Configuration Problem HELP

I can't complile a script.....and it won't recognise the folders for docs etc
----Configuration: <Default>--------------------
Error : Invalid path, "C:\Program Files\Java\jre1.5.0_05\bin\javac.exe" -classpath "C:\Documents and Settings\Compaq_Owner\Desktop\lit\Java" -d "C:\Documents and Settings\Compaq_Owner\Desktop\lit\Java" "C:\Documents and Settings\Compaq_Owner\Desktop\lit\Java\MyName.java"
Process completed.
ray

Hi ana thanks for your reply: But;)...
--------------------Configuration: <Default>--------------------
Process completed.
but it won't compile.....the compile button is not live, and F7 shortcut won't work either.
This is what I have in options:
JDK PROFILE = C:\Sun\SDK\jdk\
JDK TOOLS = C:\Sun\SDK\jdk\bin\javac.exe
Ray

Similar Messages

Itunes won't run because of some problem with my audio configuration? help!

it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Integration Directory(Configuration) Problem

Hi All,
I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime work bench) are working fine.
if I open Integration Directory i am getting this messge.
<jnlp spec="1.0+" codebase="http://filp55.group.upm-kymmene.com:50100/dir">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Directory</description>
        <description type="short">Directory</description>
        <description type="tooltip">Directory</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="1024m" />
        <jar href="directory/aii_ibdir_client.jar" />
        <jar href="directory/aii_ibdir_core.jar" />
        <jar href="directory/aii_ibdir_sbeans.jar" />
        <jar href="directory/aii_ibdir_rb.jar" />
        <jar href="directory/aii_ib_client.jar" />
        <jar href="directory/aii_ib_core.jar" />
        <jar href="directory/aii_ib_sbeans.jar" />
        <jar href="directory/aii_ib_rb.jar" />
        <jar href="directory/aii_util_icons.jar" />
        <jar href="directory/aii_util_swing.jar" />
        <jar href="directory/aii_util_xml.jar" />
        <jar href="directory/aii_util_xsd.jar" />
        <jar href="directory/aii_utilxi_misc.jar" />
        <jar href="directory/aii_util_rb.jar" />
        <jar href="directory/clientaii_ib_sbeans.jar" />
        <jar href="directory/clientaii_ibdir_sbeans.jar" />
        <jar href="directory/frog.jar" />
        <jar href="directory/focus14.jar" />
        <jar href="directory/sapxmltoolkit.jar" />
        <jar href="directory/jta.jar" />
        <jar href="directory/ejb20.jar" />
        <jar href="directory/exception.jar" />
        <jar href="directory/logging.jar" />
        <jar href="directory/guidgenerator.jar" />
        <jar href="directory/jperflib.jar" />
        <jar href="directory/sapni.jar" />
        <jar href="directory/sapj2eeclient.jar" />
        <property name="sap.theme" value="Streamline" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8001" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.SAPMYNAME" value="filp55_GTX_01" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50100" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50100" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="1024m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="7_00" /><property name="jnlp.rc.applname" value="DIRECTORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="${sync.time}" /></resources>
    <application-desc main-class="com.sap.aii.ibdir.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Please help me on this..........
Thanks in Advacne.
Regards,
Chandra

Hello,
1)
May be the problem is a network connectivity issue. Do one thing copy the "cahce" folder from some other client PC(which has successfully opened IR and ID) to your client PC. The folder resides in "C:Documents and Settings<yourUserProfile>Application DataSunJavaDeploymentjavaws".
Copy "cache" folder to your client PC under the above path.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
2) Go to http://filp55.group.upm-kymmene.com:50100/rep/
Click on Administration -> Java Web Start -> Java Web Start Administration ->
Try
1. Re-initialization (then try logging)
2. Re-initialization and force-signing (then try logging)
3. Delete lock (then try logging)
Do this for IR and ID tabs.
3) Check can be a firewall issue.
4) Check wether sufficient roles have been assigned -> Tcode -> SU01 -> roles tab. These roles need to be assigned to your username
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
<b>*******************Reward,if found useful</b>
Edited by: BVS on May 7, 2008 3:01 PM

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Audio configuration problem in iTunes

I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

See if this helps:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
http://docs.info.apple.com/article.html?artnum=304424

Trash and Send . I have a new IPAD 2 and I do not have any of my e mails in the send and trash folders. I have had the IPAD about three weeks and have sent and deleted many e mails. Do I have some wrong settings or configuration problem??

I purchased an IPAD 2 about three weeks ago. When I go to my Trash and Send foloders it appears that none of my deleted or sent e mails are bing captured/stored in these folders. do i have a configuration problem???

Once you connect to the Wifi Network once, then the iPhone or iPad remembers it and attempts to connect automatically in the future, but you have to tap to connect to that Wifi the first time. Like the first time you get on your home wifi, or the first time you go the a certain hotel, etc.
Now, one you navigate to Settings > Wifi and tap on the network you wish to connect to, if you are having issues there, use this article to help you: http://support.apple.com/kb/TS1398

Configuring problem..again! h-e-l-p!

