Configuration Template Builder gives error when selecting domain
Hello,
I'm trying to use the Configuration Template Builder on Solaris to
create a template. I'm starting the builder like this:
java -client -jar /bea/weblogic81/common/lib/config.jar -target=template
When it asks what domain I want to create a template for, I select one
of my domains, then click on the Next button. After a second or two I
get the following stacktrace in the console. I then get similar errors
later in the process.
java.io.IOException: Unable to resolve input source.
java.lang.NullPointerException
at
com.bea.plateng.domain.jdbc.JDBCAspectHelper.getGenericJDBCDriverInfo(JDBCAspectHelper.java:860)
at
com.bea.plateng.domain.jdbc.JDBCAspectHelper.getGenericJDBCDriverInfo(JDBCAspectHelper.java:385)
at
com.bea.plateng.domain.assignment.JDBCPoolJMSJDBCStoreAssignment.createSourceTree(JDBCPoolJMSJDBCStoreAssignment.java:59)
at
com.bea.plateng.domain.assignment.AssignmentTree.buildModel(AssignmentTree.java:335)
at
com.bea.plateng.domain.assignment.AssignmentTreeDefinition.createAssignment(AssignmentTreeDefinition.java:302)
at
com.bea.plateng.domain.DomainTemplate.getAssignment(DomainTemplate.java:923)
at
com.bea.plateng.domain.event.assignment.JMSServerServerAssignmentListener.getJDBCConnectionPool(JMSServerServerAssignmentListener.java:107)
at
com.bea.plateng.domain.event.assignment.JMSServerServerAssignmentListener.doAssign(JMSServerServerAssignmentListener.java:50)
at
com.bea.plateng.domain.event.assignment.AssignmentTreeListener.vetoableChange(AssignmentTreeListener.java:77)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:188)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:155)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:138)
at
com.bea.plateng.common.comdev.TreeDataModel.setAttribute(TreeDataModel.java:191)
at
com.bea.plateng.domain.assignment.AssignmentTree$SetInitialSelectionVisitor.visitTree(AssignmentTree.java:1020)
at
com.bea.plateng.common.comdev.TreeVisitor.visit(TreeVisitor.java:24)
at
com.bea.plateng.common.comdev.PreOrder.preVisit(PreOrder.java:34)
at
com.bea.plateng.common.comdev.TreeHelper.depthFirstTraversal(TreeHelper.java:42)
at
com.bea.plateng.common.comdev.TreeHelper.depthFirstTraversal(TreeHelper.java:47)
at
com.bea.plateng.common.comdev.GeneralTree.accept(GeneralTree.java:220)
at
com.bea.plateng.domain.assignment.AssignmentTree.buildModel(AssignmentTree.java:359)
at
com.bea.plateng.domain.assignment.AssignmentTreeDefinition.createAssignment(AssignmentTreeDefinition.java:302)
at
com.bea.plateng.domain.DomainTemplate.getAssignment(DomainTemplate.java:923)
at
com.bea.plateng.domain.DomainChecker.syncAssignments(DomainChecker.java:223)
at
com.bea.plateng.domain.TemplateBuilder.buildDomainTemplate(TemplateBuilder.java:1177)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.buildTemplate(TemplateLoaderTask.java:243)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.execute(TemplateLoaderTask.java:160)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.run(TemplateLoaderTask.java:133)
at java.lang.Thread.run(Thread.java:534)
I should point out why this is a problem for me. The config.xml of the
domain I'm tring to make a template for puts relative pathnames for the
location of some of the components. For example, JMS Event Generators
are put in the config.xml with a path of "."
If I run the Config Template Builder from the only directory from which
it works (the directory with the config.jar file, which is common/lib),
then these relative paths will not work. I get the error shown below
when trying to create the template jar:
Preparing...
Compressing Configuration Template Contents...
Configuration Template Creation Failed!
Configuration Template Location: /bea/user_templates/demoServer1.conf.jar
Reason: Unable to locate file: ./WLIJmsEG_ResponseGenerator.jar
Exception:
com.bea.plateng.domain.GenerationException: Unable to locate file:
./WLIJmsEG_ResponseGenerator.jar
at
com.bea.plateng.domain.TemplateGenerator.generate(TemplateGenerator.java:173)
at
com.bea.plateng.wizard.domain.gui.tasks.DomainCreationTask$1.run(DomainCreationTask.java:222)
So, I wanted to try and run the Template Builder from the domain's
directory, but then I get the error shown below.
Any help is appreciated.
Steven Ostrowski wrote:
Note: I only get this error when running the Template Builder in a
directory other than the /common/lib directory.
If I run this command in any other directory, I get this error. If I run
the command in the common/lib directory, I do not get the error.
