Configuring EAP-FAST to use with Symbol MC3090

I have configured EAP-FAST local authentication on a 5508 running 7.0.116.0.  I am trying to connect using a motorola/symbol MC3090.  In the handheld, It appears to be failing due to receiving no PAC.  On the 5508, it just looks like a timeout.  Are the PACs created on the 5508 automatically, or do I need to generate one? 

From config guide :
If you want to enable anonymous provisioning, select the
Anonymous Provision
check box. This feature allows PACs to be sent automatically to clients  that do not have one during PAC provisioning. If you disable this  feature, PACS must be manually provisioned. The default setting is  enabled.
Some clients don't support Anonymous PAC Provisioning. You should check about your motorola

Similar Messages

  • Configuring Cisco Router for use with Syslog Server

    Configuring Cisco Router for use with Syslog Server:
    Does anyone know of a good doc for this?
    -Ashley

    Start with that one: http://security-planet.de/wp-content/uploads/2008/12/logging-ios.pdf
    And if you need more informations, just ask what you want to achieve.
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • Configuration of XSQL for use with non-Oracle dbs

    If anyone has positive experiences with configuring XSQL for use with non Oracle databases I'd like to hear how they did it, see tutorials, configuration files, etc.
    Specifically setting up to use MySQL or Postgresql on Linux/FreeBSD would be very interesting.
    Also, does anyone use this without setting mime types? How would you go about this so you could point to the relevant servlets in the page?
    Josh

    I don't understand how setting up for Non-Oracle DB's is related to not setting up the servlet as an extension-mapped servlet.
    It might work, but would you run JSP's
    that way? XSQL behaves very similiarly
    inside to how a JSP runner works, which
    wants to be servlet-mapped.
    However, OAS 4.0.8.1 does not support
    extension mapping and XSQL works there
    so i'm assuming it would work on other
    servers set up that way. It's not
    a configuration we test/certify.
    null

  • Configuration management (LO-CM) used with Variant configuration (LO-VC)

    Hi
    I am new to SAP, working with Variant configuration (LO-VC).
    I wish to enforce configuration management during development of a new Variant configurator.
    Would Configuration management (LO-CM) work together with Variant configuration (LO-VC)?
    My expectation is that SAP Configuration management (LO-CM) will work similar to solutions like e.g. MsVisualSourceSafe, SubVersion, CVS, IBM/Rational ClearCase etc. in the software development domain.
    best regards Henrik

    Hi Amber
    Thanks a lot for answer, and please apologize my late response.
    I am not confused by the term 'configuration', being used in two different meanings.
    (1) Variant configuration (VC) is the dicipline of creating product variants by making a set of choises from the characteristics describing the product. A complete and consistent set of choises is a 'configuration'.
    (2) Configuration Management in the 'traditional' software development meaning: Software Configuration Management (SCM). E.g. Microsoft VisualSourceSafe, IMB/Rational ClearCase, Subversion etc. are examples of tools used for the kind of SCM I wish to apply to VC models.
    My confusion is whether the SAP CM that I can read about in the SAP online help, is similar to traditional SCM, and whether it can be applied to VC models.
    I wish to apply SCM to a VC model. All the objects that together make up the VC model may then each exist in various versions (version control). A complete set of the objects (in a given version) make up a configuration of the VC model.
    What is achieved is : you can control the development of VC model in just the same way that all serious software is under the control of SCM. This will allow an evolution of the VC model, like e.g. version 1.0 is released in January, then version 1.1 is released in June. A major upgrade of the model may become version 2.0 in December etc. The 'source code' (the objects) of each of the versions can be retrieved at any time from the SCM system. Also with SCM several developers may work on the same VC model at the same time, and merge their individual work into the same model.
    This is very different from todays VC model development. In todays VC model development, only one version exists, that is 'todays version'. Any change to the model is released immediately, and you can undo model changes only if you remember what it was like a little while ago.
    We do develop and test VC models in one SAP system, and then move them to the production system. This is however still very far from the benefits of SCM.
    best regards
    Henrik Saugbjerg

  • How to configure MySQL to be used with J2EE 1.3.1 -- Very Very URGENT.

    Hi All,
    I have downloaded Sun's J2EE reference implementation 1.3.1. I want to use MySQL as my database instead of the default database Cloudscape that comes with J2EE SDK 1.3.1. Can any one help me configuring in doing the same.
    Thanks and regards,
    Venky.

