Configaration error during the shared servies configuration.

Hi All,
I have configured the shared services, after that i want to test that. I went to
http://localhost:28080/interop/
I got an error:
Error: An error was encountered while performing this operation.
I tried lot, like reboot the system, deleted cookies. none works for me.
Please help me , I have been trying from so many days.
thanks in advance,
Raj.

Could you please check with <http://localhost:58080/interop>? if that doesn't work, then check the log file. (Hyperion_Home\logs\config\configtool.log or configtool_err.log). Also please paste the log details if possible.
Thanks,
KK

Similar Messages

Installation error during the sql server 2012 sp1 installation

TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.CRT,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32-policy"'. Please refer to Help and
Support for more information. HRESULT: 0x800736FD.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK

This issue occurs because of a known issue in the Visual C++ 2005 runtime library setup.
https://support.microsoft.com/en-us/kb/2688946?wa=wsignin1.0
Cumulative update information
SQL Server 2012
The fix for this issue was first released in Cumulative Update 1 for SQL Server 2012. For more information about how to obtain this
cumulative update package for SQL Server, click the following article number to view the article in the Microsoft Knowledge Base:
2679368 Cumulative update 1 for SQL Server 2012
For a stand-alone installation, follow these steps:
Download the cumulative update from the Microsoft website, and install the downloaded update package in a folder that can be accessed by the server.
Double-click the icon to run the Self-Extractor wizard. Extract the files to a folder on the server or on a UNC share.
On the server, open an administrative command prompt, and change directory to the folder that contains the RTM SQL Server 2012 setup media. For example, run the following command:
cd E:\SQLSetup\
Run Setup.exe from the command line together with the /updatesource switch to direct the setup to the folder or share that was described in step 2. For example, run the following command:
setup.exe /action=install /updatesource=C:\SQL2012CU
The setup process will detect the cumulative update. After you accept the licensing agreement, on the Product Updates page in the setup process, select the "Include SQL Server product updates" check box to apply
the cumulative update fixes to the RTM setup files.
check and confirm.

