Config of sales org

Dear All,
I have completed the settings in PPOMA_CRM for the new sales Organization.
But i am facing with two more problems.
1) While creating Customer master record in CRM then the system is not showing the sales organization which i have did settings in PPOMA_CRM
2) I have replicated the material from ECC to CRM. But the system is not showing the sales organization under SALES AND DISTRIBUTION tab.
Whether i have to execute any program...?
Please suggests me..
Edited by: shafi ahmed on Dec 22, 2009 6:01 AM
Edited by: shafi ahmed on Dec 22, 2009 6:06 AM

Hi Ahmed,
Whenever you make any change to org model  you have to run the report  HRBCI_ATTRIBUTES_BUFFER_UPDATE
This will ensure that the data is accurate and upto date in all tables, function modules and transactions.
organizational management is time-dependent.
In General a schedule back ground job is recommend each night .So program every morning (after 0:00 hrs) before starting your systems.
You can run this report through SE38 transaction.Tyeo HRBCI_ATTRIBUTES* and F4 you will get it.
Regards,
Satish Mathala

Similar Messages

  • How to assign a Sales Org and Product group

    all the config have been maintained (creating the hierarchies/categories, assign the set types to categories etc.) under IMG->Cross-Application Components->SAP Product.
    Also assigned the set type for sales data/product group for category MAT_DIEN.
    But the fields from these section are greyed out when I try creating a product (not able to assign the sales org, or product group)
    Edited by: Agarwal Ameet on Aug 9, 2010 9:56 AM

    Dear Sun,
    One way is:
    Maintain the required setting in T. Code: VKOA.
    Another way is:
    Create an Internal Order (T. Code: KO01) with required Field-entries in
    Tab: Assignment --> Profit Center; and
    Tab: Period-end Closing --> Cost Center ( or G/L account).
    and attach it to your Sales Order.
    To know more about Internal Order Processing, refer:
    [Internal Order|http://help.sap.com/saphelp_erp2005vp/helpdata/en/a9/ab7f68414111d182b10000e829fbfe/frameset.htm]
    Or, consult FI-Personnel at your end.
    Best Regards,
    Amit
    Note: Also, sharing one document for knowledge-sake:
    [Acct assignmt logic sales order proc.|http://www.saptechies.com/acct-assignmt-logic-sales-order-proc-rem/]

  • Sales Org Creation with incorrect Statistics Currency

    We created a new sales org with the incorrect statistics currency.  When realized this BEFORE we created any documents in that sales org.  We changed the statistics currency in config and now we get an error when entering a sales order on that Sales Org.  The error is Error while determ. loc. crcy: exchange rate type XXX date 07/31/2014 from TWD to CNY.
    We do not want to maintain a currency exchange rate in OB08 for this combination as it is not relevant for our business.
    Is there any way we can get past this error without maintaining that currency exchange rate?

    Issue has been resolved.
    Configuration was pulling in the incorrect credit control area from the copy.

  • Account Group of Customer representing Ordering Sales Org. in Intercmp Bill

    Hello everyone
    As a standard process, we are implementing Intercompany Billing cycle.
    1) Sales Org 1 orders goods which are shipped by plant of a different company code.
    2) Thus in the end when Delivering Plant raises an Intercompany Invoice to the Sales Org1, the Payer on the Invoice is the Customer Number tied to the Sales Org1 in IMG config.
    Now my questions is regarding the account group of that customer.
    Should that customer be of account group = 0001 (Sold to party) ...or something else ?
    Also can customer of account group ICBF be used ?
    Please share your thoughts.
    Thanks
    Vin

    Hi Vinit
    Customer account group = 0001 (Sold to party) only we have to extend the inter company customer to ordering company sales area and we have to assign this inter company customer to ordering sales organization
    I hope itu2019s helpful to you.
    Regards,
    Krishna

  • Extending material master for different sales org/plant combination

    hi ,
    1 ) a material can be sold from one plant by many sales organisations. so we map this scenario in enterprise structure by the config step "assign sales org--dist channel--
    plant ". (let's say sales org A and B  selling from plant 1 and also sales org A selling from plant 2)
    when we have defined the above config step, then why we need to have material master extended for different combination of sales org and plant as in stpe 1 ?. we can just create one material master with one plant and sales org combination and based on config as in step one, we can sell material from any sales org from a plant  ?
    2) we can extend  material master for any combination of sales org/plant .....is it also possible to extend material master to different storage locations !
    regds
    pamela
    Edited by: Pamela79 on Feb 15, 2011 11:02 AM

