Conditional disable no longer works

   We have a large application that calls modules dynamically. It has been working in LV 8.2. We compile the main program and use "Source Distributions" to distribute modules for individual installations. Thus these modules are LV source code in directories that the .exe calls dynamically.
   Two of our modules use DAQMX, so the distributions get understandably large. Since the DAQMX is an option that most customers don't use, we incorportated a Conditional Disable structure around them and used a custom Conditional Disable key. We set this key's value in the project before creating the source distribution, so that we can choose whether or not the DAQMX sub-vis are included in the distribution. This all worked fine in LV 8.2.
   We recently upgraded to 8.6. Now the distribution includes the DAQMX sub-vis regardless of the conditional key. I thought that maybe the condition got "disconnected" in the upgrade process, so I created a new key, deleted and replaced the conditional disable structure, but to no avail.
   Worse than just having the sub-vi's included in the distribution, even though they have been supposedly removed, the fact is that if the DAQMX drivers are not loaded on the target machine, the VI is broken and won't run. Even though the VIs aren't using the DAQMX sub-vi's, they are broken because the associated dll's are missing.
   I looked through the forums, and though I found a number of messages about the Conditional Disable, I couldn't find anything specific about this issue. Is this a known issue? Is there a work around?
DaveT
David Thomson Original Code Consulting
www.originalcode.com
National Instruments Alliance Program Member
Certified LabVIEW Architect
There are 10 kinds of people: those who understand binary, and those who don't.

I've created a test project that demonstrates the issue. It works as expected in 8.2 and 8.5, fails in 8.6. You'll probably need to change the Source Distribution destination in the project before you Build, or you can just use the Preview function to see what the build would do. I've played a bit with the "Additional Exclusions" options, to no avail. Note that we DO need to include sub-vis from vi.lib in order for our system to work, and that this is still OK in 8.2 and 8.5. The DAQMX sub-vi's are only included when the conditional disable key is set appropriately. In 8.6, they are included regardless of the Conditional Disable key, AND their inclusion results in a broken calling VI when the DAQMX driver hasn't been installed.
David Thomson Original Code Consulting
www.originalcode.com
National Instruments Alliance Program Member
Certified LabVIEW Architect
There are 10 kinds of people: those who understand binary, and those who don't.
Attachments:
Cond Dis 8.zip ‏24 KB

Similar Messages

IOS 7.1 update problem. Wifi disabled, no longer works. Disappointed with apple response

I have several IOS devices and updated each of them to Apple's release of IOS 7.1.
Unfortunately my iPhone 4s did not update successfully. It was affected by the widely reported issue regarding WiFi being disabled permanently. After the update to IOS 7.1, wifi is no longer an accessible option on the IPhone 4s.
After doing some online research and identifying this as a common problem, I tried some of the suggestions available online such as resetting settings and restoring from backup. None of these suggestions worked.
I brought the iPhone 4s to the apple store at the Rideau Center in Ottawa, Ontario, Canada and spoke to one of the employees. He stated that it was not an apple issue and that it was a problem with my phone that would cost $200 to resolve. He said that it was not a problem related to the ios 7.1 update and that it was a "coincidence" that it happened at the same time as the update to ios 7. 1 and was probably an issue with the wifi chip.
It is surprising to me that applying an update recommended by apple and using the iPhone 4s in the manner in which it was designed (using wifi) would cause this basic function (wifi) to cease to function.
Wifi is an essential part of my day to day use of this device. I am appalled that apple is denying the problem and has no resolution for it.
If anyone else this problem, please go to your nearest apple store and let this forum know your experience in getting the issue resolved.

Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

The spry pop-up menu I built in Adobe Dreamweaver worked fine in my old Firefox, I updated Firefox today and the menu no longer works--despite disabling the pop-up blocker in Firefox preferences...what's the problem??? I need the menu to work!!!

