Problem with multiple condition type for VAT &CST

Hi,Gurus,
pl. suggest the procedure for the following problem.we configured seperate pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
now I am facing the following problems.
1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of ZVAT/ZCST.
Now I would like to know is there any procedure to assign the Material type and Customer Account group to Tax category.
Thanks & Regards
sam

Hello Sam,
The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields Taxclassification3-Customer and taxclassification3- material. For ZSCT
Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
Please add New Condition table in the access sequence with the required Field
And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
In Document the values will be flown correctly after changing this.
Hope I have Solved your Query.
If any Doubt please revert.
Regards,
Rohit Dongre

Similar Messages

Condition Type for VAT

Hi,
Is there any Standard Condition Type for VAT (both deductable & non-deductable) & Service Tax?
Also we want to maintain excise related information thru J1ID for Materials to be procured externally from vendors. Is there any additional configuration to be done?
Regards,

Dear Aditi,
Please find the following details as required by you
Conditions related to VAT:
JVRD- A/P VAT RM Deductibl   (JVRD is with reference to JIPC)
JVRN-A/P VAT RM Non Deduc (JVRN is with reference to JIPC)
JVCD-A/P VAT CG Deductibl (JVCD is with reference to JIPC)
JVCN-A/P VAT CG Non Deduc (JVCN is with reference to JIPC)
JVCS      A/P CST Non Deductible under VAT (JVCS is with reference to JIPC)
JSTX-A/P ServiceTax (JSTX is with reference to JIPC)
You will have to incorporate it in TAXINN
And you will have to maintain the Conditon for Plant/MAterial and vendor combination in FV11
with % of VAT and TAX code (it can be created by FTXP (input/Output tax))
Account keys for The Above condition types
EC1     A/PE-CessExcise
EC2     A/PECess-ServiceTax
EC3     A/PSECess-ServiceTax
ESA     Outputacquisitntax
ESE     Inputacquisitntax
JI6     A/PSECEss
JP4     A/PCSTNonDeductib
JP5     A/PVATRMDeductibl
JP6     A/PVATRMNonDeduc
JP7     A/PVATCGDeductibl
JP8     A/PVATCGNonDeduc
NVV     Non-d.inputtaxdist
ST1     A/PServiceTax
VS1     Salestax1
VS2     Salestax2
VS3     Sales tax 3
VS5     InputTaxPSTGross
VS6     InputTaxHSTs/a
VS7     InputtaxGSTs/a
Hope it will help you
Regds
shailesh

Condition type for VAT A/R

Can anyone suggest the condition type for VAT in MM
and also suggest if it is to be incorporated in Pricing procedure or in TAX procedure.Also let me know this condition type for deductable and non deductable case.

u have to create VAT Condition type then attached to tax inn at plant level.where u could maintened vat % ,
Then u have to combine material and vat into fv11 for this vat conditon for only vat rfeceivable.
for vat paybale u have to maintained customer/vat combination into vk11.
regards,
devendra

Problem with pricing condition type in case of proforma invoicing

Hello All,
the problem is related to a pricing condition type in case of proforma invoice where the details are as follows -
Name of Condition Type - ZADC - Add 10% on Cost                                         Access seq.   Z038 Diff
                                                                                Plus/minus    A Positive
Cond. class - A Discount or surcharge
Calculat.type - A Percentage
Cond.category - Blank
Manual entries      D Not possible to process manually
Amount / Percent - Checked
Item Condition - checked
Scale Basis - Quantity
Currency Conversion - Checked
Quantity Conversion - Checked
This condition type has been kept as statistical in the pricing procedure. Still in the proforma invoice the condition type is not getting reflected automatically , whenever I am updating with " carry out new pricing " option the condition type is getting populated.In case of other commercial invoices this very condition type is getting populated automatically without any updates.Along with this point to be noted is that the Condition type in which the actual costi is captured has been kept active.
What more needs to be configured or what are the changes to be done to populate the condition type automatically as statistical during the time of proforma invoicing?
Thanks & Regards
Priyanka Mitra

Hi,
Kindly do the pricing analysis and check whether you have the following error such as
Inactive condition type because of subsequent price,
Regards,
Ravi

Condition type for inventorising CST

All SAP Gurus,
We want to inventorise CST amount, which condition type can be used for this?
Regards,

hi,
Create one condition type JVCS and assign the NVV key .
its the key NVV which will inventoried the value of any duty or tax.
regards,
sujit

Issue with new Condition type..

Hi,
I want to create a Condition Type for VAT %, where we can insert value like...
5% on 60% of Basic Price OR
3% on 70% of Basic Price OR
1% on 80% of Basic Price
Note: - We have try with New Tax code and it's working... But through it, we require mew Tax code as per change condition..
That's why we require a Condition Type for variable %...
Please guide...

