out of 6 different start ups only the 1st and 3rd startup actually arrived at the login
    What I have tried:
    1 Repairing permissions (using Tiger install disc)
    2 Repairing disk (it had a minor error)
    3 Trashing the following files in single user mode as described in http://support.apple.com/kb/TS1411?viewlocale=en_US
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Library/Preferences/com.apple.loginwindow.plist
    /Library/Preferences/com.apple.windowserver.plist
    The result was that everytime I booted I arrived at the blue screen. So, I no longer had a random successful boot. I replaced the files and the random success returned.
    4 Basically I tried every step in the above knowledge base, except the OS 9 options (I don't ahve OS9), updating the firmware (I believe it is up to date), with no success.
    5 I restarted without the network cable connected. I thought this helped at first because it did start up but it continued to have random success while the cable wasn still not connected.
    6 I even renamed the entire preferences folder as described in the above link without success.
    It appears I'm running out of things to try but I haven't yet reinstalled the system, but I'm trying to avoid it.
    Any suggestions?
    Message was edited by: reydnad

    Is it possible that it could be taking an extremely long time to boot?
    This is where I'm at.
    I did ANOTHER archive and install. Boot to blue screen, but I just let it sit in the blue screen while I did other stuff for about 15-20 minutes.
    I shut it down and it booted properly! But gave me an error saying OSX unexpectedly quit upon login.
    I shutdown properly and it boots to blue again.
    An interesting note is that if I leave it a while in the blue the funs really start going. This didn't happen the time before it booted correctly...
    I'm not sure what to make of all this. Any suggestions?
    Thanks for all your help so far.

  • Saving to SharePoint works only half the time for Windows 7 Users--all the time for Windows XP users

    We have a SharePoint 2010 Environment with hardware load balancing, 2 WFEs, 2 Apps Servers and 1 SQL Server. This was built in October 2013. Office Integration and Saving back to SharePoint works all of the time for users on XP. It works sporadically for
    users on Windows 7. When Windows 7 users do the following:
    Opening an Office Document from computer and saving it to SharePoint
    Within a Document Library, using Save As from an opened document
    When selecting in a Document Library from the Document Tab> “New” and then the desired content type
    Send> Save to SharePoint from within Office Document
    They may either be brought to the SharePoint library (correct) or to My Documents (incorrect).
    In the case of number 1 (Opening an Office Document from computer and saving it to SharePoint)--using Save and Send will sometimes open the SharePoint library and sometimes open My Documents.
    Our URL is https://CompanyName.domainname.com/Sites/SiteCollectionName
    The intermediary "Sites" is actually a blank path.
    When My Documents is opened I've noted with Fiddler (a web debugger) that we get a 404 on sites:
    Could this be the issue?

    Some things to double check:
    Ensure that you have sticky sessions enabled on your load balancer
    Check that your WebDav calls are making it to the server
    Ensure that you have a root site collection in all your web apps
    Just out of curiosity, what is the http request look like for the 404 error?
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

  • How to make repricing for specific conditions at the time of billing?

    Hello
    I'm SD Pricing person. Let me ask here experts below my concern.
    In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
    So when customers buy such products, they have to pay more as recycling fee including invoice amount.
    My question is... we want to make repricing for recycling conditions when the billing is created.
    Based on our configuration, recycling condition is not defined as a kind of tax condition.
    So this value is just copied from sales order.
    (pricing type in copy control is 'G' which means repricing for tax condition.)
    In this situation, we want to make repricing for those conditions during operating system.
    Is there any easy way to cover this?
    As I think, this is not easy because the system is already operated.
    To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
    So I want to put this way to the end of my choice.
    For this requirement,
    1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
        (ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
        But transaction data are created now and all open orders will be affected.
    2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
    3. To change pricing type in copy control is almost impossible because of the impact.
    What can I do this in this situation?
    What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
    Thank you in advance.

    Let me ask agagin to all experts.
    I want to make A condition to be repriced at the time of billing.
    For this, I have to set condition category as 'L' (Generally new when copying).
    But I do not want to do in that way becauuse I am maintaining big operated system now.
    In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
    That is why I am asking.
    Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
    At last, what I want is not to be shown this condition only in billing doc.
    'A' condition should be displayed in both Sales order and Billing doc.
    And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
    Thank you in advance.

  • So after updating my ipod touch 3rd gen to 4.3.1 i noticed a lag everytime i turn it back on. it stays on the lock screen for minutes sometimes hours. the screen is usually unresponsive the only things usually changing are the time and battery percentage.

    so aafter upsating my touch to 4.3.1 i have noticed everytime i restart the ipod there is a huge lag at the lock screen. the screen only updates itself every three to five minutes only updating the time and battery status. i cannot do anything, usually it will stay like this for minutes sometimes hours. i have tried restoring it and thought updating will fix the problem but it hasn't yet. i currently have ios 4.3.3. recently i had a friend look into the ipod and he told me on a folder called damaged files he found this, 37c3ad com.apple.autowake.plist. how can i fix this?