I built a new pop-up menu for my website using Spry in Adobe Dreamweaver. Because of some differences in .HTML and .XHTML
it took me days to get it right. I tested every variation in Firefox until it worked perfectly. Today, I installed the newest version of Firefox and now the pop-up no longer works. I changed the preferences in Firefox to disable to pop-up blocker and it STILL DOESN'T WORK...although an older style of pop-up menu (menu machine) which is no longer supported by Adobe, DOES WORK.
HELP!!! THIS IS IMPORTANT.

pixlor:
OP is using CS3 and the menu blog is talking about the menus
in earlier
versions of FW, so *most* of the points made in the blog
don't apply.
That's not to say that using CS3 pop-up menus is a *good*
thing....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixlor" <[email protected]> wrote in
message
news:gbce7b$a50$[email protected]..
>
quote:
Originally posted by:
captainbianco
> I agree completely and totally, and I will haha but I'd
like to get this
> one
> fixed if I can. You can view the page here
>
http://www.flooringanswers.com/nysurfaces/index2.htm
> Hover over the letters to see the pop-up menu's. The one
over "t" is the
> problem.
> Under Flooring, for example, you have a div with id of
> MMMenu0910163730_1_1
> (ugh). Under that are four items and they have their own
IDs:
> MMMenu0910163730_1_1_Item_0
> MMMenu0910163730_1_1_Item_1
> MMMenu0910163730_1_1_Item_2
> MMMenu0910163730_1_1_Item_3
> MMMenu0910163730_1_1_Item_4
>
> Your CSS file, however, doesn't have location
information for the ..Item_4
> object.
>
> That's just from a quick, cursory look. In order to fix
this, you're going
> to
> have to go through it line by line and debug it. By the
time you do this,
> you
> might be better off getting something else and starting
from scratch.
>
> Read this:
>
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
>

The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

Yoga 13" - Touch Pad not disabled in tablet mode/F6 No longer works.

I have updated all of my drivers from the Lenovo Yoga 13" site. I read on here to pay special attention to the Synaptics driver, mine is 16.2.21.4 from Synaptics. When I flip in to tablet mode my mouse moves around when I touch it. Also the F6's "disable touchpad" doesnt work.
Its really annoying to not be able to use it as intended. Anyone have a fix for this?

hi OmegaNine,
Sorry to hear what happened,
1. Can we Try this,
Go to Control Panel / Programs and features/ uninstall a program
    Look for the Synaptics Software, Uninstall it there.
2. Go to Device Manager and look under "mice and game controllers" and make sure it does not say Synaptics there.
              If it Does Uninstall it as well and put a check on the box if it asked "delete driver software"
If the system did not asked you for a restart, Restart the system Manually.
Open Device Manager again and open the category Sensor
like on this photo
     http://www.codeproject.com/KB/system/wiisensor/wiisensor11.png
Uninstall everything under Sensors but DO NOT put a check on the delete driver Software.
Restart
Download and install this driver
       Synaptics TouchPad Driver for 64-bit Windows
Restart after installation and Check if You still have the Issue.
Hope this helps
Cheers!!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Link to A folder View in a PDF Portfolio - feature no longer working - please advise

Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
This used to work for me - very important feature that no longer works. Please advise a workaround.
Steps:
1. Start a PDF Portfolio that contains files and folders
2. Open a PDF in the Portfolio
3. in the opened PDF click Add or Edit Link
4. Define a link area and set it to Go To A Page Vies
5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
thanks!
Alejandro Collados-Nunez
Graphic Designer | Art Director
| e: [email protected]
| w: www.1lb.ca

There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

HT204416 My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. Select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
3. If the above steps don't resolve the problem, please describe it in more detail.

Home Sharing no longer works between iTunes and Apple TV.

I've been through all the forums, tried all the solutions provided and I have come to the conclusion that Home Sharing just no longer works between iTunes on a PC and my Apple TV. Does anyone know if this issue will be addressed or should I list my Apple TV up on eBay? (along with my iPad, iPod, and iPhone, since all system no longer sync together as before.)
My issue:
My iTunes library is no longer listed under "Computers" on the Apple TV.
The airplay icon no longer shows up in iTunes. (Version 11)
I cannot play music/content from my iPhone or iPad via remote that is stored in my iTunes library through my Apple TV.
I can however play music/content that is stored locally on my iPhone and iPad through my Apple TV.
My firewall settings are allowing access to Apple TV.
After logging into my router, I see no issues there.
I've logged in/out, turned home sharing on/off, de-authorized/authorized, and restarted my PC, Apple TV, and Router.
All devices are logged into the same iTunes account, and are on the same wireless network.
Time for a solution Apple.

