AFRU table when a confirmations at the order level is entered?

Hello,
I know that the users can enter a confirmation in the operation level (with the co11n transaction) or in the order level (with the co15 transaction).
What I want to know is if physically, in the AFRU table, when a user confirm directly an order (co15), do we find lines of confirmation for all the operations with quantities for all the operations (proportional) or just one line with the operation empy (at 0 for exemple) and all the quantity in this line?
Thanks a lot,
Regards,
Julien

Hi,
When you confirm order using CO15 at order level, there will be only one entry in AFRU table for all operations and Operation field in the AFRU table would be blank.Only Order number woule be present.
Regards,
Krishna Mohan

Similar Messages

  • The query does not reference any table when attempting to build the WHERE clause.  (IES 00022)

    Hi
    I am getting below error.
    The query does not reference any table when attempting to build the WHERE clause.  (IES 00022)
    This error is in Validating Measue object in IDT.
    It is not throwing error for dimensions objects but only for measure objects.
    My BO version is 4.1
    Backend is Teradata 14.1.
    Regards
    Gaurav.

    Hi
    In the dimension/Measure definition, you can select the table. Find the below screenshot.
    If you still getting the issue…Can you please share your screenshot, for better understanding the issue?

  • Free Goods not getting Determined at the Order Level

    Dear All,
    I have activated free goods settings and also maintained free goods master record for exclusive free goods.However when I am entering the main line item the second line item in the sales order which should contain the free qty is not coming,please advice what needs to be done.
    Kind Regards
    Atul

    Hi Jelena,
    Thanks for your post with this I could find out what was happening.The following is the analysis once I switched on the free goods determination at the order level and below was the system response.
    Diagnosis
         There are certain business transactions where it is not possible to
         determine free goods in the SAP standard system: reason 3
         Explanation of reasons
         1      Document category is not from sales order category (VBTYP <> 'C'
         2      Lower-level item
         3      Bill of material
         4      Product selection
         5      Configurable item
         6      Scheduling agreement/forecast delivery schedule
         7      Item with active ingredient management
         8      Item without schedule lines
    I had found that in my item category the structure scope was marked as A where it was exploding the single level bill of material.Once this configuration was turned blank which is no explosion the free goods were getting determined.
    Kind Regards
    Atul

  • TABLE for components issued to the order

    Hello all,
    I have a requirement where I am asked to create a report which picks up all the open orders and and all the Actual quantities of components that have been issued to the order and the currency value for it. Would you know what tables I can use for this report? One table that I found useful is COSP (CO Object: Cost Totals for External Postings). It gives me the dollar value of components issued and quantity but we dont get the material number for those components.
    If you have any suggestion plz let me know.
    Regards

    For actual
    Check AUFM table
    selection criteria movement type 261  -(AUFM- BWART)
    posting date:( AUFM- BUDAT)
    you can find the actual posting quantity  (AUFM-ERFMG)  relevant to production order and value (AUFM-SHKZG)
    for plan
    use RESB table.

  • When i will recive the ordered Recovery disk

    Hi
    I have orderd ( at least ) a recovery cd through website with a prepayment amount, I transferd the cash through my bank since wednsday.
    How do i know if Toshiba recived the cash or not? and how i follow up with my shipment?
    My Order time 1201008930
    Thank you

    Mixat recovery distribution comes not from Toshiba directly and I don't see reason for discussion on Toshiba forum. As you can see on the order page the whole operation is controlled by arvato distribution GmbH.
    Anyway, I dont know where you live but as you know the shipping time is not the same for all European countries. It will come. You will see. ;)

  • TS3274 How can I keep my items on 'Reminders' in the order that I enter them?

    ...they won't stay in the place that I put them.

    You sure shouldn't have to do anything special. And I assume that you mean they don't stay in the order that you type them or arrange them afterward.
    I can't think of any reason why they would be jumping out of order, and really can't think of what to do to correct it, so try something really simple and basic. Close the reminders app and reboot the iPad.
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Drag & drop stops working when I drag outside the top-level window

    I have implemented drag & drop in my application, using the pre-JDK 1.4 approach. It works fine until I drag outside the top-level window, then back in again. My drop target receives a dragExit, but doesn't get a dragEnter when I drag back in. It then gets frequent calls to dragOver - but the DropTargetDragEvent says there are no DataFlavors available.
    Is this a known problem with d&d? Is there a known workaround?
    Thanks
    - rick cameron

    I could really understand that it annoys you. I tried it on my machine and the "save as" dialog box is placed correctly. I couldn't pull the box out of the monitor because the menue bar keeps me under it.
    Do you have the application frame activated? Try turning it off. "window > application frame"
    The problem might be here: The behaviors of the menu bar and dock are adjustable. Go to the system prefs and try playing around with the Mission Control settings. At work I have menu bar and dock on both monitors. At home I set the prefs so that only the main screen has menu bar and dock.
    I'm just guessing. Don't beat me if this doesn't help.