So, I switched to the Linksys router after my other router would not be recognized by my computer. Configuring problems. Then I get this one..and the directions are so easy, I don't think that anything can go wrong. I have followed the directions exactly, all the proper lights are on..but once it gets to the installation part where it has to configure...it says that there is an error! Again! NOOO! I want this to work more than anything, so I hope someone may be able to help me. The first time I tried it said there was a problem sending a language pack? Then I pressed retry and the next time it said there was a data sending error. I pressed retry once again and the configuring would not go past 0% before 5 or so minutes passed and that dreadful "Data sending error!" and then "failure configuring router, would you like to try again?" screens came up!
Someone pleassssse help!
Message Edited by redsoxlove on 05-26-200711:39 AM

Just log into the router at 192.168.1.1 and configure it manually. No need to use the cd.

Hardware Configuration Problem

I've installed Windows XP partitioned on my other macs, but I'm having problems on my Mac Pro. Can anyone help with a solution, please? I have a four hard disc set up on my mac pro. The first disc is the one partitioned with my 10.6 boot on the same disc.
Using Boot Camp with Snow Leopard installed, all goes well after partitioning. It installs Windows Xp from the disc, yet when it restarts, I get a black screen with a message as follows:
"Windows could not start because of a computer disc hardware configuration problem.
Could not read from the selected boot disc. Check boot path and disk hardware.
Please check windows documentation...."
As I wrote above, as it restarts ready to load xp, it come up with the message above. And of-course, I cannot load the rest of the drivers from the 10.6 install disc.
Help, please.
Message was edited by: Philip P Thomas

I still haven't been able to install but thanks for folks advice.
Anyone else?
I have a internal four hard drive set up. The mac OS and Windows Bootcamp is set up on Hard Drive 1, whilst the other three are stiped with data, completely separate from the apps and windows.
The windows has to be set up on Hard Drive 1, the same disc as my mac boot drive. Using Boot Camp, it is not possible to set up xp/bootcamp on another hard drive other than an internal one.

Database configuring problem in setup of managed systems in SMD

Hello,
i'm doing the setup of a CRM 5.0 in SMD Abap+Java and the setup results returns following:
"Database configuration problem" with the exception:
java.lang.NullPointerException
     at com.sap.smd.server.manager.SMDPluginProperties.setProperty(SMDPluginProperties.java:114)
     at com.sap.smd.agent.plugins.database.ConfigurationTask.configureCustomProperties(ConfigurationTask.java:242)
     at com.sap.smd.agent.plugins.database.ConfigurationTask.configureProperties(ConfigurationTask.java:370)
     at com.sap.smd.agent.plugins.database.ConfigurationTask.execute(ConfigurationTask.java:124)
     at com.sap.sup.admin.setup.AppCfgTasks.configureDbApp(AppCfgTasks.java:115)
     at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:202)
     at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:217)
     at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:461)
     at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:26)
     at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:669)
     at java.lang.Thread.run(Thread.java:534)
Anybody knows which can be the problem?
Thanks a lot
Carlos

Hi Shriraj,
ensure that the installation path is correct. I only put /urs/sap/<SID> and you must put /usr/sap/<SID>/DV***/.
In my case with that the setup returns all in green.
I hope it helps you
Regards
Carlos

JDeveloper 3.1 ocijdbc8 problem (help!)

Hi,
I am trying to connect to an Oracle databse via JDeveloper 3.1. When I use the menu:
Tools->Connections->(new window) Edit -> Test connection
I keep getting an error saying "No ocijdbc8 in java.library.path"
I am sure this is a simple configuration problem but it just will not go away, no matter where I copy the ocijdbc8.dll file to.
Can anybody help! I am getting desparate.
Regards.

install the Oracle8i client on your machine, and make sure that
<ORACLE_HOME> is set correctly. (From The Tools->IDE Options and click on the environment TAB ) and select an ORACLE_HOME from the List Box)
or
Exit from JDeveloper and edit the jdeveloper.ini file which is located in
<J Developer Home>\bin.
Modify the entries:
JLP=-Djava.library.path=.;%JAVA_ROOT%\bin;%JAVA_ROOT%\jre\bin
SLP=-Dsun.boot.library.path=.;%JAVA_ROOT%\bin;%JAVA_ROOT%\jre\bin
to include the Oracle Bin directory. For example:
JLP=-Djava.library.path=.;%JAVA_ROOT%\bin;%JAVA_ROOT%\jre\bin;D:\ORA8i\BIN
SLP=-Dsun.boot.library.path=.;%JAVA_ROOT%\bin;%JAVA_ROOT%\jre\bin;D:\ORA8i\BIN
null

Windows 7 x64, Outlook 2010 and iCloud configuration - error "Outlook configuration problem"

I'm running Windows 7 x64
I had iCloud 1.x working with Outlook 2007 x32. A few months back I upgraded to Office 2010 x64, which (of course) broke the iCloud integration. I've waited for the "fix", and have now tried to get it working again with iCloud 2.11. I've tried repairing, I've uninstalled/reinstalled iCloud, I've set different default profiles, I've changed mail accounts...nada.
No matter what I do, when I get to the point of opening up the iCloud configuration and try to set up Mail, Contacts, Calendars, etc. I immediately get the following error:
"Outlook configuration problem.
Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
Any suggestions?

