Configure a default database

I can login to sqlplus without connect string using oracle user, now I want to login to sqlplus without connect string using root, how do I configure it ?

You must not use the user root to get connection to Oracle.
Joel Pérez
http://otn.oracle.com/experts

Similar Messages

How will you find out no of standby databases configured for primary database from OS level

How can find the number of standby databases configured for primary database from os level

Check the alert log.
The Alert log will always have Data Guard messages in it.
Example
cd /u01/app/oracle/diag/rdbms/primary/PRIMARY/trace
tail -1700 alert_PRIMARY.log | more
Wed Nov 13 13:35:26 2013
ARC7: Standby redo logfile selected for thread 1 sequence 1164 for destination LOG_ARCHIVE_DEST_2
LNS: Standby redo logfile selected for thread 1 sequence 1165 for destination LOG_ARCHIVE_DEST_2
If you don't see messages like this it's probably not a Data Guard system.
Or search it for :
System parameters with non-default values:
Which on Data Guard system will show things like:
log_archive_dest_1 = "LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PRIMARY"
log_archive_dest_2 = "SERVICE=STANDBY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STANDBY"
log_archive_dest_state_1 = "ENABLE"
log_archive_dest_state_2 = "ENABLE"
fal_server = "STANDBY"
Best Regards
mseberg

Error: The number of configured copies for database 'DB-1' (1) is less than the required redundancy count (2).

Hello , I think the below event alert 4113 is very common and is due to that only one database copy is present in DAG but is there any way we can stop this alert for the
specific database.
The message tells that there is only one copy of the database - create another copy and the warning message will go away but
we do not want to create another copy. So is there any way we can stop this event getting generated.
Database redundancy health check failed.
Database copy: DB-1
Redundancy count: 1
Error: The number of configured copies for database 'DB-1' (1) is less than the required redundancy count (2).
Name                 Status RealCopyQueu InspectorQue ReplayQueue      CIState
                                       e
ue
DB-1\       Mounted            0            0            0
Healthy
MAILSRV2
===============
Full Status
===============
Identity                         : DB-1\MAILSRV2
Name                             : DB-1\MAILSRV2
DatabaseName                     : DB-1
Status                           : Mounted
MailboxServer                    : MAILSRV2
ActiveDatabaseCopy               : MAILSRV2
ActivationSuspended              : False
ActionInitiator                  : Unknown
ErrorMessage                     :
ErrorEventId                     :
ExtendedErrorInfo                :
SuspendComment                   :
SinglePageRestore                : 0
ContentIndexState                : Healthy
ContentIndexErrorMessage         :
CopyQueueLength                  : 0
ReplayQueueLength                : 0
LatestAvailableLogTime           :
LastCopyNotificationedLogTime    :
LastCopiedLogTime                :
LastInspectedLogTime             :
LastReplayedLogTime              :
LastLogGenerated                 : 0
LastLogCopyNotified              : 0
LastLogCopied                    : 0
LastLogInspected                 : 0
LastLogReplayed                  : 0
LogsReplayedSinceInstanceStart   : 0
LogsCopiedSinceInstanceStart     : 0
LatestFullBackupTime             :
LatestIncrementalBackupTime      :
LatestDifferentialBackupTime     :
LatestCopyBackupTime             :
SnapshotBackup                   :
SnapshotLatestFullBackup         :
SnapshotLatestIncrementalBackup :
SnapshotLatestDifferentialBackup :
SnapshotLatestCopyBackup         :
LogReplayQueueIncreasing         : False
LogCopyQueueIncreasing           : False
OutstandingDumpsterRequests      : {}
OutgoingConnections              :
IncomingLogCopyingNetwork        :
SeedingNetwork                   :
ActiveCopy                       : True
Thanks

That regex looks odd to me. I assume you have databases with names like "Mailbox Database <ten digit number>" (standard Exchange default name, in other words), "ABC-DB" and "HOME-DB". If this is the case, wouldn't
you want "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"? THis works if I run it from a prompt:
[PS] C:\Scripts>"Mailbox Database 0123456789" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"Mailbox Database 123456789" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"Mailbox Database 12345678910" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"HOME-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"ABC-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"ABCD-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"HOM-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
I find it's easiest to test RegEx's from the prompt this way. If the above isn't your goal, let us know, and we'll see if we can come up with something better.