    Hi! I had the same problem, too. I�m Brazilian and I�ve been learning the English language yet, but I�ll try to describe how to configure J2EE with MySQL.
    I am using MySQL version 4.1.7 with J2EE version 1.3 on Windows XP Professional. The driver version of MySQL is 3.0.16.
    You have to configure the following two files:
    - <J2EE_HOME>\bin\setenv.bat
    - <J2EE_HOME>\config\resource.properties
    Do the following steps:
    1) Copy the JAR file of MySQL driver (mysql-connector-java-3.0.16-ga-bin.jar) to <J2EE_HOME>\lib directory.
    2) In <J2EE_HOME>\bin directory open the setenv.bat file and analize the code. It is not hard to understand the code, it is just the classpath configuration of J2EE. After understand it, add a reference of MySQL driver (mysql-connector-java-3.0.16-ga-bin.jar), that was copied to <J2EE_HOME>\lib directory.
    3) Run the <J2EE_HOME>\bin\j2eeadmin.bat to configure the resource.properties file.There are two command lines to be executed, as below:
    - j2eeadmin.bat -addJdbcDriver <CLASS NAME OF THE DRIVER>
    - j2eeadmin.bat -addJdbcDatasource <JNDI NAME> <URL>
    For example:
    - j2eeadmin.bat -addJdbcDriver "com.mysql.jdbc.Driver"
    - j2eeadmin.bat -addJdbcDatasource "jdbc/mysql/test" "jdbc:mysql://localhost/test?user=username&password=pass"
    4) After run j2eeadmin.bat, the resource.properties file will be modified. But when I did it and when I executed the verbose command to start J2EE, some error messages was exhibited. So I decided to open the resource.properties file and I noticed that the character "\" was added erroneously in a lot of places of the code. It did not seem correct, so I decided to remove these characters replacing them. Bingo!!! After I did it, I run verbose again and no more message error ocurred. I think it is a bug of J2EE.
    Finish! I modified the datasource JNDI to access MySQL and then I run my EAR application. No problems occurred. My application is running succesfully.
    Good luck!

  • Is there a universal way to configure time capsule for use with magic jack plus?

    I've got the magic jack plus connected to my time capsule.  Works most of the time, but lately it's been dropping calls or I'll get error messages stating to check the internet connection.  Most say its related to the router settings.

    Note I do not own magic jack but it looks like a standard ATA voip adapter.
    How is the TC setup in the network? ie is it bridged or main router.. Is there another router?
    Being a non-apple product you will do better sticking with SMB compliant network names.. ie short no special characters no spaces.. Apple by default break these rules.
    Also you may have port forwarding issues.. apple do not use upnp most windows and non-apple products will expect and so you might have to open the required ports not just for sip but the actual call RDP packets.
    Even if you do open ports apple routers often break port forwarding. You might find it is easier to use a modem router or alternative standard router and bridge the TC.
    Look at posts that deal with issues which will be common with airport extreme.
    https://discussions.apple.com/thread/3662236?start=0&tstart=0
    I would say it is not working because you have not forwarded the required ports.. or it just doesn't like Apple routers.. plugged into the Mac, the networking is handled by the Mac.. and is able to auto open ports.. non-apple products cannot generally do that.

  • Configure SQL Developer for use with SSL

    Having trouble getting this working, Can someone point me towards the necessary steps or things to check?

    Search for the other posts about "SSL" in this forum, useful info and tips there.
    Have fun,
    K.

  • EAP-FAST with local radius on 1242AG

    I'm trying to get EAP-FAST working using the local radius server on a 1242AG autonomous AP using the latest firmware from Cisco. The cypher I'm using is CCMP. LEAP works fine with all my clients, however if I move to EAP-FAST in the radius config my clients fail to authenticate
    I know I need to set PAC to automatic somewhere, but the EAP-FAST configuration in the 1242AG GUI doesn't make this clear what to do.
    Any help or a basic example you be great.
    thanks,
    Simon

    I think this is what you're looking for;
    Local EAP Authentication on the Wireless LAN Controller with EAP-FAST and LDAP Server Configuration Example
    http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml
    HTH
    Regards,
    Jatin
    Do rate helpful posts~

  • Is there a plan to update Configurator for use with InDesign CC?

    Hi all,
    When will Configurator be available for use with InDesign CC... Is there a plan to update it in the near future to be compatible with ID CC?
    Thank you so much:)
    Christine

    shane.daley wrote:
    I have recently purchased an iPad Air 2 and to increase useability purchased a Logitech +type bluetooth keyboard. I'm very happy with both but disappointed in the lack of autocorrect function between the bluetooth keyboards (not a logitech deficiancy) and iOS.
    Is there a plan to fix this please?!
    Is that because you also ask the same question to Logitech and that was their response, since you're using a 3rd party software

  • New video posted on IAC Driver configuration and use with Mainstage/Logic

    Shows how to configure IAC Driver for use with Mainstage and Logic.
    http://www.youtube.com/watch?v=wPhtRCwz8vs

    No problem, anytime...
    Yes, that should work. I haven't specifically tried that but don't see why it wouldn't work so give it a go. When I was testing this IAC driver method, I did confirm that the IAC object existed in the environment in Logic and it did, so you should be good to go.
    You're exactly right, both Logic and Mainstage should be active. You'll get a message saying another Rewire host is active when you open both, but just click ok and ignore it.
    Here are a couple of other vids as example of what you can do with the IAC driver just to keep your brain burning
    http://www.youtube.com/watch?v=XgzBOJYSY64
    http://www.youtube.com/watch?v=NZL0ucV8dpo
    If I have time I'll try to test it as well, it's a good idea!
    Let me know how it goes or if you have any questions.
    J.

