Confiemed qty in Afru table

Hi expert
How to get the cancelled operations in the afru table
since i need to calculate the confirmed qty
Regards

Dear Manoj,
while selecting records from table AFRU in where condition maintain field Stokz and stzhl fileds as follows.
Select filed1 field2
from Afru into table itab
where stokz <> 'X ' and stzhl = ' '.
This will solve your problem.
Feel free to ask if you have any doubts.
Regards,
Vijay

Similar Messages

Wrong picture in AFRU table for scrap...

Hi Experts,
When I confirming co11 and entering scrap, it show wrong picture in AFRU table.
e.g. : For first time i entered 2 scrap.
Seconf time i entered 1 scrap.
But in table it shows 5 scrap.
Which is the right table ? How to finf scrap qty for same prod. order. ?
Yusuf
null

no answer. Closed.

View in afru table

i am using a view in afru table and when i m using rso2 and retriving data it is giving a error smeng refers to a differant table . Will u give some clue to ractify this problem

Since it is a Sap table refered to a differant table i can not change and i need the filed name smeng which is refering to afvv-meinh . In this situation how i will generate view

Mat doc not getting updated in AFRU table

Hi All,
While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are entered at the time of confirmation.
The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
Regards
Ankush

Dear Ankush
please see FAQ note 540392 question 11.
11. Question:
Despite successful goods movements, the material document is not
updated in field AFRU-WABLNR. Where do I find the document number?
Answer:
As of Release 3.1H, the system provides the reference from
confirmation to material document via table AFWI. The system still
only uses AFRU-WABLNR in the case of header confirmations or
confirmations for an individual operation. With milestone
confirmations or with separate goods movements, in other words goods
movements that are posted in the update program or via requests
(BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
always supplied due to technical reasons.
BR Sabine

AFRU table data - taking long time to access

Hi,
In my report i am accessing the afru table, but it takes a lot of time. what should i do ? how can i archive the data from this table ?
Regards,

Hi Khushi,
Your query is simple but quite bad in terms of performance.
Change it to something like:
SELECT [...]
FROM afko
INNER JOIN afvc ON afko~aufpl = afvc~aufpl
INNER JOIN afru ON afvc~rueck = afru~rueck
WHERE afko~aufnr = [...]
For more information you can check OSS note 187906 Performance: Customer developments in PP and PM.

AFRU table when a confirmations at the order level is entered?

Hello,
I know that the users can enter a confirmation in the operation level (with the co11n transaction) or in the order level (with the co15 transaction).
What I want to know is if physically, in the AFRU table, when a user confirm directly an order (co15), do we find lines of confirmation for all the operations with quantities for all the operations (proportional) or just one line with the operation empy (at 0 for exemple) and all the quantity in this line?
Thanks a lot,
Regards,
Julien

Hi,
When you confirm order using CO15 at order level, there will be only one entry in AFRU table for all operations and Operation field in the AFRU table would be blank.Only Order number woule be present.
Regards,
Krishna Mohan

Updation of Custom Fields in AFRU table Using Customerexit

Hi all,
I added two fields in CO11n Tcode using SCREEN EXIT - CONFPP07 and iam trying to update these two fields in AFRU table
using CONFPP05. But iam unable to update these two field .
see this code in CONFPP05
LOOP AT afrud_tab.
    afrud_tab-zzshift = wa_afrud-zzshift1 .
    afrud_tab-zzoperator = wa_afrud-zzoperator1 .
    MODIFY afrud_tab.
ENDLOOP.
Plz help me regarding this..

Thanks for reply
Ya i added two fields in confpp07 .
see the code :
*& Include           ZXCOFTOP
tables : afrud.
DATA : WA_AFRUD TYPE AFRUD,
        IT_AFRUD TYPE TABLE OF AFRUD.
Include           ZXCOFU24
MOVE afrud-zzshift1 TO wa_afrud-zzshift1.
MOVE afrud-zzoperator1 TO wa_afrud-zzoperator1.
Even though it is not updating . except these two fields.
Regards,
Srinivas

Data not coming in AFRU table for 21.05.10 for sometime

Could you please tell me that why does this happen?
For a particular date i.e. for 21.05.10, in the afru table the data was not there, it was saying "No Entries for that date" (in se16). Actually there is a z-report which was not showing the per ton draw calculation for that particular date. But for the other dates, it was showing fine.
Infact, when in the afru table it was showing "No Table Entries found for that particular date", parallely in the z-report it was showing a Default value "341" for all items for 21.05.10.
But just after 10 mins. the data got updated and its showing fine.
What can be the problem? Coz its happenning often, and we the abapers are getting tight scold. But the program is correct. I have checked.
Please Suggest.
Saheli

Saheli,
You need to let us know how you program is designed, if the data is fetched from AFRU table and in AFRU table there were no entries for a posting date, how can you get a value in your custom report?
Please explain what your report does, so that we can i think and suggest as what might be going wrong.
Regards,
Prasobh

Material doc in AFRU table

Hi Guys,
Need a little help, Can any body tell me why sometimes there are enteries in AFRU table with material doc number (WABLNR) and some time material doc number field came as blank. Even though in MSEG i see material doc number (MBLNR) but its blank in AFRU-WABLNR?? Any help be appreciated.

