Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.

Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
Raj

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

RDP session to 2012 R2 server comes up with "Not enough storage is available to complete this operation"

I've just set up two new servers in identical fashion which will be hyper-v hosts.
They both have Windows Server 2012 R2 Datacentre installed. 128GB of RAM and c:247GB free, d: 1.9TB free. Resources are not an issue.
Only role installed is Hyper-V on both.
I can RDP to one server without a problem but the other is complaining with the message above. The only option is to click OK and this exits the session. I can log in fine through the Drac card of the server.
I get terminalservices events 261, 1149, 40.
At this time I also get Desktop Window Manager event 9009 - The Desktop Window Manager exited with code (0xd00002fe).
The other strange issue which may or may not be relevant is when I enter task manager on the affected server, the User details tab has lots of entries (approx. 60) with no names and 0% CPU/Memory. This looks odd to me.
Any help gratefully received as I don't want to rebuild from scratch if it is a basic tweak setting somewhere.

Hi Sir,
What I understood from this error was thata RESTRICTED amount of MEMORY allocated for particular type of OS RESOURCE,
has got EXHAUSTED.<o:p></o:p>
<o:p> </o:p>
In both the cases above,
the resource type that was getting exhausted or causing other resources to be exhausted was a HANDLE. A Handle is an OS object used to get a reference of another object (like File, registry,
port etc.). It’s using these handles that a process will work with open files, read registry keys or work with a network port.<o:p></o:p>
<o:p> </o:p>
In both the above scenarios,
we saw a process (Non-Microsoft) consuming large amount of Handles. You can view the handles owned by different processes through
"Task Manager" in Windows. In the "Task Manager", under the Process tab you can add an additional column to display Handles information.
http://blogs.technet.com/b/abizerh/archive/2009/07/12/troubleshooting-the-error-not-enough-storage-is-available-to-complete-this-operation.aspx
>>Any help gratefully received as I don't want to rebuild from scratch if it is a basic tweak setting somewhere.
Instead of rebuilding , you may try to perform in-place upgrade .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Terminal Server User license file not found or User ID not matched.

Hi,
I recently went for the Process Runner, downloaded trial version and wanted to work with Ides system, but at the very first step the system throws the following error:
"Terminal Server User license file not found or User ID not matched.
and the details are as follows:
Process Runner 2008
Version : 4.20.10
Supported file version: 7.3
Current Framework: 2.0.50727.42
User Name: Demo User
Licensed To: Demo Company
Product Id : PR-ALL-DR-MTH-CU
Full Version : 4.20.10.9579
Current UserID : Administrator
License Type : Evaluation/Demo License
Evaluation Days : 1 of 30
Licensed Uses : 5 of 15
Expiration Date : 12/31/2011
COMPANY : Demo Company
MAX_ROWS : 30
MAX_THREADS : 3
USER : Demo User
Current Node Id : DAAB-AA43-58DB-00DB-4862
Max Instances Allowed : N/A
OS-Office culture info : en-US | en-US | en-US | en-US
C-Info : en-US
Computer : SAPSERVER
Current Domain : WORKGROUP
OS : Microsoft Windows NT 5.2.3790 Service Pack 1
AppPath : D:\Vijj downloaded\Process Runner
MyDocPath : C:\Documents and Settings\Administrator\My Documents\Innowera
Terminal Server User license file not found or User ID not matched.
Can anybody guide me please.
Thanks.

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Unable to save a downloaded movie.."not enough movie data available"

I downloaded the HD version of Sigur Ros - Heima from the Quicktime HD gallery page. Beautiful. I wanted to save it to view again later....the computer chugs, process bar crawls, and then stops saving with message "Unable to save movie..not enough movie data avilable"
I tried downloading and savinmg the 480p version on my laptop with no problem..it "flattenedf" it and saved and plays back no problem. (G4 PB, 1.25 ghz, 512 ram)
The computer having the problem is the one I turned on today for the first time, MacPro 2.67 ghz 5gb ram.
Any ideas why this will not save? the whole movie must be in RAM and should be able to be saved to disk in a flash...
thanks!
marten

That error says the same as the event log:
"Action start 11:49:28: CcmCheckFreeDiskSpace.
MSI (s) (38:F4) [11:49:28:274]: Product: Application Web Service -- There is not enough available disk space on to complete this operation. Installation requires at least 10MB free disk space.
There is not enough available disk space on to complete this operation. Installation requires at least 10MB free disk space.
Action ended 11:49:28: CcmCheckFreeDiskSpace. Return value 3.
Action ended 11:49:28: INSTALL. Return value 3."

