Config for Tax calculation

Hi All,
   I am  SRM functional guy but trying to analyze a issue we are having - Via SRM when we create Shopping Cart and send to backend for PO creation(Classic Scenario), Shopping cart item says 'Error in Transmission' and when I look at RZ20 it says 'For ERS Tax calculation has to be setup'.
Please advise
Thanks a lot.
Rao

Hi,
For the ERS vendor the tax code is mandetory and the tax code which u are entering in SC,Please check in FTXP the tax code settings.
Or if you want to avoide this error, use non ERS vendor in SC.
Regards,
Manish

Similar Messages

  • Base amount for tax calculation in billing document

    Dear Experts,
    Can you help me in this scenario
    when i create a billing document
    Selling Price :74,766.36
    Output Tax: 5233.65
    Final Amount: 80,000.01
    the total should be 80,000 in this case as per customer PO.
    the actual difference is coming from Tax rounding off done by SAP.Initially we added DIFF condition to adjust the Tax amount.
    But it is affecting the Output VAT report, where it shows 0.01 values. business does not want that, so we added DIFF condition to Selling Price.
    Net                 74,766.35  THB
    Tax                  5,233.65
    This is how it post to accounting
    01  8000485 Custome. 80,000.00
    50  2100100 Revenue Gds - Dom 74,766.36-
    50  2623600 Output Tax 5,233.65-
    40  2100100 Revenue Gds - Dom 0.01
    But the base amount for tax calculation is not chaning even after adding DIFF condition.
       Tax amount         Base amnt           Tx   Tax ra
        5,233.65-          74,766.36-           O7    7.000
               Output Tax rate 7%
    Is it possible to change the base amount for tax calculation to include DIFF value?
    Can you please advise? If i maintain Tax condition at header level, does this solve it.
    Regards
    Pradeep

    Hi,
    Please check your condition type settings for Rounding Rule
    may be it is marked as commercial
    mark as B and check it might work

  • How AP behaves for withholding tax when vertax is used for tax calculation

    Hi,
    I am currently working on R12 implementation, I have requirement where business has to calculate the USE tax and withhold it from being paid to the supplier in case if use tax is not mentioned on the Invoice and pay it to tax authorities directly by business. Our client has Vertax third party tax engine. now the question is does it works same as it is in oracle payables in cases if client want to use vertax to calculate tax. How oracle behaves for withholding tax when vertax is used for tax calculations.
    Regards,
    Shashi.

    Hi
    Cheque Go to Menubar of  which document you have to  post for getting the WHT value  Menubar Settings - editing options -  remove the tick calculate tax on net amount.
    Rgds
    Vani

  • New Smart form for Tax calculation

    Dear Consultants,
    I am new for ABAP module, I want to create one smart form, for tax calculation. As per the attachment Most of the fields are standard, only the value I want to pick from Different Infotypes and RT table. please suggest how to create smart form.
    Thanks & Regards,
    Naresh

    Hi,
    create a executable program, pass the all values to Internal table.
    create the structure as same as internal table.(eg: ztable).
    create table type for this structure(eg: ytable)
    T-code: Smartforms.
    click the Form Interface tab, click table . click table
    in that declare the  variable (itab like ytable).
    click the form Painter,
    desgin the output structure.
    Select "Fieldlist on/FF''.
    drag and drop the fields
    Right  click on the main window create a Window -> right click on create window -> click table.ble
    add vertical lines to the table.
    Right click on the mainwindow->flowlogic->loop. enter the itab name.
    activate the smartforms. execute.
    copy the generated number.
    goto to abap editor program.
    Delcare:
    DATA : FM_NAME TYPE RS38L_FNAM.
    CONSTANTS C_FORMNAME TYPE TDSFNAME VALUE 'ZSMARTFORM4'. (smartforms name)
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
                     EXPORTING
                       formname                 = c_formname
    *                 VARIANT                  = ' '
    *                 DIRECT_CALL              = ' '
                    IMPORTING
                      FM_NAME                  = fm_name
    *               EXCEPTIONS
    goto to pattern paste the number and execute.
    comment the number and add fm_name.
    execute.
    Regards,
    Venkat.

  • Query for tax calculation.

