Configuration Settings for Web Dynpro
Please tell me ICM and ICF configuration settings for Web Dynpro programs.
Can anybody tell me what is pre requirment for Web Dynpro.
hi Shweta ,
pls refer the SAP online help :
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/fa/a5554a1de4964e8459851782eddda3/frameset.htm
regards,
amit
Similar Messages
-
How to configure SSO for web dynpro ABAP (not web dynpro Java)
Hi Experts,
I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
procedure"
Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
PiyushHi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N -
BASIS settings for Web Dynpro ABAP
Hi Team,
I need to know of settings required (configuration) for Web Dynpro ABAP. Please help me on this. Please also let me know of how these settings can be implemented.
Regards,
AmitHi Amit
First you have to check the domain, if it is not maintained then maintain the domain in your operating system.
To do this, follow below path :
-- Right click on My Computer >> Computer Name tab >> Click Change >> Click More >> Enter your domain name in the format u201Ccompanyname.comu201D in the section Primary DNS Suffix of this computer
u2013 Click OK
And then go to your SAP to set "icm/host_name_full" in transaction RZ10.
Choose your Instance profile, click on Extended Maintenance and then click on the Change button
As "icm/host_name_full" is not present for you, add it by using the New parameter button
set the value to <hostname>.companyname.com (hostname can be seen through transaction RZ11).
Save and activate your profile and after that restart the R/3 server to take effect.
Hope this will solve your issue.
Regards
Brillion -
Global settings for web dynpro ABAP: WD_GLOBAL_SETTING
Hi Experts,
SAP documentation states to maintain settings globally for all Web Dynpro for ABAP applications. Execute the WD_GLOBAL_SETTING Web Dynpro for ABAP application. i tried on transaction se80 under webdynpro appl/comp
i am unable to find this application ??
how can i call WD_GLOBAL_SETTING and set the WDTABLENAVIGATION parameter to SCROLLBAR.Hi
You can access the application using
https://<host>:<port>/sap/bc/webdynpro/sap/wd_global_setting/
I think that's available in SP13
Abhi -
Finding configuration settings for web service??
Hi Experts,
I have found that a particular web service that I am using is running from sr2.esworkplace.sap.com is there any way to find the settings of how to set this up in the Destination Template Manager of my server in order for the app to work. I would appreciate any help that can be offered. ThanksHi,
You cannot configure the services residing on ES workplace, but can connect your WebDynrpo to the ESR or the Services Registry to access the services. The services listed in ESR will not have endpoint information, and since you cannot access the configuration, you won't be able to call them. So access the services from the services registry, the WSDL files will have the endpoints as well as the security configurations, and your dynpro will generate all relevant classes and set the endpoint for you as well. Since you will have the endpoint info, you can also create your own logical port in NWA for your client application manually afterwards too.
Check out the simple sample applications and ES Workplace Handbook at:
(Link Removed)
Regards,
Gökhan
Edited by: Jason Lax on Apr 12, 2011 3:28 PM as content behind link deleted. -
Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
createDeployment.Add(xName);
createDeployment.Add(xPackageUrl);
createDeployment.Add(xLabel);