Steven Ostrowski wrote:
Hello,
I'm trying to use the Configuration Template Builder on Solaris to
create a template. I'm starting the builder like this:
java -client -jar /bea/weblogic81/common/lib/config.jar -target=template
When it asks what domain I want to create a template for, I select one
of my domains, then click on the Next button. After a second or two I
get the following stacktrace in the console. I then get similar errors
later in the process.
java.io.IOException: Unable to resolve input source.
java.lang.NullPointerException
at
com.bea.plateng.domain.jdbc.JDBCAspectHelper.getGenericJDBCDriverInfo(JDBCAspectHelper.java:860)
at
com.bea.plateng.domain.jdbc.JDBCAspectHelper.getGenericJDBCDriverInfo(JDBCAspectHelper.java:385)
at
com.bea.plateng.domain.assignment.JDBCPoolJMSJDBCStoreAssignment.createSourceTree(JDBCPoolJMSJDBCStoreAssignment.java:59)
at
com.bea.plateng.domain.assignment.AssignmentTree.buildModel(AssignmentTree.java:335)
at
com.bea.plateng.domain.assignment.AssignmentTreeDefinition.createAssignment(AssignmentTreeDefinition.java:302)
at
com.bea.plateng.domain.DomainTemplate.getAssignment(DomainTemplate.java:923)
at
com.bea.plateng.domain.event.assignment.JMSServerServerAssignmentListener.getJDBCConnectionPool(JMSServerServerAssignmentListener.java:107)
at
com.bea.plateng.domain.event.assignment.JMSServerServerAssignmentListener.doAssign(JMSServerServerAssignmentListener.java:50)
at
com.bea.plateng.domain.event.assignment.AssignmentTreeListener.vetoableChange(AssignmentTreeListener.java:77)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:188)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:155)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:138)
at
com.bea.plateng.common.comdev.TreeDataModel.setAttribute(TreeDataModel.java:191)
at
com.bea.plateng.domain.assignment.AssignmentTree$SetInitialSelectionVisitor.visitTree(AssignmentTree.java:1020)
at
com.bea.plateng.common.comdev.TreeVisitor.visit(TreeVisitor.java:24)
at
com.bea.plateng.common.comdev.PreOrder.preVisit(PreOrder.java:34)
at
com.bea.plateng.common.comdev.TreeHelper.depthFirstTraversal(TreeHelper.java:42)
at
com.bea.plateng.common.comdev.TreeHelper.depthFirstTraversal(TreeHelper.java:47)
at
com.bea.plateng.common.comdev.GeneralTree.accept(GeneralTree.java:220)
at
com.bea.plateng.domain.assignment.AssignmentTree.buildModel(AssignmentTree.java:359)
at
com.bea.plateng.domain.assignment.AssignmentTreeDefinition.createAssignment(AssignmentTreeDefinition.java:302)
at
com.bea.plateng.domain.DomainTemplate.getAssignment(DomainTemplate.java:923)
at
com.bea.plateng.domain.DomainChecker.syncAssignments(DomainChecker.java:223)
at
com.bea.plateng.domain.TemplateBuilder.buildDomainTemplate(TemplateBuilder.java:1177)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.buildTemplate(TemplateLoaderTask.java:243)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.execute(TemplateLoaderTask.java:160)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.run(TemplateLoaderTask.java:133)
at java.lang.Thread.run(Thread.java:534)
Similar Messages
-
Programmatic Build gives error when in an executable
I'm using the programaticbuild.vi (sse attachement). It works fine when I'm in development but when I run the executable I get an error 7.
To demonstrate the problem, I attach some files: the Addtion.vi and the Addition.proj which is the project to build an executable to add 2 numbers.
I now use the ProjectBuilder.vi and ProjectBuilder.proj. to build an application where I give the path to a project file and it builds this project file.
If you run the ProjectBuilder.vi and give it as an input path the Addition.proj , the Addition.exe will be created successfully. But if you build the ProjectBuilder.proj then run the ProjectBuilder.exe and again give it the path to the Addition.proj, this will give you an error.
I have come across to other similar problems but I couldn't find a solution to my problem.
Thanks
Attachments:
builds.zip 21 KBHi,
Just a random thought, You can try using the "open VI reference" function instead of using the path control alone.
Regards,
Nitzz
(Give Kudos to good Answers and Mark it as a Solution if your problem is Solved) -
Hello. I built an executable using App Builder in LV 5.1.1 and now, years later, I am trying to run it in LV 6.1 but I get an error stating a requirement for Run Time Engine version 5.1.1. To be able to run this, must I install the older version of Run Time Engine? If so, where can I find the older version? Do I have to install the older version of LabVIEW to get the RTE? Will having both versions on my pc be a problem?