    Hi All
    I want to know if it's possible to do calculation using the unit price field in Purchase Order.
    This is what I want to test
    I insert unit price then select the Taxable UDF option (Yes) then the Total(LC) Field ( Standard B1 field must display the amount plus 14% vat and when I select Not taxable it must not apply the 14 % vat.
    The reason why i'm doing this is the client is not a vat vendor ( they dont have to report for tax) so this is just a workaround that i have to expense the whole amount.
    And how to use variables when you want to write a query... like (unit price x 0.14)
    Please any suggestions are welcome.....
    Thanks
    Bongani Dlamini

    Hi Gordon
    "However, the problem start here: how will you use this query result?"
    The calculated amount must appear in the line total field as this field is used for document totaling.
    " Do you want the document total relate to your results?"
    The document total must display the total amount inclusive of VAT , the VAT field must not include any info
    Thanks
    Bongani

  • BPC For TAX calculations

    Does anyone have experience in using SAP BPC to calculate company tax. Considering you already have all consolidation data in BPC already, I assume it would merely be a matter on creating the necessary calculations in BPC to handle the various tax rules.
    I was just wondering if anyone has done this before and what the experience was like.
    How flexible was the tool in change calculations to match the current tax legislation.
    Many Thanks

    Hi Tim,
    Did you ever figure out how to do tax in bpc?
    Its a requirement for my project, and looking for some pointers.
    Thanks.

  • Condition record for tax calculation

    hi .
    how to populate value for condition type MWAS (outputax)
    where to create?

    hi,
    Tax is determined based on,
    1) Departure Country , departure Zone is taken from delivering plant
    2) Destination Country of the customer receiving the goods( i.e Ship to party)
    3) Tax indicators in CMR >Sale area data>billing tab page& MMR>Sales:sale org data1 view.
    Maintain all the above in the condition records for determining the tax condition rate in pricing procedure.
    Reward if it is useful.
    MCM

  • Fumction Module For Tax calculation in PO

    Hi,
    Is there any standard Function Module to find out the tax % and Tax value.
    I have the input parameters ( I can get from the PO).
    or is there any other way that I can get the Tax % and the tax value that is coming in the PO. ( I need to use these two fields in a custom report)
    regards,
    kumar

    Hello Kumar,
    You can use the standard function module CALCULATE_TAX _ITEM.
    Regards
    Mahesh

  • Tax calculation in SRM and passing onto R/3 PO

    Hi,
    We are on SRM_SERVER 550, SP07 and R/3 4.7 backend.
    1. We have a requirement wherein we want the tax determination to happen in SRM. Basically there is no logic for determining the tax codes, but the user himself selects it per line item when creating the cart.
    2. We want this to be transferred to the backend PO line item. The tax codes in SRM and R/3 are identical.
    Can this be achieved by standard configuration?
    I checked that there are 4 choices for tax calculation in SRM
    No tax calculation
    Tax calculation occurs in backend
    Customer specific implementation'
    Tax calc occurs via external system
    tax calc occurs via TTE
    I am not sure which one we should be selecting (currently its no tax calc). I am also not sure if the tax code which is selected in SRM will be passed onto R/3 Or should this be mapped in the BBP_CREATE_BE_PO_NEW Badi?
    The option thro development is to provide a custom field where users can enter the tax code/choose from a list and then map it to the tax code(TAX_CODE - MWSKZ) field in badi BBP_CREATE_BE_PO_NEW. But we would prefer to stick to the standard options if they are feasible.
    Any pointers to this would be very helpful.
    Regards,
    Srivatsan

    Hi,
    If you have a classic scenario where the PO is created in the backend only the standard configurations will work for this.
    1) Determine System for Tax Calculation--- R/3 Tax calculation occurs in backend.
    Tax calculation occurs in the Backend System
    Tax calculation occurs via RFC in the backend system in Financial Accounting. If an external system is connected to the backend system (Vertex or Taxware, for example), this is automatically called from the backend system.
    2) Enter tax code :
    As you mentioned use the same key and also the description here. Make the zero tax as No tax and make it as default also ( which is safer for all users).
    With these two config steps you will get an F4 help in the for all the tax codes defined whereas the system will suggest the zero tax as the default.
    The other config steps are optional where you can have tax codes for you product category. Please do configurations in these steps only if required.
    This SC tax code will be there in the PO created from SRM provided if you have entry for this in FTXP in the R3 system.
    As far as we have configured you dont need BADI for this standard Tax calculations.
    If the invoice is made in R3 with reference to this PO then this tax code can be changed.
    Best regards,
    Sridhar.

