Condition types for Insurance and Duties - Export sales

Hi Friends,
Please let me know the condition types i can make use of for capturing the Insurance and duties paid during export salesand also the condition type for capturing the commission.
Thanks
Ivy

Dear ivy
You can create zee condition types on your own and maintain the required datas. I am just give you one example for insurance.
Go to V/06, copy some standard discount condition type and rename it as ZEIN and maintain the following:-
Cond. class:::::::::::::::: A
Calculat.type::::::::::::::: A
Cond.category::::::::::::::C
Rounding rule::::::::::::::::Commercial
Plus/minus::::::::::::::::::::blank
Manual entries:::::::::::::::D
Amount/percent::::::::::::::X
Value::::::::::::::::::::::::::::X
In V/07, you can maintain the following tables
033:::::::::Incoterms
307::::::::Customer with Release Status
So in VK11, either you can maintain the insurance percentage for Incoterm or Customer, so that whenever you generate sales order with multiple line items, this condition will automatically bifurcate the insurance percentage. Also the most important is that in your pricing procedure, against this condition type, you have to assign EIN as Account Key.
thanks
G. Lakshmipathi

Similar Messages

Condition type for landing and clearing charges for imports

All SAP Gurus,
Which standard condition type to be for Condition type for landing and clearing charges for imports?
Regards,

If both Condition types are Quantity basis then you can Create New Condition types by Referring FRA1 & FRC1 Condition types.
Else Create New Condition types called ZCCH for Clearing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Condition Category B
Plus/Minus A
Also in Control data Check Accruals option and in Scales tab give Scale Value as 2 if want.
Create New Condition types called ZLNC for Landing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Plus/Minus A
Uncheck Accruals options and save.
Regards,
Ashok

Condition type for Insurance

Hi all,
Can anybody tell me what is the condition type used for Insurance in SD pricing procedure.
thanx & regards,
Praveen.

Hi Praveen,
You can create your own conditon type using Z or Y( ZINS or YINS) with T.Code V/06.
and Please maintain the Access Scequence for this condition type.
And ensure that For the Condition type Insurance,
Condition Class - A - Discount and Surcharges
Calculation type - - Based on your client Requirement and
Condition Category - C - Insurance
and remaining fields based on your client requirement you can set them
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Condition Types for Packing and forwarding

Hi ,
We wanted to add packing and forwarding charges to the material cost, please tell me what condition type / confuguration i need to use .
Regards
Swapna

HI,
You need to create Z condition type by copy condition class Discount or surcharge and Calculation type Fixed Amount.
i.e. Condition type FRB1- Frieght value will work.
Step 1) Create by coping FRB1 Condition type, Change name i.e. Pack For Val.
Step 2) Change control Data 1)
Condition Class - A (Discount or surcharge)
Calculat. Type-B(Fixed amount)
Further changes will depend upon your required ie. You want to create Header condition or item condition.

Condition type for NCCD and Cess

We are using TAXINJ Tax Procedure.
One Vendor is Charging NCCD(1%) and CESS(0.125%) .So in Tax Procedure we want to Include NCCD and Cess.
Is there any SAP Standard Condition type as available or we can create our own condition type.
Regards
Sathish

If both Condition types are Quantity basis then you can Create New Condition types by Referring FRA1 & FRC1 Condition types.
Else Create New Condition types called ZCCH for Clearing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Condition Category B
Plus/Minus A
Also in Control data Check Accruals option and in Scales tab give Scale Value as 2 if want.
Create New Condition types called ZLNC for Landing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Plus/Minus A
Uncheck Accruals options and save.
Regards,
Ashok

Problem with multiple condition type for VAT &CST

Hi,Gurus,
pl. suggest the procedure for the following problem.we configured seperate pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
now I am facing the following problems.
1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of ZVAT/ZCST.
Now I would like to know is there any procedure to assign the Material type and Customer Account group to Tax category.
Thanks & Regards
sam

Hello Sam,
The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields Taxclassification3-Customer and taxclassification3- material. For ZSCT
Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
Please add New Condition table in the access sequence with the required Field
And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
In Document the values will be flown correctly after changing this.
Hope I have Solved your Query.
If any Doubt please revert.
Regards,
Rohit Dongre

Reference condition type wrt IV01 and PI01..

Hi PPL,
Can u plz explain Referrence Pricing condition wrt to the condition types :
IV01 and PI01,
Both are condition tyres pertaining Inter company ,IV01 has a Reference condition Type PI01 assigned to it.
What does it mean in the inter company scenario.Points for sure..:-)
Best Regards,
Subbz..

