Data not coming in AFRU table for 21.05.10 for sometime
Could you please tell me that why does this happen?
For a particular date i.e. for 21.05.10, in the afru table the data was not there, it was saying "No Entries for that date" (in se16). Actually there is a z-report which was not showing the per ton draw calculation for that particular date. But for the other dates, it was showing fine.
Infact, when in the afru table it was showing "No Table Entries found for that particular date", parallely in the z-report it was showing a Default value "341" for all items for 21.05.10.
But just after 10 mins. the data got updated and its showing fine.
What can be the problem? Coz its happenning often, and we the abapers are getting tight scold. But the program is correct. I have checked.
Please Suggest.
Saheli
Saheli,
You need to let us know how you program is designed, if the data is fetched from AFRU table and in AFRU table there were no entries for a posting date, how can you get a value in your custom report?
Please explain what your report does, so that we can i think and suggest as what might be going wrong.
Regards,
Prasobh
Similar Messages
-
Data not coming from DOE to Mobile After defining Rule for device attribute
Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
AbhishekHi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w -
Data not getting into internal table
Hi experts,
I have a query as given below:
IF equipment_number IS NOT INITIAL.
SELECT eqart
equnr
invnr
FROM equi INTO table lt_equi
FOR ALL ENTRIES IN equipment_number
WHERE equnr = equipment_number-equipment_number.
IF lt_equi[] IS NOT INITIAL.
SELECT kunnr name1
FROM kna1
INTO CORRESPONDING FIELDS OF TABLE lt_kna1
FOR ALL ENTRIES IN lt_equi
WHERE kunnr = lt_equi-kunde.
ENDIF.
No data is coming in lt_kna1 table,
I have changed the data declaration of lt_kna1. Earlier it was declared sa TYPE SATNDARD TABLE of kna1,
and I changed it to:
types: begin of ty_kna1,
name1 type kna1-name1,
kunnr type kna1-kunnr,
end of ty_kna1.
data: lt_kna1 TYPE TABLE OF ty_kna1 with header line,
After doing this change, the problem started coming. Earlier the data was coming correct in it_kna1.
How to solve this issue?
Thanks,
Ajay.Hi Ajay,
Your field declaration is not in the sequence of the database table in KNA1. Please correct it & also refer to domain directly instead of referring to field. Just do as below :-
types: begin of ty_kna1,
KUNNR type KUNNR,
NAME1 type NAME1_GP,
end of ty_kna1.
Also check the value of the field KUNDE in lt_equi-kunde . It migh be because of CONVERSION EXIT .
Bohn
As to answer yuor query KUNDE in EQUI is same as KUNNR in KAN1.
Regards
Abhii -
Data not received in PSA Table
hi guyz,
im facing the below issue while loading master data attr from source system to bi system.
im loading data from 0vendor_attr to ovendor object.
only half of the records are processed and gets hanged.
in monitor- administrator workbench its showing (60434 from 157912 records)
below are the details of the issue:
Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
please guide with your expertise.
cheerz,
raps.Hi Rajeev,
Check the job in Background (SM37), you can analyze from here.
Check the short dump in ST22.and check system performance once.
If you are facing this problem first time, cancel the background job and make the request red.
Then repeat the IP again, it will get successful.
This should be due to performance issue or RFC problem of your system.
If the job is active in SM37, cancel the job and make the status IP red.
Re run the IP, it will get successful.
Regards,
Venkatesh
Edited by: Venky1903 on Aug 15, 2011 2:09 AM -
Data not received in PSA Table(urgent)
hello,
While loading Master data full load
which is a load of 457070 on 2days back
where only 4lac records r received to PSA but remaining 57070 was missing
with error<b> Data not received in PSA Table
</b>
when the next day we loaded 5lac records and we got the same error<b> Data not received in PSA Table</b> where except 57070 records remaining all reached PSA
where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
I required ur help to solve this
i will thank by giving points
Regards
PSCHi,
check if there is a TRFC haging in SM58.
can that be that your DB cannot extend its space for this amount of data.
