Config to display web browser query result ?

Hi all,
I'm a newbie on BW, I'd like to know how can I get my query executed in the I.E. browser ?
I use the "query designer" and after saving the query when I execute it using "display query on the Web" button, the browser appears with a blank page ( the default page of I.E. )
If someone could help me ?? ( I am on BW 3.5 )
Thanks.
Regards,
Erwan.
Message was edited by: Erwan LE BRUN

Hi Erwan,
You would first need to check if the correct web settings are maintained. The following document can help you with this:
https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to enable sap bw web functionality.pdf

Similar Messages

Is it possible to export the graphical display of a Query Result to .xls ?

Hi Guru's
Is it possible to export the graphical display of a Query Result to .xls ?
Please give me some assistance
Points will be assigned
Thanks and Regards
Srikanth

Hi Srikanth,
Checked it....I am able to save that as a .XLS in the above mentioned process.
Try it again.
Regards,
Ram.

Help with WAP 1142n not displaying web browser?

Hi all
Sorry I am new with the Cisco WAP.
I have my device configured, and it has an IP, subnet, etc.
I currently have it connected with serial port to my laptop and used PutTy to get into it, that's no problem.
However, despite it having an IP, I cannot use the web browser with it! This is driving me mad. I want to use the web browser and not the CLI for everything. Let me know if you need screenshots. Everything looks ok to me....it has a BVI1 IP as well as an Ethernet address.
thanks in advance!

You currently have configured...
no ip http server
ip http secure-server
Are you sure you are navigating to "https://" ?

Text variable is not displaying in the query result

Hi All
I am having problem here i have cteated a text variable on 0company with replacement, its not showing the name or key on the output when i run the qury it showing &ztxtvatc& so what might be the problem........pls can anybody tell me the solution for this and iam working on BI7.0, New version.
Thanks in advance
Srinivas

Hello ,
          You can try this code, sorry if i am wrong,
DATA: l_value(10)   TYPE c,
      l_s_comp     LIKE /BI0/TCOMPANY,
      l_t_comp     LIKE /BI0/TCOMPANY OCCURS 0.
WHEN 'ZTXTCOMP'
IF i_step = 2.
LOOP AT i_t_var_range INTO loc_var_range
           WHERE vnam = ZCOMPANY'.
SELECT * FROM /BI0/TCOMPANY
                 INTO l_t_comp
             WHERE /BI0/OICOMPANY = i_vnam.
LOOP AT l_t_comp INTO l_s_comp
        CLEAR l_s_range.
        l_s_range-low = l_s_comp-RSTXTMD.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE
END LOOP.
EXIT.
END LOOP.
END IF.
hope it helps,
assign points if useful

Error of query launch in web Browser

I test a standard query 0FIGL_VC1_Q0002, It's run well in BEx(Excel)
But in BEx->Analyzer (SAP BW 3.x)->Tools->Launch in web Browser->Query(Default view)
I got an error page below.
http://sapecc6:8000/&sap-client=800sap/bw/bex?sap-language=EN&CMD=LDOC&infocube=0FIGL_VC1&query=0FIGL_VC1_Q0002
Service cannot be reached
What has happened?
URL http://sapecc6:8000/_sap-client=800sap/bw/bex call was terminated because the corresponding service is not available.
Note
The termination occurred in system ECC with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:1-i:sapecc6_ECC_00-v:0-s:404-r:Notfound
I feel the link address is not make sense. So I modified it
http://sapecc6:8000/sap/bw/bex?sap-client=800&sap-language=EN&CMD=LDOC&infocube=0FIGL_VC1&query=0FIGL_VC1_Q0002
After enter the modified link address in IE I can browse web report well.
Hope someone give me some help. Thanks.
ps:TCODE:SICF
default_host->SAP->bw->Test Service is OK
and the login address is http://sapecc6:8000/sap/bw/bex?sap-client=800
Edited by: nono.lee on Feb 27, 2011 9:29 AM

i Guess its something to do with your browser setting on your PC

Require print pushbutton on a query result displayed in a web browser

Hii,
I have a created a query in SAP Bw 3.5. and it is available under queries column in my sap easy access screen.when i double click or execute that query , the result of the query is displayed on web browser.There i am getting push buttons for follwing like.save view, bookmark, variable screen , exceptions&conditions , export to csv and export to excel.
Similarly i need a push button for print so that when i click on print , it has to print the report.
How to create push button . how to place that pushbutton in the default template that is used for display