If you turn off wifi on your Computer and connect it to the apple tv using an ethernet cable can you see your library under computers in Apple TV.
If yes the issue is with your wifi not the Apple TV
You may want to try the troubleshooting article
I also found this article
iTunes Home Sharing Not Working
Not working and sometimes when it is working, it cuts out in the middle, or when you click on the computer name, the focus goes away from the library. In other words, really weird.
What it is
iTunes has a feature called "Home Sharing" - it basically allows you to share your entire or part of your library with other instances of iTunes in your home network. It requires you to login to your iTunes account on both computers. A typical scenario is to enable Home Sharing on your desktop machine and then access the library from your iPad, Apple TV, iPhone, Mac, etc.
In my case, I have iTunes on my desktop machine running Windows XP in the attic with Home Sharing enabled and then I access the library from my Macbook and Apple TV, depending on what I want. How to use Home Sharing can be found here.
Symptoms
Home Sharing machine not showing up in Apple TV or the Macbook
The Macbook home sharing not showing up on my desktop
Home Sharing working intermittently
Connections getting cut of intermittently
Usually, restarting iTunes or the desktop computer will make things work.
Sometimes, restarting the Macbook or the Apple TV will make things work.
The "working" doesn't last long
The FixOn the desktop computer where the Home Sharing is enabled, I disabled the "QoS Packet Scheduler" from the network connection:
Open Control Panel
Open Network Connections
Right-Click on your connection (in my case, it was "Wireless Network Connection 4"
Select Properties
Uncheck "QoS Packet Scheduler"
Click OK
Restart iTunes if necessary
After doing the above, Home Sharing worked like a charm.

DVI to S-Video TV out no longer working

I have a Macbook Pro 2.4ghz Core 2 Duo, bought mid 2007. Up until December last year I have been able to use an Apple DVI to TV adapter to display on a TV. For some unknown reason this no longer works. To find a solution I have tried plugging things in different orders, deleting preferences, creating a new user but nothing works. It may have happened after a Mac OS X Leopard update but I cannot be sure.
What I do know is:
- the DVI port still functions on an LCD, using a DVI to VGA adapter or just straight DVI.
I've read about failing video cards etc but I don't think any of these apply to my model. I believe it might actually be a software issue...
Has anyone had any success with recent versions of Leopard and connecting a TV?
Thanks.

turns out the dvi to s-video converter was kinda sorta broke, I had to jam the cable down into the s-video and rca plastic piece, I guess it wasnt making a perfect condition. Oh well works now.

My iTunes got deleted off a (no longer working) computer. Is there a way I can transfer all content from my iPhone onto iTunes on a new computer? I want to update my phone, but do not want to lose any music off it when syncing it.

My iTunes got deleted off a (no longer working) computer. I have lost all music & data that was on this original itunes. Is there a way I can transfer all content from my iPhone (music & photos) onto iTunes on a new computer? I want to update my iphone (3GS), but do not want to lose any music off it when syncing it. Help please!!

By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are using a new computer, your phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else, as Apple makes no provision to do so:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under iTunes>Preferences(under the edit menu if using Windows)>Devices in itunes.
2. Make sure you have one contact & one event in the supported applications(Address Book & iCal or Outlook, Windows Address Book) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, DO NOT SYNC at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go.

Linking to a Folder View of a PDF Portfolio - feature no longer working - please advise

Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
This used to work for me - very important feature that no longer works. Please advise a workaround.
Steps:
1. Start a PDF Portfolio that contains files and folders
2. Open a PDF in the Portfolio
3. in the opened PDF click Add or Edit Link
4. Define a link area and set it to Go To A Page Vies
5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
thanks!
Alejandro Collados-Nunez
Graphic Designer | Art Director
| e: [email protected]
| w: www.1lb.ca

There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

Onboard Mac Lan no longer works after 1.9 update!!!