Error while installing OIM, during the OC4J Instance Configuration Assistan

Hi, running RHEL 4 32Bit Linux. There's an installation of the SOA Suite 10.1.3.1 (Release 2) on /u01/app/oracle/OracleAS_1, and I am installing OIM on /u01/app/oracle/OraHome_2
Near the end of the installation, when it's installing the recommended configuration assistants, I get an error while the OC4J Instance Configuration Assistant piece is running.
Here's the full readout:
Launched configuration assistant 'OC4J Instance Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/u01/app/oracle/OraHome_2/jdk/bin/java -Djava.net.preferIPv4Stack=true -Djava.io.tmpdir=/tmp -mx512M -classpath /u01/app/oracle/OraHome_2/dcm/lib/dcm.jar:/u01/app/oracle/OraHome_2/dcm/lib/oc4j_deploy_tools.jar:/u01/app/oracle/OraHome_2/opmn/lib/opmnplugin.jar -Doracle.ias.sysmgmt.logging.logdir=/u01/app/oracle/OraHome_2/j2ee/home/log oracle.j2ee.tools.deploy.Oc4jDeploy -oraclehome /u01/app/oracle/OraHome_2 -verbose -inifile /u01/app/oracle/OraHome_2/j2ee/deploy.ini '
Start output from spawned process:
Reading ini file - '/u01/app/oracle/OraHome_2/j2ee/deploy.ini'
Adding web-app 'wirelesssso-web.war' for app 'wirelesssso'.
Adding web-app 'web.war' for app 'sso'.
Adding web-app 'ssohelp.war' for app 'sso'.
Adding web-app 'pls.war' for app 'sso'.
OC4J instance 'OC4J_SECURITY': Adding java stop command line option '-server'
OC4J instance 'OC4J_SECURITY': Adding java command line option '-Xmx512m'
OC4J instance 'OC4J_SECURITY': Adding Environment variable 'LD_LIBRARY_PATH' with value '/u01/app/oracle/OraHome_2/lib32:/u01/app/oracle/OraHome_2/lib'
OC4J instance 'OC4J_SECURITY': Adding Environment variable 'DISPLAY' with value 'oracleb.djl.com:0.0'
Adding web-app 'ui.war' for app 'oiddas'.
OC4J instance 'OC4J_SECURITY': Adding java stop command line option '-Xss1M'
Ignoring jvm command-line option '-Xmx512m'. Larger heap already specified with '-Xmx512m'
OC4J instance 'OC4J_SECURITY': Env Option 'LD_LIBRARY_PATH' already exists with value '/u01/app/oracle/OraHome_2/lib32:/u01/app/oracle/OraHome_2/lib'
Initializing DCM...done.
Creating OC4J instance 'OC4J_SECURITY' (protected)...done.
Adding dependent libraries for application 'default'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Starting OC4J instance 'OC4J_SECURITY'...done.
Deploying application 'wirelesssso' to OC4J instance 'OC4J_SECURITY'.
Notification ==> Application Deployer for wirelesssso STARTS [ 2006-11-27T17:20:23.691EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/wirelesssso.ear
Notification ==> Copy the archive to /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/wirelesssso.ear
Notification ==> Unpack wirelesssso.ear begins...
Notification ==> Unpack wirelesssso.ear ends...
Notification ==> Initialize wirelesssso.ear begins...
Notification ==> Initialize wirelesssso.ear ends...
Notification ==> Initialize wirelesssso-web begins...
Notification ==> Initialize wirelesssso-web ends...
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/wirelesssso.ear
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/wirelesssso/wirelesssso-web.war
Notification ==> Application Deployer for wirelesssso COMPLETES [ 2006-11-27T17:20:24.193EST ]
Deploying application 'oiddas' to OC4J instance 'OC4J_SECURITY'.
Notification ==> Application Deployer for oiddas STARTS [ 2006-11-27T17:20:24.246EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/oiddas.ear
Notification ==> Copy the archive to /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/oiddas.ear
Notification ==> Unpack oiddas.ear begins...
Notification ==> Unpack oiddas.ear ends...
Notification ==> Initialize oiddas.ear begins...
Notification ==> Initialize oiddas.ear ends...
Notification ==> Initialize ui begins...
Notification ==> Initialize ui ends...
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/oiddas.ear
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/oiddas/ui.war
Notification ==> Application Deployer for oiddas COMPLETES [ 2006-11-27T17:20:28.312EST ]
Deploying application 'sso' to OC4J instance 'OC4J_SECURITY'.
Notification ==> Application Deployer for sso STARTS [ 2006-11-27T17:20:28.351EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso.ear
Notification ==> Copy the archive to /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso.ear
Notification ==> Unpack sso.ear begins...
Notification ==> Unpack sso.ear ends...
Notification ==> Initialize sso.ear begins...
Notification ==> Initialize sso.ear ends...
Notification ==> Initialize web begins...
Notification ==> Initialize web ends...
Notification ==> Initialize ssohelp begins...
Notification ==> Initialize ssohelp ends...
Notification ==> Initialize pls begins...
Notification ==> Initialize pls ends...
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso.ear
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso/web.war
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso/ssohelp.war
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso/pls.war
Notification ==> Application Deployer for sso COMPLETES [ 2006-11-27T17:20:29.806EST ]
Calling updateConfig to notify DCM of new deployments...done.
Adding OC4J mount points for application 'wirelesssso'...done.
Adding OC4J mount points for application 'oiddas'...done.
Adding dependent libraries for application 'sso'...done.
Adding OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Binding web app 'wirelesssso-web' to default-web-site for application 'wirelesssso' in OC4J instance 'OC4J_SECURITY'
Web app 'wirelesssso-web' bound successfully.
Binding web app 'ui' to default-web-site for application 'oiddas' in OC4J instance 'OC4J_SECURITY'
Web app 'ui' bound successfully.
Binding web app 'web' to default-web-site for application 'sso' in OC4J instance 'OC4J_SECURITY'
ERROR: Caught exception while binding web app 'web' to default-web-site:
Calling updateConfig to notify DCM of new web-bindings...java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: Disconnected: RMIConnection Disconnected
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:31)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:139)
     ... 8 more
Caused by: com.evermind.server.rmi.OrionRemoteException: Disconnected: RMIConnection Disconnected
     at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1621)
     at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1572)
     at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
     at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
     at __Proxy0.bindWebApp(Unknown Source)
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:28)
     ... 9 more
done.
Adding application 'wirelesssso' to the DCM repository...done.
Application 'wirelesssso' deployed successfully.
Adding application 'oiddas' to the DCM repository...done.
Application 'oiddas' deployed successfully.
Undeploying application 'sso' from OC4J instance 'OC4J_SECURITY'.
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: IOException communicating with the remote server: Connection reset
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
     ... 8 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2508)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2361)
     at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1800)
     at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:725)
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:106)
     ... 8 more
FAILED!
ERROR: Caught exception while undeploying 'sso' from 'OC4J_SECURITY':
Removing OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Calling updateConfig to notify DCM of undeployments...done.
Stopping OC4J instance 'OC4J_SECURITY'...done.
Calling SMI to retry init of failed plugins...done.
Terminating DCM...done.
Copying /u01/app/oracle/OraHome_2/j2ee/deploy.ini to /u01/app/oracle/OraHome_2/j2ee/deploy.ini.1164667126315.bak.
Writing any undeployed entries back to /u01/app/oracle/OraHome_2/j2ee/deploy.ini.
Oc4jDeploy tool completed, but with errors.
End output from spawned process.
Any help is appreciated, thanks!

