Condition value upto four decimal places
hi experts
client has some group of material these material made by difffrent material compounds,
these materials are purchasing under the condition of IEEMA organisation
every month material compound rates are chaning ,accoring to main material rate also chage
for achiving this we worte a routine ,in the routine we used the condition type
on condition type value is 0.1432 but in sap allows only two decimal point how can achive four decimal points for that condition type
regards
vijay
You are speaking about purchasing as I understand.
In this case you can define this in the PO itself (for the line item; there's also a condition tab in PO at item level...) - Amount / Currency / Per / Unit - 1432 / RS / 10 000 / PC. You can do the same in contract, info record, etc.
Edited by: Csaba Szommer on Jun 22, 2010 8:55 AM
Similar Messages
-
Price upto four decimal places
Hi ,
I am using Basic planning objects for estimation of project.
I havea item whose price is to be calculated on percentage basis.For Example Price o item X is 0.25% of Value Y.But when I am putting rate of that item as 0.0025 ( INR )system doesnt excepts this is also same for quantity.Since the decimals are restricted upto 2 for Price & upto 3 for Quantity.
How this can be solved ?
RgdsHi Shrikant
I made the settings & tried to put in the Quantity field of ECP but following error is shown by system.
Too many decimal places (maximum 3)
Message no. DB739
Diagnosis
You specified 4 decimal places, but the field allows only 3 decimal places.
System Response
Unable to continue processing.
Procedure
Correct your input.
Rgds -
How to restrict decimal values upto two decimal places?
Hi all,
I want to restrict decimal figures upto two places. How to do that? Help will be appreciated.
atanu
[email protected]You can use NumberFormat class.
There are lot of threads available in this forum. Just search for the keyword 'NumberFormat'. -
Rounding Rule upto 3 Decimal Places in Tax Condition(SABRIX)
Hi,
We are Using SABRIX for Tax determination and need to round up Condition Type XR1- XR6 to round upto 3 Decimal Places.
Do we need to To Change ALT Calc Type- 301306or Alt Cond Base Value -- 16 or have to change Currency decimal Places in transaction OY04/OY03.
Kindly Suggest.
Thanks
AmitHi,
Tax % for customer is decided in SABRIX, Where does TaX calculated?? In SABRIX or in SAP.
Thanks
Amit
Edited by: AMIT GUPTA on Mar 31, 2010 10:54 AM -
Problems of setting values% with 2 decimal places in any graphics. What sho
Guys, I have the xcelsius 2008 and can not make it work chart with values % and 2 decimal places. Already set up everything that I know the spreadsheet and graphics.
Someone knows what can I do?
Thanks Anderson - Sao Paulo - Brazil.Hi Anderson,
To get values in % and upto two decimal, follow the below steps:
Go to Chart properties-> Appearences Tab-> Text tab.
Select the "Vertical Axis Labels" and go to the Number format present below in the window.
Change the format to "Percentage" and set decimal places to "2".
This should work.
Please revert incase you have any queries.
Thanks,
Amit Mathur. -
Convert amount with four decimal places to amount with two decimal places
Hi,
for specific reasons we have set the prices to four decimal places. However, in an invoice the staff needs to see all prices with two decimal places. Therefore I have created new user-defined fields which should show the rounded values However, I have not yet found the right formatted search that outputs the value with two decimal places including currency symbol.
The statement
SELECT $[$38.20.NUMBER]
outputs the value with two decimal places which is fine, but it does not contain the currency.
The statement
SELECT $[$38.20.0]
outputs both value and currency, but the value still has four decimal places as the original price.
And the statement
SELECT CAST($[$38.20.NUMBER] AS VARCHAR(20)) + $[$38.20.CURRENCY]
outputs a value with even six decimal places.
Did anyone already have the same problem???
Or does anyone have any idea???
Thanks and regards
CorinnaHi again,
the value should be displayed in a user-defined field of the screen.
The result of the query
SELECT $[$38.20.NUMBER]
has already two decimal places, so that I do not need a round here. But the currency is missing.
When I add the round function to the query
SELECT $[$38.20.0]
it does unfortunatly result in an error.
Any ideas????
Thanks so much in advance! -
Quantity upto Four decimal points
Hi,
In Easy cost planning , I want to put quantity upto 4 decimal places but system allowing only upto 3 decimal.
Pl suggest. It is very urgent.
rgdsHi Venkat
Thnks for the efforts.
In CKCM , i selected My characters but field in that are uneditable. Can u explain briefly.
Rgds -
How can I limit a double value to two decimal place?
How can I limit a double value to two decimal place?
Java keeps on adding zero's to a simple double subtraction:
1497 - 179.64 = 1317.3600000000001The answer must have been simply: 1317.36If the trouble is with output ...
If the trouble is with value accuracy ...The trouble is with OPs understanding of and/or expectations of IEEE 754 floating point numbers. o_O
[And it's probably a view (output) issue.]
how can i actually use numberformat to cut those
unwanted decimal places?Read the API - Puce already provided the link. -
Any function module to round of a value to two decimal places?
Hi gurus,
Any function module to round of a value to two decimal places?Hi,
you can use FM 'ROUND'.
Thanks. -
How to correct a double value to two decimal places
hi,
How to correct a double value to two decimal places
eg.
double tt=100.100032
i want to correct to 2 decimal places
ie tt=100.10
regards,
jaganCheck my other reply on the other thread. Please don't cross-post.