I assume that once I am able to run the exe, that I will be able to recompile with the newer version of the RTE using App Builder. Is this correct?
I have been away from LabVIEW for several years and am a bit rusty on these details that I once knew. Any help is appreciated.
AlexThe version of the run-time engine must match the version of LabVIEW that was used to create the executable. You can get any version of the run-time engine you want here. The only way to create a version 6.1 exe is to re-build it from the source code with diagrams. An exe has no block diagram so it cannot be converted to a newer version.
-
Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, NamanHi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu -
Error when selecting the Report Center tab of the Issues web DB
I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?Hi Ben
Wyer,
Have you resolved
your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
Best Regards,
Bruce Song [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Outlook 2010 gives error when opening a PowerPoint attachment.
Outlook 2010 gives error when opening a PowerPoint attachment.
Hi All,
We have several VIP employees that are getting the following error on all PowerPoint documents that come as attachments from Outlook.
I have researched and tried the following steps and verified these settings are already applied.
I did find a work around but not a fix and our security team will NOT allow me to change this setting however if I uncheck the setting all employees can open the outlook attachment.
Any other ideas on a fix for this if I am unable to uncheck Enable Protected View.Hi Matthew,
This is a perennial problem, here is a thread which has a deep discussion about this issue:
http://social.technet.microsoft.com/Forums/office/en-US/07f710a5-a6ca-4256-8f27-6aac41a6b37e/outlook-2010-unable-to-open-word-excel-and-power-point-attachments-from-an-email?forum=outlook
It looks like nobady really find a solution there, the only workaround is what you have found - change the protected view setting in Trust Center. You will lose some security by doing this but it seems to be the only solid solution currently. -
Error when select posting level in document type
Hi,
Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
The Error is : GETWA_NOT_ASSIGNED
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
If it doesn't not help - open customer message to SAP.
Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM -
Hello,
I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
Now it does but I get an error when selecting the volume for Time Machine. The error says:
"The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
Does anybody have a clue what I need to do to get my Time Machine working again?
Thanks!
BBBauke Boezeman wrote:
Hello,
I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
Now it does but I get an error when selecting the volume for Time Machine. The error says:
"The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
Hi, and welcome to the forums.
I'm not sure if that's the same message, but it sounds like a common permissions problem.
Try this: Open the Terminal app (in your Applications/Utilities folder).
In Terminal, the prompt looks like this: user-xxxxxx:~ <your name>$
(where <your name> is your short user name). It's followed by a non-blinking block cursor (unless it's been changed via Terminal > Preferences).
At the prompt, type the following exactly as shown, substituting the name of your TM drive exactly, including any spaces, between the quotes:
sudo chmod 644 /volumes/"TM drive name"/.0011246f8842
Press Return. You'll get some warnings and a request for your Administrator's password. Type it in (it won't be displayed) and press Return again.
Then try a +Back Up Now.+ -
Hi,
Workflow status web part gives error when going back to previous stage (using GO TO) transition activity in Project Server 2013 workflow.
Please guide how to create a workflow which restarts from a desired stage.Thanks for your prompt reply....
It gives following error
Workflow Status
This Web Part was unable to load.
Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: e95a9c9c-1f68-90d7-0a3e-5951df70fec6
For more information, contact your Project Web App administrator.
what do you mean to restart the Project Server 2013 with different project name, please elaborate.... -
Good morning, my photoshop stopped working, it gives error when started, what can it be?
This is the message that appears:
Unable to start the program it took a unexpected end of file
I hope answerCould not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
Mylenium -
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE
제품 : AOL
작성날짜 : 2003-04-07
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
================================================
PURPOSE
Problem Description
sqlplus 에서 mfg_lookups table을 select할때,
ORA-1722 Invalid number 에러발생
Workaround
Solution Description
=======================================================
CREATE OR REPLACE VIEW mfg_lookups(
lookup_type,
lookup_code,
meaning,
description,
enabled_flag,
start_date_active,
end_date_active,
created_by,
creation_date,
last_update_date,
last_updated_by,
last_update_login
AS
SELECT lv.lookup_type,
TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
lv.meaning,
lv.description,
lv.enabled_flag,
lv.start_date_active,
lv.end_date_active,
lv.created_by,
lv.creation_date,
lv.last_update_date,
lv.last_updated_by,
lv.last_update_login
FROM fnd_lookup_values lv
WHERE lv.LANGUAGE = USERENV('LANG') AND
lv.view_application_id = 700 AND
lv.security_group_id =
fnd_global.lookup_security_group(lv.lookup_type,
lv.view_application_id)
=================================================================
MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
이와 같은 에러를 발생한다.
이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
다시 등록하니 해결됨.