  • Tax calculation in Sales order

    Hi,
    I wanted to check how sales tax was calculated on a Sales order for a US customer in CRM. taxware is used for tax calculation.
    I went to item level, conditions tab, selected the condition type, "state tax" and clicked on "accesses" button. The system showed -
    root-> Condition determination -> TracerNo - No Pricing Determination Analysis Available.  After this, if I want more info on the tracerNo what should I do?
    Thanks

    Paul,
          I need to interface Vertex to SAP CRM 5.0. I am implementing E Commerce (B2B / B2C). My R/3 is 4.7 and has Vertex.
    1) Do i have to interface the Vertex with TTE for the tax determination in the web shop? (If yes, how to do this, need config documents)
    2) Do i have to interface Vertex with CRM 5.0 with RFC connectivity?
    (If yes, how to do this, need config documents)
    3) Does Web store depend on R/3 interface of Vertex for tax jurisdiction determination while a B2C consumer registers in the web store (or) does the web store uses TTE interface with Vertex?
    Many thanks in advance.
    With Regards
    Keerthi
    507-401-1030 (Chicago, IL)

  • Income Tax Calculation problem: Urgent Help Needed

    Dear Gurus,
    I am facing a unique problem. Our client has two incentives –
    1) Product Incentive
    2) Sales Incentive
    Every month incentive figures get changed. These two are Monthly Regular Income (Cumulations Class 24) i.e. included in annual tax calculation.
    Now for tax calculation, my client wants "Actual Earning" and "Estimated Earning for the rest of the year" to be different. But Income tax calculation in SAP (for the month of April 2007) takes Actual Earning and multiplied it by 12( i.e. 11+1) to calculate Estimated Earning. But my client wants this Estimated Earning to be different. 
    Now please let me know is this possible in SAP system and how to calculate this?
    Your help will be highly appreciated
    Waiting for an early reply.
    Thanking You,
    With Best Regards,
    Pratik

    Hi,
    I am not understand your problem give your mb then i talk to you
    mhpo

  • How to create dynamic Invoice report based on Tax calculations

    Hi Ppl,
    I have an invoice report requirement. There are multiple line items in invoice and each line item will have a tax % and discount associated with it. Discount has to be applied at line item level. Tax will be applicable on resultant amount which respect to tax share on total amount. Below is example
    Part# Tax     Qty     UnitPrice Amount     Discount     Net Value
    1     12.5%     40     10          400          100          300
    2     12.5%     50     20          1000          200          800
    3     4%     10     30          300          50          250
                             SubTotal                    1350
                             VAT 12.5% on 1100(300+800)     137.50
                             VAT 4% on 250               10
                             Total Amount               1497.5
    I have created a static rtf which does all calculations correctly. I have hardcoded 12.5 and 4 % tax values for calculations. But issue is that taxes are changeable in future so I want to create dynamic template which takes care for tax calculations. I thought of to create an array to store distinct tax values from XML data and then to perform calculation but don’t know how to do that.
    Can some body help me out as this is very critical and urgent?
    Note: Tax calculation can be done at line item level itself but there are some scenarios where additional discounts are there so tax calculation can not be done at line item level.
    Below is the sample XML data
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ListOfBipActionTest>
    - <Action>
    <AccountId>1</AccountId>
    <PartName>17211KCC900LS</PartName>
    <TAX>12.5</TAX>
    <QTY>40</QTY>
    <UNITPRICE>47.06</UNITPRICE>
    <DIS>15.00</DIS>
    <TaxType>CST</TaxType>
    </Action>
    - <Action>
    <AccountId>2</AccountId>
    <PartName>17213KCC900LS</PartName>
    <TAX>12.5</TAX>
    <QTY>50</QTY>
    <UNITPRICE>19.53</UNITPRICE>
    <DIS>8.00</DIS>
    <TaxType>CST</TaxType>
    </Action>
    - <Action>
    <AccountId>3</AccountId>
    <PartName>28302KAG900S</PartName>
    <TAX>12.5</TAX>
    <QTY>50</QTY>
    <UNITPRICE>59.49</UNITPRICE>
    <DIS>15.00</DIS>
    <TaxType>CST</TaxType>
    </Action>
    - <Action>
    <AccountId>4</AccountId>
    <PartName>2830AKAG900S</PartName>
    <TAX>12.5</TAX>
    <QTY>10</QTY>
    <UNITPRICE>168.7</UNITPRICE>
    <DIS>15.00</DIS>
    <TaxType>CST</TaxType>
    </Action>
    - <Action>
    <AccountId>4</AccountId>
    <PartName>91001GF6000S</PartName>
    <TAX>4.00</TAX>
    <QTY>60</QTY>
    <UNITPRICE>115.34</UNITPRICE>
    <DIS>17.00</DIS>
    <TaxType>CST</TaxType>
    </Action>
    </ListOfBipActionTest>
    Thanks
    Ashish