  • WGB and EAP-FAST

    I try to authenticate a 1300 Worgroup bridge with EAP-FAST.
    Using ACS 3.3(2) Build 2 and 1231 AP's with WDS.
    Is there anyone who has tried this configuration. Ordinary wireless clients are OK.

    Hi,
    a workgroup bridge support only LEAP als EAP Client for EAP authentication.
    You have no option to integrate a PAC File to the device in workgroup bridge mode.
    Look at this link:
    http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a00804158b3.html#wp1055422

  • EAP-Fast-Windows XP

    Hi,
    Can I use windows XP to configure EAP-Fast? or
    is EAP-FAST only configured on the ACU 6.3 utility.
    I have a different vendor wireless card with a AP1200.
    I want to use EAP-Fast.
    Is this possible or do I need to use PEAP or EAP-TLS?
    regds
    Johnny

    Only the Cisco ACU with the EAP-FAST supplicant can be configured for this. There is a purpose revision to the Cisco Aironet extensions(version 3) that is suppose to support EAP-FAST. But unfortunately there is no release date for this at this time. Probably 6+ months.
    Hope this helps.

  • EAP-TLS and EAP-FAST

    Hi NetPro.
    EAP-TLS is working now, but how to configure EAP-FAST as the backup in case TLS is failure then user still able to use FAST as the second choice ?
    your reply will be highly appreciated.
    thanks heaps.
    Jack

    All you really need to do is enabled EAP-FAST on the Radius server. If you are running a controller environment there isn't any changes on the controller needed. If you are running autonomous make sure you have both "authentication open..." and "authentication network-eap..." configured under the SSID. They only thing that would need to be changed would be the client. You could setup two profiles, one for TLS and the other for EAP-FAST.

  • EAP-Fast

    Hi,
    I have a AP1100 and a repeater AP1100. The AP acts as a Radius server and the clients (all AIR-350) use LEAP, WPA and TKIP. Everything works just fine.
    Now I want to secure my environment a bid more and make use of EAP-Fast. I can't get it work. At the authetication process, it sticks at provisioning. The log at the AP only shows: debugging; Station xxxxx: Authentication failed.
    Does anybody have a clue what I'm doing wrong or is it because the AP is the Radius server i.c.w. EAP-Fast ?
    Thanks,
    Auden

    Cisco Secure ACS is listed as a Prerequisite and in the Required Hardware and Software section;
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a0080262422.html#wp998531
    hth
    Required Hardware and Software
    The following software and hardware are required for configuring EAP-FAST.
    Cisco Aironet Client Utility (ACU) and Aironet
    •Aironet Client Utility version 6.3
    •Cisco Aironet 350 Series Client Adapter
    •Client adapter firmware version 5.40
    •Client driver version 8.5
    •Aironet Client Monitor (ACM) version 2.3
    •Windows XP, SP1
    Cisco Aironet Access Point
    •Cisco Aironet 1100 Series Access Point
    •Cisco IOS Software Release 12.2(13)JA3
    •CiscoSecure Access Control Server (ACS)
    •CiscoSecure ACS v3.2.3 for Windows 2000 SP4
    •Aironet Configuration Administration Tool (ACAT) (optional)
    •Cisco Aironet ACAT v1.3

  • Cannot use IP-phone-7921 with EAP-Fast using internal WLC Radius

    Hello,
    I Cannot authenticate IP-phone when I use internal WLC-radius with a profile "eap-fast"
    The eror message I recieved on a debug is:
    *Mar 09 03:15:09.765: Unable to find requested user entry for anonymous
    But of course there is a user configured on my ipphone !
    Note1 : I use a WLC with version : AIR-4400-K9-5-1-163-0 (AES)
    Note2: When I use LEAP it is OK
    Note3: When I try with my PC to autenticate in eap-fast with internal WLC radius, it is OK.
    See attacehement for more detail.
    Many thanks in advance.
    Michel Misonne
    *Mar 09 03:15:09.765: Unable to find requested user entry for anonymous

    ABSOLUTLEY DO NOT DO THIS!
    config advanced eap identity-request-timeout 120
    config advanced eap identity-request-retries 20
    config advanced eap request-timeout 120
    config advanced eap request-retries 20
    This can cause you issues for up to 40 minutes. 20 attempts * 2 minutes apart
    Please take a look at
    https://supportforums.cisco.com/docs/DOC-12110
    config advanced eap identity-request-timeout 5
    config advanced eap identity-request-retries 12
    config advanced eap request-timeout 5
    config advanced eap request-retries 12
    would be much better, as it is only 60 seconds.  No device should take longer than 5 seconds to respond, but sometimes the phones need more than the 1 second default.
    HTH,
    Steve

Maybe you are looking for