MSSQL Homogeneous System Copy : SAPINST cannot connect to default database

Hello.
We want to perform a homogeneous system copy, following Note 151603.
We have attached the source DB (RP1) to the destination DB (RD4) following the above mentioned Note.
Now, logged to the server as DOMAIN\rd4adm , we want to execute the SAPINST, as indicated in the Note 683447, but when giving the password for user rd4adm we get a pop up
Cannot connect to R3SVIL\RD4 [SQL Server]Cannot open user default database. Login failed.
R3SVIL is the server. Login is done with windows authentication (connected as domain\rd4adm)
We cannot find a Note descibing this issue and how to fix it, must be something with user : does anybody have suggestion or solution?
Thanks a lot,
Dino

Hi,
did you apply SAP note 551915 - R/3 won't start after database restore or database copy
also check Note 806925 - SQL Error 4064: Cannot open user default database
regards,
kaushal

Standby database not configure while keep database files in different place

Dear Friends ,
I have to successfully configured "PHYSICAL STANDBY DATABASE" within the TWO databases ("PRIM" and "STAN" Database) when I kept datafile, controlfile and redolog files in the same location (like, "/u01/app/oracle/oradata/prim" location .
In this successful configuration , I have to add the below two lines into the initprim.ora and initstan.ora both server respectively ...
initprim.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/stan','/u01/app/oracle/oradata/prim'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/stan','/u01/app/oracle/flash_recovery_area/prim'
initstan.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/prim','/u01/app/oracle/oradata/stan'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/prim','/u01/app/oracle/flash_recovery_area/stan'Now , in second scenario , I have to change Primary database server's datafile, controlfile and redolog file in the below folder :
controlfile --> "/u01/app/oracle/oradata/prim/ctrlfile"
redologfile --> "/u01/app/oracle/oradata/prim/redofile"
datafile --> "/u01/app/oracle/oradata/prim/datafile"
Similarly I have to create same folder in my STAN database server accordingly . and also add the above lines in same way :
initprim.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/stan','/u01/app/oracle/oradata/prim'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/stan','/u01/app/oracle/flash_recovery_area/prim'
initstan.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/prim','/u01/app/oracle/oradata/stan'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/prim','/u01/app/oracle/flash_recovery_area/stan'Keeping the above situation when I run the below command in STAN database server :
[oracle@test ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 15 23:15:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup mount
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1220772 bytes
Variable Size 163581788 bytes
Database Buffers 427819008 bytes
Redo Buffers 7163904 bytes
Database mounted.
SQL> alter database recover managed standby database disconnect from session;
Database altered.
The Command execute successfully but in the alert log of the STAN database server ,I get the below error :
Completed: alter database recover managed standby database disconnect from session
Mon Nov 15 22:46:52 2010
Clearing online redo logfile 1 complete
Mon Nov 15 22:46:52 2010
Errors in file /u01/app/oracle/admin/stan/bdump/stan_mrp0_3695.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/prim/redofile/redo02.log'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Nov 15 22:46:52 2010
Errors in file /u01/app/oracle/admin/stan/bdump/stan_mrp0_3695.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/prim/redofile/redo02.log'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3But I already created the above mention folder "'/u01/app/oracle/oradata/prim/redofile" successfully and the redo log files are also created there successfully , but I cannot understand why this error is showed ? And also no archivelogs are shifted from PRIM database server to STAN database server .
Would u plz suggest me , why I cannot configure Physical Standby Database when I keep my database fles in the separate location ?
help me plz ... ...

Hi,
I'm missing the steps you took renaming/moving the files on the primary.
Since the location of datafiles is stored in the control file the controlfile of the standby might not know the new location yet.
I suggest you read this http://www.cs.bris.ac.uk/maintain/OracleDocs/server.816/a76995/standby.htm#23603 and see if that helps
Success,
FJFranken

Trying to get the default database connection

I'm trying to use the default database connection that the application server has but when I call this method I get an error :
Connection conn = (new oracle.jdbc.driver.OracleDriver()).defaultConnection();
java.sql.SQLException: Invalid Oracle URL specified
Do I have to do some setup? I don't want to hard code the connection URL in my code.
Thanks,
Merced

Hi Avi,
Thank you so much. I added the following and I was able to get the connection:
Context ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("jdbc/DBConnection1CoreDS");
Connection c = ds.getConnection();
Currently I'm running it from JDeveloper and the data-source.xml gets generated automatically. How will it work when I deploy this application to the Oracle Application server? Do I have to update or copy data-source.xml? What does "jdbc/DBConnection1CoreDS" mean? I only know that in data-source.xml I have location="jdbc/DBConnection1CoreDS". I don't understand how Context is able to find this. I also deleted this entry from data-souce.xml but it got generated again. I don't understand that either.
Your help is appreciated.
Thanks,
Merced

Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
When i login i get the following message:
The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
I checked the following:
I am a administrative user in SCCM (Full Administrator)
I am a member of the administrator group on the server
Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
I tried to start it on multiple workstations and deleted my roaming profile
Any more suggestions?

