Condition Type Doesn't Appear in COMMPR01
Hello CRM Pricing Experts,
I have created a custom pricing procedure called Z00001. This pricing procedure has a custom condition type called ZPR0. This in turn is based on a custom access type ZPR0 (Access=5, Table=SAP00080,E=checked, requirement=0.......based on the product).
I have also maintained the pricing procedure with Distr Channel 10 (no division, no customer proc etc.) "Determination of Pricing Procedure".
The problem is that when I create a material using COMMPR01, the new condition type doesn't appear as a valid condition type on the Conditions tab's Item Area.
What could I be missing?
I'd appreciate your help.
Thanks for your reply.
I followed the instructions you mentioned. It dawned on me that I can only have 1 entry for application CRM. This seemed like a big change so I decided not to change this and leave the CRM-> Condition Maintenance group setting as CRM->PRODUCTPRICES.
I do have one follow-up question:
Within the same screen (condition maintenance), what is the purpose of Product Category folder on the left pane. I see an entry there for CRM ->PRCAT_CRM. What does this mean? Do I have to add my item category here? Or is this something different?
Thanks
Edited by: Jamal Kazmi on Aug 29, 2009 9:18 PM
Similar Messages
-
Condition Type VPRS not appearing on some billing items
Hi,
I have a discrepancy between COPA and postings on the FI account. In COPA in transaction ke4i I have assigned the SD condition type VPRS - Internal price to the COPA value field VRPRS u2013 Stock Value.
The problem arises when the outbound delivery is split on several batches. In this case the condition type VPRS does not appear on the invoice for the split billing item and the amount 0 is loaded into to the COPA filed VRPRS for this billing item instead of value that should appear in the VPRS field. And this causes discrepancies between COPA and FI.
Do you know how to solve this problem? Is it possible to make the condition type VPRS always appear on the invoice, also in case when the delivery is sent in many batches?
Best regards,
MarcinHi
Welcome to the confusing world of Invoice *** batch split.. The situation you are facing is due to incorrect customization of your position types in SD during billing of the batch split. Plz check note 77414
You can grossly summarize it as below -
When you have batch split - the line items in Out bound delivery and biling can be divided into 2 types HPOS and UPOS i.e. Main Line items and Sub line items.. The note describes of 3 situations.. Your SD consultant will have to decide which situation you fall in... based on that config changes have to be made in SD....
If your billing is done at HPOS level (Main Item) and not at Item splits level or Vice Versa - Then T codes VOV7 and VTFL, you have to make settings accordingly in the fields "Biling Relevance" and "Cost"..
Also, the item category of HPOS and UPOS has to be different - One has to be relevant for billing/Cost and the other not
Apart from VOV7 and VTFL, check your settings in T code 0184.. Your Item catg has to be assigned against :
Delivery Type / usage Type= CHSP/ Item category Group = "Norm"
To correct the invoices already posted, cancel them and repost after making the config changes...
Regards
Ajay M -
Some type doesn't appear during preview
I can see the type animation when I press enter on the keyboard for the timeline to play but when previewing it, some of it doesn't appear for some reason.
Also I am using Macromedia Flash 8, Windows Xp, and wondering if it the file will be compatible with the latest flash version available?
thanks for any helpUh how?
What did I do differently with the ones that do appear? This is ******* retarded. -
SPED output type doesn't appear when goods issue done
I have made goods transfer from one storage to another via two-steps procedure. Both storages have WM.
So I create UB order (Me21n) -> outbound delivery -> transfer order. Then I approve the transfer order and the goods issue is done automatically. In this moment SPED output type has to appear in outbound delivery and to create inbound delivery.
SPED settings are:
dispatch time - 4 (Send immediately when saving the application)
transmission medium - 8 (special function)
req. routine - 408.
The problem is that after goods issue done via transfer order approving I haven't SPED in outbound delivery. I need to open the delivery to change (SPED appears) and save it. Can it be solved by any standard method or only by ABAP?Hello Mihailo
Thank you for your answer.
I think so too but I hope it can be another way. It's really strange situation because I see that the delivery status is updated after the goods issue. So the devilery is re-saved. But the output document doesn't appear.
How you solved it in your expirience via change the delivery in background by ABAP or via any new req. routine? -
Condition Type Value Not appearing in Purchase Order
Dear All,
I have created a condition type and assigned it to a Pricing Procedure. Correct value is being captured in <b>Scheduling Agreements</b> but in <b>Purchase Orders</b> the Condition value is being captured as zero (All fields for SA and PO have same values). I have already assigned Correct Pricing Procedure to Purchasing Docs (As correct PP is being captured in SA and PO). Please Assist even if you have a slight idea.
