Configure Samba Server as per note 680617
Hi,
I am installing Dialog Instance on Windows. CI(ERP 6.0) and DB(Oracle) are in Unix.
As per note 680617INST APPl. Server in Heterogenous SAP System Environment, I am configuring Samba Server.
in that note it has been mentioned as :-
<b>On Unix, release the /usr/sap directory as SAPMNT. ( using SAMBA)</b>
<i>--> is this to be achieved in writing in config file
of samba .. if yes where ? need details. </i>
<b>The user who is performing installation on the windows host as well as the <sapsid>adm and SAPService<SAPSID> Windows users created during the installation must have read and write authorization on this share directory and its subdirectories.</b>
<i>--> How to achieve this. what we should do on the
Unix side ?</i>
My Best Regards
Paguras
Message was edited by:
PAGURAS to add more clarity to the Question
Paguras,
Look for a file called smb.conf......../etc/samba is where i would look for it......................
More details on samba config here............
Samba uses /etc/samba/smb.conf as its configuration file. If you change this configuration file, the changes will not take effect until you restart the Samba daemon with the command service smb restart.
The default configuration file (smb.conf) in Red Hat Linux 8.0 allows users to view their Linux home directories as a Samba share on the Windows machine after they log in using the same username and password. It also shares any printers configured for the Red Hat Linux system as Samba shared printers. In other words, you can attach a printer to your Red Hat Linux system and print to it from the Windows machines on your network.
To specify the Windows workgroup and description string, edit the following lines in your smb.conf file:
workgroup = WORKGROUPNAME
server string = BRIEF COMMENT ABOUT SERVER
Replace WORKGROUPNAME with the name of the Windows workgroup to which this machine should belong. The BRIEF COMMENT ABOUT SERVER is optional and will be the Windows comment about the Samba system.
To create a Samba share directory on your Linux system, add the following section to your smb.conf file (after modifying it to reflect your needs and your system):
[sharename]
comment = Insert a comment here
path = /home/share/
valid users = tfox carole
public = no
writable = yes
printable = no
create mask = 0765
The above example allows the users tfox and carole to read and write to the directory /home/share, on the Samba server, from a Samba client.
Samba Passwords
In Red Hat Linux 8.0 encrypted passwords are enabled by default because it is more secure. If encrypted passwords are not used, plain text passwords are used, which can be intercepted by someone using a network packet sniffer. It is recommended that encrypted passwords be used.
The Microsoft SMB Protocol originally used plaintext passwords. However, Windows 2000 and Windows NT 4.0 with Service Pack 3 or higher require encrypted Samba passwords. To use Samba between a Red Hat Linux system and a system with Windows 2000 or Windows NT 4.0 Service Pack 3 or higher, you can either edit your Windows registry to use plaintext passwords or configure Samba on your Linux system to use encrypted passwords. If you choose to modify your registry, you must do so for all your Windows NT or 2000 machines this is risky and may cause further conflicts.
To configure Samba on your Red Hat Linux system to use encrypted passwords, follow these steps:
1.
Create a separate password file for Samba. To create one based on your existing /etc/passwd file, at a shell prompt, type the following command:
cat /etc/passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
If the system uses NIS, type the following command:
ypcat passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
The mksmbpasswd.sh script is installed in your /usr/bin directory with the samba package.
2.
Change the permissions of the Samba password file so that only root has read and write permissions:
chmod 600 /etc/samba/smbpasswd
3.
The script does not copy user passwords to the new file. To set each Samba user's password, use the command (replace username with each user's username):
smbpasswd username
A Samba user account will not be active until a Samba password is set for it.
4.
Encrypted passwords must be enabled in the Samba configuration file. In the file smb.conf, verify that the following lines are not commented out:
encrypt password = yes
smb passwd file = /etc/samba/smbpasswd
5.
Make sure the smb service is started by typing the command service smb restart at a shell prompt.
6.
If you want the smb service to start automatically, use ntsysv, chkconfig, or Services Configuration Tool to enable it at runtime. Refer to Chapter 13 for details.
Tip Tip
Read /usr/share/doc/samba-<version>/docs/htmldocs/ENCRYPTION.html to learn more about encrypted passwords. (replace <version> with the version number of Samba that you have installed).