Hi, did you ever resolve this problem? We've got the same error.
Cheers,
Eystein

In system log shows Error in technical configuration Error during the ret

Hi,
In sm21 it shows <Error in technical configuration Error during the retieval of logon data stored in>.
Task...... Process                     User...... Terminal Session TCode Program        Cl Problem cl         Package
30808      Dialog work process No. 009 SAPSYS                    1       TASK_VITAL_RUN K SAP Web AS Problem SOAP_FT_TOOLS
In wp trace shows below with the matched time:
A Thu May 26 13:08:03 2011
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
H
H Thu May 26 13:08:05 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
[icftrace.c   597]
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
[icftrace.c   597]
H
H Thu May 26 13:08:09 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
[icftrace.c   597]
H
H Thu May 26 13:08:10 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
[icftrace.c   597]
H
H Thu May 26 13:08:12 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
[icftrace.c   597]
H
H Thu May 26 13:08:13 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
[icftrace.c   597]
H
H Thu May 26 13:08:15 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
[icftrace.c   597]
Kind of error when retrieve the logon data.
Kernel 711 PI system
SP level 04
What possibily casued this? No further information I can have.
Thanks,
Emma

Hello
Please implement the latest kernel for your release. See note #19466. The error will not occur with the latest kernel patch.
Regards
Mark

Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

SMQ2: SYSFAIL Comparison error during the execution of a simple

Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, Martin

You seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek.

Error during the elaboration of the argument....

Hello to all,
Executing the following code:
Default_Binding_Contact port;
ContactWS_ContactQueryPage_Input qryParam;
qryParam = new ContactWS_ContactQueryPage_Input();
qryParam.pageSize = "100";
qryParam.setStartRowNum("0");
qryParam.setUseChildAnd("False");
qryParam.setListOfContact(new Contact[1]);
qryParam.getListOfContact()[0]=new Client.Contact();
qryParam.getListOfContact()[0].setContactLastName("........");
.contactQueryPage(qryParam);
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server
faultSubcode:
faultString: Error during the elaboration of the argument urn:/crmondemand/xml/contact:ListOfContact per l'operazione ContactQueryPage(SBL-EAI-04316)
faultActor:
faultNode:
Why?
thanks for the aid

Paste the entires from BCOS_CUST table
Regards
Nick Loy

APEX error: Found dead shared server

Hi,
I frequently encounter an error when working with APEX. If I submit any change to APEX, fi a change on some page item, APEX asks me to whether I'd like to save the wwv_flow_accept URL. I then get a file save dialog. This doesn't happen all the time, but something like 2 out of 10 times I submit something.
Looking at the database logs, I see an entry in alert.log with this information:
<pre>
Fri May 22 17:56:36 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_s004_1948.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Fri May 22 17:56:40 2009
found dead shared server 'S004', pid = (18, 1)
</pre>
Looking into the respective trace file gives me this information:
<pre>
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\xe_s004_1948.trc
Fri May 22 17:56:36 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Windows XP Version V5.1 Service Pack 3
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:727M/1511M, Ph+PgF:1181M/2133M, VA:1428M/2047M
Instance name: xe
Redo thread mounted by this instance: 1
Oracle process number: 18
Windows thread id: 1948, image: ORACLE.EXE (S004)
*** ACTION NAME:(PAGE 4311) 2009-05-22 17:56:36.625
*** MODULE NAME:(APEX:APPLICATION 4000) 2009-05-22 17:56:36.625
*** CLIENT ID:(CKH_DEV:2151496271973569) 2009-05-22 17:56:36.625
*** SESSION ID:(29.4) 2009-05-22 17:56:36.625
*** 2009-05-22 17:56:36.625
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_npierr+487] [PC:0x5F22C3] [ADDR:0x4] [UNABLE_TO_READ] []
Current SQL statement for this session:
COMMIT
----- PL/SQL Call Stack -----
object line object
handle number name
267D174C 1275 package body APEX_030200.WWV_FLOW
267D174C 5421 package body APEX_030200.WWV_FLOW
267D174C 13366 package body APEX_030200.WWV_FLOW
26521088 30 anonymous block
----- Call Stack Trace -----
memory dump follows
</pre>
Has anybody an idea what is going wrong on my machine here?
Best regards,
Jürgen