How do you perform the load?
package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
As already mentionned it could also be that an IDOC is haging...
please let us know
Olivier. -
Data not received in PSA Table 0ORGUNIT
Hi,
We have an issue with a text load to 0ORGUNIT with around 35 lakhs of records. This particular load taking lot of time and resulting in short dump with the message 'Data not received in PSA Table'. But when iam making the request red and restarting it manulally it will get succeeed with in 15 minutes. The load is starting at 2:30 UK time and getting failed. I am restarting it at around 9 '0 clock and it got succed . The same thing happening from past 7 days. Can any one tell me what might be the reason and solution for this? Is this temporary memory issue? As the load is to an info object nothing to do with indices.
Thanks in advance
KYou can change the size of the Data Packet.
Open InfoPackge.
From Top Menu choose "Scheduler >> DataS. Default Data Transfer".
Default setting of the Source System will be shown.
Keeping that in mind, try to reduce the "Max Size" & "Number of Data Packages per Request". You might need to try this a couple of times with lesser values each time to ensure that the issue resolves.
Regards
Anujit Ghosh -
Tehnical wage type not coming in RT table
Wage type for Employer Pension Contribution, EDLI Contribution, EDLI Admin Charges & PF Admin Charges not coming in RT table.
Please suggest some solution, Its urgent.
Regards
AbhimanyuHi,
Check in Payroll log where it is not coming up to in IT table..
Check your PF trust configuration eigher Exempted trust or Non exempted trust. based on that system will genearte technical wage types.
And you need to confirm process classes not changed as per SAP standard and done any PCR written for PF and pension. -
SLED date not coming automatically
hi,
As per my client requirement they will enter the production date only in goods receipt and SLED date have to come automatically at GR time. I already maintain the Total shelf life and minimum remaining shelf life in material master.i activated SLED for plant and movement type but SLED date not coming automatically.
If i l enter SLED date more than my Total shelf life period , then system automatically updating the total shelf life period in batch master record. how to avoid this issue? i want whatever shelf life entered in GR should have to recorded not system calculated based on master data(Total-shelf life)
Thanks
Muthuraman.DDear all,
i am using internal batch numbers at the time of goods receipt provide me some solution for above issue?.....
Thanks
Muthuraman.D
Edited by: muthuraman d on Nov 7, 2011 12:18 AM -
Data not received in PSA Table - Data of request already deleted
Hi
I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
And when I click on the PSA table it telling me that Data of request XXXXXX already deleted.
I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
And the short dump analysis just say:
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
I've also tried to repeat the load but with no luck.
Anyone know how to fix this?
Thank you in advanceHi,
Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
Also delete the green request in the Source DSO and repeat it.
Once it loads successfully then load the data to other 3 targets.
Rgds,
Ram -
Data is not coming in internal table
Hello Abapers,
Data is not coming in my internal table.
Plz tell me where I m wrong
SELECTION-SCREEN BEGIN OF BLOCK blk.
PARAMETERS: compcode LIKE vbrk-bukrs OBLIGATORY.
PARAMETERS: billtype LIKE vbrk-fkart OBLIGATORY.
SELECT-OPTIONS: billdate FOR vbrk-fkdat OBLIGATORY.
PARAMETERS : acgrpc LIKE vbrk-ktgrd OBLIGATORY.
PARAMETERS: acgrpm LIKE vbrp-ktgrm OBLIGATORY.
PARAMETERS: taxcode LIKE konv-mwsk1 OBLIGATORY.
SELECT-OPTIONS: plant FOR vbrp-werks .
SELECT-OPTIONS: bussarea FOR vbrp-gsber .
SELECTION-SCREEN END OF BLOCK blk.
START-OF-SELECTION.
SELECT avbeln afkart aknumv afkdat abelnr aktgrd abukrs axblnr
amwsbk bgsber bwerks bktgrm
FROM ( vbrk AS a INNER JOIN vbrp AS b ON
avbeln EQ bvbeln )
INTO CORRESPONDING FIELDS OF TABLE vbrk_vbrp
WHERE ( a~fkart EQ billtype ) AND
( a~fkdat IN billdate ) AND
( a~ktgrd EQ acgrpc ) AND
( a~bukrs EQ compcode ) AND
( b~gsber EQ bussarea ) and
( b~werks EQ plant ) AND
( b~ktgrm EQ acgrpm ) .