Hi,
You can do this through two ways.
Option 1
Add new condition type in tax procedure and Make access sequence say with doc type and tax code.
So for old PO's make the variable condition as 100% and for the new ones you need to create that many tax codes.
Option 2:
Write a routine for alternate base that is to be attached in tax procedure. Make a condition type in MM pricing procedure that is statistical and calculates value on base price. Read this base price in the routine. So with this you will not make that many tax codes.
Regards
Sangeeta

Calculation formula userexit not working for multiple condition types

Hi,
we have a problem in the CRM ISA-B2B scenario where the custom user exit is only working for single condition type.
but we need it for multiple condition types .
the value of the subtotal is not being retrieved for multiple conditions. at a time only one condition value is being retrieved and shown in the webshop - shopping basket.
for ex:
we have scenario 1 where Y001 -Freight condition type is applicable for one customer.and Y002 is applicable for another customer.
when we are trying to show the subtotal condition value in the webshop by using a single custom user exit in the pricing procedure it is only working for either of the above 2 customers depending on the VMC cache status.
is there any problem if use the single user exit for both condition types?
and if it needs to be differentiated how exactly we can do that with the same logic in the java class.
Thanks in advance,
PSR.

Hi Arshi,
below is the code:
public class ZValFormula_ZZWI1 extends ValueFormulaAdapter {
     private static String zzwi = "ZZWI1";
     private static char zzwiC = '@';
     private static UserexitLogger userexitlogger = new UserexitLogger(
     ZValFormula_ZZWI1.class);
     public BigDecimal overwriteConditionValue(IPricingItemUserExit item,
               IPricingConditionUserExit condition) {
          ICurrencyValue val = condition.getConditionValue();
          userexitlogger.writeLogDebug( "value saved for " + zzwi + " (" + zzwiC + ") = "
                    + val.getValueAsString());
          item.setSubtotal( zzwiC, val.getValue());
          return val.getValue();
hope this would give more idea to look at the problem.
Thanks,
PSR

Problem in Sales Order with specific condition type.

Hello Experts,
I'm facing a problem in sales order creation for a specific condition type.
the actual scenario is as below,
We have created a new condition type for special discount.This condtion type is applicable only for specific sales channels.Also the discount percentage has to fetched from a custom table.
To achieve this I've written a user exit "RV64A999"
In the FM, i've calculated the subtotal and fetched the discount percentage and calculated the discount amount. After implementing this, the SO were been created properly. for all the line items the discount amount was getting calculated properly.
But then I added a condition at the top of code in exit that the calculation for the new condition type should happen only for selected sales channels.
But after adding this condition in code, i'm facing problem. Now when I create/ change any SO, the discount amounts are getting calculated incorrectly. I'm getting discount amount even if the line item subtotal amount is zero (0).
Any help or pointers reagrding this issue will be very helpful and highly appreciated.

Hi ..
Check your config. again or debug the routine code with your ABAPer and find the problem area.
-Maharshi

Shipment cost for multiple condition type is not working

Dear Experts
I am doing inbound transportation,I have a freight condition, FRB1, and two fixed cost condition type ( ZX01 and ZX02).
I maintained 3 condition type under T_06, and created condition record.
Now when I am doing shipment costing system is taking the last assigned condition type relevant condition record value, however it is pulling the other two condition type in the pricing procedure and with information message.
Could some body suggest how to bring all 3 condition type value effective for shipment cost.
Thanks & Regards
Sudhansu

Hi Durga,
Most importantly whenever we create a condition type with statistical check box it means that value will not be included in Net price calculation this is the only purpose of statistical check box.(Like any freight charges it will go to your stock a/c even though statistical check box is there in your Pricing procedure)
When you create condition type for any charges with Cond.category B Delivery costs and Accrual check box in M/06 by default it will go to stock account, but you can restrict that by using a functionality
Check this link for complete process
http://wiki.sdn.sap.com/wiki/display/ERPLO/PostingplanneddeliverycosttoNon-inventoryaccount

Condition types for works tax, SDT,MANDI TAX

Hi All,
are there any condition types for the following:
Mandi Tax,
other taxes(any other taxes)
state development taxes,
works tax
entry tax
it is required to create condition types and put in pricing schema in po or these condition types are defined in tax code and are copied in pricing procedure.
thanks and regards

thanks for giving your valuable time,
We are on ECC 6.0, and these conditions are not appearing in the condition table. I could not go thru these conditions. I referred the SAP NOTE NO 9552289, validity since 8.1.2007 where in the attachment of TAXINN with screen shot is there.
Further clarification
In the forum it was mentioned JVRD - VAT Non deductible and JVCS - CST deductible, is it a typing error. My writing is not for pointing you as wrong, but for taking the understanding.
I appreciate your knowledge and great understanding on subject.
regards

Condition Records For Tax Condition types for SAP 4.7

Dear Experts,
What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
Is there any other procedure to maintain Tax condition types for SAP4.7.
My Pricing procedure that i maintained in V/08 is Z00001.
Regards
Jyoti

Hi Jyoti
Since you are not using CIN, you can do the follwing for tax conditions
Check the assignment of the TAx procedure to country
once u do this , you will be able to maintin the vendor and customer records for MWST type for taxes
then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
hope this helps
thanks
Akasha