Reference Documents
-------------------Yes but this is a regular operation and the INSERT is the only opportunity.
BTW, look at what else I have just found:
INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
OK. -
Configuration Template Builder WL8.1 does not work
Hello,
After spending nearly 2 days now trying to get a Configuration Template
built, I've concluded this simply does not work. Has anyone used the
Config Template builder to package a semi-complex application on top of WLI?
I'm trying to have 2 of my applications, the JMS and JDBC resources,
and a WLI event generator packaged up for easy deployment to someone
else's server configuration. The problem with this is that there are
required resources for WLI, namely a database. The Pointbase database
included for WLI does not get included in the template automatically.
There are also some flat-out bugs:
If you choose to include a resource adapter "application", such as
jms-xa-adp.rar, the template builder does not bundle this in the
template and deploy it correctly. The template builder restricts you to
putting applications in the relative path starting at ./
For jms-xa-adp.rar, its original location is in $WL_HOME/server/lib, and
the template builder defaults to put it in ./lib of your template.
However, when you create a domain with the template, jms-xa-adp.rar does
not get placed in your ./lib directory. This causes you to then go and
manually edit your config.xml to point back at $WL_HOME/server/lib or to
manually copy jms-xa-adp.rar into your ./lib directory (which the
template mechanism should do for you).
Relative paths in the config.xml file require you to execute the config
builder from the directory of the domain you are making a template for.
The template builder should instead be smart enough to realize that
relative paths in the config.xml file are relative to the directory that
the config.xml is in, not the one you are running the template builder
from. You'll get an error when trying to create the template cause it
won't find the resources if you're not in that directory.
If anyone has successfully used this to package a WLI application in a
template, please share your experiences and how to do so. In the
meantime, I'm claiming there is no way to nicely package up a server
configuration for a WLI app in Weblogic, and this is a big shortcoming.
Weblogic needs a simple transferrable way of creating server
configurations (it tries to do this with the template, but that is
failing). With JBoss, for example, you simply copy your server directory
into another installation. This doesn't work with Weblogic unfortunately
because it puts hard-coded paths in the config.xml file.
ThanksRuss,
Thank you for the detailed responses. The only one I'm currently
struggling with still is the #5, with the scripts between the two. One
of the major benefits of using a J2EE App Server is supposed to be the
portability between servers. I find it disconcerting that BEA Weblogic
restricts me to the platform I created the domain on by creating
platform-specific startup/shutdown scripts for only the platform created
on. It's understandable that a script converter would be difficult, but
at least both the .sh/.cmd files should be created from the first time
you make a domain. If the user only wants one or the other, they can
delete the appropriate one. It's also understandable that the
users/deployers shouldn't have to manually convert a startup/shutdown
script to take the domain to a different box.
JBoss clearly has BEA beat on ease of deployment here. Their model is
the concept I'm thinking of: you have some generic startup/shutdown
scripts that can load a platform-independent server configuration. You
truly can copy directories as-is between JBoss installations.
I was hoping to package up a server domain for use on any of the
supported platforms, but since I don't have the time to manually convert
the startup/shutdown scripts, I'm going to have to tell people it's only
for Solaris now.
Hopefully BEA can fix this in a future SP. There's no need for this
platform-dependency. Also, if the Windows version can generate both
scripts at creation time, then the Solaris should be able to do this as
well (or at least give you the option).
Thanks again for the replies
russ wrote:
Hi Steven,
I have several comments and questions about your last two posts. I will try to
address them in order.
1) "The Pointbase database included for WLI does not get included in the template
automatically."
By default the template builder only includes the *.cmd and *.sh files in the
template from your domain directory. If you begin building with an existing
domain template all files that were in the template will get included. This was
done because there is no way for the builder to automatically determine all the
files that are required by your template/domain and we steered away from recursively
including all files from the directory so that unused files were not needlessly
included. We can extrapolate some files based on the application paths in the
config.xml, but the rest is left up to the template builder to be aware of what
is needed for their domain to run. So, if you need the Pointbase *.dbn and *.wal
files included in your template just select these files on the ?Add Files? panel
of the template builder and add them to the ?Domain Directory?.
2) ?If you choose to include a resource adapter "application", such as jms-xa-adp.rar,
the template builder does not bundle this in the template and deploy it correctly.?
The template builder considers application files to be in two categories: Imported
or Internal. When you are at the ?Add Applications? panel of the builder you
will see a checklist of all the applications that are in the domain you selected.
On the right hand side there are two text fields. The top one displays the application
path as it is currently set in the config.xml of that domain. The bottom field
will be different depending on what category the application falls into. As you
click on each application in the list, you may notice that the bottom field may
change from an editable field titled ?Imported Application Path? to a non-editable
field titled ?Internal Application Path?. The difference between the two categories
is that an ?Imported? application?s files will be included in the template jar.