Diwakar -
This is probably not the most appropriate forum for you question. This forum is geared towards EP migration issues and questions.
Thanks,
Kyle

Web-browser only display Summary Status and no menu for configing

Guys,
I have 4 Cisco Aironet 1140. I open a web browser IE 8 and type their address "http://<ip address>". Then I enter my username and password in the browser and successfully login to the access point.
But, There is something strange, why I only see Summary status of my access point after the login process success??? I can't config anything...
I add a new username and use highest privilage, but the result still the same. Same unusual web display, only displaying summary status of the access point, I can't config ssid, vlan, etc.
Here's my configuration:
username Zicco privilege 15 password 7 123A551A02055F106B
username Bl4st privilege 15 secret 5 $1$UJom$UoNBR07HmSGXdoxTUR1W40
ip http server
ip http authentication local
no ip http secure-server
Is there any configuration command that must be added? Please help me.
Thank you

Hi George, today we solved the problem. With adding this command: "config(terminal)#ip http authentication local" all of 5 access points now able to managed via web browser.
Sometimes, we can use access point's web browser without adding this command. But in my cases, only using command of"ip http server" isn't enough. You must add "ip http authentication local" command to your configuration. I dont know why.
And we must have at least one: username <username> privil 15 pass <password> that is full privileged user to use as username and password logon in your access point browser. Otherwise we can't logon to our access point.
Thank you George, I appreciate your kindness. Regards

Character in chart of bw query display error in web browser

our system is unicode system,default language is chiniese(ZH)
our IGS patch level is 11
system basis release is 700 patch 13,and BW patch level is 15
everything is ok
but when we execute the query in WEB browser,the chart display error like the image below:
[http://www.xhschool.com:82/yuuki/viva/zh.jpg|http://www.xhschool.com:82/yuuki/viva/zh.jpg]
the text of kpi in the chart display error as the squares.
how can i make it correct?

Hi,
you have to download and install igshelper.sar as described in note 1028690.
Regards, Kai

QA: Designer's operation to Add one more Field to display in Query Result Web Part

QUESTION ABOUT Query Result Web Part presentation +1 Field
I'd be looking at a property of Web Part to look up Discussion Board through Query Result Web Part. Currently it displays 'Title' column of Discussion Board, and my caring requirement is presentation customization to hold double
columns of 'Title'+'Updated Date'. How could I add one more field 'Updated Date' to display in addition to that preexisting 'Title' field?
Any procedural steps to realize how to add Filed to display in Query Result Web Part?

Hi Yoshihiro,
As I understand, you want to add the field to display in Query Result Web Part in SharePoint 2013.
Which web part does you use? Content query web part or search results web part?
If you use search results web part, you could edit the discussion board result template and add the updated field in the template.
You could go to Design Manager: Edit Display Templates (site setting-> look and feel->design manager->edit display template), download the Discussion Item.htm file, and edit the file.
After editing, upload the file.
The articles below are about how to modify an existing Display Template in SharePoint 2013.
http://www.learningsharepoint.com/2012/09/17/sharepoint-2013-the-new-display-templates-for-styling-your-content/
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/01/sharepoint-2013-customize-display-template-for-content-by-search-web-part-cswp-part-1.aspx
If you use content query web part, you could edit the content query web part, in the Property Mappings section select the “Change the mapping of managed”, and add the “modifiedOWSDATE” (it means the last modified date) in the line, after
that you could see the update date under the title.
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Fast display of ResultSet to web browser