Hi,
Maybe you could have a look on the below blog.
http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information
may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Golden Gate configuration with 12c Database

Hi,
I have a requirement to configure the golden gate with oracle database 12c with container database.
Versions:
Golden Gate - 12.1.2.1.0
Oracle Database - 12.1.0.2
Here we need to configure with container database and two pluggable database.
Kindly suggest me the steps for configuration.
Regards
Kumar

Hello Kumar,
I think you need to do the same setup as other GG versións :
1. Install Golden Gate software on extract/replicat sites
2. Create GG User with the necesary privs.
3. Set Min Logging level at database level.
4. Set TRANDATA for the tables that you like capture changes
After, you need analyze the objects that you need replicate and define the capture process.
To use GG on a MultiTenant Database, you need define at extract level the PDBs and the objects that you need extract. Remeber that in a Multi-tenant enviorment, only a set of redo logs exists,then the capture process is Multi-Tenant aware, because allow
set the PDB and the schema and the objects that you like capture. It is called qualified three-part name, PDB.SCHEMA.TABLE
Example:
SOURCECATALOG FINANCE TABLE SAP.*; ---> Source is the way to inlcude the PDB
TABLE REPORTS.*;
SOURCECATALOG HR TABLE SIEBEL.*;
TABLE REPORTS.*;
SOURCECATALOG MFG
TABLE CUSTOMER.ORDERS;
TABLE REPORTS.*;
TABLE HQ.LOCATIONS.*;
In this example, Extract captures the following:
All tables in the SAP and REPORTS schemas in the FINANCE PDB.
All tables in the SIEBEL and REPORTS schemas in the HR PDB.
All tables in the CUSTOMER and REPORTS schemas in the MFG PDB.
For the last TABLE statement, Extract captures all tables in the LOCATIONS schema in the HQ PDB. This statement is a fully qualified three-part name and overrides the previous SOURCECATALOG specification.
You have more info at : http://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters147.htm
Also, you have a dedicated chapter of using GG in a Multi-Tenant env at: https://docs.oracle.com/goldengate/1212/gg-winux/GIORA/config_containerdb.htm#BDCFDFDE
I hope help.
Regards
Arturo

Configuration assistant "Oracle Database Configuration Assistant" failed

I install oracle 10g on HP UX 11.23. I got this error :
hecking for PHSS_33278; found Not found.     Failed <<<<
Checking for PHSS_33279; found Not found.     Failed <<<<
Checking for PHSS_33277; found Not found.     Failed <<<<
Checking for PHSS_33279; found Not found.     Failed <<<<
, my first question :
can i pass this step, ?
after all, my installation form is okey, but everything change become nightmare.
I installation failed on Configuration Assistant :
Configuration assistant "Oracle Database Configuration Assistant" failed
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.
1. check the details panel on the configuration assistant screen to see the error resulting in the failures
2. fix the errors causing these failures
3. select the failed assistants and click the retry button to retry the
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

But i still get this error. Do you have solution for this ?
I installation failed on Configuration Assistant :+
Configuration assistant "Oracle Database Configuration Assistant" failed+
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.+
*1. check the details panel on the configuration assistant screen to see the error resulting in the failures*
*2. fix the errors causing these failures*
*3. select the failed assistants and click the retry button to retry the*
Configuration assistant "Oracle Database Configuration Assistant" failed The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------+
Edited by: user9198604 on Feb 25, 2010 3:37 AM

How to set default database selection in forms 11g

Hello,
In the past (Forms 10g), we could set the default database by setting userid=@dbname in formsweb.cfg.
We have migrated to Forms 11g.
When we set this parameter, we have the message ORA-01017 Invalid Username but the dbname is well set in the connection windows.
Unfortunately, it generates an error message.
How can we set the default database setting in forms 11g?
Thanks in advance for your answer.

If the middle tier platform is Windows set LOCAL to the db name in the Forms default.env. If the platform is Unix based, set TWO_TASK to the db name in the default.env. This will not prefill the db name field, but with this in place that field can be left empty. Alternatively, you need to create your own custom logon dialog.
Example:
LOCAL=dbname
Or on Unix
TWO_TASK=dbname
Edited by: Michael Ferrante (Oracle) on Aug 7, 2012 12:05 PM

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

How I configure a default value in an entity object?