  • Erro:No information was found while confirmation of the order through CO11N

    Dear all,
    Iam getting Below this Error (Product Costing) at the time of Order Confirmation Through transaction code CO11N
    Here specifying the system message
    No information was found
    Message no. GU444
    Diagnosis
    The system could not find the necessary information.
    Pls revert on this  ,What is the reason for this issue
    Regards
    Bhaskar
    Edited by: bhaskaarnn on Mar 23, 2011 1:27 PM

    Dear all,
    I also encounter this problem.Can anybody give me some soloutions for this ?
    Many thanks advance.
    Regards
    Sunny

  • ORDERS05 (CRM) IDOC processing issues when blocking items on the order

    We're successfully loading Sales orders from IDOC type ORDERS05. There are certain checks carried out against a customer contract reference (if supplied) which could require the item in question to be blocked/rejected. I can achieve this okay, but when an item is blocked the Qty against the item is Zeroised, and I notice that the schedule line for the item also has a Zero qty, depsite a schedule line segment appearing on the IDOC with a Qty. If I don't block the item, by removing the checking code, then the qty against the item shows exactly as identified in the schedule (E1EDP05) segment.
    Has anyone else had this problem and if so how did you get around it.
    I've tried duplicating the schedule for the item, thinking that just the first schedule record is zeroised, but it would seem that all scheuled lines are zeroised if the item is block, although that's not what happens if you enter an order manually.
    Regards

    Tx: CRMXIF_C1
    Set Download to Full

  • Third Party Sales Incorrect Status Update at the order level

    Hi,
    We follow a third party sales in our system
    Sales order > PR> PO> MIGO>MIRO>VF03
    Howeevr, the status of the sales order is being processed.
    The quantity is same, item relevance for delivery is unchecked at schedule line and item category.
    Our users want the invoice to be genereated after the MIGO, so at the item category level bliing relevance is G, and at VTFA billing quantity is E.
    It is working if the biling relevance is maintained as f, the status shows completed but i want this for G
    Over all status is being in processed and order related billing at item level is partially invoiced.
    Please help
    Many thanks,
    Shashidhar Reddy

    Hi Santosh,
    Thanks for clearing it out.
    I did not understand what do you mean when u say"MIRO" process, write now our business requires the customer invoice to be created after the MIGO is done for PO, for which we have put billing relevance as G.
    The problem now is, since the relevance is G which is order related billingof deliveyr quantity, even though the invice is completd and the accoounting document is cleared the ordder status still shows "being processed"
    You have already mentioned it very clearly that this can be changed it using the user exit, but i just wanted to confirm that again.
    Sincere thanks for taking time out for this.
    Thank You
    Shashidhar Reddy

  • How can I change the order of thumbnails so it affects the order in the lightbox when using the composition widget - lightbox display?

    Hi, I'm making my portfolio in Muse, and I'm using the composition widget - lightbox display. I imported all the images and then I wanted to reorganize the thumbnails - and when I do that, the order in the lightbox doesn't change and so it's not the same as the order of the thumbnails (after rearranging them). Please let me know if there is a way to fix this quickly, or do I have to do it all one more time

    The order the items display in a composition widget is the front to back order of the items. You can rearrange the stacking order of the thumbnails/triggers using the Layers panel and/or the Object > Bring To Front, Send To Back, etc. menu items to adjust the order they're displayed during auto play or when clicking the next/previous buttons.

  • Send email when a value in the table reached a certain number

    Hello,
    I have a value in a table that when this value is equal or greater than a certain value, I want to send an email to alert. How do I accomplish this? Do I create a trigger? Do I write an o/s korn script and schedule to run continuosly and check for the value to send an email? Thanks.