Regards,
SudhanshuHi Sukdev,
Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
Regards,
T.R.S.Praveen -
Pricing ZCondition Types are not appearing in Condition Record Maintanence
Hi All,
We have a requirement in SAP CRM Opportunity Management where the pricing determination should happen. So, to facilitate the requirement we have done the following
Downloaded the DNL_CUST_CNDALL and DNL_CUST_CND from ECC to CRM
But the Problem is when I am trying to maintain the Condition record in T-Code "/SAPCND/GCM" our Z-Condition types are not appearing in the list, also in Product Master Condition Tab.
Please suggest me how to resolve this issue.
Regards,
karthik JHi Karthik,
As a best practice -
1. If you are downloading the condition type and pricing procedure from ECC, then it is advisable to use ECC as a master system for all your Z condition type/condition record maintenance.
2. Similarly if you are using Pricing procedure as of ECC, then ensure that the downloaded pricing procedure in CRM is used for pricing procedure determination.
3. The condition record in T-Code "/SAPCND/GCM" is advisable to use if you are mainly using CRM Pricing.
By looking at your problem statement you are using ECC pricing procedure, condition types by downloading it to CRM.
If you have any other comments to make, please give the exact problem statement or any appropriate problem screenshot for further analysis.
Hope this will be useful
Thanks and Regards
DJ -
Condition type not appearing in PO line item
Dear All
I made a condition type Y001 for agriculture tax with below mentioned config. and marked as both header and item condition.
Cond. class A Discount or surcharge
Calculat.type A Percentage
Cond.category B Delivery costs
Manual entries C Manual entry has priority
Now problem is that when I am making contract in contract line item condition Y001 condition is appearing in dropdown and I am able to enter the same in contract and save it.But when I am trying to make a PO by referring the same contract with line item condition Y001, this same condition is not appearing in PO and also it is not appearing in dropdown also so that I can manually enter the same.
Please let me know why system is behaving like this.
Regards
SKsatish kumar wrote:
In short condition type Y001 is appearing in contract line item condition tab while making contract but same condition is not appearing in PO line item condition tab while making PO.
Hi Satish,
Perhaps you have not assigned the pricing procedure to the Purchasing Orgn & Vendor in IMG Schema determination. Have a chk once and if you have assigned try maintaining a PIR and I hope it should populate the priceing procedure and your cond type Y001 in the PO also.
Anything pls revert
Regards
Shiva -
Excise condition types not appearing in the Delivery document pricing
Hi,
This is a scenario of sales from an Exciseable Plant.
The client has pricing requirement at delivery document.
I have configured the pricing at Delivery document, but the Excise condition type (JEXP) does not appear.
We are maintaine ED values at control code level and control code field is not availabe in LIPS, i tried adding the field in LIPS structure but still the ED condition type does not appear as program is not identifying the control code field in delivery.
Can you please let me know the solution for bringing Excise condition type in the Delivery document pricing procedure.
Regards
VenkatChanged the Condition Category from 'F' to 'L'.
-
Forgot to put ZPNT (Penalty condition type) in sales order
Dear Expert,
We have created sales order and billing document has been sent to customer,after that we came to know tht we forgot to put ZPNT Condition type in sales order. Now i want to create another sales document with reference to billing document, in which only ZPNT Condition type will be appear (not other condition) and thn will create billing document with reference to new sales order so that ZPNT amount goes to the right ledger A/C......Is it the right process to solve this problem if yes thn please advise me how to fonfigure the system.
Regards
Parul Deshwalhi Parul,
rather than doing this which is quite complecated process
saying complecated because, when u do Copy from billing to sales document all condition will appear and might be there r some mandatory conditions in pricing procedure which you can not remove.
Above all, IF your condition ZPNT value is based on some other conditions then also it will not be possible for you to calculate it correctly.
there is one more possible way by creating DEBIT NOTE with reference to sales order but again you might have to face above mentioned problems
So better you follow standard and easy method
1. Reverse the billing document if PAYMENT is not posted
2. Reverse the Delivery (if any)
3. add your condition type to sales order for line item and create it
Regards -
How to get the created condition type and make it possible to view it in PO
Hi,
Can anyone tell me how to make my condition type created will appear in the condition type selection list.
Regards,
SairamDear,
You can see the <b>Pricing Procedure</b> & the<b> condition type</b> & analysis in the <b>Conditions</b> tab of the item detail of the PO.
Pl note the pricing procedure attached to the vendor thro' the <b>Schema group Vendor</b> and analyse for yourself by creating a PO for this Vendor.
Thanks ,
Nagarajan -
Condition types for a info record
hi can someone pls tell me how do i config the following scenario :
my client has 10 condition types
out of which 5 condition types should compulsorily appear in my Po
and remaining 5 should default from inforecord...however even in info record , no other condition types apaty from this 5 condition types should be allowed .....that is in all my info records only these 5 condition records are allowed for a clientHi Joyti,
For this u have to ---
1.COpy condtion type PB00 and make new condition type sap ZB00
2.Copy pricing procedure RM0002 to say ZRM002.