The pam_smbpass PAM module can be used to sync users' Samba passwords with their system passwords when the passwd command is used. If a user invokes the passwd command, the password he uses to log in to the Red Hat Linux system as well as the password he must provide to connect to a Samba share are changed.
To enable this feature, add the following line to /etc/pam.d/system-auth below the pam_cracklib.so invocation:
password required /lib/security/pam_smbpass.so nullok use_authtok try_first_pass
Hope that helps
Ravi Raman
Similar Messages
-
Map linux shared folders to Z drive in Windows Client. Unable to login through Samba Server
Hi,
I am trying to map my linux machine to a network drive Z in Windows 7 . I added user guid in smbusers and created a password for this user through smbpasswd . Started Samba server on linuc, but when trying to create a network drive, it is asking for the login. I used credentials as GUID/<CREATEDPWD> . Not able to login with these credentials. Am I missing something. My Domain is ORADEV. I attached related files smb.conf,lmhosts,smbusers files. Please let me know if i am not configuring samba server correctly.
Here is the sm.conf file Details :
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = ORADEV
# server string is the equivalent of the NT Description field
server string = %L (ST Samba Host), RedHat AS %v
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# printcap name = /etc/printcap
# load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
# printing = lprng
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
guest account = adoddi
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 0
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = server
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
password server = *
password server =Samba Server
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following is needed to keep smbclient from spouting spurious errors
# when Samba is built with support for SSL.
; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# This parameter will control whether or not Samba should obey PAM's
# account and session management directives. The default behavior is
# to use PAM for clear text authentication only and to ignore any
# account or session management. Note that Samba always ignores PAM
# for authentication in the case of encrypt passwords = yes
; obey pam restrictions = yes
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = no
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = no
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
wins server = 130.35.62.34
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
[ade]
comment = ADE Directory
path = /ade_global/
public = no
writable = yes
[homes]
comment = Home Directories (UNIX Home Dirs auto_home)
browseable = no
writable = yes
valid users = %S
create mode = 0664
directory mode = 0775
# If you want users samba doesn't recognize to be mapped to a guest user
map to guest = bad user
security = user
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
#[printers]
# comment = All Printers
# path = /var/spool/samba
# browseable = no
# Set public = yes to allow user 'guest account' to print
# guest ok = no
# writable = no
# printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space on %L
path = /tmp
read only = no
public = yes
# This is for the /private dir
[private]
comment = /private file space on %L
path = /private
read only = no
public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /home/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
[public]
path =: /usr/somewhere/else/public
public = yes
only guest = yes
writable = yes
printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
Here is the smbusers file : adoddi is my GUID
# Unix_name = SMB_name1 SMB_name2 ...
root = administrator admin
nobody = guest pcguest smbguest
adoddi = adoddi
lcmHosts File :
127.0.0.1 localhostHi,
To clarify a couple of things:
1- "reverse-route" does not have anything to do with this issue, the problem relies on the Windows 7 machine.
2- Do you connect with an Admin account (Windows admin)?
3- Do you run the VPN client as an administrator?
4- Have you tried to disable any AV or software protection on the machine (just for testing).?
Let me know.
Portu.
Please rate any helpul posts
Message was edited by: Javier Portuguez -
I have successfully to installed the RDS 2012 Server R2 per user CAL (5pcs) Open License after is found not allow over two users to remote desktop connection on this Server problem, I try to uninstall the license and then (internet on-line & telephone
call Microsoft Activate Center get the activate key) to reinstall is still same of the result on below problem.
Select a user disconnect so that you can sign in.
There are too many users signed in
User1 Active
User2 Active
() Force disconnect of the userHi,
In addition you can also refer following article for RDL configuration.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Configure Job Server [NOT INSTALLED] in Linux
Hello All,
I installed IPS and DS 4.3 SP3 on it in Tomcat in linux environment .
In server manager i found "Configure Job Server [NOT INSTALLED]"
So how do i install this component.
