Condtion value is set from next step

Hi,
There is acceess Sequence Z230 with access no 10,20,25,30,40 all are set exclusive in t code V/07
I expect access 30 to be found for condition type Z260 in the Billing price determination for. There are no condition records registered for the accesses 10,20,25 , but there are record both for access 30 and access 40. All access level steps are set to exclusive which means that if a condition record is found then only this value should be used and next access level should not be checked.
'Getting message condtion record exist but not set' and result for condition record in analysis tab shows the value from 40
instead of 30.
/P
Edited by: PKUPADHYAY on Oct 26, 2010 11:44 AM

Hi,
You get this error sometimes if the condition record was created during the creation of sales order. Exit the order and try to create the order again, it may help.
Regards,
Palani

Similar Messages

SSIS Variable Expression not Picking Up the value dynamically set from a Foreach Loop container

Hello, everyone,
I have three variables in my SSIS package:
1) ReportLoc that holds a file path (c:\test, not changed)
2) ReportFileName that holds a file name that get assigned in a Foreach Loop container (file1, file2, etc.)
3) OutputFilePath that is the full file pathname, set in the expression: @[User::LocalPath] + "\\" + @[User::ReportFileName]
All three variable have the package scope.
I expect OutputFilePath will be asigned values like c:\test\file1, c:\test\file2, etc.
However, it alwasy remains an empty string.
Anything I did wrong? Any help and information is greatly appreciated.
Regards

That's it -- I forgot to set Evaluate as Expression to true.
Thank you very much for your reply and solution! Really appreciate it!
Regards.

TS1398 In "Set Up" I try to select our secured WIFi router from the list of available networks. However, it will not allow me to select it. This then prevents me from going to the next step. What do I do?

In "Set Up" I have tried to select our secured WiFi router from the available list shown. It is listed. However, when I try to select it, it will not check off or remain blue when I lift my touch. This then will not allow me to go on to the next step. What do I do to connect to a secure WiFi router? I do know the WEP Key number but there is no place to type then in.
Alice from Hart

The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

How to use a variable value set from custom dll in dataset

Hi,
I've inherited a SSRS report that I need to add some functionality to. I'm setting a variable, ADAuthorizations, from a custom dll
ADAuthorizations is a string of all AD groups a user is a member of and I need to use this as a filter in a dataset. I've tried using this variable as shown in the query below but I'm getting an error "The expression used for the parameter 'Unit_Permissions"
in the dataset "Unit_Permissions" includes a variable reference. Variable values cannot be used in query parameter expressions." Is there another way I should go about doing this?
= "SELECT UnitCode, UnitName " &
"FROM dbo.VW_Unit_Permissions " &
"WHERE UserId in (" & Variables!ADAuthorizations.Value & ")" &
"ORDER BY UnitName "
Thanks,
Robert

Please follow below steps,
1. Create a custom code to get all the users in an array,
Public Function getUserName() As String()
   dim Users(1) as string
   Users(0) = "user1"
   Users(1) = "user2"
return Users
End Function
2. Create dataset using the below query,
SELECT UnitCode, UnitName FROM dbo.VW_Unit_Permissions ORDER BY UnitName
3. Add a parameter @User and set properties : (Datatype as text, Allow multiple values, Visible)
Under "Available Values" select specify values and set the label and values as expression.
=Code.getUserName()
4. Similarly for "Default values" as
=Code.getUserName()
5. Go to tablix properties and select the filter tab and set the properties as below,
- Select Expression "UserId" i.e =Fields!UserId.Value
- Operator as "IN"
- Value as =Parameters!User.Value
6. Preview the report.
Regards, RSingh

Is binding Mail step one way ? how do i send values to next step type

hi,
Is binding Mail step one way ? how do i send values to next step type. In mail task i calculated few values and sent it as mail i want those values to be sent to an activity how do i do that.
Regards,
Hari

Are you using asend mail task. If so i Think there is no requirement to bind the value from Wflow to task.
If you are using a Method other than send mail task you can bind the container element.
But I could not understand what you are doing in the method of sending mail?
Thanks
Arghadip

Once I receive my Network Access Code(N.A.C.) for iphone 5 what are the next steps I follow to unlock my phone from vodafone to use on another network???

Once I recieve my Network Access Code(NAC) for my iPhone 5, what are the next steps I follow to unlock it from vodafone to use on another network???
I have my other nano sim ready and waiting to port my number to it, but im just waiting on vodafone to email me the NAC code, which i checked up that I was eligible for!!!

Ok many thanks for telling me this BUT 1 last thing, once vodafone get back to me then is it just a matter of plugging my iphone into itunes and letting it sync? Like will a message be displayed or anything on screen letting me know or confirming that the phone has been unlocked...???