3.Delete PB00 contion type from ZRM002 and replace it by ZB00.
4.Maintain only 5 contion types in this pricing procedure which u want in inforecord.
Thats it. Now when u will try to created inforecord - only these 5 contions type which r entered in pricing procedure ZRM002 will be seen .And when u will Create Po the Pricing procedure which u have created will be triggered based on Vendor and pur. Org .
Thank you
Reards
Amar Zarkar -
Hi friends,
I have a scenario where i put the condition type for packing charges in the sales order as manual condition,But when i do an invoice that condition type does not appear .
1)Do we have to put that condition type of the packing charges manually during proceessing the billing document?
2) I have posted the invoice to accounting without the packing charges.Is there any provision where i can go and manually put the condition type and realease it to accounting?
Please suggest solution
ajayHi ,
Thi sproblem occurs bcos of the copy controls in the copy controls u hav configured like this that new pricing will be carries in the invoice so that conditon type is not copied to the invoice, at present there is no chance to chane the invoice bcos alreadt accounting document is generated, so the best practise cancel the invoice and again do the invoice with that conditon type, in future if u want to doesnt happen this got VOFA and select ur invoice documen ttype and remove the value in the field "Document pricing procedure" and save and change in the copy control in the tcode VTFL change the "pricing " As "c" and save.
Reward if it is useful.
Regards,
kishore. -
Vendor in condition type/purch info record
hi,
in condition type, i notice in account determination, there is a vendor field. but this vendor field not exist in all condition type. only freight/customs related with this vendor field.
1) may i know how does the system know whether the condition type needs vendor field or not.
2) in purchase info record, can we defined second vendor as transporter on top of first vendor which is supplier? if can where can i defined as i cant see second vendor in PIR.
thanks
rgdsHi,
1) may i know how does the system know whether the condition type needs vendor field or not.
Ans:- While creation of Condition type in SPRO we put the condition category as D that is deleivery costs. This determines that this condition type can have Vendor field.
2) in purchase info record, can we defined second vendor as transporter on top of first vendor which is supplier? if can where can i defined as i cant see second vendor in PIR.
Yes you can. Select the COndition type button which appears on top of info record change/creation. Then choose the validity date. Then enter the delivery condition type for e.g FRA1 which is standard one and enter the amount then selet this condiin type and clik on details button or F6 key you will see the vendor field.
Thanks
Shashi
Please give points if info is help ful -
ZPRS- Cost(data source H) condition type is not visible in CRM sales order
Hi Colleagues,
I created a sales order in ERP. In the sales order the condition type ZPRS- Cost(data source H) is available. I downloaded the this sales order to CRM i can able to see the ZPRS condition type in sales order.
But when i create a new sales order with the same data (BP, Material,Sales organization) the condition ZPRS is not visible in the sales order. When i checked the PRC_TRACE it is showing the error as "Condition with external datasource has not be found".
Can any body help me in this issue.
Tanks and Best Regards,
RajeswariHi Michael ,
Thank you very much for your answer. I just require one more confirmation from you.
Could you please confirm If we post a returns document in CRM system directly the "ZPRS or VPRS - Cost" Condition type will not appear in the return document condition types.
Untill and unless it is a billing document in CRM system the "cost" condtion wont appear rt?
Could you please confirm it.
Thanks in advance for your help.
Best Regards,
Rajeswari -
Hello,
I have a item level condition type ZMAT. This condition type will be applicable when you order a material XXX with qty 5 and there will be 10% discount. Suppose we create an order with material XXX and qty 3, still this condition type ZMAT is appearing in condition tab with amount the discount amount as ZERO.
I don't want to appear this condition type in case if the material XXX is having qty less then 5 in an order. Please help me how to fix this issue.
Thanks,
ShreekantIn your pricing routine, check if qty is less than 5 then set sy-subrc = 4.
Maybe you are looking for
-
I am trying to use Adobe Flash player at home to simply surf the web. For a long time I've been getting prompts to update Flash Player and however much I updated it the prompts kept on poping up. This got so frustrating I decided i'd try to fix the p
-
1.Where do i see the workflow for a purchase order. 2. There are 6 status in purchase order, can someone give me the link or document about the status? Regards Sudharshan
-
Logitech pro 9000 webcam - irks only partially with my mini
hi bought this cam a few month ago cause the sales guy told me it works with mac too. when connecting to my mini and using skype the camera itself works fine and is recognized as a logitech cam. however, the build in mic is shown as "unkown usb devic
-
The find box (previous and next) has just stopped functioning while I was reviewing a pdf file. How can I resurrect it?
-
Libraries won't upgrade after new iPhoto install
Yesterday, with help from a tip, we got our new iPhoto to intall on iBook. Opened one library and upgraded it. However, I have four other libraries (some stored on external drive), that show the albums, but no photos inside (thumbnails). Any suggesti