-
Rounding a number upto two decimal places.
Hey !
My question is regarding the rounding of a number in such a way that answer that we get after the rouning comes upto two decimal places,no matter how small or the large the number before rounding was.
Somebody please help me.
thankshi,
use BigDecimal class in java.math package.
here is some code how to do it ..
BigDecimal bd = new BigDecimal(your number here);
bd.setScale(2,BigDecimal.ROUND_DOWN)
System.out.println(bd);
hope this helps ...
bye
ashok -
Caluclation in P.O. Conditions shall be upto 04 decimal place.
Hi All,
Please help me of getting foure decimal points in PO conditions.
ThanksThe dec0imal places relating FI only. The FI people has to configure to require decimal places. you can try with the following settings in FI.
1.in OY04 maintain Currency and No.of decimal places required for all purposed.
2.in OB90 maintain company code, currency and maintain rounding unit. -
Storeing values in floate data type upto two decimal places
Hi
I want a float type field in my table but want to store value up to two decimal places.
so what syntax i need to follow plz suggest.
thanksit is not possible to store with Number datatype. if you are using the data to sho report, then change its format (like 45 to 45.00). if you want to store 45.00 in database, then you have to modify the datatype for that column. for this follow the following path
1. Add a column of datatype Varchar2.
2. Copy all the value of your number field to it.
3. Drop the old column.
4. However make sure that if you have used that column somewhare in arithmetic calculation, the modify it and use to_number function to do arithmetic opration. -
Hi Gurus,
Plz consider follwoing.
There are two field
1. plmk-toleranzob it has some floating value.
2. plmk-stellen. it has ineger value.
I have to pick value from field <b>plmk-toleranzob</b> upto decimal places equal to value of <b>plmk-stellen</b>.
How can we do it.
points will be rewarded.
regards
RajeshDATA: X TYPE P DECIMALS 2 VALUE '12493.97'.
WRITE: /X ROUND -2, "output: 1,249,397.00
/X ROUND 0, "output: 12,493.97
/X ROUND 2, "output: 124.94
/X ROUND 5, "output: 0.12 -
Quantity column display upto 2 decimal places in ALV
I've created an ALV for dynamic columns. For this i've first created the fieldcatalog and then the internal table.
The problem that i'm facing in this is that the user wants the quantity column to be displayed upto 2 decimals. For this i tried the following:
1.) wa_fldcat-decimals_o = '2'
wa_fldcat-decimals = '3'.
wa_fldcat-datatype = 'QUAN'.
with this i tried that let the calculation be to 3 decimal places but on output it should show 2 decimal places.
But this doesnot gets reflected on ALV. It still shows 3 decimal places.
eg: 3 decimal places: 16.667 + 16.667 + 66.667 = 100.001
2.) wa_fldcat-decimals_o = '2'
wa_fldcat-decimals = '2'.
wa_fldcat-datatype = 'CURR'.
I also tried doing the calculation with 2 decimal places with datatype CURR but with this the last digit gets rounded.
eg: 2 decimal places: 16.67 + 16.67 + 66.67 = 100.01
Now we are taking total as 100 %. So tha calculative total cannot be more than 100.
On seeing 100.001 user says show it to me to 2 decimal places i.e. 100.00
On seeing 100.01 user says how can the total be more than 100 & this is .01 more than 100.
Therefore how can the 1.) option be achieved.
PLZ HELP!Hi,
Can u check this one
DATA: gv_packed TYPE p DECIMALS 2.
CATCH SYSTEM-EXCEPTIONS conversion_errors = 6.
MOVE char_field TO gv_packed.
ENDCATCH.
IF sy-subrc = 6.
error handling
ENDIF
Try to move ur char field to a type p field. If char field is other than numeric then u will get error that can be handled in try...chatch..endtry block.
data: l_val type p decimals 2.
parameter my_val type char20.
try .
l_val = my_val.
catch cx_root.
Do ur error handling here
endtry.
you can work with search and concatenate.
value1 = 3601152
search value1 for '.' .
if sy-subrc eq 0.
concatenate value1(5) '.' value1(2)+5 into text.
Or value1 = value1 / 100.
endif.
Thanks.
Ashok.
Maybe you are looking for
-
Voicemail not working at all!
I just upgraded from my original iPhone to the 16gb iPhone 3G and seem to be having issues with visual voicemail. I restored my iPhone from my old backup and everything else is working just fine(no connection issues or dropped calls for me thank good
-
Please how do I handle this? I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an unknown error message that it cannot be downloaded and the code of the message 1015.
-
Doubt about which driver to use for ATI Technologies Inc SB600 IDE
Currently this is what I get with lspci -v 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP]) Subsystem: Device 1631:c109 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at 01f0 [size=8] I/O po
-
Using iMac instead of Apple TV
I've had a google around and can't seem to find any answers that answer my question. What we're looking at is the following: We plan to get a new iMac 2.5ghz quad core, and connect it to a tv screen to use as a secondary monitor. However we also want
-
Any good back up program other than Outlook?
I would like to find a freeware or shareware app to back up my iPhone contacts into a file that I can copy and transport on a flashdrive, then run from another laptop. (Outlook not installed on the 2nd laptop.) Any suggestions? Thanks