RaviHi,
write ur query this way :
SELECT avbeln afkart aknumv afkdat abelnr aktgrd abukrs axblnr amwsbk bgsber bwerks bktgrm
FROM ( vbrk AS a INNER JOIN vbrp AS b ON
avbeln EQ bvbeln )
INTO CORRESPONDING FIELDS OF TABLE vbrk_vbrp
WHERE ( a~fkart EQ billtype ) AND
( a~fkdat IN billdate ) AND
( a~ktgrd EQ acgrpc ) AND
( a~bukrs EQ compcode ) AND
( b~gsber IN bussarea ) and
( b~werks IN plant ) AND
( b~ktgrm EQ acgrpm ) .
even plz check then internal table ' vbrk_vbrp ' if they have all the fields of select query and even the order is same as select , since you are using ' into corresponding fields of table ' clause in select statement.
hope this helps.
thanx,
dhanashri.
Edited by: Dhanashri Pawar on Aug 26, 2008 6:14 AM -
Data is not coming in pivot table
Hi,
i made a request using some measures,month (time) and some other columns but data is not coming when i m working on pivot table though its working in case of table and graph.
please help me out..
thanksHi,
well data is populating in tables and chart in Oracle BI and i also executed the same query in sql server 2005 and got the desired result.
the reason to show the results into pivot table is -- i want to show the result(measures) with time dimension and some other dimensions so i have to use this pivot table or if u have some other solution please let me know...
thanks
Edited by: user629711 on Nov 20, 2008 11:42 PM -
BADI for MIGO update - Data not getting saved in table sometimes
Hi,
This is regarding automatic update of material document number to our Z Table for Gate entry in MM.
Steps for Generating GR throu2019 MIGO:-
1) the user has to key in the gate entry number and plant,
2) then after giving i/p values the user has to click the save button,
3) MIGO number is generated by the system which is updated in gate entry header table.
For updating the MIGO number BADI is used . But some time the system is not updating the GR number in gate entry header table.
Can we use COMMIT WORK statement in BADI? Hope its not advisable to use it.
What else can we do if data is not getting stored in table while updating throu2019 BADI?
Inside the Method : IF_EX_MB_MIGO_BADI~POST_DOCUMENT the below code is written,
Instead Of Updating The Gate Entry Item Table Now
Update The Gate Entry Header Table. Update The
Value Of The Field MBLNR With Current Document Number
Generated Updating the header table ZMM_GATE_ENTRY
SELECT SINGLE *
FROM ZMM_GATE_ENTRY
INTO WA_ZMM_GATE_ENTRY
WHERE GATEENTRYNO EQ GS_EXDATA_HEADER-GATEENTRYNO
AND WERKS EQ GS_EXDATA_HEADER-WERKS
AND GYEAR EQ GS_EXDATA_HEADER-ENTRY_DATE+0(4).
Check To Ensure That Once A Gate Entry Number
Is Associated With A GR It Cannot Be Reused
IF WA_ZMM_GATE_ENTRY-GR_NUMBER IS INITIAL.
WA_ZMM_GATE_ENTRY-REFERENCE = GS_EXDATA_HEADER-REFERENCE.
WA_ZMM_GATE_ENTRY-REFWERKS = GS_EXDATA_HEADER-WERKS.
WA_ZMM_GATE_ENTRY-GR_NUMBER = IS_MKPF-MBLNR.
WA_ZMM_GATE_ENTRY-GR_YEAR = IS_MKPF-MJAHR.
MODIFY ZMM_GATE_ENTRY FROM WA_ZMM_GATE_ENTRY .u201Dupdating the workarea
u201CThe above modify stmt updates data sometimes and does not updates the data sometimes
ELSE.
MESSAGE E901(ZMM) WITH GS_EXDATA_HEADER-GATEENTRYNO WA_ZMM_GATE_ENTRY-GR_NUMBER.
ENDIF.
Plz suggest some soln?
Regards,
P.S.ChitraHi,
This is regarding automatic update of material document number to our Z Table for Gate entry in MM.
Steps for Generating GR throu2019 MIGO:-
1) the user has to key in the gate entry number and plant,
2) then after giving i/p values the user has to click the save button,
3) MIGO number is generated by the system which is updated in gate entry header table.
For updating the MIGO number BADI is used . But some time the system is not updating the GR number in gate entry header table.
Can we use COMMIT WORK statement in BADI? Hope its not advisable to use it.
What else can we do if data is not getting stored in table while updating throu2019 BADI?