createDeployment.Add(xConfiguration);
createDeployment.Add(xStartDeployment);
createDeployment.Add(xTreatWarningsAsError);
requestBody.Add(createDeployment);
requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
request.Method = method;
request.Headers.Add("x-ms-Version", version);
request.ClientCertificates.Add(certificate);
request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
requestStream, System.Text.UTF8Encoding.UTF8))
requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
response = (HttpWebResponse)ex.Response;
try
statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
requestId = response.Headers["x-ms-request-id"];
finally
response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
uri.ToString(),
Environment.NewLine,
(int)statusCode,
statusCode,
responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
ShubhenduPlease find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>77u/PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0idXRmLTgiPz4NCjwhLS0NCiAgKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKg0KDQogIFRoaXMgZmlsZSB3YXMgZ2VuZXJhdGVkIGJ5IGEgdG9vbCBmcm9tIHRoZSBwcm9qZWN0IGZpbGU6IFNlcnZpY2VDb25maWd1cmF0aW9uLkNsb3VkLmNzY2ZnDQoNCiAgQ2hhbmdlcyB0byB0aGlzIGZpbGUgbWF5IGNhdXNlIGluY29ycmVjdCBiZWhhdmlvciBhbmQgd2lsbCBiZSBsb3N0IGlmIHRoZSBmaWxlIGlzIHJlZ2VuZXJhdGVkLg0KDQogICoqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioNCi0tPg0KPFNlcnZpY2VDb25maWd1cmF0aW9uIHNlcnZpY2VOYW1lPSJXaW5kb3dzQXp1cmUxIiB4bWxucz0iaHR0cDovL3NjaGVtYXMubWljcm9zb2Z0LmNvbS9TZXJ2aWNlSG9zdGluZy8yMDA4LzEwL1NlcnZpY2VDb25maWd1cmF0aW9uIiBvc0ZhbWlseT0iMSIgb3NWZXJzaW9uPSIqIiBzY2hlbWFWZXJzaW9uPSIyMDEyLTA1LjEuNyI+DQogIDxSb2xlIG5hbWU9IldlYlJvbGUxIj4NCiAgICA8SW5zdGFuY2VzIGNvdW50PSIyIiAvPg0KICAgIDxDb25maWd1cmF0aW9uU2V0dGluZ3M+DQogICAgICA8U2V0dGluZyBuYW1lPSJNaWNyb3NvZnQuV2luZG93c0F6dXJlLlBsdWdpbnMuRGlhZ25vc3RpY3MuQ29ubmVjdGlvblN0cmluZyIgdmFsdWU9IkRlZmF1bHRFbmRwb2ludHNQcm90b2NvbD1odHRwcztBY2NvdW50TmFtZT1zaHViaGVuZHVzdG9yYWdlO0FjY291bnRLZXk9WHIzZ3o2aUxFSkdMRHJBd1dTV3VIaUt3UklXbkFrYWo0MkFEcU5saGRKTTJwUnhnSzl4TWZEcTQ1ZHI3aDJXWUYvYUxObENnZ0FiZnhONWVBZ2lTWGc9PSIgLz4NCiAgICA8L0NvbmZpZ3VyYXRpb25TZXR0aW5ncz4NCiAgPC9Sb2xlPg0KPC9TZXJ2aWNlQ29uZmlndXJhdGlvbj4=</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G -
Different languages are not available for Web Dynpro ABAP (WDA)
Hi Experts,
We are using Web Dynpro ABAP in 2 different languages (English/Spanish). Production environment only is available for English (WDA).
How can I make Spanish language available for Web Dynpro ABAP??. Is there any configuration or installation which I am missing?? Development and QA are OK (English/Spanish)
Thank you.
Regards
David Cortés.Hi Experts,
Any help???
Regards
David Corté -
Whats the initial DC for Web Dynpro DC from scratch
Hi,
I want to develop a Web Dynpro Development Component from scratch. So what is the default/initial DC that I have to import from DTR/JDI?.
Thanks,
Raj.Hi,
rather sparse information... anyway if you start with the "Local Development" configuration in the IDE all required DCs should be part of the NWDS installation.
Otherwise you need to have a track configured that contains SAP_BUILDT, SAP_JTECHS and SAP-JEE. Those three SCAs contain all DCs required for Web Dynpro development.
Regards,
Marc -
What are the settings for web?
What are the settings for web?
800mbps Quicktime for the web,< </div>
The compression is reducing the number of pixels being shown in order to maintain the bitrate. So rapid motion, which requires nearly all of the pixels to be redrawn, causes things to stutter.