Hi there. I bought and downloaded photoshop elements 13 today. When I tried to set it up and was prompted for the serial number, the one I was given and subsequently entered ( correctly ,I checked numerous times) was seems invalid. What's the next step?!

hi there, I bought and downloaded Adobe photoshop elemts 13 today. When trying to set it up, I was prompted for the serial number which upon being entered was deemed invalid. I know the serial number is the correct one. What is the next step, how do I contact Adobe store?!?

Error "The serial number is not valid for this product" | Creative Suite
if that doesn't help, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Compare step values and set document to incomplete, if value is negative

Hi All,
I am looking for standard feature of SAP to set the document incomplete, if the difference of the two steps value is negative.
e.g
Step     CT     Value     SubTot     AltCal
10     ABC     10          D
20     XYZ      20          E
30     Total     (-10)                    12(std cal type Subtract Subtotal D - E)
Now the requirement is to set the document incomplete when the step 30 value is negative. Using custom routine it is feasible but I am looking for standard, if any.
The idea is to check value of step 10 and 20, if the value of step 10 is less than step 20, then set the document to incomplete.
Not necessary to check negative and then set to document to incomplete.
I am also looking to use minimum order value concept but no success.
Request to kindly let me know your valuable inputs. Thanks
Regards
Kalyan

Hi
Once I did this using EDI1 and EDI2 functioanlity. I changed that according to my own requirement. You could also use this and change this as per your own requirement but I think yours is very much similar to mine Check this below document.
How to Implement minimum Price check in Sale order and billing.
Thank$

Dump in user exist CC01 to set default value to valid from date

Dear friends,
Task is to set default value to valid from date field in Transaction "CC01".
In INCLUDE ZXCCAU01 of Function 'EXIT_SAPMC29C_001' in Enhancement 'PCCD0001' I written the code like this
DATA var LIKE sy-datum.
var = var + 1.
which is not related to program by creating project and activated the project.
When I run cc01 it is giving dump.
Error is :
Program "SAPLXCCA" tried to use screen 1000.
The screen does not exist.
Can some one guide me What is the problem and How to resolve this.
If not, Is there any other method this can be done.
Regards,
Venkat

Hi venkat,
DATA var LIKE sy-datum.
var = var + 1.
the code u written i guess not ok.The code used by kishan is correct. i.e
DATA var LIKE sy-datum.
sy-datum = sy-datum + 1.
var = sy-datum.
write var.
use the above code.
SAPLXCCA is a functionpool not a program.please check the same.
regards,
Nagaraj

I need to upgrade from Mac OS x 10.6 8 what is the next step?

I need to upgrade from Mac OS x 10.6 8 what is the next step?

Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
             Identifier 5,1 or later.
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
         7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

HT1414 My screen shows a USB cable pointing to the ITunes icon. What is my next step? I can't do anything from there on.

My screen shows a USB cable pointing to the ITunes icon. What is my next step? I can't do anything from there on.

Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How do you remove devices from the device list when setting up 2-step verification for your apple id?

When setting up 2-step verification for my Apple ID, I get a list of devices to verify. My list has my old iPhone 4 and my old iPad, which I don't have either of anymore. Is there a way to remove these devices from the list? Plus, both iPads that are listed don't give any indication of which one is my current iPad and which is my old iPad, so I'm not sure which one to verify. What should I do there.

For reference, I figured out how to identify which iPad was which so I could verify my iPad. I went into the settings on my new iPad and changed the device name, started a iCloud backup (not sure if this was necessary but I wanted to make sure the device name change persited to the cloud) and then was able to see the new name on the device screen for 2-step verification. Hopefully this helps someone if they have a similar problem. I still am not sure how to remove old devices from the list.

I want to export a vcard from contacts but when I do it doesn't give me the next step of saving the file anywhere and if it automatically creates a file, where is it saved?

i want to export a vcard from contacts but when I do it doesn't give me the next step of saving the file anywhere and if it automatically creates a file, where is it saved?

its from icloud contacts. I select all and then go to export to a vcard and then nothing happens.

I recently changed from Windows XP to Windows 7. I am trying to download iTunes to Windows 7 but when I do so, it is only saved. What is next step?

I recently changed from Windows XP to Windows 7 and am trying to download iTunes to Windows 7. When I do that , the download is saved. What is next step?

Run the installer... as with any other installer on Windows, double-click on the file to launch it.

Can I send the zoomed portion of a signal from data view to the next step

I get a zoom window on Data View when I select it. Can I send the zoomed portion to the next step or use it in any way? If I Create VI with this, will the zoomed portion show up in the VI? Will a graph of any kind show up in the VI?

Hi,
Thankyou for posting to the National Instruments Forums.
The feature you are looking for is the Subset and Resample step which may not be the exact thing you are looking for. If indeed this does not fulfil your needs we would love to hear about what features you would like implemented at the Product Suggestion Center.
Hope this helps!
Abhinav T.
Applications Engineering
National Instruments India
LabVIEW Introduction Course - Six Hours
Getting Started with NI-DAQmx
Measurement Fundamentals

Condtion value is set from next step

Similar Messages

Maybe you are looking for