Configure Distribution.error
When I try to configure distribution for replication, I get an error stating that it cant connect to local host and that I need to connect using the computer name. The thing is, I am ALREADY connecting using the computer name!
SQL was installed, and then the computer name was changed. It now wants me to connect using the old name, but that is not valid any more. I have tried to go into all the SQL setup areas that I can find, but they all reference the new, correct,
server name. Not sure why SQL is hung up on the old name or where to fix this. Any / all help is appreciated!
Olaf is correct. Did you run the procedures in the document Olaf provided?
After the computer is renamed, for a default instance of SQL Server:
sp_dropserver <old_name>;
GO
sp_addserver <new_name>, local;
GO
For a named instance of SQL Server:
sp_dropserver <old_name\instancename>;
GO
sp_addserver <new_name\instancename>, local;
GO
That should clear things up.
Brandon Williams (blog |
linkedin)
Similar Messages
-
Need to get distribution errors in SAP Inbox
Hi Experts,
Please guide me where we can configure to get distribution errors to SAP Inbox of particular mail id.Thanks for your help.
Regards,
SivaHi. Have you checked IMG Path?:
EHS -> Product Safety -> Report Shipping -> Basic Settings -> Assign Recipient for Error Handling -
CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error
I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html>I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html> -
Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
MadhuHi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure -
OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB
I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfullyWhenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin -
How to configure custom error page in WebServer 6.1 if instance is down
Hi ,
I have deployed an application on port 82.
If the instance is down, want to configure custom error page in Sun One Webserver 6.1 so that the it displays a customised message rather than browser displaying its custom DNS error page.
In web.xml, configured the 404/500 error messages, but if the instance is down, my web application does not receive the request. So it should be defined at the root level.Where to configure the same?
Thanks for the help in advance.You can use Error function "send-error" http://docs.sun.com/source/817-1834-10/crobjsaf.html#wp20007
It has an example
Error fn=send-error code=401 path=/sun/server61/docs/errors/401.html -
How to configure a error queue for weblogic jms topic
Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
MingzhuangMingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj -
Configuration Check Error in Managed System Configuration
Hi dear experts,
I come across a problem as the screenshot shows blew:
I check some relevant information, but no issues found:
1.
DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
saphostexec running (pid = 7094)
sapstartsrv running (pid = 7097)
10:46:34 24.06.2014 LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 7130)
DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
SAPSYSTEMNAME = SAP
SAPSYSTEM = 99
service/porttypes = SAPHostControl SAPOscol SAPCCMS
DIR_LIBRARY = /usr/sap/hostctrl/exe
DIR_EXECUTABLE = /usr/sap/hostctrl/exe
DIR_PROFILE = /usr/sap/hostctrl/exe
DIR_GLOBAL = /usr/sap/hostctrl/exe
DIR_INSTANCE = /usr/sap/hostctrl/exe
DIR_HOME = /usr/sap/hostctrl/work
service/admin_users = daaadm
service/logfile_000 = /tmp/s
service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
And the version of hostagent is up-to-date.
2.The URL
- http://<SMDhost>:1128/SAPOscol/?wsdl
- http://<SMDhost>:1128/SAPHostControl/?wsdl
can be accessed.
3.The step 3 in managed systems configuration is executed successfully.
4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
Now I have no idea how to proceed, please give me some advice, thank you in advance.
Best Regards,
Pany PanHi Pany
Kindly check the below two sapnote
1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
Moreover , you need to check/verify/maintain the parameter in configtool
ThreadManager -> MaxThreadCount
Total number of Diagnostics Agents * 2 + 50
1250
ThreadManager -> InitialThreadCount
Total number of Diagnostics Agents * 1.5
900
ThreadManager -> MinThreadCount
Total number of Diagnostics Agents
600
ConnectionManipulator -> maxSoTimeOutConnections
Total number of Diagnostics Agents * 1.35
810
ConnectionManipulator -> MaxParallelUsers
Total number of Diagnostics Agents + 50
650
In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki
guide check the section Required Solution Manager Java Stack Settings (Scalability)
I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
minthreadcount , maxSoTimeOutConnections.