I am working on refactoring my companies search engine, and a critical component of the search is that the results be displayed very quickly. We have done enourmous work on making the queries fast (under 1 second), but the bottleneck always seems to be how we process the results into HTML and send them to the users web browser.
Running Tomcat, we currently use a JSP page to pass the search parameters to a Java class that queries the database and generates HTML based on the ResultSet object. The method we use to generate the HTML is very low tech, we simply generate a String that contains HTML along with the data from the ResultSet and print the String out to the users web browser via the PrintWriter object obtained from the session.
I would like to solicit ideas as to how this process can be improved. What's the absolute fastest way to get ResultSet data transformed into HTML and displayed in the users browser? I'm exploring maybe using the XML, but I haven't found much information about the speed of that technology. One caveat is that the data has to be processed before display,in the sense that if certain flags are set in a row of the ResultSet, that row data should be displayed accordingly.
We currently do something like this many times:
String html = "<table>";
if(resultSet.getInt(3) == SOME_FLAG) {
html += "<tr><td><font color='red'>resultSet.getString(6)</font></td></tr>";
html += "</table>";It would be nice if the suggestions would fit into our current Oracle/Solaris/Tomcat/JSP/Servlet architecture, but not a requirement.
Thank you very much!
P.S. Sorry if this isn't the right category for this. I labored long and hard deciding which category to post this question under, and this one seemed to be the best fit.

Check out the FormattedDataSet. It does things similar to what your code does, but is much more flexible AND monitored for performance in with JAMon. Out of the box it can create html tables, list boxes, drop downs, multi selects and html. As a developer you can generate dynamic text to appear any way you dream up.
Here is some sample code
FormattedDataSet fds=FormattedDataSet.createInstance();
// same query vary the formatting. note other types of tabular data are also accepted
String html=fds.getFormattedDataSet("select * from table", "htmlTable");
String xml=fds.getFormattedDataSet("select * from table", "xml");
String csv=fds.getFormattedDataSet("select * from table", "csv");Check out a live demo at http://www.fdsapi.com. Within the next week I hope to have a live demo that allows you to type in queries. You can already download a demo war that has this capability.
steve - http://www.fdsapi.com - the easiest way to generate dynamic content.

When displaying images in web browser, next images appears on page where I left last doc

Hello, I am in need of some help here.
I have an application that displays PDF images using Adobe Reader X v 10.1.4 through a web browser. What is happening is I view a document and scroll down to say page 2.
When I leave that document and go the next one, that document opens on page 2.
Is there anything I can do in the setting of Adobe or the way that I am making my call to show the image through the web browser to display the next image at the top of the page, rather than displaying it where I left off on the last document?
I have tried unchecking the option for Restore last view settings when reopening a document and also open cross-document links in the same window. Both of these had no effect on the issue I am encountering.
Any help would be greatly appreciated.
Thanks!
Scott

I am not sure how to fix the problem using the FGL framework, but here is a way to get the right result
In the CSS file under the @media only screen and (min-width: 769px) section, modify the following style rules
#menu {
    clear: both;
    float: left;
    margin-left: 0;
    width: 20%;
    display: block;
    vertical-align:top;
#content {
    clear: none;
    float: right;
    margin-right: 0%;
    width: 80%;
    display: block;
Having said that, you will do well to scrap FGL and have a look at Bootstrap

Display PDF in Web Browser Setting

Good Morning,
We recently encountered some issues with Adobe 9.0.0 on Citrix servers. We updated to Version 9.3.4, since we had not fully tested Reader X yet.
The issue is that we have an application that calls to Adobe and opens PDF files within the application. When I log on to the citrix server locally, the setting Display in PDF Browser is selected. My account is an admin of our domain. When I log in to the server with a standard account, the setting is not selected.
I found the bBrowsing Integration key in HKCU\Software\Adobe\Acrobate Reader\9.0\Originals and when I am logged in with admin account it is set to 1, when I login with the non-admin account it is set to 0.
The same key also appears in HKEY_Users\.Default\Software\Adobe\Acrobat Reader\9.0\Originals. My question is this, can I set this globally on my Citrix servers so that the Display PDF is Browser is selected. when users login to Citrix Presentation Server, launch the applications that call to Adobe, that the pdf open in a web browsers of the applications. Currently, if you hit the link the PDF file will open in its own window.
Sorry if this is a bit wordy, but I figure it is best to give too much info as opposed to not enough.
Thank You
Brian Dougherty

Yes the pdf is opening in adobe. But I don't want to open a new adobe browser to open.
I want to display in the current web browser where my application is running.
eg. if u are embedding pdf file like this.
<EMBED src="temp1.pdf" width ="750" height="550"></EMBED>
It won't open the new window. It displays the result in the current window.
I have my pdf content in byte array. To wirte the above code i need a file. I even writes the byte array to a temporary pdf file. But I can't able to import that file dynamically to the WSAD workspace.
Is there any other way to embed the (byte array)pdf file in the current window.
Please advice me.
Thanks in advance.