Assign cost object by condition type for accounting

Hello All,
Our scenario is that we have a single billing line with a service order assigned as the cost object on the line item. This line has multiple condition types going to different GL accounts on the RV document.
Once the service order is on the billing line all of the RV document lines get the same service order for cost object assignment We want to assign different cost objects (service order, internal order) to the different lines on the RV document based on the GL account.
Example:
Billing document line 10
Material 123456
Service order 999999
Condition type           GL                      Desired Cost Object
ZZ01                      480000                  999999 - service order
ZZ03                      560000                  11111 - internal order
ZZ04                      470000                  999999 - service order
ZZ05                      440000                   22222 - internal order
We have the multiple GLs getting assigned, it is just the cost object on the RV document that is a problem. Is there a way to do this in config...or is a user exit the only option?
Thanks in advance!
Edited by: Allison Sains on Jan 20, 2012 7:01 PM

Thanks for the response. It looks like we're going to try and rework the account assignment so a user exit is not required (use OKB9 instead).

Condition types for Insurance and Duties - Export sales

Hi Friends,
Please let me know the condition types i can make use of for capturing the Insurance and duties paid during export salesand also the condition type for capturing the commission.
Thanks
Ivy

Dear ivy
You can create zee condition types on your own and maintain the required datas. I am just give you one example for insurance.
Go to V/06, copy some standard discount condition type and rename it as ZEIN and maintain the following:-
Cond. class:::::::::::::::: A
Calculat.type::::::::::::::: A
Cond.category::::::::::::::C
Rounding rule::::::::::::::::Commercial
Plus/minus::::::::::::::::::::blank
Manual entries:::::::::::::::D
Amount/percent::::::::::::::X
Value::::::::::::::::::::::::::::X
In V/07, you can maintain the following tables
033:::::::::Incoterms
307::::::::Customer with Release Status
So in VK11, either you can maintain the insurance percentage for Incoterm or Customer, so that whenever you generate sales order with multiple line items, this condition will automatically bifurcate the insurance percentage. Also the most important is that in your pricing procedure, against this condition type, you have to assign EIN as Account Key.
thanks
G. Lakshmipathi

MM-PUR default scales for condition types for service (ME31K

Hi,
We have faced the following problem:
The business case was, to have default scales for certain condition types for a service for a purchasing contract.
We didn't find it in SAP, so we wrote an OSS. SAP answered that it's not possible now, nor in the future.
So we decided to look around in SAP, and found out that it was half possible.
I've abused the exit USEREXIT_XKOMV_BEWERTEN_INIT of program RV61AFZB.
In this exit I provide the internal table staffel for program SAPMV13A with the correct information (via ASSIGN ('(SAPMV13A)STAFFEL[]') to <staffel>.)
In this way, if a user adds a service, this exit will get reached and the scales are filled. If the user then clicks on conditions and then double clicks the condition type with the scales, all the default scales are shown to the user. If you then click on save, the next screen is the service screen, if you then click on save again, all the date is stored in the database. (bit of a work around, but this works)
However, I can't figure out how to save the scales data, when you only add a service and then push the save button without viewing the conditions. Quite logically actually because I'm skipping two whole screens with pbo and pai modules, in these modules internal converting takes place.
Has anyone encountered this problem before and how did you solve it then ?
Alternatively what is the SAP standard way to add pricing condition scales on condition types of a service of a purchasing contract? As you know there is no BAPI yet to change/create a purchasing contract.
I was thinking, to add the scales by updating the tables directly via ABAP, I know that's not a clean way to do it, although it isn't too risky.
Kind regards, Rob Dielemans

Dear Rob,
Is this solution properly working for you?
I think my problem is similar: purchasing outline agreement (contract) refuses to apply relevant scale prices in the item line. Always uses the first price - without considering order quantity depencies.
Regards,
Tamás
Edited by: Tamas Szabo on Mar 31, 2009 3:50 PM

Condition type for Amortisation cost

Dear friends,
I hve created condition type for amortisation cost in pricing.
It is adding the value for the gross price+ amortisation cost and flowing it to calculation of excise Duty in BASB.
For ex.
P001 - 1000
ZDIE - 100
so BASB - 1100
Excise Duties are calculated on 1100...That is also OK
But when the calculation of CST- As per system it is calculated on 1100 (BASB)....
And here client requirment is to calculate on P001(Gross Price).
Again calculation of
A/P Price + ED + VAT it is taking A/P Price as 1100.
Our requirement is to take it P001 as 1000.
How to take amortization cost to be considered only for the calculation of excise duties and rest calculation in tax procedure being considered on Gross Price.......
Plz. suggest
Thanks in Advance,
navin

I hope you have searched regarding the topic.
Refer following SDN wiki link for all your anwers:
- [ EK01/EK02/VPRS |http://wiki.sdn.sap.com/wiki/display/ERPLO/VPRS,+EK01(ActualCost)andEK02(Calculated+Cost)]
Regards
JP

Problem with multiple condition type for VAT &CST

Similar Messages

Maybe you are looking for