CF MX7 server receiving error message: Not enough storage is available

Production server and test server are receiving the following error messsage java.io.IOException: Not enough storage is available to process this command.
The test server has a one user per day while production server has thousands. Message appears about 15 times per day.
Using MX 7.02 with load a load balancer to two windows servers with the code residing on filer system. This message began to appear a few weeks ago.
Any ideas?

Sounds like dodgy file system permissions. Does the error always occur in the same place in the code?
Could some files or directories have been recently copied onto the filer which might have taken their old permissions with them, so CF doesn't actually have permissions to them?
Perhaps refreshing the permissions at the top level of the webroot, and cascading them through to all children might be a place to start.
Adam

Unable to obtain dynamiclink server

Hello.
I'm using a windows 8 pc. I think its a 64bit, not sure. but anyways i installed adobe creative cloud. had trouble installing after effects due to internet and such. but eventually i got it downloaded then had trouble actually starting it. ran as administrator and that fixed it. today i tried doing a camera tracker and i got the message "unable to obtain dynamiclink server" and i'm really fustrated, ive dealt with so many issues lately ive almost had enough. Ive look on the forums for answers and saw none. Please help. and if any of you could tell me how i'm supposed to uninstall and reinstall after effects that would be great. cause when it wasn't working i uninstalled it and tried finding the files again that i through in the trash and from then ive had trouble. Point being i'm inexperianced and need assistance. In fact. after effects doesn't even show up in the control panel uninstall. so i'm somehow using it and its not even there...
Best regards, Kyle West
Message was edited by: Irishoffspring

Run the cleaner tool and then reinstall if you must:
http://www.adobe.com/support/contact/cscleanertool.html
Won't solve your issue, though, I can tell you that. As we've written like a gigazillion times on this forum, AE not being able to connect to external processes comes down to blockages from virus scanners or general issues with the operating system like specific TCP ports being unavailable due to network configuration and firewall settings. You need to straighten out that part.
Mylenium

Outlook is running to slow for terminal server users

All tried but no luck .thanks

Outlook is running to slow for terminal server users and very slow updating inbox. Can anyone suggest how can i increase speed for the users ?
Office 2013
exchange 2010
This topic first appeared in the Spiceworks Community

Unable to read Password Server response - socket error on socket

Hi,
I'm experiencing the following at the OD replica:
2014-06-03 12:13:06.424616 FET - 592.1446486 - Client: Python, UID: 93, EUID: 93, GID: 93, EGID: 93
2014-06-03 12:13:06.424616 FET - 592.1446486, Node: /LDAPv3/127.0.0.1, Module: AppleODClientPWS - unable to read Password Server response - socket error on socket fd 12: Resource temporarily unavailable (5205)
Any ideas are appreciated. Thank you in advance.

Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format.

Windows Server 2012 R2 Fax Service - Windows 7 Client "You do not have permissions to complete this operation. Contact your fax administrator for more assistance"

First I have tried all sorts of searches and and all I come up with is things related to Windows Server 2008.
1. I have Fax Service running on my 2012 R2 File and Print Server.
a. It can send faxes from the logged in domain user
b. It does not need to receive faxes because we have another machine for that
2. I have added the domain user I am using on the Windows 7 machine to the Accounts List in Fax Manager
3. I can not seem to find any logging saying that there is a security problem (Event Log, etc...)
Please point me in the correct direction as I need to have my staff use Print to Fax from our Practice Management Application.

Hi Shawn,
à
You do not have permissions to complete this operation. Contact your fax administrator for more assistance
From the error message, please check if share the Fax on the server. Meanwhile, please also check if assign
correct permissions in Security tab under Fax properties.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
1. Fax Sharing is enabled and can see the Shared Fax Printer on other machines.
2. At least 2 domain groups that the Windows 7 user is in are in the Security Section, set to be able to fax. One othem can manage fax.

Unable to complete this operation error

Hi,
I installed Firefox 4 and when I go to my HP printer properties and click on Printer Services I get "Unable to complete this Operation" error. If I uninstall Firefox it works fine. When I reinstall Firefox I get the same error. Any help would be appreciated because I would like to use Firefox.
Thanks,
Phil

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

HT1222 Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?