    Dear Efstratios Kara,
    I installed SAP Integration Kit 3.1. Yes I installed the integration kit after installing CR.
    I have uninstalled the earlier version and i have reinstalled CR with (12.3.0.601) version.
    But still i cant view the SAP connectivity. can u tell me from which version they have included this connectivity option in CR.
    If CR going to support SAP Table connectivity on specific version, what is that version.
    Waiting for your reply.
    Regards,
    Suman

  • Tax calculation in backend and in SRM (classic and standalone scenario)

    Hello,
    I have an issue regarding calculation of tax. 2 scenarios are used in common: classic and standalone. One node of Organizational structure is using classic scenario, another node is using standalone. So I have 2 Accounting Systems defined (one for each node).
    Requirement is:
    - For classic scenario, setting the tax calculation in backend
    - For standalone scenario, setting the tax calculation to no tax calculation
    Problem is that I can not customize the system this way. I do not know any mean to set 2 ways for tax calculation. Would you have any idea to do this?
    Thanks,
    Patrick

    Hi
    <b>Please go through this -></b>
    http://help.sap.com/saphelp_srm50/helpdata/en/f4/8b1d40bb37e569e10000000a155106/frameset.htm
    Note 848164 SUS3.0: FAQ: Logic of Tax calculation within SUS
    958273 FAQ: Taxes in SRM-SUS
    999896 EBP tax codes not correctly mapped to back-end tax codes.
    908659 Follow-up note for Note 509594
    931198 Missing Tax Code in Limit Shopping Cart
    430202 Delivery address in shopping cart in BAPIEKPOC
    931198 Missing Tax Code in Limit Shopping Cart
    881086 Country-specific tax calculation
    703292 TAX. Input/Output tax in SAP Supplier Self-Services with TTE
    513250 ERS. Tax calculation with the new 3.0 function 
    390861 Transferring tax table for ERS from backend system
    Note 657146 Enhancement for US tax calulation: Functions
    510142 EDI-Customizing: Tax code tax-exempted transactions
    317040 MR08: Message M8267
    49436 MR44: No message if the tax amount is different
    Note 84127 Tax Jurisdiction Code for EDI/ALE and Intercompany
    Also Try BBP_DET_TAX_BADI.
    Regards
    - Atul

  • Tax Calculation in PO

    hi all,
         Can you send the code for Tax Calculation for Purchase Order or  Can you tell the procedure for Tax Calculation in PO.
    Thanx & Regards
    Rami Reddy

    Hi,
    You will get all the condition types in PO in KONV table , and all the tax details like VAT , BED, CST etc you will get from A363 table , you can access the values from A363 table by passing plant , vendor , date.
    Regards,
    Bharat

  • Tax Calculation in MM and SD

    HI
    I am little bit confused in Tax Calculation in MM and SD . Please see the scenario below
    In my current project in MM side we maintain Base price , discounts and other MM related conditions using MEK1 and for Tax related conditions we use FV11
    So we use Pricing Procedure and Tax Procedure
    But in SD side , Pricing ,discounts and also taxes related conditions are maintained in VK11 , SD uses all custom conditions for Tax
    So my questions are as follows
    1- In standard  SD - do SAP have Pricing Procedure and Tax Procedure or both can be used within one procedure ?
    2- So in MM can we use tax conditions ( Custom tax conditions) in MM calculation schema and determine the taxes ?
    3- In MM if we use calculation scheme and tax procedure , then how tax base is determined for tax calculation ?
    Thanks and regards
    Bhushan

    Hi,
    In mm we use Pricing Procedure and Tax procedure both.
    2- So in MM can we use tax conditions ( Custom tax conditions) in MM calculation schema and determine the taxes ?
    Normally you use MM Pricing Procedure for Base price, discount, freight, packaging etc.  However for import scenario custom tax conditions like Basic Custom Duty, CVD, Cess, Sec cess is added in MM pricing procedure.
    The Tax procedure could be used for excise duties , CST, VAT, service tax.
    3- In MM if we use calculation scheme and tax procedure , then how tax base is determined for tax calculation ?
    If you check your tax procedure say taxinn you have condition type BASB and  routine for base value as 362 through which it calculates base value
    Where as in Sd you could use it in one.
    Thanks and regards

Maybe you are looking for