With Regards
Ashutosh Chaturvedi -
Incorrect distribution -Error while distributing GOA to R3 Backend system
Hi,
We have installed SRM server 5.5 and implementing contract Management
scenario with backend system R/3 4.6B.
In this scenario we are creating a Global Outline Agreement in SRM
system and distributing it to the back-end ERP system.
In SRM5.0 GOA (Trans.type GCTR) that are distributed at Header level
are failing to distribute to R/3 system v4.6b
We are getting this error message in SRM transaction SLG1: -
The error ocurred by processing event RELEASED_NEWLY with GUID
DCA7101B320134F1949F000347DE470F and object_id= 5600000054 " RECEPIENT
NOT FOUND"
The purchasing org , the plant has been mapped .Also vendor & material is maintained for the company & Plant .
The condition types are mapped in SRM
Pls suggest.
Regards,
AvinashHi Avinash,
In reference to your query about GOA, the distribution error might be beacause of the issues in BADI implementation.
By using the BADI you can define which document to be created in the backend.
BBP_CTR_BE_CREATE BADI can be used in SRM and BBP_CTR BADI can be used in back end R/3 for this purpose.
Check for the transaction types (GCTR) and the number ranges for the transaction types.
The GOA will either create a contract or a Scheduling agreement in R/3 back end after distribution.
Also refer the below SDN thread in this regard :
Re: Scheduling Agreement from GOA
Any further clarifications are welcome.
Award points for suitable answers.
Rgds,
Teja -
Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
RajHi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Cannot connect to the configuration database Error in HTTPS
Hi
We have a SharePoint 2010 farm ,with more then 20 web application running . I am getting "Cannot connect to the configuration database" error in one web application when we browse through https
The same application is working fine when we browse through http . I am using AAM i have 2 web server which is been network load balanced and the https traffic comes through F5
Kindly help to resolve the issue
PrabakarHI Prabakar,Check the below URL that exactly related to the issue.
http://expertsharepoint.blogspot.de/2014/05/cannot-connect-to-configuration-database.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Ewfmgr: Failed getting protected volume configuration with error 1
Hello,
I created a Windows 7-64 image for an Ivy-Bridge VME card. The image contains EWF with RAM-REG.
The disk was divided into 2 partitions with the windows installer and the image was successfully installed.
As I'm using RAM-REG, all
the disk was allocated.
After the image was installed I tried to run "ewfmgr c:" and got the current status.
Then I created a GHOST image and wrote the image on a new card with a clean disk.
After Windows booted, running "ewfmgr c:" gave:
Failed getting protected volume configuration with error 1
I found few threads on this issue but failed to understand what is the right solution.
Can you help ?
Thanks,
ZvikaThe Problem is always Volumeid related (diskid)
Explaination:
Sysprep creates new bcd for the System. - Therefore it's recommended to use sysprep (and SID and so on..) but if you're lazy or don't have Domain Controller and so on or always use physical seperated (better not Internet connected) machines you would be
totaly fine with non-syspreped Images. You only Need updated/new bcd.
Captured wim has 'old' bcd (if there is no seperated MSR Partition) you can update this 3 entries within winpe and your Image will boot:
bcdedit /store c:\boot\BCD /set {BOOTMGR} device boot
bcdedit /store c:\boot\BCD /set {DEFAULT} device PARTITION=C:
bcdedit /store c:\boot\BCD /set {DEFAULT} osdevice PARTITION=C:
(boot could also be Partition=c: or all entries could be boot - and /store is not needed as in winpe bcdedit automatically Redirects the commands into the other/System (found) bcd. But i always recommand to specify the bcd store you want to edit, like in
this lines)
The definition of "C:" in this Parameter is 'translated' into volumeid/diskid. - So in the bcd is not "C:" it's some DiskID.
Instead of the 3 entries you can just create a whole new bcd with updated volumeid/diskids. --> It would be enough to run bcdboot /s C:\ (or whatever the current boot (c:\) Partition is.