Every time I try to install an update for iTunes 11.0.2, I get an error message 103. Has anyone else had this problem and found a way to fix this?

I did it the .dmg way alone and has problems with itunes crashing. This is a better way to ensure that there is not anything left behind to cause issues.
You need to backup your computer then uninstall I-tunes and reinstall itunes.
Delete iTunes
Deleting iTunes is not recommended unless you know what you’re doing.
Launch Terminal from the UTILITIES within Applications
Type the following commands:
cd /Applications/
This brings you into the Applications directory, the next command deletes iTunes itself:
sudo rm -rf iTunes.app/
Enter the Administrator password to confirm
There is no warning or confirmation other than entering the admin password, iTunes will immediately be deleted, effectively uninstalling it from the Mac.
Deleting the iTunes application will NOT delete the ITUNES or music, and any purchases bought through iTunes will still remain tied to the Apple ID used to originally buy them.
You can download the newest version from Apple, and running their installer will bring iTunes back to life on your computer.
http://www.apple.com/itunes/download/

Bump VMware Server 1.0.7 Latest error --Not enough memory...

VMware Server Help Post
Platform:
Intel core 2 Duo E2168.
2G ram, but 1/2 just went missing. If this is causing my problems, the mind wobbles, yet it's easy to fix, yay!
Lots of harddrives! Lots of harddrive space.
gigabit eth.
Nvidia 7600GS 512MB
Highpoint raid card (soft) 132Gigs for VMs
Archlinux w/ 2.6.26.3-1 kernel
kernel-headers 2.6.25.8-1
History:
Four weeks ago--
Patched and installed VMware Server 1.0.5 on Archlinux with kernel 2.6.25... everything worked well. Bliss!
About 2 weeks ago--
Upgraded kernel to 2.6.26... time suck began.
Current status:
After banging on VMware and vmmon patch and source code for a while,
now have on kernel 2.6.26-arch--
VMware Server 1.0.7 with patch ...117d, modified as follows:
In .../vmmon-only/include/iocontrols.h
line 48 #define VMMON_VERSION (168 << 16 | 0) changed to:
line 48 #define VMMON_VERSION (138 << 16 | 0)
Patch reasoning [limited newb alert]:
Without 117d, vmmon fails to compile with error re: .nopage
With 117d, vmmon compiles and installs successfully but VMs
won't start with error re: expect version 138 got 168
With patch modified, now past the version error, but getting the error:
Not enough physical memory is available to power on this virtual machine.
To fix this problem, power off other virtual machines [No others on]
or adjust the additional memory settings to allow more virtual machine
memory to be swapped    [There's plenty of memory]
If you were able to power on this virtual machine on this host computer
in the past, try rebooting the host computer. Rebooting may allow you
to use slightly more host memory to run virtual machines. [Rebooting had no effect]
In log:
Failed to connect to vm: /mnt/VMs/Test Booger/Test Booger.vmx
vmdbPipe_Streams Couldn't read: OVL_STATUS_EOF
Error during launch: 11, The process exited with an error:
End of error message
Operation failed to change the VM to the expected power state.
Not enough physical memory is available to power on this virtual machine.
To fix this problem, power off other virtual machines [No others on]
or adjust the additional memory settings to allow more virtual machine
memory to be swapped    [There's plenty of memory]
If you were able to power on this virtual machine on this host computer
in the past, try rebooting the host computer. Rebooting may allow you
to use slightly more host memory to run virtual machines. [Rebooting had no effect]
There's plenty of memory and disk free space--
top -b >> top_out
top - 06:59:46 up 40 min, 0 users, load average: 0.02, 0.05, 0.03
Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.1%us, 0.5%sy, 0.0%ni, 97.2%id, 1.2%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1034920k total, 441944k used, 592976k free, 17604k buffers
Swap: 2000084k total, 0k used, 2000084k free, 227224k cached
df -ha
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 72G 44G 25G 65% /
/dev/sdc1 20G 12G 7.5G 61% /mnt/home2
/dev/mapper/hpt45x_dcafabbcai1
153G 21G 132G 14% /mnt/VMs
I reduced host memory settings to 408MB and guest to 256MB as a test. [No effect]
After the tests I've done, I don't believe this error really has anything to do with low memory.
I don't know whether this is a bug, a patch problem, or, or, or, or .....
And so I post.
What next?
thanx in advance.
Last edited by maxbally (2008-09-15 23:33:21)