    Try a manual install following directions in link below.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  120G Vertex 3 SSD Boot HD  

  • I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip.  Yes, I know I can add them up myself, but why?  :-)

    I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips.  Yes, I know I can add them up myself, but why?  :-)
    I am using imovie 10.0.6

    For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
    Geoff

  • How to Load Revalued Assets in FA at the time of Data Conversion

    Dear Experts,
    How to Load Revalued Assets in FA at the time of Data Conversion?? Please help me
    Thanks & Regards
    Laxman

    Let me ask agagin to all experts.
    I want to make A condition to be repriced at the time of billing.
    For this, I have to set condition category as 'L' (Generally new when copying).
    But I do not want to do in that way becauuse I am maintaining big operated system now.
    In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
    That is why I am asking.
    Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
    At last, what I want is not to be shown this condition only in billing doc.
    'A' condition should be displayed in both Sales order and Billing doc.
    And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
    Thank you in advance.

  • CIN related error at the time of GRN

    Hi experts,
    We have recd an imported consignment for one item - qty 130 MT.  Initially the qty was shifted to custom bonded warehouse.  We are receiving it partially in Lots at our plant as per our requirement.  The invoice no. is 1284 .  We have received 04 lots @ 26 MT.  We did capture excise invoice only at the time of GRN so that we can post the same invoice no. 1284 thru J1IEX at the end.
    However, when we are trying to do receive the  last consignment - Qty 26 MT . The following problem occurs :
    Gate Entry was sucessfully done but at the time of GRN when we are doing " Capture Excise Invoice only " The system gives us the error msg - Excise invoice is captured with another Purchase Order Msg no. 4F278.
    We have checked , we have not received same material from the same vendor against the same invoice previously.
    Please note first we are doing gate entry ( 103 ) & then raising GRN ( 105 ).
    Please look into the problem & provide solution.
    Regards,
    ( Rajneesh Gulati )

    Hi,
    MIGO-Multiple Line Items having different excise invoices.
    When excise invoice is referred for the second line item the error message 278(4F) '"Excise Invoice is captured with another Purchase Order' is issued.
    To rectify this, check and implement SAP Note 843490
    Bye - Muralidhara

  • How can I make the Time Capsule Icon stay on my desktop?

    I just replaced my old Airport Extreme and aging external drive with a new Airport TC.  The upgrade coulen't have been easier. Here's my question.  I occasionally want to access the TC as in external drive so I would like the TC icon to appear on my desktop all the time rather than appearing only when the Time machine is running.  Is there a way to do this?  I'm running all the latest software / firmware. Thanks and I know there have been some similar threads but they were pretty old.

    Open System Preferences (gear icon on the dock)
    Open Users & Groups
    Click the Login Items tab (next to the Password tab)
    Click the + buttton at the bottom of the list
    Use the Finder interface to locatet the Time Capsule drive and open it on the desktop
    Click Add
    Now the Time Capsule drive....named "Data", unless you have renamed it, will mounta and appear on the desktop when your Mac starts up.

  • How can I use the Time Machine Backups from my Old Computer?

    I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
    Thanks
    Richard

    Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
    http://www.macosxhints.com/article.php?story=20080128003716101
    It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
    It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

  • IE not using some CSS or JS files, some of the time..