    There are several reasons why you should extend the materails to different sales organizations and plants.
    a. The materials are normally valuated at the plant level. So, you can have different valuations at different plants.
    b. You can have different quantity stored in different plants. How do you know which plant has what quantity.
    c. You can have materail not to be sold from one plant, but you can have the same materail sold from the other, how do you block it? at the plant and materail combination, you can do it.
    d. For different sales organizations, you may want the cost and the price to be posted to different GL accounts. You can control it at sales org level of the materail.
    e. You may just want the material to be purchased but not sold, then you may not even create a sales org view for the material. But say, in future you will like to only purchase a materail from a plant and consume it for some other purpose but not sales (which u did previously), then you can block it at sales org and dbr level.
    So, these are a few reasons. But there could be many. You can have a look at the fields in the material master at sales org level and plant level and you can find it for yourself howmany parameters are there to control...
    Hope this helps...
    Regards,
    Mukund S

  • Two sales org in One company code

    Hi all,
    I know u can assign two or more sales org to one company code.
    But if i have one common customer i.e one Customer No for both the Sales org's  how do I differentiate which open items belong to which sales org when running my open item report in FI. The Sales org data is not transfered to the FI Posting. Is a user Exit and diff numer ranges in SD the only possibility? is there no sap Standard for this.
    Thanks
    dave

    HI,
    Are Business areas/Division of this customer same?
    Reference number and allocation numbers are transferred to accounting documents.In customizing for copy control in billing,you can define which numbers will be copied as reference or allocation numbers.
    Like - Sales order number,delivery number and Billing documents etc...
    From sales order number you can know sales organization.
    The reference number is in the header of the accounting document and is used for clearing.
    The allocation number is in the customer line item and is used for sorting line numbers.
    Vrajesh

  • FBL5N Cleared items not having the Sales org

    Hi Guys,
    In FBL5n open items having the Sales org (XREF1), when we are clearing the Documents, Sales org (XREF1) not coming to the cleared items.
    Is any user exit or BADI to populate the value to Cleared items also?
    Thanks
    Gourisankar.

    Hi
    Cleared and open items should be the same, i.e open item are cleared item before clearing it.
    So I suppose u mean the items of clearing document?
    If it's so u should check your FI customizing because it should be a clearing rule, so perhaps it shlould be better to ask it to your FI consultant
    Max

  • Mass change - Move existing sales orders from Sales org A to Sales org B

    Good morning dear network,
    am seeking for your guidance on one specific matter.
    We are in the process of making changes to our billing / organisational structure (new sales orgs)
    One of the challenges is that we need to move existing open sales orders from one sales org to another (new) sales org.
    If all master records exist in the new sales org, is there a (technical) way of moving the existing sales orders from the current sales org into the new sales org, without having to replace each order individually ?
    would welcome any suggestions.
    Many thanks

    I would recommend to close the existing open sale orders by assigning Reason for Rejection and create new sale orders in the newly created sales organisation.
    This is due to the fact that you need to ensure each and field in the existing sale orders to match with the newly created sales organisation and it is bit time consuming.
    Still if you prefer to what you had indicated, LSMW is the better option
    thanks
    G. Lakshmipathi

  • How to extend Sales org for a material being Changed

    Hi Experts,
    i need to extend sales org , distribution Channel for a material .
    my table look like this and having 6 fields shown below
      1             2         3               4            5                     6
    Sales org | Des | Distn Chnl | desc |  Copy from So | Copy from Dstn Chnl
    If the user enters the existing value in Copy From SO and Copy Fron Distn Chnl  .  Then i need to copy all the values corresponding to the Existing SO and Distrn Chnl to the Newly entered Sales Org . 
    the table im displaying in ALV , if user perss F4 in copy From SO and Copy From Distn  , i need to show the existing values for the material being changed , this is working fine and i am able to get the existing values.
    After user selects one of the existing value for SO and Distrn channel  , i need to copy all the values to newly created So and distrn Chnl  .
    i dont know how to proceed . Please help me to solve this problem.
    Thanks,
    Shrikanth