Hi Mike,
Mike23 wrote:
Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please.  Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points! Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

WCF Error: The remote server returned an error: Not Found

I have a windows phone8 app that utilizes a azure WCF service. I added the Servicereference to my project,when i call the service method it executes fine but getting the following error after executing:
System.ServiceModel.CommunicationException: The remote server returned an error: Not Found
Here's the code where my error's occuring (the error occurs on the 2nd line of code within the method(the line that contains "_result =
public string EndSendMessage(System.IAsyncResult result) {
                object[] _args = new object[0];
                string _result = ((string)(base.EndInvoke("SendMessage", _args, result)));
                return _result;
Any idea why this is happening?
Thanks.

Hi Narendramacha,
It may be have more than one possibility reasons. Did you try the service URL in the phone/emulator Internet Explorer to be sure the url is accessible ? About this error, I found some solutions , please refer to :
1.maxStringContentLength: http://stackoverflow.com/a/5185678
2.FireWall: http://stackoverflow.com/a/15594388
Please try it. Any results, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

You do not have security permissions to complete this operation. Contact your administrator for more information.

Hi everyone,
I had a little trouble finding this on ony forums, so i decided to write it myself.
I have setup on my Windows server 2008 machine fax server manager. It is working well (recieving faxes and forwarding it through email)
It has been setup with a d-link external fax modem.
Everytime i try to connect my client computer (windows vista business 32 bit) to the fax server through windows keep getting " you do not have security permissions to complete this operation. Contact your administrator for more information."
I am having a little trouble getting around it as i am the system administrator and have all the rights to do this. I have also added extra to my account fax rights as i thorght, that could of been the problem. I have also added my account in the fax server manager, but that did not work as well.
Everything is set up on a domain and the server that is running fax service manager is on it aswell, not sure what could be the problem.
Thank you in advanced for your help

Hi,
Thanks for the post.
First, I would like to confirm if the issue occurs with the Domain Admins.
If so, please check if the relevant group policies are set appropriate.
To resolve this issue, make sure that the Network Service account and the Local Service account is added to the following policy settings on the domain controller:
·         Adjust memory quotas for a process
·         Generate security audits
·         Log on as a service
·         Replace a process level token
·         Log on as a batch job
To configure the policy settings for the Network Service account on the domain controller, follow these steps:
1.    Click Start, point to Administrative Tools, and then click Local Security Policy.
2.    Expand Local Policies, and then click User Rights Assignment.
The policy settings are displayed in the right pane.
3.    Double-click the policy setting that you want to add the Network Service account to.
4.    If the Network Service account and the Local service account is not in the list of users and groups that are assigned to that policy setting, click Add User or Group.
5.    In the Select User or Groups dialog box, type Network Service in the Enter the object names to select box, and then click OK.
6.    Verify that NETWORK SERVICE is displayed in the list of users and groups that are assigned to that policy setting, and then click OK.
7.    Add Local service the same way.
8.    Reboot the server.
Does it work?
If the problem continues, Please collect the MPSReport from Windows Server 2008.
1. Download proper MPS Report tool from the website below.
Microsoft Product Support Reports
http://www.microsoft.com/downloads/details.aspx?FamilyID=CEBF3C7C-7CA5-408F-88B7-F9C79B7306C0&displaylang=en
2. Double-click to run it, if requirement is not met, please follow the wizard to download and install them. After that, click Next, when the "Select the diagnostics you want to run" page appears, select "General", “Business Networks”, click Next.
3. After collecting all log files, choose "Save the results", choose a folder to save <Computername>MPSReports.cab file.
Use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the file and then give me the download address.
Hope this helps.

HT1689 I am unable to sync my Ipod touch due to not enough space ? I delet bunch of podcasts from my ipod still not downloading ? help pl.

im unable to sync my ipod touch due to not enough space ? even after i deleted bunch of podcasts from it ? help pl.

- When you deleted them did the requested amount of storage space decrease?
- Try resetting the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- When you look at the colored bargraph of storage usage on the iPod in iTunes how much is taken up by "other". If greater than about 3/4 GB then restoring from backup usually reduced the "other".

Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.

Similar Messages

Maybe you are looking for