Hi,
PI01 condition type represents costs to Ordering company code (in other words revenue to supplying company code).
It is statistical condition type & meant for information purpose only.
Condition records for PI01 are created with the following key combination:
Ordering sales Org + Supplying Plant + Material
PI01 represented under pricing procedure RVAA01 is reference condition type for IV01 and the same is defined in the condition type IV01. Due to this these two condition types represent same value.
The condition type IV01 in intercompany billing document represents revenue to the Supplying Company. But its corresponding condition type PI01 in the billing document to the end customer is shown as a statistical item meant for information purposes.
The use of two different condition types in Intercompany billing is necessary to ensure that data is transmitted correctly to the financial statement (Component CO-PA).
Hope this provides you with your answer,
Regds,
Rupali

Condition type for Excise Duty

Dear All,
I have to maintain a new condition type for excise duty @ 10.3%, at present the excise duty is non deductible and the CIN is not activated and not used.
It should also have the option to manually input the tax value at the time of creating a PO.
Kindly Help...
Regards,
Prashant

Thanks for your reply SNB..
Excise duty non deductible means that they have not defined any condition type for Excise and its totally new
Yes, its through tax code and the tax procedures are to be used.
The client has only provided the rates i.e, 10.3% and a g/l account for Excise in which this amount should get posted to automatically.
Kindly Suggest..
Regrds

Condition type for VAT A/R

Can anyone suggest the condition type for VAT in MM
and also suggest if it is to be incorporated in Pricing procedure or in TAX procedure.Also let me know this condition type for deductable and non deductable case.

u have to create VAT Condition type then attached to tax inn at plant level.where u could maintened vat % ,
Then u have to combine material and vat into fv11 for this vat conditon for only vat rfeceivable.
for vat paybale u have to maintained customer/vat combination into vk11.
regards,
devendra

Duplicate condition type at item and header level

hi all,
please help me to implement this
issue:
PO condition type for header and item should be checked for duplication.
atanu

Hi
I am not sure whether we can do this with IMG.
Need to use User exit MM06E005 (do not be confused with the description of this enhancement..you can use it)
Best regards
Ramki

List of sales condition types for a material

Hi,
I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
Please let me know how I can view the list of sales condition maintained for a specific material.
Thanks.

Hi Giri,
Thanks for the response.
In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019? We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
Please let me know how to view the list of condition types.
Thanks

Create a new condition type for tax... and assign in the Tax determniation

Hi,
I need to add custom condition tax type, i tried creating the condition in OBQ1 and add that condtion in FI pricing OBQ3, now I want to confirm what is basic conept means whenever we create on condtion in OQB1 and add in OBQ3.
i need to add that in Sales order and need to maunally populate that in the sales order.
could anybody suggest to create a new condition type for tax.(full process).
Thanks
shankar

Hi,
Goto the T.Code "V/06".Create one new "Z" condition type.
Maintain the Condition Class as "D(Taxes)".
Calculation type as "A(percentage)".
Cond. Category as "D(Tax)".
Select the tick mark for "Group Condition" if it is applicable for you.
In the next step assign this condition type to your pricing procedure by using the T.Code "V/08".
Also maintain access sequence by using the T.Code "V/07" and assign it to your Condition type.
Now this condition type will appeared in your sales order after maintain teh condition records.
Regards,
Krishna.

Which Access sequence will use for sales tax condition type for TAXINN

hi.,
which Access sequence will use for sales tax condition type for TAXINN procedure.pls give one example (Access sequence) and give fields.
Because i couldnot create the condition record,the system not accepted for tax indicator.
Regards.,
lakshmanan

We also got the same problem with our client and escalated it to SAP.
they advised to use the access sequence JIND which consists of condition tables in the order given below
Step Condn Table
10 354
20 355
30 40
Attach this to your condition types.
Rewards if it helps.
Regards,
Anbu

Addon for Insurance and Insurance Brokers

A new addon has been developed for Insurance and Insurance Brokers by Alexander Moore. Addon already has been implemented in LLOYD's Coverholder and collaborate with a portal solution. Useful info in: http://www.alexandermoore.com/main/index.php/insurance-menu

Dear ivy
You can create zee condition types on your own and maintain the required datas. I am just give you one example for insurance.
Go to V/06, copy some standard discount condition type and rename it as ZEIN and maintain the following:-
Cond. class:::::::::::::::: A
Calculat.type::::::::::::::: A
Cond.category::::::::::::::C
Rounding rule::::::::::::::::Commercial
Plus/minus::::::::::::::::::::blank
Manual entries:::::::::::::::D
Amount/percent::::::::::::::X
Value::::::::::::::::::::::::::::X
In V/07, you can maintain the following tables
033:::::::::Incoterms
307::::::::Customer with Release Status
So in VK11, either you can maintain the insurance percentage for Incoterm or Customer, so that whenever you generate sales order with multiple line items, this condition will automatically bifurcate the insurance percentage. Also the most important is that in your pricing procedure, against this condition type, you have to assign EIN as Account Key.
thanks
G. Lakshmipathi

New condition type for freight

hi,
i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will trigger

hi,
as you have to have three condition types for sales order
ROAD - VENDOR1 - ZVE1
RAIL - VENDOR2 - ZVE2
ROAD - VENDOR3 - ZVE3 - into sales order.
create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
with
LEG 1 - ROAD - VENDOR1 - ZVE1
LEG 2 - RAIL - VENDOR2 - ZVE2
LEG 3 - ROAD - VENDOR3 - ZVE3
create a Z table which captures the information for this.
and link this table to FB70 - t.code
and settle it individually as per FFA.
balajia

Condition types for Insurance and Duties - Export sales

Similar Messages

Maybe you are looking for