    Hi, i think that the best form is create a trigger on the table, when insert o update the data send the email when the value accomplish the condition.
    Look the next code, it is a package that send emails,
    CREATE OR REPLACE
    PACKAGE oracle_administrator.dbms_mail_server
    IS
    P_SERVERNAME VARCHAR(50);
    P_RCPT VARCHAR(50);
    P_FROM VARCHAR(50);
    P_TO VARCHAR(50);
    P_SUBJECT VARCHAR(50);
    P_BODY CLOB;
    P_MAIL UTL_SMTP.CONNECTION;
    PROCEDURE INIT_SERVER;
    PROCEDURE SEND_EMAIL;
    PROCEDURE WRITE_DATA(PARAM_DATA IN CLOB);
    END;
    CREATE OR REPLACE
    PACKAGE BODY oracle_administrator.dbms_mail_server
    IS
    PROCEDURE SEND_EMAIL
    AS
    BEGIN
    UTL_SMTP.CLOSE_DATA(P_MAIL);
    UTL_SMTP.QUIT(P_MAIL);
    END;
    PROCEDURE INIT_SERVER
    AS
    BEGIN
    P_MAIL :=UTL_SMTP.OPEN_CONNECTION(P_SERVERNAME);
    UTL_SMTP.HELO(P_MAIL,'hostname');
    UTL_SMTP.MAIL(P_MAIL,'dbaoracle');
    UTL_SMTP.RCPT(P_MAIL,P_RCPT);
    UTL_SMTP.OPEN_DATA(P_MAIL);
    UTL_SMTP.WRITE_DATA(P_MAIL,
    'FROM: ' ||P_FROM || UTL_TCP.CRLF||
    'TO: ' || P_TO || UTL_TCP.CRLF ||
    'SUBJECT: ' ||P_SUBJECT || UTL_TCP.CRLF ||
    'MIME-VERSION: 1.0' ||CHR(13)|| CHR(10)||'CONTENT-TYPE: TEXT/HTML' || CHR(13)||CHR(10));
    END;
    PROCEDURE WRITE_DATA(PARAM_DATA IN CLOB)
    AS
    BEGIN
    UTL_SMTP.WRITE_DATA(P_MAIL,PARAM_DATA);
    END;
    END;
    Luck
    Have a goof day.
    Regards

  • Unable to change the order quantity value during save of sales order

    Hi Experts,
    There is a need to change the order quantity value, based on some conditions, when pressed 'ENTER' or during 'SAVE' of the sales order (VA01, VA02).
    We are trying to change the order quantity value (KWMENG) in table XVBAP in the subroutines userexit_field_modification, userexit_save_document and userexit_save_document_prepare of the user exit 'MV45AFZZ'. But the change is not replicated to field on GUI.
    The order quantity value can be changed in subroutine 'userexit_move_field_to_vbap', but the subroutine is not getting triggered when user changes only the order quantity on screen.
    Please help us in resolving this issue.
    Regards,
    Santosh

    Thanks for your time guys. The issue is resolved.
    SAP is not triggering the vbap user exit as the order quantity on screen is in structure RV45A.
    There are two ways of resolving the issue.
    1. Implement the SAP note #513342 - Quantity change and USEREXIT_MOVE_FIELD_TO_VBAP. But, it is SAP modification note.
    2. Write the code in VBEP exit of MV45AFZZ. This user exit is called whenever the order quantity is changed. But, it is called multiple times in some cases. Hence, need to write code to limit our code execution only once e.g. maintain a global table with our quantity & uom. Check when the quantity and uom in our table is same as quantity on screen. If not, exit from user-exit.
    Edited by: Santosh Kacham on Nov 11, 2011 6:37 AM

  • Access NAST table immediately after creation of sales order (va01)

    Hi All,
    I want to access the nast data for the newly created sales order from va01. I tried to use program exits:
    userexit_save_document and userexit_save_documnr_prepare
    and plu the BADI BADI_SD_V46H0001 method EXIT_SAPLV46H_003.
    the breakpoint is not stoping there even if I have given.
    Please suggest any enhancements are there for such functionality.
    The flow is like this.:
    when user clicks on the save button after entering the data for sales order creation, the email/fax will be send to the contact persons for the output type and I want to update the nast table DATVR entry so that it will be marked as processed entry.
    rgds
    Madhuri

    I am not sure what you want, but I think it is not  the right way to realize the flow.
    When a sales order is saved, the process of issuing output will be handled by another program RSNAST00 (T_CODE: WE15)immediately or via a scheduled job due to output configuration , and the nast table will be updated at the same time. i think there is no need to update the nast table by yourself.

  • Setting the order of a roll over image in a quiz

    Hi,
    I'm using captivate 4 and having issues in setting a quiz for my students.
    I want to have an icon to roll-over so the students can access information relating to the question, eg, diagrams, tables, graphs etc.
    I have done all this yet when the roll over image appears its order is set behind the question and answers, I need it in front. when trying to change the order, eg bring to front, all the options are grayed out and not available. Is there a way to fix this as I know I cannot use a slidelet in a question slide.
    I have also tried to re-order the question and answer text, but is is also grayed out.
    Any help would be greatly appreciated
    Cheers
    Andrew

    Hello,
    You cannot insert interactive objects on any default question slide from pool or not. You will have to change the action to be executed on Success/Failure. There it is possible to jump to a slide.
    Beware: you can never jump to a slide that is outside of the quiz 'scope'. This scope starts with the slide where you have the first scoreable object, which can be a question slide but also a button/click box/TEB with a score. The scope typically ends with the score slide. So be sure that the slide you want to jump to are in that scope. Eventually you can add a scoreable object (with a low score perhaps of 1pt) like a button or click box to the first slide of your project. If you keep the score slide as the last slide you will not have to worry anymore about the scope.
    Hope this makes sense,
    Lilybiri

Maybe you are looking for