Hi,
1:how I configure a default value in an entity object?
attribute type: DATE
I want to set the current date
...thanks

Override the create() action in your entity object implementation:
protected void create(AttributeList attributeList)
* This method should be subclassed to supply programmatic default values to
* various attributes of a new Entity Object. For example, to create a sequence.
* Instances of subclasses should call super.create() before performing any operations.
System.out.println("create(AttributeList attributeList) - start");
Date datSysdate = ( oracle.jbo.domain.Date) Date.getCurrentDate();
super.create(attributeList);
// set the default to today...
setHiredate( datSysdate );
System.out.println("create(AttributeList attributeList) - end");
}

Is it possible to configure non-default NX7K CoS-DSCP map?

NX7K QoS has system defined table maps for CoS to DSCP mapping, DSCP to CoS mapping, etc. Those table maps can be used in qos policy maps. I was wondering if I can change, for example, CoS to DSCP mapping to something different from the default values.
Somthing similar to Catalyst switch command "mls qos map cos-dscp 0 10 18 24 34 46 48 56", where you can define any CoS to DSCP values. I don't think this is possible in NX7K QoS, but just curious.
Thanks
Gary

Hi Raymond,
Based on my research, we can use Group Policy and Internet Options to configure default mail client.
How to make Outlook the default mail client
http://support.microsoft.com/kb/223877/en-us
How to configure the default e-mail client using Group Policy
http://support.microsoft.com/kb/2008044
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

EM console HA page says "Data Gaurd not configured for this database"

I am attempting to use EM console's "High Availability Console" to create a standby database, but, the option is not available. Under "Data Gaurd Summary" the page shows "Oracle DataGaurd is not configured on this database."
How do I configure this option so that I can use the console to create Standy databases? I have looked everywhere I can think of and cannot find any instructions!

Click on your database name, and you'll be lead to a page which shows you all the statistics of your Db
Click on the "Availability" Sub Tab.
You'll see the option to "Add Standby Database". You can take it from there. (you'll be prompted to log in to your database -- log in with sys)
Now click on "Add Standby Database"
The process I normally follow is this
1. RMAN your primary
2. Create standby control file from primary.
3. Get your init file from primary
4. Copy everything over.
5. Make the init file changes (fal client, fal server on primary, any kind of directory mapping, point the init file to the standby control file on the standby side)
6. Bring up the standby db (doing all the other changes that are required)
Then you can import that Db into OEM,
or you could just use the Wizard from OEM :)

Cannot enable broker configuration or showing database information

- I add the primary database and standby database into broker configuration :
DGMGRL> show configuration
Configuration - DGConfig1
Protection Mode: MaxPerformance
Databases:
TEST_PRI - Primary database
TEST_STD - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
- And enable configuration
DGMGRL> enable configuration;
Enabled.
- And show configuration again
DGMGRL> show configuration;
Configuration - DGConfig1
Protection Mode: MaxPerformance
Databases:
TEST_PRI - Primary database
TEST_STD - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
- But, when i show the database information
DGMGRL> show database TEST_PRI
Object "test_pri" was not found
- I notice that the "ENABLE" notation is not show up in the broker configuration, like this
DGMGRL> show configuration
Configuration
Name: DGConfig1
Enabled: YES <<<--------------------
Protection Mode: MaxPerformance
Databases:
pc00prmy - Primary database
pc00sby1 - Physical standby database
Fast-Start Failover: DISABLED
Current status for "DGConfig1":
SUCCESS
---- Why my configuration does note have the notation : "Enabled : YES/NO" ???
---- And in the configuration, it list databases (pri and stdby), but why i can not use "show database TEST_PRI/TEST_STD"
Please help
So thanks
Ch

Hello;
You show :
show database TEST_PRI
I think it need to be :
show database 'TEST_PRI'
Additional examples :
DGMGRL> SHOW DATABASE 'TEST_PRI' 'StatusReport';
DGMGRL> SHOW DATABASE 'TEST_PRI' 'LogXptStatus';
DGMGRL> SHOW DATABASE 'TEST_PRI' 'InconsistentProperties';
DGMGRL> SHOW DATABASE 'TEST_PRI' 'InconsistentLogXptProps';
Best Regards
mseberg

Configure a default database

Similar Messages

Maybe you are looking for