An ?Internal? application?s files will not be included in the template jar because
they are considered internal to the weblogic installation. The jms-xa-adp.rar
should fall into the internal category and should not get included in your template.
From what you are describing it sounds like the builder attempted to import that
application when it should not have. In an attempt to recreate the problem you
are seeing I deployed that Connector Module through the WLS console and ended
up with an application path of ?C:\bea\weblogic81\server\lib? where ?C:\bea\weblogic81?
is my WL_HOME (a.k.a. USER_INSTALL_DIR). If I then attempt to build a template
from this domain, the builder recognizes this as an internal path and does not
include it inside my template. If the current application path you had looks
different from the one above, that may explain why the builder was attempting
to import it. What was the value of the ?Current Application Path? for that application
deployment?
3) ?Relative paths in the config.xml file require you to execute the config builder
from the directory of the domain you are making a template for.?
The builder is ?smart? enough to determine relative paths. You should not have
to invoke it from the domain directory you are working with. There is a known
bug in the WebLogic Platform 8.1.1.0 release of the template builder that will
cause it to not find files with relative paths in your domain directory if the
application path in the config.xml is just a ?.?. If this is the case, you should
see a FileNotFoundException when you attempt to create the template. This will
be fixed in SP2 and you can work around this problem by changing those paths to
?./? instead. If this was not the case, what was the path the wizard choked
on?
4) ?Looking through the config file, it seems that it's all of the WLI components
that have absolute paths in the config file. In addition, BEA_WLS_DBMS_ADK has
an absolute path, not sure if that is WLI or WLS. ?
BEA_WLS_DBMS_ADK is an integration application. If you created the original
domain using the configuration wizard most of the applications in an integration
enabled domain will reference paths inside of you installation directory or ?internal?
paths. For instance, I used the wizard to create a ?Basic WebLogic Integration
Domain?. The path for that application in this domain is: ?C:\bea\weblogic81/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear?
where ?C:\bea\weblogic81? is my WL_HOME or USER_INSTALL_DIR. When I load this
domain into the builder it shows this application as ?internal? and the ?Internal
Application Path? is "$USER_INSTALL_DIR$/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear".
This will be set as the path value of this application in the config.xml that
will be included in the template you build. When you later use the Configuration
Wizard on this template it will substitute the $USER_INSTALL_DIR$ to the value
of the installation directory of the machine you are creating it on.
If you were to Change these to relative paths, as Mark previously suggested,
it will only work if you copy the domain directory to the same location relative
to your installation directory on the target machine. Also, if you copy the domain
in this manner you will more than likely run into problems with your start/stop
scripts and be forced to hand modify all the paths contained within. The configuration
wizard tries to alleviate these problems and make the configuration entirely portable.
This gives the user who creates the domain from your template the ability to
put it anywhere they want regardless of the paths in the config.xml.
5) ?However, there is another major problem with the Template Builder: it only
includes the startup/shutdown script for the platform you create the template
on. ???I built the template on Solaris with the UNIX scripts. However, I tried
to create a new config on Windows with this template, and the scripts were not
converted to .bat files!?
As I stated previously, the builder will only include *.cmd and *.sh scripts
into your template by default. If you created the domain on a unix platform using
the configuration wizard it will not extract the *.cmd files since these aren?t
considered to be useful on unix. If you were then to attempt building a template
from this domain and take it onto a windows platform, it will obviously be missing
any windows scripts. Conversely, the wizard will extract *.sh scripts on windows
because they can still be useful if a user has an MKS or Cygwin type environment
installed. The config wizard and template builder do not have the ability to convert
scripts. The builder will only include existing scripts that are in your domain
directory and automatically determine any necessary string substitutions that
will be needed. Please note that since WebLogic is only supported on the NT/2K/XP
versions of windows you will find that the wizards use ?.cmd? files and not ?.bat?
files since these are more commonly associated with Win 95/98/ME.
I will be happy to answer any more questions you may have and would also like
to take a look at your domain configuration to try and get a better understanding
of the problems you are encountering.
thanx,
russ -
OPM gives error when trying to use XSLT stylesheet
Hi,
I am trying use a simple XSLT stylesheet into an OPM project and see the result in the web determination screen.But when ever i am clicking on the link that is created when i compile the project with the XSL file, i am getting the error
"An error occurred trying to process your request.
This error has been logged and is available in the application logs.
For support and assistance please contact [email protected]"
I have kept the XSL file inside the "templates" folder in "include" folder.
I am using a very simple one i.e
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version="1.0" >
<xsl:output method="html"/>
</xsl:stylesheet>
How do I find what the error is and what do I need to do to solve this?