Hi,
Regarding the issue here, Please first take an attempt to repair your Outlook personal folder file (.pst) :
How to repair your Outlook personal folder file (.pst)
We might also take a try to reinstall the Windows Search feature:
If your installation of Windows Search got damaged, we can remove and reinstall it in the following way.
Control Panel-> Programs-> Turn Windows features on or off
Deselect: Windows Search
Press OK and wait until the installer is finished.
Reboot your computer.
Repeat the above steps to enable it again.
If still have troubles with outlook search, we may need to take a look in the Event Viewer and look for any errors logged by the “Search” or “Microsoft Outlook”, And if they are not helpful to you, please post them back in together
and we will help you troubleshoot it.
In addition, we might consider seek help in the forum below regarding outlook issues:
Outlook IT pro discussions
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Could not start the app due to a configuration problem

Hi Gurus,
I have an issue to be resolved asap, need your assistance.
I have implemented SAP Fiori apps (Approve Purchase Order, Approve Purchase Contract, My Leave Request and Approve Leave Request)
We have only one Gateway system and 3 back end ECC systems.
Gateway Client 220 is integrated with ECC Dev and performed all the configurations and tested successfully.
We have created a new client 320 with a copy of client 220, Integrated 320 client to ECC quality system and performed necessary configurations and while testing Approve Purchase order and Approve Purchase Contract tiles are loading the count from ECC Quality system but when I click on the tile it throws an error "could not start the app due to a configuration problem" and when I click the error ot is being redirected to Client 220.
From the inspect element I found below error
2015-04-13 12:22:13 INTEROP service's ResolveLink operation returned 2 targets for hash '#PurchaseOrder-approve', first one is used. - used target: {"id":"PurchaseOrder-approve~652","shellType":"FLP","postParameters":"","text":"Approve Purchase Orders","applicationData":"SAPUI5.Component=ui.s2p.mm.purchorder.approve","applicationAlias":"ApprovePurchaseOrders","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_po_apv"}
ignored target: {"id":"PurchaseOrder-approve~65k","shellType":"FLP","postParameters":"","text":"Approve Purchase Orders","applicationData":"SAPUI5.Component=ui.s2p.mm.purchorder.approve","applicationAlias":"ApprovePurchaseOrders","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_po_apv"} sap.ushell_abap.adapters.abap.NavTargetResolutionAdapter
I did not found any duplicate # key entries in table USOBHASH.
Any response is highly appreciated, thanks in advance
Regards,
Srujan

Hi Michael,
Thanks for that, I have raised an OSS message to SAP, to seek their assistance on the solution I followed to fix the issue. I have reverted back the changes and reproduced the issue for SAP guys to investigate further, at last they concluded me there is an external alias defined for /sap/bc/ui5_ui5/sap in transaction SICF in GP1/320, which contains a hard-coded client 220.
This is responsible for the fact that the services are redirected/opened in client 220
After removing the client hard-coded in system alaises under /sap/bc/ui5_ui5/ in transaction SICF, I have reverted back the change from "Alternative Logon Procedure" to "standard" in logon procedure of each service and tested, now the issue got resolved.
This could help someone to resolve the similar issue.
Thanks everyone
Regards,
Srujan

I can not enter cd or dvd in the superdrive. The entrance is blocked. What may be happening. It is a configuration problem? Thank you.

I can not enter cd or dvd in the superdrive. The entrance is blocked. What may be happening. It is a configuration problem? Thank you.

In the newer iMac, a bar blocks the slot if the drive fails to prevent inserting a disk that may not ever come out. You'll need professionl help to get this sorted.

"Windows could not start because of a computer disk hardware configuration problem. "

My hp mini notebook 100-300 is continues reboot, i have done format os and try to install window xp thorough bootable pendrive, after finished installation, system is restart as show message as " "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
so please help me what i do next...........

AmitNandha wrote:
My hp mini notebook 100-300 is continues reboot, i have done format os and try to install window xp thorough bootable pendrive, after finished installation, system is restart as show message as " "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
so please help me what i do next...........
Here's the problem XP will not install and work correctly that is why your getting that message.....Stay with the O/S that came with the laptop if you want to have stability in software and hardware operations.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Configuration Problem HELP

Similar Messages

Maybe you are looking for