>
samiaalis wrote:
> Hi Guys,
>
> Need a little help, Can any body tell me why sometimes there are enteries in AFRU table with material doc number (WABLNR) and some time material doc number field came as blank. Even though in MSEG i see material doc number (MBLNR) but its blank in AFRU-WABLNR?? Any help be appreciated.
AFRU table is for order confirmation
Material document will create if the material is subjected to goods movement
In case if you use auto GI and GR, then at the time of confirmation, system will post the goods movement
at the time of operation confirmation, if the operation is linked to goods movement( if raw material is assigned to operation or final operation related to GR, that means auto GI or GR, then along with confirmation, material document will create.
In case for particular operation , consider you have n't assign any raw material for the operation , at that time, for that confirmation, No material document is posted, for that confirmation, material document field in AFRU, will be blank

Enquiry in afru table

Dear all,
can any one pls give me the BAPI to update the AFRU table?
Regards,
Pooja

Hi
There is BAPI to change Production order .
BAPI_PP_ORDER_CHANGE
But in AFRU table which fields you have to modify ,try to see.
Also there is two function modules
CO_OCM_BT_AFRU_DATA_GET - Getting the date based on Production order / Process Order
CO_RU_BT_AFRU_SET - Update the table
Please reward if useful.

Poor performance for the 1st select everyday for AFRU table

Hello everyone, I have performance problems with AFRU table. Every day, the first time I run a "Z" transaction, it takes around 100-120 seconds, but the second time and following it only takes four seconds. What could I do, in order to reduce the first execution time?
This is the select:
SELECT * FROM AFRU WHERE MANDT = :A0 AND CATSBELNR = :A1 AND BUDAT = :A2 AND PERNR = :A3 AND STOKZ <> :A4 AND STZHL = :A5
The execution plan for this select takes index AFRU~ZCA with an acceptable cost of 6.319. Index AFRU~ZCA is a nonunique index with these colums: MANDT + CATSBELNR + BUDAT + PERNR
I'll appreciate any ideas.
Thanks in advance,
Santi.

What database system are you using (ASE, Oracle, etc?).
If ASE, for the general issue of the first exection of a query taking longer, the two most likely reasons would be
a) the table's data has aged out of cache so the query has to do a lot of physical i/o to read the data back into cache
or
b) the query plan for the query has aged out of statement cache and needs to be recompiled.
This query looks pretty simple, so the data cache seems much more likely.
To get a better feel, some morning run the query with
set statistics io on
set statistics time on
then run it again and look for differences in the physical vs logical i/o numbers and compile vs execution times.
You could use a scheduled event (Job Scheduler, cron job) to run the query or some query very like it a little earlier in the day to prime the data cache with the table data.

Sum of qty of four tables comapring with other table

I had four tables voy,bl,subbl,dcd, i have to find sum of qty form SUBBL and qty from DCD for all subbl group by CCD
TABLE VOY
INTVCN VCN
10 TEST
TABLE BL
VCN BL
10 200
10 201
TABLE SUBBL
subbl     bl     subbl     ccd     qty
100     200     s1     c1     100
101     200     s2     c1     60
102     200     S3     C2     20
103     201     s1     c1     40
104     201     s2     c1     20
TABLE DCD
crg_seq_no     subbl     qty      weight
     1     100     50
     2     100     25
     3     101     30
     4     101     20
     5     102     20
     6     103     20
     7     103     10
     8     104     20
Following query was executed but we are getting wrong sum for qty (SUBBL)
Query
select d.ccd,sum(d.qty),sum(f.qty) from
(Select distinct a.ccd,a.subbl,a.qty from subbl A, bl B, voy C
Where a.bl = b.bl and b.vcn = c. intvcn and c. vcn = 'TEST') D,subbl E, dcd F
where d.ccd = e.ccd and d.subbl = e.subbl and d.subbl = f.subbl
group by d.ccd
Result
CCD SUM(D.QTY) SUM(F.QTY)
C1 420 175
C2 20 20
Expected result
CCD SUM(D.QTY) SUM(F.QTY)
C1 220 175
C2 20 20