Hi,
I took a bit of time to dig deeper into this issue. I came to the conclusion that there is a bug in Oracle XE:
If you connect to Oracle XE database using the EPG path and if you create a report that gets its data over a database link, the shared server processes used to connect to the database break.
What I did to produce this error:
I installed Oracle XE Universal Edition on a Windows XP system
I then updated APEX to the latest version 3.2
At the database I simply created a database link pointing to the same schema the APEX-application is running at. I tested the database link.
I then produced a simple test application with just one Report (I also tried a PPR-report with the same result) that displays orders with a query in line with this:
<pre>
select o.order_id, i.order_item_id, i.quantity, p.product_name, i.unit_price, i.unit_price * i.quantity amount
from demo_orders@ckh o, demo_order_items@ckh i, demo_product_info@ckh p
where o.order_id = i.order_id
and i.product_id = p.product_id
order by o.order_id, i.order_item_id
</pre>
When I ran this application, I was sometimes able to see the report without an error, sometimes a shared server process broke. You can watch the processes breaking by opening the admin/bdump directory and see how the database writes trace files for the shared server processes.
Interesting to see is that the error happens not only when you try to see the report. If you hit the edit page link while running the page or if you submit the page definition with the link query in it, the same is likely to happen. You can see this error happening when APEX offers you to download the call to wwv_flow or the f-procedure. The contents of this download then is:
<pre>IBMPC/WIN_NT-8.1.0</pre>
with some binary information in front of the message.
Another bug I'd like to add came up when I was lucky to see the report with the PPR-template. I tried pagination but this wouldn't work. Looking into this, I found the following link:
<pre>
javascript:html_PPR_Report_Page(this,'R2060428410112776','javascript:$a_report('2060428410112776','16','15','15');')
</pre>
To my understanding this can't work at all if you look a the apostrophes. So how to proceed with this???
This to me is a severe problem, as I wanted to utilize APEX as a frontend for a production database to report the contents. I was informed by Varad that a way around this is to use an Apache access to Oracle XE but as far as I'm informed, this forces me into a licenced version in order to be able to run mod_plsql.
I read about the mod_owa-approach, but the programmers state that this is not compatible with APEX. So my question is: Do you have any suggestion on how to proceed with this?
Thanks,
Jürgen
Edited by: j.sieben on May 27, 2009 5:41 PM

ORA-20001 GET_BLOCK-ERROR during the installation of an application

hi people,
I' ve got the following error during the installation of an application in apex 2.2.
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;</pre>
Can anybody help me?
Message was edited by:
user512746

hi,
db-version is oracle 10g r2
os windows server 2003
the error occured when two ore more people working in their workspaces but not when only one person working in his workspace
Message was edited by:
user512746
Message was edited by:
user512746

DTCPing Error: 1722(The RPC server is unavailable.)

Hi,
I have Windows 7 professional on my laptop and I have Windows Server 2012 on my Server.
I have configured all the msdtc properties, the firewall is off on both the servers. Network team confirmed that the ports are open in both the directions.
When I use DTCPing to test the connection from my laptop to Server I received this error
1722(The RPC server is unavailable.)
When I tried DTCPing from Server to my laptop, I got following error:
Error(0x5) at dtcping.cpp @303
-->RPC pinging exception
-->5(Access is denied.)
Any suggestions would be really helpful.
Regards,
JD

Hi JD,
The root cause and steps to resolve this issue is very well documented in this blog below.
Refer:
Troubleshooting MSDTC issues with the DTCPing tool
Also refer:
Windows Server: Troubleshooting "RPC Server Unavailable" Errors
Most likely the port 135 is blocked and you should check with your network team to get the port 135 opened up on the firewall.
Rachit
Please mark as answer or vote as helpful if my reply does

Dedicated or shared server configuration

Hi all,
Good day...We have a 10204 rac db running on a linux server. Our concurrent connection are more than 1000..Is that good to have a shared server configuration or we can continue with dedicated server configuration...
thanks,
baskar.l

baskar.l wrote:
Good day...We have a 10204 rac db running on a linux server. Our concurrent connection are more than 1000..Is that good to have a shared server configuration or we can continue with dedicated server configuration...You make the question sound to exclusive - "shared OR dedicated".
In reality, all Oracle databases are capable of supporting both shared AND dedicated connections at the same time.
So perhaps the question becomes:
Based on the workload (typical transaction style) of the connections, how many shared and how many dedicated connections are required?
To answer that YOU need to understand your workload.