Regards,
AisuryaHi Puhan,
Please refer the below steps for configuration of Job Server:
(a) Log in Linux
(b) Go to BODS Directory
(c) Run below command
$ . ./al_env.sh
$ ./svrcfg
(d) Below details will appear
** Data Services Server Manager Utility **
1 : Control Job Service
2 : Configure Job Server
3 : Configure Runtime Resources
4 : Configure Access Server
5 : Configure SNMP Agent
6 : Configure SMTP
7 : Configure SSL
8 : Configure Native Component Supportability
x : Exit
(e) Enter 2
(f) Then Enter the New Job Server name: JOb_Server
(g) Then Enter Port Number:3500 (Enter Port Number as per your environment)
(h) Then SNMP Enable: Y
(i ) Then Adapter management
Port Number: 4001 (Enter Port Number as per your environment)
(j) SSL Protocol: Y
(k) Enable SNMP: N
(l) Now Enter Database details
After that below page will update with JOb Server Information associated with Local repository
Hope this will help!!!!
Thanks,
Daya -
The server process could not be started because the configured identity is incorrect
Good morning
I have the same problem as here, every moning i must writing pasword.
https://social.msdn.microsoft.com/Forums/en-US/f95ee480-dda1-42fd-96af-596531e7ac2e/the-server-process-could-not-be-started-because-the-configured-identity-is-incorrect?forum=windowstransactionsprogramming
But my configuration is the same as was answer in this post, may be you can help me with another idea?. Thanks.
Windows 2008 R2 64BitBoth machines start with an automatic login so technically there is an interactive user.
Nevertheless, it is an interesting point. i will try to configure the applications to run under a particular user and see if that changes anything.
Thank you
Peter -
Is there a way to configure AAA to try next server if "user not found" hits?
does IOS support a way to skip to next AAA server if "user not found" is reached?
Need to have AAA/tacacs+ try local if no user is found.Hi there,
The authentication source sequence is typically configured on the RADIUS server. tacacs+ is probably the same.
The IOS aaa new-model authentication sequence will only itterate to the next source if the previous one is unreachable.
cheers,
Seb. -
Connecting to Samba server "cannot be copied ...there is not enough space"
I have a user running OS X 10.4.11 who suddenly can no longer connect to our departmental Samba server. To be more specific, he connects just fine - but when he connects, it tells him "zero KB available" and if he tries to copy a file (a very small file) to the server, it gives him the error message:
+the item cannot be copied because there is not enough space+
I know for a fact that the problem is NOT a problem with the server nor userid because:
* the server has 7.5 TB of space available
* I can connect to the server from another Mac (running OS X 10.5) and can write/copy all the files my little heart desires.
Suggestions?Couple of ideas...
In Finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
Trash this file & reboot...
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist -
Software Updates Failing - Group Policy Overwritten - Server and Policy NOT CONFIGURED
I have seen a few posts about this issue and group policy overwriting the settings needed by SCCM with the wrong WSUS server. I checked the wuahandlerlog and found this error but it didnt have the server information.
"Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED"
The only coputer policy that applies to this system does not have WSUS entries in it. Windows update runs ok, and I deleted the WSUS registry keys that were set by a script and reinstall the client still getting the same error. I dont see any GPO local or domain, or reg keys that are setting anything. I have 10 other servers is the same AD container that this is working perfecly on.......
Suggestions????Check out this GPO:
Computer Configuration -> Administrative Templates -> System -> Group Policy:
"Turn off Local Group Policy Objects processing"
The help text:
"This policy setting prevents Local Group Policy Objects (Local GPOs) from being applied.
By default, the policy settings in Local GPOs are applied before any domain-based GPO policy settings. These policy settings can apply to both users and the local computer. You can disable the processing and application of all Local GPOs to ensure that only
domain-based GPOs are applied.
If you enable this policy setting, the system does not process and apply any Local GPOs.
If you disable or do not configure this policy setting, Local GPOs continue to be applied.
Note: For computers joined to a domain, it is strongly recommended that you only configure this policy setting in domain-based GPOs. This policy setting will be ignored on computers that are joined to a workgroup."
Rolf Lidvall, Swedish Radio (Ltd) -
The message
Domain not configured
This domain points to a Wikimedia Foundation server, but is not configured on this server.
That’s all we know.
Keeps appearing for different sites I use. First it was Facebook then Fanfiction.net and others.
It's driving me nuts. I'm fine and going about my business on either site and then I go to a new page and boom I get slapped with that "Domain not configured" message and can not access the page or any other page under that domain name.
I've cleared my cookies, history and other private data on all three of the Internet applications I use (Safari, Chome, Firefox) and I still can not access those pages on any Internet app.