How to upload the web query result to CSV/Text file

Hi,
Kindly help me on the following.
1)       I have info-provider (IP), which has info-objects "company code" and "supplier".
2)       I built a query by putting company-code with a variable in free-charateristics and supplier-code in row.
3)       When I run this query, it will ask company-code as input and the result will be filtered using company-code.
4)       For this query, I created a web-template and assigned data-provider to display the data on the web.
5)       The user wants to enter input company-code='1000' and write the data in a CSV file in a specific directory. i.e, by clicking the execute button (after entering company code) , the result should go to the CSV or text file. i.e. the application should automatically generate the file with query results.
Note: The user should not use context menu to EXPORT TO CSV OR EXCEL file.
Please let me know, if there is any tutorial. Thanks a lot advance help.
Regards
Kandasamy

1. SELECT INTO
Below method will create table when data is inserted from one table to another table. Its useful when you need exactly same datatype as source table.
Use AdventureWorks2008R2;
Go
---Insert data using SELECT INTO
SELECT AddressLine1, City
INTO BothellAddresses
FROM Person.Address
where City = 'Bothell';
GO
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
2. INSERT INTO SELECT
Below method will need table to be created prior to inserting data. Its really useful when table is already created and you want insert data from
another table.
Use AdventureWorks2008R2;
Go
---Create Table
CREATE TABLE BothellAddresses (AddressLine1 NVARCHAR(60), City NVARCHAR(30))
---Insert into above table using SELECT
INSERT INTO BothellAddresses(AddressLine1, City)
SELECT AddressLine1, City
FROM Person.Address
where City = 'Bothell';
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Cannot acces to the selection criteria of a local query in web browser

We cannot access to the selection criteria of a local query in using the web browser
It seems this issue is already known, a local query created with BW release 7 cannot be used with the web browser.
But this is a blocking issue in our case because we cannot create another local query in using BW 3.X and if we are using the analyser with RRMX and Excel we cannot displayed more of 65000 rows due to Analyser R3.X or R7.
That's why we want to use the web browser because we can export the extraction from the intranet in MS Excel 2007 without limitation of rows.
Thanks in advance to find a solution asap

Hi Mustafa,
I checked your requirement but it is not possible to display first value as default value for a drop down list because the list will be generate when you click the drop down list. You can use a 'list box' instead of drop down list.
Regards
Basheer

Problem with the icon "Display query on the web" in Query Designer

Hi Friends,
         I was told by my PM to give them all FI Modules standard business contenet reports, so for that reason i have installed all FI business content & loaded the data in the Dev Server, now i just want to show the reports, but i want excute these reports in Internet Explorer using the Icon "Display Query on the WEB" in query designer, when i click on that it isn't getting displayed in the browser.
         the URL coming like this, "http://itcchqbd:8100/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&INFOCUBE=0FIAA_C11&QUERY=0FIAA_C11_Q0001&VARIABLE_SCREEN=X&DUMMY=1"
getting the message in the page, the page can't be displayed,
          How to solve this problem & how do i have to show the standard business content reports to all FI Superiors ?
awaiting for ur answers
Regards,
Balaji

Balaji,
first check if you have enabled web reporting on your BW server ( there is a how to paper for the same )
another way to check out the same is to find out if there are existing web templates being published which would make the server web ready.
As for FI content - activate the FI relevant areas in Business content and then activate the respective datasources and then load the data.. or go trough the best practices for BW-FI ( service.sap.com/bestpractices) wnd then activate the best practices for the same.
Hope it helps.
Arun
Assign points if useful

Config to display web browser query result ?

Similar Messages

Maybe you are looking for