EWF needs to be reconfigured as it also works with Volume/Diskids. So it needs additional command while running (online).
ewfcfg /install-configuration for win7
rundll32 ewfdll.dll,ConfigureEwf for win xpe/wes2009.
Windows Embedded Developer and Scripting Guy //Germany (http://www.wesnext.com) -
STMS_QA distribution error
Hello,
We are facing an error with our Transsport system. The TR's are not showing up in the buffer list of our production system.
There were 6 TR to be imported in the production system. But before it gets into production, it has to have the approval in the quality systems. After having given the approval, only 3 TR's were showing up in the import buffer of the production.
The other three are facing a distribution error.
"User KANDIKON has no authorization for the tp command"
User KANDIKON has no authorization for the tp command SETACTIVE
Message no. TP607
Diagnosis
To execute the tp command SETACTIVE you need the administration authorization S_CTS_ADMIN in the Change and Transport System. It can be found in the authorization profile S_A.SYSTEM.
System Response
The function terminates.
Procedure
Contact your system administrator.
For more information on authorizations and authorization profile, see the online documentation on the CTS. "
The concern is how come for other TR there were no issues when the approver was the same.
Please suggest as to how to proceed further.
Thanks and Regards,
Ankit MishraYou should check whether that user has authorization for the object.
S_CTS_Admin is needed if you want to do STMS activity.
Regards, -
To configure Own Error page in Web Tier
Hi,
I am using jdev version 11.1.1.6.
We have a error page for the application that we built which we can show to the User if the application pages comes up with an error.
However if the Application itself is down.. We want to show the Users a error page.
For that we will have to configure an error page in the webserver (oracle web tier) so that even if the application is down,
thne user will get a better Error page rather than the 404 Error page .
I am new to webserver (oracle web tier) and dont know how to configure an error page that I put onto the webserver (oracle web tier).
Any help is appreciated..Thanks for ur reply, Timo
This will help me to handle the error at application level which actually we have done.
However We have to actually set up an error page or handle the error when the application as a whole is down, so that when the application is down we can show the error page to the users..
so was asking the method of configuring error page on Oracle Web Tier..
Edited by: Benson45 on Apr 15, 2013 1:02 PM -
Configuration Validation error when booking an Sales Order.
Hi,
Getting an error when booking an sales order ie; "Configuration Validation error".
We are upgrading from 11.5.8 to 12.1.1 and this issue is critical. Please provide your valuable suggestion and advice.
Thanks in advance,
AsifIt seems you use configurator. Is this happening in production or in some test instance?
If it is a test instance, when was it cloned from prod? Did you clone the configurator instance at the same time?
1) You should publish the configurator model from the configurator developer to this new instance.
2) Also, it is possible that the selections made during order entry earlier are not valid anymore due to ECO/BOM changes or due to configurator rule changes. Open the configuration, make any selections if necessary and then click ok.
This will repopulate the order lines then you should be able to book the order.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant
Maybe you are looking for
-
How can I view all my apple devices on icloud
How can I view or add to my icloud so I can see all my devices and locate them when missing?
-
HT4623 cannot activate my iPhone 5
Tried to restore my new iphone 5 from icloud restore from iphone 4s, but now my iphone 5 says "device unknown" and "contact http://service". Tried restoring to factory settings,but still does not allow me to restore... What can I do now?
-
How do I format 1D waveform array to output to intensity chart?
I've tried to modify the "Cont Acq&Graph Voltage-Int Clk.vi" example vi to output to an intensity chart. The problem is the chart only accepts a 2D array of input data, while the DAQmx vis are giving me a 1D array of waveform data. How do I fix this
-
Hi there. I´ve just bought five NFC Tags (through the Nokia NFC writer). I was looking forward to try them irl.. But what a disappointment.... Let me give you an example. I wrote a tag, making it send a text message for my wife, when i leave work,
-
In Yahoo email, how do I get the autofill to work in the address line?
When I use Google or Explorer, the autofill works fine but not in Firefox. When I start to send an email or forward one, and start to put in the address, a window used to pop up with several address possibilities, but not any more. Why and how do I f