Thanks and regards
SagnikYes, now that above issue is solved and now when I click on the "HTML" or "PDF" link, I think some file is being generated but not properly.
For HTML, I am getting blank page error and for PDF I am getting "file is damaged" error.May be, the xslt stylesheet that I am using is wrong, but I am absolutley stuck with this. I have tried many different formats of xlst stylesheets, but none seem to be working.
pasting the two xslts below:
*<?xml version="1.0" encoding="UTF-8" ?>*
*<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">*
*<xsl:output method="html"/>*
*<xsl:template match="/">*
*<xsl:apply-templates/>*
*</xsl:template>*
*<html>*
*<body>*
*<xsl:template match="session">*
*<session><xsl:apply-templates/></session>*
*</xsl:template>*
*<xsl:template match="entity name">*
*<entity-name align="center"><xsl:apply-templates/></entity-name>*
*</xsl:template>*
*<xsl:template match="instance label">*
*<instance-label align="center"><xsl:apply-templates/></instance-label>*
*</xsl:template>*
*<xsl:template match="attribute id">*
*<attribute-id><xsl:apply-templates/></attribute-id>*
*</xsl:template>*
*<xsl:template match="date-val">*
*<date-val><xsl:apply-templates/></date-val>*
*</xsl:template>*
*<xsl:template match="text-val">*
*<text-val><xsl:apply-templates/></text-val>*
*</xsl:template>*
*<xsl:template match="unknown-val">*
*<unknown-val><xsl:apply-templates/></unknown-val>*
*</html>*
*</body>*
*</xsl:template>*
*</xsl:stylesheet>*
and
*<?xml version="1.0" encoding="UTF-8" ?>*
*<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">*
*<xsl:output method="html"/>*
*<xsl:template match="/">*
*<html>*
*<body>*
*<xsl:template match="session">*
*<session><xsl:apply-templates/></session>*
*</xsl:template>*
*<enityName>*
*<xsl:for-each select="entity name">*
*<instancelabel>*
*<xsl:for-each select="instance label">*
*<attribute-id>*
*<xsl:for-each select="attribute id">*
*<text-val>*
*<xsl:value-of select="text-val"/>*
*</text-val>*
*<date-val>*
*<xsl:value-of select="date-val"/>*
*</date-val>*
*</xsl:for-each>*
*</attribute-id>*
*</xsl:for-each>*
*</instancelabel>*
*</xsl:for-each>*
*</enityName>*
*</body>*
*</html>*
*</xsl:template>*
*</xsl:stylesheet>*
also pasting the source xml file I am trying to convert.
- <session xmlns="http://oracle.com/determinations/engine/relational/sessiondata/10.0" sessionDateTime="2010-12-17T11:34:08" locale="en-US" rulebase="Barclay_2910" rulebase-build="2010-12-17 06:04:02Z">
- <entity name="global">
- <instance label="global">
- <attribute id="S_Other_Type_of_Business1">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Nature_of_Business">
*<unknown-val />*
*</attribute>*
- <attribute id="N_Desired_Review_Period">
*<unknown-val />*
*</attribute>*
- <attribute id="S_I_Confirm">
*<unknown-val />*
*</attribute>*
- <attribute id="S_new_investors_ID_Vd">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Address">
*<unknown-val />*
*</attribute>*
- <attribute id="N_Total_Amount_of_Capital_Invested">
*<unknown-val />*
*</attribute>*
- <attribute id="S_State_Business_use_Trading_name1">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Correspondence_Postcode">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Country">
*<unknown-val />*
*</attribute>*
- <attribute id="S_BTA_Code1">
*<text-val>Central Government</text-val>*
*</attribute>*
- <attribute id="S_Correspondence_Address">
*<unknown-val />*
*</attribute>*
- <attribute id="N_Total_Amount_Capital_Invested_non_Corporate">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Business_Organisation">
*<unknown-val />*
*</attribute>*
- <attribute id="S_State_Business_use_Trading_name">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Business_Organisation1">
*<text-val>1</text-val>*
*</attribute>*
- <attribute id="S_Date_Established1">
*<date-val>2010-01-01</date-val>*
*</attribute>*
- <attribute id="S_Telephone_Number">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Date_of_Incorporation1">
*<uncertain-val />*
*</attribute>*
- <attribute id="S_Date_of_Incorporation">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Postcode">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Start_Up_Type_Non_Corporate">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Previous_registered_names">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Other_Investments_non_corporate">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Registered_Number">
*<unknown-val />*
*</attribute>*
- <attribute id="b8@Properties_PropBkACC_xsrc">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Registered_Number1">
*<text-val />*
*</attribute>*
- <attribute id="b6@Properties_PropBkACC_xsrc">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Business_use_Trading_name1">
*<text-val>Yes</text-val>*
*</attribute>*
- <attribute id="S_Registered_address_Main_Trading">
*<unknown-val />*
*</attribute>*
- <attribute id="S_select_the_high_risk_industry_operated1">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Start_Up_Type">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Priority1">