I was using bios v1.8 and both my Mac Lan and my Giga Lan were working perfectly fine. Now that i updated to v1.9 my Mac Lan no longer works but my Giga is fine!!!
My Mac Lan still gets an ip address from my router, but i cannot ping the router nor anyone else on the network and my internet does not work!! So right now im using my Giga lan but i want my other one working like it was.
I tried going BACK to v1.8 but it did not fix the problem, so i went back yet again to v1.9 and im still left with the same problem. Ive tired disabling it and re-enabling it in both the bios and in windows and still nothing. Ive also tried re-installing the drivers and that did not work either. I even ran a Winsock Fix but that didn't fix the problem either.
Is anyone else having this problem besides me? what can i do to fix it???

Download new bios and extract it to a directory where you can find it (root of c:\ if you are lazy like me). Run wminfo if you are paranoid about losing your mac address and copy it down for your nvidia adapter.
Restart windows in safe mode. Close every application down in task manager.
Run winflash as described below and CHECK ALL THE RIGHT BOXES TO UPDATE BOOTBLOCK AND TO CLEAR THY CMOS. Read Syar's description below as that is what I used:
Quote from: syar2003 on 30-July-05, 00:24:48
No , floppy flash is not neccesary !
Can use
C:\Program Files\MSI\Live Update 3\FlashUty\Award
winflash.exe
Place checkmarks on bootblock/dmi area/update all/clear cmos
During flashing you see it will verify the programming of the bios chip .
And the good thing is unlike dos flash you can redo it if it fails , just by starting taskmanager and kill winflash.exe
and start over (as long as the machine isn't powered down or restarted).
I always say no after the flashing when asked to restart , exit the winflash utility , make a normal shutdown , turn off PSU for 10 seconds , then turn back
on , enter bios and load optimized default , followed by a boot to build/update dmi pool .
Kill all unwanted apps in the systemtray before running winflash and dont have any other applications running .
Best way is to boot to windows safemode .

Computed page item no longer working after upgrade to 1.6

Hi team,
I noticed that the pages where I was using conditional computations based on sql queries for setting the value of items are no longer working as before.
If I run the page in debug mode however I see that the computation is actually performed and the correct value is retrieved indeed. The value is also present in the session window.
This values are used inside chart region titles, but for some reason they do not show up.
Are you aware of any known problems?
In case you want to check, the application is 21670, page item is P64_CATEGORY_NAME (page 64, of course) and it is recalled inside the chart region's title.
Thanks,
Flavio

Flavio,
I think it's working now. The source type of the item was 'Always..' and the source was 'Always null'. Changed to 'Only..' and 'Static Assignment'. The computations are working right, as you said. It was just that the item's current value (in the memory arrays) was null and that's what was used in the &ITEM. substitution.
Scott

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong v

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong version of backup.

Answer is no.
If you want the iCloud backup you have to have n internet connection, thus WiFi.
The not working WiFi has happened with quite a number of users.
It is not exactly clear what is the cause but there are suggestions to clear it up:
Some people have had success by removing an apostrophe from the iPhone name. If your iPhone is called something like “John’s iPhone” then this might work. Go to Settings > General > About > Name and change it to something with no apostrophe.
Some people have reported success by putting the iPhone into Airplane mode and then going to Settings > General > Reset > Reset Network Settings, but the problem may return.
You could also try going to Settings > Control Center and disable Access on Lock Screen then turn your iPhone off and on again.
Make sure that your router firmware is up to date.
Try backing up your iPhone and then restoring it. Check how to factory reset an iPhone for details.
If nothing is working for you, try contacting Apple or take your iPhone into an Apple Store.
Succes, Lex

All of a sudden my Enter key no longer works in SQL Developer.

All of a sudden my Enter key no longer works in SQL Developer. I don't know how I managed to disabled it. Can anyone tell me how to re-enable it?
I already tried the following:
- I closed the application and re-opened it. - It didn't work
- I re-started my machine. I didn't work
Help! Thank you

The same thing has just happened to me and this was very useful to correct the problem --- but now I am wondering why or how this happened. To the best of my knowledge, I haven't make any setting changes so why did I lose the Enter action?

Conditional disable no longer works

Similar Messages

Maybe you are looking for