I don't understand it and I'm really starting to hate wikipedia.
Any help is much appreciated. I'm running out of hair to pull.
10.8.2 on a Macbook Pro Retina.Please read this whole message and be sure you understand all of it before doing anything. Back up all data before making changes to your settings.
Write down the server addresses.
Click Cancel to close the Advanced sheet. Unlock the preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Open the DNS tab again and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself.
2. I’m not advocating Google or anything else as a DNS provider; the server addresses are offerred merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist. -
When configuring a server the 'version' pull down is not populated
When configuring a server the 'version' pull down on the second tab is not populated preventing me from continuing.
Settings:
server name = cfusion
app server = Jrun
host name = localhost (or cfusion, same results)
port = 80
Context Root = /
app server name = cfusion
Server home = C:\ColdFusion9
doc root = C:\ColdFusion9\wwwroot
I am evaluating this for our development team. If I can't get it to work, no sale.There is no way to avoid that the contentlib will be placed on the site server.
I don‘t agree that storage cost is high. It might be true for fast storage, but that‘s not needed for it.
Torsten Meringer | http://www.mssccmfaq.de -
Jdeveloper 11.1.1.6.2 is "NOT" allowing to configure application server
when configuring application server on local Jdev (11.1.1.6.2) > Build JDEVADF_11.1.1.6.2_GENERIC_120329.1447.6268 on Windows 7
i get below error
===================================================
Dec 29, 2012 12:52:35 AM oracle.security.jps.internal.common.util.XmlSchemaValidationUtil$StrictErrorHandler warning
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: line 3 column 96.
Problem invoking WLST - Traceback (innermost last):
File "C:\oracle\Jdev111162\JDEV_INSTALL\jdeveloper\fadev\bin\FADevExtendDefaultDomain.py", line 583, in ?
File "C:\oracle\Jdev111162\JDEV_INSTALL\jdeveloper\fadev\bin\FADevExtendDefaultDomain.py", line 253, in extendDomain
File "C:\Users\krathanr.ST-IDC\AppData\Local\Temp\WLSTOfflineIni7049264434314395379.py", line 89, in addTemplate
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:420)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: unable to parse "template-info.xml" from template jar "C:\oracle\JDEV11~1\JDEV_I~1\jdeveloper\common\templates\applications\oracle.bicomposer.slib_template_11.1.1.jar
===================================================
Please help.
Thanks
KrishnaKumarDoes this happen the first time you start the wls?
Or have you first started the wls and then tried to extent it?
Timo -
My Samba server stopped working and I have no idea why.
I set up a samba server once I got arch installed and it was working like a boss for about a month. Then one day (i think the machine may have rebooted) it just stopped working. I can't access my samba share from any of my other machines (all running Windows 7). I hadn't changed anything so I don't know what the culprit is. I did some update and looked at the smb.conf file but everything seems to be in order. I also tried to connect with smbclient from the machine itself and I get an NT_STATUS_CONNECTION_REFUSED error.
What's going on?
Here is my smb.conf
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = Vault Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
interfaces = 192.168.1.109
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
;# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
[proraid]
comment = ProRaid Share
path = /proraid
public = yes
available = yes
brosable = yes
read only = no
writable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765Hi,
My thought is to check the current IP of the server, as your smb.conf has the line interfaces = 192.168.1.109 which means samba will only listen on that interface for requests. If the IP of the server has changed, that would explain why samba isn't working. -
Setup problem - sql server 2014 - "could not find the database engine startup handle" - 0x851a0019
I tried to install ,deleted and re-installed several times and no help at all.
visual studio 2013 with update 2 rc and adk installed in my computer.
error code: 0x851a0019
error messege in setup: could not find the database engine startup handle
edition: Microsoft SQL Server 2014 Enterprise (Evaluation)
logs:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 13:53:29
End time: 2014-04-03 14:47:48
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ARIELUBA-PC
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS Database Engine Services 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS SQL Server Replication 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 ADK MSSQL11.ADK Database Engine Services
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 ADK MSSQL11.ADK SQL Server Replication
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3412.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Arie Luba\Downloads\WS2012R2DC\SQLServer2014-x64-ENU\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Hebrew_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: ARIELUBA-PC\Arie Luba
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Hebrew_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\SystemConfigurationCheck_Report.htm
2014-04-03 14:14:28.01 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Enterprise Evaluation Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2014-04-03 14:14:28.01 Server UTC adjustment: 3:00
2014-04-03 14:14:28.01 Server (c) Microsoft Corporation.