*<text-val>Standard</text-val>*
*</attribute>*
- <attribute id="S_Correspondence_address_same_Main_Trading">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Additional_Source_Capital">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Previous_Sort_Code">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Source_of_funds">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Choose_Start_Up1">
*<text-val>Start Up/New Entity/Businesses</text-val>*
*</attribute>*
- <attribute id="S_Registered_Country">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Fax_Number">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Contributer">
*<unknown-val />*
*</attribute>*
- <attribute id="S_business_organisations_annual_turnover1">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Previous_Account_number_Roll_Number">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Previous_registered_names1">
*<text-val />*
*</attribute>*
- <attribute id="b9@Rules_startuprule_doc">
*<unknown-val />*
*</attribute>*
- <attribute id="S_CIS_Record1">
*<text-val>Yes</text-val>*
*</attribute>*
- <attribute id="S_Employees_Members1">
*<text-val>1-9</text-val>*
*</attribute>*
- <attribute id="S_shareholders_Contributors">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Business_operate_high_risk_industry">
*<unknown-val />*
*</attribute>*
- <attribute id="b7@Properties_PropBkACC_xsrc">
*<unknown-val />*
*</attribute>*
- <attribute id="S_select_the_high_risk_industry_operated">
*<unknown-val />*
*</attribute>*
- <attribute id="S_business_organisations_annual_turnover">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Registered_Postcode">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Nature_of_Business1">
*<text-val />*
*</attribute>*
- <attribute id="S_Country_of_Incorporation1">
*<text-val>1</text-val>*
*</attribute>*
- <attribute id="N_issued_share_capital_company">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Correspondence_Country">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Type_of_Business1">
*<text-val>Sole Trader</text-val>*
*</attribute>*
- <attribute id="S_Web_Address">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Registration_Number1">
*<text-val />*
*</attribute>*
- <attribute id="S_Business_operate_high_risk_industry1">
*<text-val>Yes</text-val>*
*</attribute>*
- <attribute id="S_Additional_Source_Capital1">
*<unknown-val />*
*</attribute>*
- <attribute id="Source_of_funds_non_Corporate">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Country_of_Incorporation">
*<unknown-val />*
*</attribute>*
- <attribute id="S_if_registered_address">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Date_Established">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Registration_Number">
*<unknown-val />*
*</attribute>*
- <attribute id="S_ID_VD">
*<unknown-val />*
*</attribute>*
- <attribute id="S_I_confirm_form_287">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Other_Investments">
*<unknown-val />*
*</attribute>*
- <attribute id="S_I_Confirm1">
*<text-val>Yes</text-val>*
*</attribute>*
- <attribute id="S_Date_Form_Lodged">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Registered_Address">
*<unknown-val />*
*</attribute>*
- <attribute id="S_Other_Type_of_Business">
*<unknown-val />*
*</attribute>*
- <attribute id="N_start_up_capital_business">
*<unknown-val />*
*</attribute>*
- <attribute id="N_Approx_transferring_balance">
*<unknown-val />*
*</attribute>*
*</instance>*
*</entity>*
*</session>*
Edited by: Sagnik on Dec 21, 2010 12:06 AM -
OOTB workflow gives error when user rejects in the document in publishing a major version.
Hi All,
I am using OOTB workflow with little customization with following configuration
1. Allow content approval enabled
2. Configure a workflow with following general settings true
3. Start workflow on publish of Major version only is enabled
4. workflow has following configuration enabled.
Now, when user start publishing of major version and Starts the workflow. workflow starts without any problem.
But as and when the user rejects the document it is rejected with Reject status with "Approval Status" as well as workflow status which is expected.(This is correct )
But when i look at the workflow history i can see at last line there is an Error with
An error has occurred in In [Workflow Name].
Now when user check out and check in item again and try to publish with Major version again. it gives errors that the previous version is still running.
I have trace a lot and also test with original OOTB workflow itself. it is behaving the same.
As per my findings there is problem in "Completion condition of this task process" the end task process is not being executed correctly.
I tried to end the task process with End the task process action but it is still not working.
I need some help in this issue as users are facing problems in case of rejection. I hope some one has the solution for the same.