    I'm working with a client trying to solve a problem that just started on a site I built for her.  The problem started about three weeks ago.
    It's a really simple ASP.NET site: http://nancyjoart.com/  One master page loads a common CSS bundle and JS bundle on all pages, however I used to have then unbundled and only bundled them to try to limit the
    problem.  It didn't work, but I left the bundles as they do speed the site up.
    One machine on her network constantly fails, a surface pro 2, Windows 8.1, IE11, all updates installed.  Short story:  On four pages, two public and two privately accessed, IE doesn't apply a CSS or run the javascript in the bundle.
    Here are the two public pages that fail:
    http://nancyjoart.com/default.aspx and
    http://nancyjoart.com/gallery.aspx
    If the NAV bar at the top has blue links instead of grey/black, the CSS didn't load.  If the page has no art and shows the loading GIF, or no images, the JS didn't load.
    Now the fun and amazing part: the CSS that doesn't work on these four pages, is successfully used and works on every other page.
    The CSS and JS files do actually get requested and downloaded by IE, as evidenced by a Network Monitor trace session and the F12 tools, but don't get applied (CSS) or loaded(JS) on these pages.
    Now it gets weirder:  I can run the site fine on my Surface RT and my Pro2 from anywhere else without fail.  However, if I'm on her wifi - only half the time I can't get the scripts to run or that one CSS to apply.  I press CTRL+R and
    they work fine when the page reloads, but only half the time.  In fact, it took me about a half an hour to experience the failure.  Once it happened, my dev machine would exhibit the problem, then it would work, then it would fail.
    In terms of the JS - When it fails, the debugger indicates a class isn't found.  IE has parsed and downloaded that JS file, and shows the file in the debugger file list dropdown  - but doesn't seem to use it.
    Even more odd, the request and responses all appear to happen quickly, all have 200 OK/Success results and the request and response headers look completely normal.  I've even saved the JS file itself and binary compared it to what I have on the server,
    and it matches, so it isn't somehow getting mangled in-transit.  Even more odd than this little oddity is that once the files are requested and "fail", even if you switch to a cellular connection, the next page loads, and IE doesn't NOT load
    the files correctly either.  CTRL+R eventually will get it to work on this new connection type though.
    Other things I've tried:
    Works on her wifi on:  iPhone, Windows Phone 8.1, Windows Phone 8, Windows Phone 7, Blackberry (Bold and Playbook) and her Windows 7 desktop.  I've put Firefox on her machine, and it works fine every time.   Anything in this list never
    fails, ever except ie11 on the surfaces.
    Her surface is pretty much OOB in terms of apps.  Just Modern apps installed.
    My surface pro 2 dev machine is OOB too. used daily for development - Again, site works everywhere but her wifi.
    Minifying the CSS or JS doesn't seem to help,
    Chkdsk reports nothing,
    Windows Defender is the only AV installed,
    all Windows updates are installed,
    Bundling the css and JS with webgrease didn't help,
    I've reset the IE advanced settings, security settings, cleared the cache, tried inPrivate, tried making it trusted, nothing worked.
    even reset the wifi router
    She reports other websites all work fine. (** caveat: not sure how complicated these sites are, or how frequently she does this...)
    Does anyone have any suggestions that they'd try next if they were in my sad shoes?
    Darin R.

    Hi,
    f12>Networking tab, click the start button then refresh the page to view request/response timings.
    http://nancyjoart.com/api/art/ThumbImage/fb958270-8c20-46e9-9adf-05ef6990ec85/250
    Key Value
    Response HTTP/1.1 200 OK
    Cache-Control public, max-age=36000, s-maxage=36000
    Transfer-Encoding chunked
    Content-Type text/html
    Server Microsoft-IIS/8.0
    X-AspNet-Version 4.0.30319
    X-Powered-By ASP.NET
    Date Wed, 20 Aug 2014 02:34:12 GMT
    you are sending back the wrong mime-type + it appears that you are not using response.close after streaming back the image in your asp.net code behind.
    Open a new window in IE... copy and paste
    http://nancyjoart.com/api/art/ThumbImage/fb958270-8c20-46e9-9adf-05ef6990ec85/250
    in the address bar... the image loads but the document.readyState does not reach loaded. there is no EOF in the response body and it is served as text/html not image/jpg.
    ensure Internet Options>Security tab, click "Reset all zones to default"... (IE has security settings for mime types) and also that Tracking Protection is turned off for the site (Tools>Tracking protection)
    + the defer attribute on the <script> tag only applies to script tags with a src attribute... validate and correct your markup errors at validator.w3.org.
    Post questions about html, css and scripting to the IE Web Development forum. Include with your question a link to your website or a mashup that shows the issue.
    Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
    raise a question, it's highly recommended you head on over to http://answers.microsoft.com
    Rob^_^

  • Serial number creation at the time of GI

    Dear Experts,
                   I want to create sreial number and equipment number simultaneously at the time of GI
    please hel m out with customization settings.
    Thanks
    Warm regards
    Rahul

    Using existing serial number is not giving me perfect solution.....
    there is no validation of matching serial number which has been created before for that material
    e.g.
    if i am having one line item with quatity:10
    At GR 10 serial numbers will be generated.
    at GI he can assign any serial number to any material which is not desirable in my case.
    Please let me know can we stop serial number creation at the time of GR?????
    I want it should create only at the time of GI
    Thanks
    Rahul

  • GI at the time of GR

    Hi,
    I have a requirement wherein, one particular component has to be Goods Issued automatically, only at the time of Goods Receipt of the Production order. What are the various ways / work around by which this can be acheived?
    Note: I don't want to use backflush, as GI happens at the time of order confirmation.
    Thanks.

    Hi Tao,
    Thanks for suggestion.
    In fact, in my process the GR happens in advance and the confirmations are entered later in the day (or next day).
    I am looking to GI one of the component at the time of GR and not at the time of confirmation.
    Regards.

Maybe you are looking for