2014-04-03 14:14:28.01 Server All rights reserved.
2014-04-03 14:14:28.01 Server Server process ID is 7148.
2014-04-03 14:14:28.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron N5110'.
2014-04-03 14:14:28.01 Server Authentication mode is WINDOWS-ONLY.
2014-04-03 14:14:28.01 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-04-03 14:14:28.01 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-04-03 14:14:28.01 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-04-03 14:14:28.01 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
-m "SqlSetup"
-Q
-q "Hebrew_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-03 14:14:28.28 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-03 14:14:28.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-03 14:14:28.28 Server Detected 8099 MB of RAM. This is an informational message; no user action is required.
2014-04-03 14:14:28.28 Server Using conventional memory in the memory manager.
2014-04-03 14:14:28.31 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2014-04-03 14:14:28.34 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-04-03 14:14:28.36 Server Query Store settings initialized with enabled = 1,
2014-04-03 14:14:28.36 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-03 14:14:28.36 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-03 14:14:28.38 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-03 14:14:28.39 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-03 14:14:28.39 spid8s Warning ******************
2014-04-03 14:14:28.39 spid8s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-03 14:14:28.40 spid8s Starting up database 'master'.
2014-04-03 14:14:28.42 Server Software Usage Metrics is disabled.
2014-04-03 14:14:28.48 Server CLR version v4.0.30319 loaded.
2014-04-03 14:14:28.56 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-03 14:14:28.62 spid8s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.63 spid8s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.64 spid8s SQL Trace ID 1 was started by login "sa".
2014-04-03 14:14:28.64 spid8s Server name is 'ARIELUBA-PC'. This is an informational message only. No user action is required.
2014-04-03 14:14:28.65 spid16s Password policy update was successful.
2014-04-03 14:14:28.66 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-04-03 14:14:28.66 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-03 14:14:28.66 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-03 14:14:28.67 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-03 14:14:28.67 spid16s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
________________________________________________________________________________________________Is it okay? (see below)
;SQL Server 2014 Configuration File
[OPTIONS]
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Detailed help for command line argument ROLE has not been defined yet.
ROLE="AllFeatures_WithDefaults"
; Use the /ENU parameter to install the English version of SQL Server on your localized Windows operating system.
ENU="True"
; Parameter that controls the user interface behavior. Valid values are Normal for the full UI,AutoAdvance for a simplied UI, and EnableUIOnServerCore for bypassing Server Core setup GUI block.
UIMODE="Normal"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only, without any user interaction.
QUIETSIMPLE="False"
; Specify whether SQL Server Setup should discover and include product updates. The valid values are True and False or 1 and 0. By default SQL Server Setup will include updates that are found.
UpdateEnabled="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; If this parameter is provided, then this computer will use Microsoft Update to check for updates.
USEMICROSOFTUPDATE="False"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, MDS, and Tools. The SQL feature will install the Database Engine, Replication, Full-Text, and Data Quality Services (DQS) server. The Tools feature
will install Management Tools, Books online components, SQL Server Data Tools, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,DQ,AS,RS,RS_SHP,RS_SHPWFE,DQC,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,DREPLAY_CTLR,DREPLAY_CLT,MDS
; Specify the location where SQL Server Setup will obtain product updates. The valid values are "MU" to search Microsoft Update, a valid folder path, a relative path such as .\MyUpdates or a UNC share. By default SQL Server Setup will search Microsoft Update
or a Windows Update service through the Window Server Update Services.
UpdateSource="MU"
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify the root installation directory for shared components. This directory remains unchanged after shared components are already installed.
INSTALLSHAREDDIR="C:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components. This directory remains unchanged after WOW64 shared components are already installed.
INSTALLSHAREDWOWDIR="C:\Program Files (x86)\Microsoft SQL Server"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services
(RS).
INSTANCENAME="MSSQLSERVER"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will incorporate the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; The computer name that the client communicates with for the Distributed Replay Controller service.