Hi,
This query is OK with you.
But i don't know why you use distinct in first inline view
select d.ccd,sum(d.qty),sum(f.qty) from
(Select distinct a.ccd,a.subbl,a.qty from subbl A, bl B, voy C
Where a.bl = b.bl and b.vcn = c. intvcn and c. vcn = 'TEST') D,
(select subbl,sum(qty) qty from dcd group by subbl) F
where d.subbl = f.subbl
group by d.ccd
Bye
Chitta

Extended Index for an Index in table AFRU

Dear All,
I have found a check box selected in the AFRU table which means Extended Index,
What does it mean.
Please give your input on this one
Appreciating your Inputs
Regards
Ramchander Rao.K

Hi,
fields present in the extended index will have only unique combination entries.
For a unique index, each value combination for the index fields can be
contained at most once in the table. The index fields in this case have
key attribute, that is they already uniquely identify each record of the
table.
The uniqueness of the value combinations for the index fields is checked
automatically by the database system. If there is a violation (for
example in an INSERT operation) an error message (DUPLICATE RECORD) is
given.

Unpredictable behavior u201CFOR ALL ENTRIES INu201D for table AFRU

In AFRU table there are 8 Rows
AUFPL     APLZL     ISMNW     BUDAT                  STZHL
1647     1     95     27.02.2009     0
1647     1     95     27.02.2009     1
1647     1     95     27.02.2009     0
1647     1     95     27.02.2009     3
1647     1     95     27.02.2009     0
1647     1     95     27.02.2009     5
1647     1     95     27.02.2009     0
1647     1     155     12.03.2009     0
Using below Statement I am able to fetch only 5 rows. Select for all entries statement is not picking
Up other 3 rows.
SELECT aufpl aplzl ismnw budat stzhl FROM afru
      INTO TABLE gt_afru
      FOR ALL ENTRIES IN gt_afvc
      WHERE aufpl = gt_afvc-aufpl
       And aplzl = gt_afvc-aplzl.
Five Rows Selected
AUFPL     APLZL     ISMNW     BUDAT                STZHL
1647     1     95     27.02.2009     0
1647     1     95     27.02.2009     1
1647     1     95     27.02.2009     3
1647     1     95     27.02.2009     5
1647     1     155     12.03.2009     0
When I comment u201CFor all Entriesu201D and use statement like below, it s picking up all the 8 rows.
    SELECT aufpl aplzl ismnw budat stzhl FROM afru
         INTO TABLE gt_afru
         WHERE aufpl = '0000001647'
           AND aplzl = '00000001'.
Please Help me understand why it s behaving like this. What is the technicality behind?

SELECT ... FOR ALL ENTRIES IN <itab> or WHERE <cond> ...
If you specify a field of the internal table <itab> as an operand in a condition, you address all lines of the internal table. The comparison is then performed for each line of the internal table. For each line, the system selects the lines from the database table that satisfy the condition. The result set of the SELECT statement is the union of the individual selections for each line of the internal table. Duplicate lines are automatically eliminated from the result set. If <itab> is empty, the addition FOR ALL ENTRIES is disregarded, and all entries are read.
the bold italic part of the above post is the reason for having 5 rows instead of 8 rows.When "For all entries " statement encountered the union selection occurred.And that is why you get only 5 rows.For further help on "For all entries" go through this documentation.[For all Entries|http://help.sap.com/abapdocu/en/ABENWHERE_LOGEXP_ITAB.htm]
Thanking you,
Pulak
Edited by: Pulak Mandal on Mar 16, 2009 3:29 PM

Workcenter in MSEG or some other table

Dear All,
In our industry, we are creating a single production order for one month production of that material. Now at the time of Confirmation we can change the Workcenter as per our requirement and do the confirmation. In AUFM & MSEG tables I am not able to find this Workcenter Field. And my management require report as workcenter-wise.
I can get the data from AFRU Table as workcenter is maintained there. But the main problem in it is we have a process of partial cancellation also. (e.g I have confirmed Material X = 100 NO [some qty. of X material say 40 NO has been issued to some other order. So net remaining qty of X = 60 NO]. But after one or two days we get to know that confirmation of Material X was wrong and actual entry is of only 50 NO. Now we do the partial cancellation through MB31 transaction [102 Mvt.]. Now this partial cancellation is not getting updated in AFRU Table). So I can not pick the data from AFRU Table also.
So the only way (as per my knowledge) is to get the data from MSEG Table but no workcenter is there in this table.
So please suggest a solution.
Regards,
Vishal
+91 9812335975

Dear Vishal,
1) if Your using ECC 6.0, then u can get work center wise confirmation report
2) Go to COOIS, i list input confirmations, then input plant and Execute
3) after executing, just Go to Change Layout & add Work center
4) Now System will show the confirmations Against which work centers carried out
Hope this Helps
Regards
kumar

Confiemed qty in Afru table

Similar Messages

Maybe you are looking for