Error: Reconfiguring the Filr Server Failed

I am in the midst of my first install of Filr appliance. I am doing a Large Installation of version 1. 0.1.
All appliances are running (MySQL X 1 and Search Appliance X 2)
I have configured Mysql and Search appliance as described in the Installation and Configuration Guide.
When I run the Filr "Large Deployment" Server Configuration Wizard, the following happens-
1. It starts with the Database dialog box and I am able to connect to the Mysql server- it goes through the screen,
2. Then it prompts for Search Appliance- I key in the Search appliance details,
3. Prompts for Default Locale- I select English-- after a few minutes it gives me an error Reconfiguring the Filr server failed
I have tried redoing the Filr environment, but still the same issue.
The System Service- area shows the Novell Filr status as blank (no status)- is this normal
the logs indicate -HTTP ERROR 500, Problem accessing /vaconfig/system/logs/filr.zip. Reason: Unable to copy zipped log files to stream.
One more thing, Where do the filr logs file reside??? which folders, I am hoping the logs will give me some clue.
Can someone please advise.
thanks
Tom.

Dear Bharath,
Your PL is too low. Upgrade to the latest PL will solve this problem.
Thanks,
Gordon

P6R8.4 Professional : The Document cannot be launched. Please check the P6 server configuration.

I have used the mobile phone TM APP to upload pictures ， but i get a error when i lanunch the file, "The Document cannot be launched. Please check the P6 server configuration." Please tell me what I'm doing wrong, or direct me to a document that might help. "
Thanks ,
Kping

I have not do anything but the error changed just now , what should I do ?
Thanks ,
Kping

Publish error - error determining the .Mac publish configuration values

I have been unable to publish a website refresh for the past 2 weeks (not since the first time I tried). When I attempt to publish, it hangs at the "preparing to publish" window and then gives the error message "There was an error determining the .Mac publish configuration values. Please try again in a few minutes." It does not then release this error window to close until it pops open another window telling me how many days I have left on my trial .mac account. It has the correct number of days so I assume that it is communicating with the .mac server at some level. My internet connection is via satellite. This is my only option as I am shipboard. Update: I was able to able to connect via cable recently and, much to my surprise (and frustration), everything posted fine. I have the most recent updates for all software including iWeb running on a MacBook 2GHz, 2GB ram and 28GB free harddisk(iWeb 1.1.2 and OS X 10.4.8 build 8L2127 ). My internet connectivity is fine for other applications and for other aspects of iWeb. The primary reason I purchased the MacBook was to use the iWeb and its publishing capability. I note from other threads that this is an established problem with iWeb and satellite internet connections. Has there been any reliable fix established for this problem? The last thread I could find was last summer (and nothing from Apple), seemingly enough time for Apple (or the creative members of AppleNation) to address it. Given the high cost and sporadic reliability of shipboard internet, I'm hoping to use .mac to host site because of the incremental update capability. If there hasn't been a reliable fix determined, can anyone recommend a hosting site/method that does work reliably with iWeb and a satellite internet connection. I'm completely in the dark how this would work. This is my first website experience.
Any and all help would be greatly appreciated. I already sent out the .mac website in my Christmas letter so I'm fairly commited (but could recover, if unworkable)
Thanks mucho!
MacBook 2GHz, 2GB Mac OS X (10.4.8) shipboard satellite internet connection

Now that would be cool...if we could figure out how to tell iWeb to be a little more patient with network latency! From all the reports here, it seems that if anything, iWeb has gotten more stringent in its network latency tolerance over the various little updates.
I personally use .Mac for my iWeb hosting right now... But you are right... if you could find some alternate place to host your iWeb pages, then you can use any FTP program to do the uploading.... and maybe be more successful from the shipboard internet access.
You might take a look at some of the free webhosts available... http://www.free-webhosts.com/ I have had pretty good experience with http://www.hostfreeweb.com/.

Lightroom 5 says "There has been an error during the modification of the modules." Lightroom does not open, freezes.

Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.

Error changing modules | Lightroom

Configaration error during the shared servies configuration.

Similar Messages

Maybe you are looking for