Two things i have noticed are
1. My MS office 2010 professional plus is expired as i was using trial version
2. I have made stop inheriting tasks permission and remove all default groups as i have settings in workflow "Only allow task reception and process owner to read and edit workflow task"
3. Earlier i had also installed "Sharepoint 2010 April 2012 updates". i had also observed that (installing Sharepoint 2010 April 2012 updates) before that if user has selected "Automatically rejects the document if any participant rejected". it ends
with "rejected" status. At present it remains in inprogress and not stops with rejected status.
Can any one give me a hint what should be the problem ? Is it a problem with latest Sharepoint 2010 April 2012 updates ?
Thanks,
S. M. MANIYARI have done following testing.
1. The server in which i have not installed sharepoint 2010 April 2012 updates the above scenario is working fine without any problem
2. I have also observed following logs of error in server where April 2012 updates is installed.
8/28/2012 03:51:41.33 w3wp.exe (0x0F08) 0x0A00 SharePoint Foundation
Workflow Infrastructure 88xr Unexpected WinWF Internal Error, terminating workflow Id# 8bf7fef1-c92e-4b22-a16f-480425d3adc6
08/28/2012 03:51:41.33 w3wp.exe (0x0F08) 0x0A00 SharePoint Foundation
Workflow Infrastructure 98d4 Unexpected System.InvalidOperationException:
CompositeActivity cannot transition to 'Closed' status when there are active child context still exist for child activity. at System.Workflow.ComponentModel.Activity.MarkClosed() at System.Workflow.ComponentModel.ActivityExecutionContext.CloseActivity()
at Microsoft.Office.Workflow.Actions.OfficeTask.FinalClose(Object sender, EventArgs eventArgs) at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
Following are last two lines of workflow history.
S. M. MANIYAR -
Error when selecting system during scheduling of background job in RAR
Hi,
I am getting an error when I attempt to schedule a background in RAR. It happens when I go to the multiple system selection option. I select a system and click copy. An error example below appears in the logs even when I dont go ahead and schedule the job. The job still runs and returns results when scheduled. However these errors in the logs concern me. Anybody else experience this?
Aug 4, 2010 4:12:32 PM com.virsa.cc.common.util.ExceptionUtil logError
SEVERE: NodeElement(.BatchRiskAnalysisSelection.RoleAnalysisInput.RoleAnalysisSystems): unknown attribute Sign
com.sap.tc.webdynpro.progmodel.context.ContextException: NodeElement(.BatchRiskAnalysisSelection.RoleAnalysisInput.RoleAnalysisSystems): unknown attribute Sign
at com.sap.tc.webdynpro.progmodel.context.NodeElement.wdGetAttributeInfo(NodeElement.java:374)
at com.sap.tc.webdynpro.progmodel.context.NodeElement.setAttributeValue(NodeElement.java:877)
at com.virsa.cc.common.GUIElement.copyAttributes(GUIElement.java:696)
at com.virsa.cc.common.GUIElement.copyNodeTree(GUIElement.java:792)
at com.virsa.cc.common.GUIElement.copyNodeTree(GUIElement.java:777)
at com.virsa.cc.common.ui.MultipleSelectionView.onActionCopy(MultipleSelectionView.java:187)
at com.virsa.cc.common.ui.wdp.InternalMultipleSelectionView.wdInvokeEventHandler(InternalMultipleSelectionView.java:259)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
Regards,
NiamhHi
Did you check the connector whether the background system is connecting or not.
Goto RAR-Configuration>connectors> select the connector of the background system and then press on test connection.
Regards
Hari
Maybe you are looking for
-
Satellite M100-126 - Win 7 32bit indicates "only" 3GB of usable memory
Hi, Here's the situation: I have a Toshiba satellite M100-126 (PSMA1E - 0PV021FR) running Windows 7 32bit. It originally had 2gigs of Ram, but after my brother's laptop broke down (motherboard failure) I took his 2x2gig ram and installed them in my l
-
Flash Player 9 fails to properly install
I have tried everything I know to get Flash9 to work. After uninstalling I restart my computer and install flash. It says it was installed but when I go back to Adobe site and test the player nothing except Shockwave comes up. I am using Netscape and
-
How to put simple labels on pictures
I want to simply label a photo with street names. In my humble opinion, this is something that Mac ought to be able to handle. I am not a graphic design expert and I do not expect to have to learn a lot of graphic design stuff to do that. Pages does
-
Referencing a substitution variable in data load rule header definition
Hi All, Im trying to add a substitution variable to the header definition of a DLR. the sub var is &CurrMonth. When I execute the data load I get an "unknown member error" with a list of all members in the header definition, including Oct which is my
-
Hi, I would really appreciate it if someone could take a few minutes out to try and explain in simple terms how to manage this business scenario: Legal Fees - will be billed every month, variable value: can be 100, 1000, etc. but never more than 2000