CLTCTLRNAME="SQLDRC"
; The Windows account(s) used to grant permission to the Distributed Replay Controller service.
CTLRUSERS="ARIELUBA-PC\Arie Luba"
; The account used by the Distributed Replay Controller service.
CTLRSVCACCOUNT="NT Service\SQL Server Distributed Replay Controller"
; The startup type for the Distributed Replay Controller service.
CTLRSTARTUPTYPE="Manual"
; The account used by the Distributed Replay Client service.
CLTSVCACCOUNT="NT Service\SQL Server Distributed Replay Client"
; The startup type for the Distributed Replay Client service.
CLTSTARTUPTYPE="Manual"
; The result directory for the Distributed Replay Client service.
CLTRESULTDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir"
; The working directory for the Distributed Replay Client service.
CLTWORKINGDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir"
; RSInputSettings_RSInstallMode_Description
RSINSTALLMODE="DefaultNativeMode"
; RSInputSettings_RSInstallMode_Description
RSSHPINSTALLMODE="SharePointFilesOnlyMode"
; Specify the installation directory.
INSTANCEDIR="C:\Program Files\Microsoft SQL Server"
; Agent account name
AGTSVCACCOUNT="NT Service\SQLSERVERAGENT"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Manual"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT Service\MsDtsServer120"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT Service\MSSQLServerOLAPService"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Hebrew_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Specifies the server mode of the Analysis Services instance. Valid values are MULTIDIMENSIONAL and TABULAR. The default value is MULTIDIMENSIONAL.
ASSERVERMODE="MULTIDIMENSIONAL"
; CM brick TCP communication port
COMMFABRICPORT="0"
; How matrix will use private networks
COMMFABRICNETWORKLEVEL="0"
; How inter brick communication will be protected
COMMFABRICENCRYPTION="0"
; TCP port used by the CM brick
MATRIXCMBRICKCOMMPORT="0"
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="Hebrew_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT Service\MSSQLSERVER"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Provision current user as a Database Engine system administrator for %SQL_PRODUCT_SHORT_NAME% Express.
ADDCURRENTUSERASSQLADMIN="True"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT Service\ReportServer"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Add description of input argument FTSVCACCOUNT
FTSVCACCOUNT="NT Service\MSSQLFDLauncher" -
How to configure multiple smtp servers per domain
Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh -
Server repository could not create function template for ...
Hello,
we are trying to send rfc and idocs from SAP to MII but we always get errors like:
Server repository could not create function template ...
or
The meta data for the IDoc type "HRCC1DNPERSO01" is unavailable.
Has anyone an idea?
Kind Regards,
Christoph MertinsHi Christoph,
Per the resolution of the CSS Ticket:
Parameters that are not mentioned in the SDN guide were needed in your particular situation.
The necessary parameters for configuring the MII side of the IDoc Listener are explained in the MII Help Documentation in the Client Properties section:
http://help.sap.com/saphelp_xmii120/helpdata/en/45/a705b23c14532ae10000000a1553f7/content.htm
All others are described in the Message Listeners section here:
http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/content.htm
Can you please update this post to reflect your particular situation so the SDN community can benefit from your experience?
Kind Regards,
Diana Hoppe
Edited by: Diana Hoppe on Dec 9, 2008 9:06 AM
Maybe you are looking for
-
I just installed the latest software update and now I can't open Mail 4.5. This is a Mini 2,1 using OSX 10.6.8.
-
Brand new Intel iMac with hard drive failure?
I have a two week old iMac. I shut it down last night. When I started it this morning I got a folder with a question mark. I had no warnings or indications of any problems prior to this. I had just loaded some Disney pictures and have no backup of th
-
Is it possible to connect labview with opc server without using NI dsc Module ?
Hellow sir, I want to get data over labview using OPC server and i am not using any dsc module vi (Alams, print, GUI, security).I am using share variable to get data from OPC server to labview. Now i want to deploy that application to third party com
-
Hi all I want to display an alert in my model. How can i do this? Can u help me? Thanks &Regards Hemalatha
-
Out of Office on OWA; Exchange 2010
We recently migrated from Exchange 2003 to Exchange 2010 and were having issues with out of office. OOF works fine in outlook but when you try and run it from OWA we get internal server error 500. The OOF URL was pointing to the internal machine and