    You can use AET to extend the sales area data of BP.  However, it wont add the fields automatically in GUI, But the generated fields are available in the relevant DB tables.
    BP GUI transaction is no more supported . Im not sure why you want to work on GUI.
    Regards,
    Shaik

  • Error : Sales Org.Unit does not have these attributes -- Urgent

    Hi, Team,
    I am unable to create a service order with serivce material ( Only installation visit charges ) for w/o warranty product .
    I am getting error : " Sales Org.Unit does not have these attributes "
    I had checked the related Org data of respective sales org , already the sales area combination is also maintained from R/3 with required attributes "
    Pls revert with possible solution .
    Regards,
    VCS

    PePe :
    Thanks for reversion !!
    Basically it is a product Service Material (Servicing Charges), where in I had checked in the transaction ,   Though the required sales area  is well maintained in the R/3 System and is being replicated to the CRM . 
    When I checked the product Service material , the required comination is missing and could find other sales area combinations .
    Pls guide , how to go to get this resolved .
    Regards,
    VCS

  • Free Goods determination -acess sequence sales org/ plant/material

    Hi
    I am trying to determine the free goods by choosing the key combination as Sales org/plant/material.
    The system is not determineing the free qty ,instead when i maintain the condition record with customer/Material key combination ,then the system is determineing the free qty.
    I also tried to put acess Sequence Sales org/plant/material above the Acess sequence customer/Material,but still the system not detrmineing the free qty in the order.
    can any one pl gide me how to solve this issue.
    regards
    shashi

    Hi
    Go to the access sequence where Sales org/Plant/Material are maintained as condition table.
    Now select the condition table and then click the node "Fields" on the left hand side of the screen.
    It may give a warning message that "Fields are not yet generated". Just ignore this and Enter once again.
    Do this until it takes you to a screen where you can see fields like KOMK-VKORG, KOMK-WERKS and KOMP-MATNR
    Now create the condition records and check in transaction by creating sales order. It shoudl work.
    Hope this helps.
    You can reward if it helps you

  • Free Goods Determination Based on Access Seq -Sales Org/DistCh/Cust/Materia

    Dear All ,
    Based on the requirement , I have configured 2 access seq for free goods determination.
    1. Customer/Material
    2. Sales org/DistCh/Customer / Material .
    The free goods determination is working fine when i use the first access Seq - . Customer/Material  and when i use the 2nd access seq - Sales org/DistCh/Customer / Material  free goods determination is not happening for both inclusive and exclusive .
    Can any one help me on this issue , as i am not able to identify  the issue .
    Thanks in advance for all the help.
    Regards
    Veera

    Hi
    Ceck this thread
    Forum post in ERP SD Sales: New Access Sequence for Free Goods Determination
    New Access Sequence for Free Goods Determination
    But for you free goods determination should be happening at
    Sales org/DistCh/Customer / Material  without any problem
    Make sure Sales org/DistCh/ maintained in VBN1 and what is falling in sales order are same
    Regards
    Raja

  • ABAB programm to copy material sales text from one sales org to another?

    Hi all,
    i'm searching for a ABAP programm to copy a material sales text from one sales org to another.
    Has anybody seen something like that before or has anybody an idea how to do this?
    Greetings & TIA
    strobbel

    @Narin
    I've tried to execute both code now over a new programm in the se38 and i get a error message from the first code (http://www.sap-img.com/abap/bapi-to-copy-materials-from-one-plant-to-another.htm).
    It's called:
    "BAPI_MARC1" cannot be converted to a character-type field.
    Could you help me to solve this?
    Sorry but i'm an absolutely newbie in things like ABAP and so on ...

  • Changing proposed delivery date in sales order for one specific sales org

    Hi All,
    I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
    For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
    Thanks in advanced.
    Points will be awarded.
    Regards,

    EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
    USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

  • Sales org 2 view in material master

    hi gurus,
    Iam not able to see all fields in sales org 2 view in material master and i would like to know how to configure to restrict end users not to change it . thank you in advance.
    regards,
    Gopio

    Hi naga gopathi
    go to Spro->logistics general ->materials management->  there you select the options of material feilds and select the material type and click on till you reach the sales orgn 2  view , .
    In MMR settigs you can see table  wise so i think it should me MARA table. for sales orgn 2 view
    There you check the feilds wat you want is in display or supress mode 
    Regards
    Srinath

Maybe you are looking for