Compression is really, really hard to do. Really.
bogiesan -
Configuration Settings for Postal Adress Validation and Duplicate Check
Hi,
What are The Configuration settings for Postal adress validation and Duplicate Check for Accounts(BP'S) in CRM 7.0 version
Can some one send me the configuration settings for Postal Adress validation and Duplicate Check
Thanks & Regards
Kishor KumarHi kishore kumar,
For the Postal code Validation you need to install and configure the following
Outside of your SAP system:
1. Install Data Services and the Address Directories.
2. Install Data Services Component.
3. Install the RFC Server.
On your SAP system:
4. Install the BAdIs from the previous version of this product.
5. Install the BAdIs support package from this version.
6. Run the post-installation tasks required of a new installation of the BAdIs.
7. Activate the IC WebClient, if desired.
Thanks
Jayakrishnan Nair -
Search help for Web Dynpro using the SAP-search help
Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen -
can anybdy tell any link to get the study materials for web dynpro for java in .pdf format.
Hi,
there you can find the entire documentation, you normally have a look at help.sap.com, in pdf format (it's NW2004s, SP 5 or 6, I guess)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/nw/netweaverdevelopersguide2004s/sap%20netweaver%20developer's%20Guide%202004s/UsingJava_00_PDFsList.ca
(copy & paste the link, directly it won't work )
kind regards
Stefanie -
How do I get the configuration settings for GPRS mms ect for EE
Hiya :)
My son-in-law got a new iphone4s as an upgrade from EE/orange on Tuesday 18th feb 2014
It was an upgrade for his sim only contract changed to a phone and sim
The first phone he had was a samsung galaxy s3 mini but he couldn't get used to it as had used his old iphone4 for over 4 years before it died
The samsung galaxy s3 mini was sent back and a nice shiny iphone4s was sent out instead and he got it on the date up top
The sim that came with the iPhone keeps saying invalid for some reason?
But the sim he got with the sg3 mini works but has no configuration settings for the iphone4s in it only for the sg3 mini
We have tried online looking for the settings for wap/GPRS/mms/edge ect to send via SMS but can't seem to find anywhere that works?
Can anybody help please?
His partner (my daughter) is expecting there 2nd baby and he wants these set up ASAP
He can recieve calls and make calls and do the same with SMS but no Internet/mms ectCheck out FEBE. <br />
https://addons.mozilla.org/en-US/firefox/addon/2109/ -
How to create search help for Web Dynpro?
Hi all,
I have troubles when creating search help for web dynpro. I have visited this link /people/dirk.rehberg/blog/2006/12/27/generic-search-help-for-web-dynpro-for-java but I can't find this generic search help plug-in for download. If u have this plug-in can u share it for me or upload somewhere for download. Or anyone has already done this search help please help me solve this problem! Thanks in advance!Hi Dinh Thieu Thien,
please place such a request to the appropriate forum "[Web Dynpro for Java|Web Dynpro Java;".
Thanks and regards,
Boris -
Configurational settings for data source in BI server
Hi Sdns,
Where can we make configurational settings for data source in BI server.
Advance thanks to replies.
karunGo to T-code RSA13.
Search you desired BI system.
Right click on it and Display Data Source Tree.
There you can see all your datasource with BI as source system.
You can do the same for other source systems.
Double click on the datasource to see the fields and configuration.
Maybe you are looking for
-
New to this iPOD game, and having problems! Please help!
So I finally got my hands on a Nano yesterday, and ever since then some odd things have been happening. I would appreciate any help to the following questions/problems I've been having, because the applecare stuff does not seem to really be either he
-
EBS: RFEBGB00 No line items found
Hello All, When I try to post the Electronic Bank Statement in Great Britan into the system through RFEBGB00 (FF_5), the system is picking up the header the trailer data correctly. Whereas, the transaction data is not getting posted and it shows "No
-
To change the default date format of OID
Hello Gurus, Any idea on how to change the default date format of OID? The default date format of OID is something like "yyyy-mm-dd hh:mm:ss .0-0700" I want to change it to "yyyymmddhhmmss.0-0800". Is there any system property to do the same. I have
-
Reparation process for goods delivered back from customer for repair
Dear friends, I have to create an "easy" process with which we can create a sort of "return from customer". This process should enable us to create us a "customer stock". So value should not be on our plant but we need to show, that there is a materi
-
Why is Imovie not free anymore ?? And why did it disappear from my Mac ?
I do not understand why would it disappear