Inside the Method : IF_EX_MB_MIGO_BADI~POST_DOCUMENT the below code is written,
MODIFY ZMM_GATE_ENTRY FROM WA_ZMM_GATE_ENTRY .u201Dupdating the workarea
u201CThe above modify stmt in code updates data sometimes and does not updates the data sometimes
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Aug 10, 2010 11:33 AM -
Data not coming in proper tabular format - BICS
Hi friends,
I tried connecting Xcelsius with BW(BEX query) where I succeeded to connect both system and was able to see objects coming through BEX query into Xcelsius connection defination TAB. When I go to its output values, it contains "cross-tab Data". I clicked on it and map it in excel. My BEX query has only two things one is Material (Char) and other is Amount(Key Figure). So I mapped it with two colums of excel of Xelsius and finally mapped those two colums with Spreadsheet component of Xcelsius to view the things precisely as it is coming.
But the problem is when I see the output, though it is showing the data but the header of the spreadsheet is bit scattered.As in,
it should display like:
Material.....|...Amount..|
Mat1..........| 5000........|
Mat2..........| 2000........|
But it is showing something like
Key Figures...|...Amount....|
Material.........................|...........................
Mat1..............................| 5000........|
Mat2..............................| 2000........|
Overall Result...............|..7000.......|
You can see the second table contains data which is really different from the format I am looking for. What could be the reason for this? Anybody can guide me..
Thanks alot!!Hi kgaurav2k1, if you don´t want to see the "Overall Result" you need to change the query definition to not show total (from Bex Query Designer). Regarding the header, I´ve never could change it, and decided to use the data from the 3rd row. It is the format for a cross-tab header.
Hope I help.
Regards,
Liliana -
Data Not coming From DSO to Cube
Hi All,
I have data in DSO. When i run the DTP , request status is green.
Now when i go to cube and see the data the request has came but data has not transferred .....
The Request Status is green in cube but data is not cuming....
No transferred data.
How can bring data in cube..??
Regards,
RohitHi,
When you loaded the DSO......after that are you loading the cube for the first time?If so .....and still data is not coming..then check if the last loaded request somehow got deleted from the DSO....
If after loading the DSO....you have already loaded the cube...and this is the second time you are loading the cube.........then obviously it will pick 0 records...........since delta DTP always picks the fresh new request..........if there is no new request in the source .......then it will pick 0 records.......
Also both the cased are not working.........then check the End routine or Start routine.if any.......
Thanks and Regards,
Debjani....... -
Date not coming in proper format after applying formula in Update Rules
Hi All,
I have two time characteristics "Goods Issue date" and "Goods Return date" and One key figure "No. of days elapsed".
The key figure "number of days elapsed" is being calculated by taking difference of "goods issue date" from "goods return date", but the format for that is not coming proper for example:-
Goods Issue Date is 21.06.2006
Goods Return Date is 22.08.2006
According to formula No. of days elapsed shud be 62
but it is coming as 04.03.0001.
Please help as it is a urgent requirement.
Much Appreciated,
Sunil Morwal.Dear Sunil,
Kindly check if creating 2 new KeyFigures (DATE) will be of help by assigning the said "two time characteristics" values.
From these 2 new KYFs, apply your formula..
Hope this helps..
Thanks.
Message was edited by: Arnold Padiernos
Maybe you are looking for
-
How do I take my credit card off my Apple ID
Hey my name is James, and I went and used a visa gift card to by some music. and now that I went and I have no money left on it, I have no more further use for it. But it won't even let me get free apps, it says I have to fill in my credit card numbe
-
Hi, today I uninstalled Flash Builder 4.0 and installed 4.0.1 Version. After activating FB, I opened and got the following error in the Package Explorer. Could not create the view: Plug-in "com.adobe.flexbuilder.as.editor" was unable to instantiate c
-
Hello, I recently was given a warning that / has only a low amount of space left, although my system less than half full. Here is the current output of df -h: Filesystem Size Used Avail Use% Mounted on udev 10M 276K 9.
-
I synced my phone to i tunes to update software and i also synced a friends phone. As a result of this i lost a number of my contacts and received my friends contacts. is there anyway i can retrive my contacts?
-
Hello Experts, I need to check how many condition records are created for one country for a product i mean by sales org how can i check this, and also i need to check how many of them are manually modified , and how many of them are header and item c